Elastic Solutions of Graded Piezoelectric Hollow Cylinders

2006 ◽  
Vol 302-303 ◽  
pp. 658-668 ◽  
Author(s):  
Zhifei Shi ◽  
Tao Tao Zhang
Keyword(s):  
Exact Solutions ◽  
Hollow Cylinder ◽  
Hypergeometric Functions ◽  
Piezoelectric Materials ◽  
Functionally Graded ◽  
Displacement Method ◽  
External Voltage ◽  
Hollow Cylinders

In the present paper, two kinds of thick-walled hollow cylinders are studied. One is the cylinder with multi-layers and another is functionally graded cylinder. Both the cylinders are made of piezoelectric materials. Based on the basic piezoelectric equations, the exact solutions for the elastic hollow cylinder with N-layers submitted to external voltage are obtained. For the graded hollow cylinder the exact solutions are obtained by using displacement method and three hypergeometric functions. Comparisons demonstrate that the limitation of the multilayer cases is consistent with that of graded cases.

Multiphysics of Multilayered and Functionally Graded Cylinders Under Prescribed Hygrothermomagnetoelectromechanical Loading

2013 ◽  
Vol 81 (4) ◽  
Author(s):  
A. H. Akbarzadeh ◽  
D. Pasini
Keyword(s):  
Steady State ◽  
Exact Solutions ◽  
Cross Section ◽  
Functionally Graded ◽  
Governing Equations ◽  
Multilayered Cylinder ◽  
Hollow Cylinders ◽  
Insight Into ◽  
Circular Disks ◽  
Long Cylinder

This paper examines the multiphysics of multilayered and functionally graded cylinders subjected to steady-state hygrothermomagnetoelectromechanical loading. The cylinder is assumed to be axisymmetric, infinitely long, and with either hollow or solid cross section that is, both polarized and magnetized radially. The multiphysics model is used to investigate the effect of moisture, temperature, magnetic, electric, and mechanical loadings. The influence of imperfectly bonded interfaces is also accounted for in the governing equations. Exact solutions of differential equations are obtained for each homogenous layer of the multilayered cylinder. The results are verified with those available in literature for a homogenous infinitely long cylinder and can also be applied to study the multiphysics of thin circular disks. Maps are presented for solid and hollow cylinders to visualize the effect of hygrothermomagnetoelectromechanical loading, heterogeneity of bonded layers, and imperfectly bonded interfaces. The plots offer insight into the behavior of heterogeneous magnetoelectroelastic media in a steady state hygrothermal field.

scholarly journals Semi-Analytical Solution of Functionally Graded Circular Short Hollow Cylinder Subject to Transient Thermal Loading

2014 ◽  
Vol 61 (3) ◽  
pp. 409-432 ◽  
Author(s):  
Jafar Eskandari Jam ◽  
Y. Rahmati Nezhad
Keyword(s):  
Analytical Solution ◽  
Hollow Cylinder ◽  
Thermal Loading ◽  
Thermal Stresses ◽  
Functionally Graded ◽  
Thermal Boundary Conditions ◽  
Numerical Laplace Inversion ◽  
Time Variations ◽  
Hollow Cylinders ◽  
Transient Thermal

Abstract In this paper, by using a semi-analytical solution based on multi-layered approach, the authors present the solutions of temperature, displacements, and transient thermal stresses in functionally graded circular hollow cylinders subjected to transient thermal boundary conditions. The cylinder has finite length and is subjected to axisymmetric thermal loads. It is assumed that the functionally graded circular hollow cylinder is composed of N fictitious layers and the properties of each layer are assumed to be homogeneous and isotropic. Time variations of the temperature, displacements, and stresses are obtained by employing series solving method for ordinary differential equation, Laplace transform techniques and a numerical Laplace inversion.

Axial guided wave characteristics in functionally graded one-dimensional hexagonal piezoelectric quasi-crystal cylinders

2021 ◽  
pp. 108128652110134
Author(s):  
B. Zhang ◽  
X.H. Wang ◽  
L. Elmaimouni ◽  
J.G. Yu ◽  
X.M. Zhang
Keyword(s):  
Coupling Effect ◽  
Energy Conversion Efficiency ◽  
Guided Wave ◽  
Functionally Graded ◽  
Phonon Modes ◽  
One Dimensional ◽  
Longitudinal Modes ◽  
Wave Characteristics ◽  
Piezoelectric Effects ◽  
Hollow Cylinders

In one-dimensional hexagonal piezoelectric quasi-crystals, there exist the phonon–phason, electro–phonon, and electro–phason couplings. Therefore, the phonon–phason coupling and piezoelectric effects on axial guided wave characteristics in one-dimensional hexagonal functionally graded piezoelectric quasi-crystal (FGPQC) cylinders are investigated by utilizing the Legendre polynomial series method. The dispersion curves and cut-off frequencies are illustrated. Wave characteristics in three hollow cylinders with different quasi-periodic directions are comparatively studied. Some new wave phenomena are revealed: the phonon–phason coupling and piezoelectric effects on the longitudinal and torsional phonon modes ( N = 0) vary as the quasi-periodic direction changes; the phonon–phason coupling effect on flexural–torsional modes in the r-, z-FGPQC hollow cylinders, and on flexural–longitudinal modes in ϑ-FGPQC hollow cylinders increases as N increases. The corresponding results obtained in this work lay the theoretical foundation for the design and manufacture of piezoelectric transducers with high resolution and energy-conversion efficiency.

scholarly journals Thermoelastic analysis of FGM hollow cylinder for variable parameters and temperature distributions using FEM

2020 ◽  
Vol 9 (1) ◽  
pp. 256-264
Author(s):  
Dinkar Sharma ◽  
Ramandeep Kaur
Keyword(s):  
Stress Field ◽  
Hollow Cylinder ◽  
Numerical Study ◽  
Axial Stress ◽  
Circumferential Stress ◽  
Functionally Graded ◽  
Gradient Index ◽  
Variable Parameters ◽  
Graded Material ◽  
Governing Differential Equation

AbstractThis paper presents, numerical study of stress field in functionally graded material (FGM) hollow cylinder by using finite element method (FEM). The FGM cylinder is subjected to internal pressure and uniform heat generation. Thermoelastic material properties of FGM cylinder are assumed to vary along radius of cylinder as an exponential function of radius. The governing differential equation is solved numerically by FEM for isotropic and anistropic hollow cylinder. Additionally, the effect of material gradient index (β) on normalized radial stresses, normalized circumferential stress and normalized axial stress are evaluated and shown graphically. The behaviour of stress versus normalized radius of cylinder is plotted for different values of Poisson’s ratio and temperature. The graphical results shown that stress field in FGM cylinder is influenced by some of above mentioned parameters.

The Higher Order Crack Tip Fields for Interfacial Crack between Linear Functionally Graded and Homogeneous Piezoelectric Materials

2014 ◽  
Vol 1015 ◽  
pp. 97-100
Author(s):  
Yao Dai ◽  
Xiao Chong ◽  
Ying Chen
Keyword(s):  
Piezoelectric Materials ◽  
Electric Displacement ◽  
Interfacial Crack ◽  
Crack Tip ◽  
Higher Order ◽  
Functionally Graded ◽  
Linear Functions ◽  
Intensity Factors ◽  
Crack Tip Fields ◽  
Functionally Graded Piezoelectric Materials

The higher order crack-tip fields for an anti-plane crack situated in the interface between functionally graded piezoelectric materials (FGPMs) and homogeneous piezoelectric materials (HPMs) are presented. The mechanical and electrical properties of the FGPMs are assumed to be linear functions of y perpendicular to the crack. The crack surfaces are supposed to be insulated electrically. By using the method of eigen-expansion, the higher order stress and electric displacement crack tip fields for FGPMs and HPMs are obtained. The analytic expressions of the stress intensity factors and the electric displacement intensity factors are derived.

Analysis of Elasticity Solution of Bi-Direction Functionally Graded Piezoelectric Beam Subject to Voltage

2012 ◽  
Vol 166-169 ◽  
pp. 824-827 ◽  
Author(s):  
Y Z Yang
Keyword(s):  
Hamiltonian System ◽  
Exact Solutions ◽  
Material Properties ◽  
Functionally Graded ◽  
Symplectic Method ◽  
Elasticity Solution ◽  
Numerical Examples ◽  
Piezoelectric Beam ◽  
Functionally Graded Piezoelectric

This paper presents symplectic method for the derivation of exact solutions of functionally graded piezoelectric beam with the material properties varying exponentially both along the axial and transverse coordinates. In the approach, the related equations and formulas are developed in terms of dual equations, which can be solved by variables separation and symplectic expansion in Hamiltonian system. To verify advantages of the method, numerical examples of bi-directional functionally piezoelectric beam are discussed.

Sign in / Sign up

Export Citation Format

Share Document