Cost Optimization of Abrasive Blasting Systems: A New and Effective Way for Using Blasting Nozzles

2007 ◽  
Vol 329 ◽  
pp. 323-328 ◽  
Author(s):  
Vu Ngoc Pi ◽  
A.M. Hoogstrate
Keyword(s):  
Cost Optimization ◽  
Nozzle Diameter ◽  
New Model ◽  
Nozzle Wear ◽  
Efficiency Cost ◽  
Cleaning Cost ◽  
Cost Components ◽  
Optimal Diameter ◽  
Comprehensive Study ◽  
Abrasive Blasting

This paper introduces a new and comprehensive study on cost optimization of abrasive blasting systems. In the study, the effects of many parameters such as nozzle diameter, air pressure, efficiency, cost components as well as the effect of the nozzle wear on the cleaning cost were investigated. A new model for calculation of the optimal exchanged nozzle diameter (called “optimal diameter”) was proposed. With “optimal diameter” a new and effective way of using and making blasting nozzles was proposed and both the cleaning cost and the cleaning time can be reduced significantly.

A Study on Cost Optimization of Steel Shot Blasting Systems

2011 ◽  
Vol 52-54 ◽  
pp. 568-572 ◽  
Author(s):  
Vu Ngoc Pi ◽  
Phan Chi Chinh
Keyword(s):  
Process Parameters ◽  
Cost Optimization ◽  
Nozzle Diameter ◽  
Shot Blasting ◽  
Steel Shot ◽  
Optimum Diameter ◽  
Nozzle Wear ◽  
Cleaning Cost ◽  
Cost Components ◽  
Pressure Nozzle

This paper introduces a new study on cost optimization of steel shot blasting systems. In the study, the influences of blasting process parameters such as air pressure, nozzle diameter, cost components as well as the effect of the nozzle wear on the cleaning cost were investigated. For calculation of the optimum exchanged nozzle diameter (called optimum diameter) a regression model was proposed. By using this model, both cleaning cost and cleaning time can be reduced considerably.

A Study on Multi-Objective Optimization of Abrasive Blasting Systems

2010 ◽  
Vol 126-128 ◽  
pp. 29-34 ◽  
Author(s):  
Vu Ngoc Pi ◽  
Tran Minh Duc
Keyword(s):  
Boron Carbide ◽  
Optimization Problem ◽  
Nozzle Diameter ◽  
Multi Objective Optimization ◽  
Multi Objective ◽  
Nozzle Wear ◽  
The Cost ◽  
Cost Components ◽  
Abrasive Blasting

This paper introduces a study on a multi-objective optimization problem of abrasive blasting systems. The aim of the study is to find the optimum exchanged diameter of boron carbide nozzles. In the study, the effects of several parameters such as the maximum nozzle diameter, the nozzle wear and the cost components on the optimum initial nozzle diameter were taken into account. From the study, a regression model for determination of the optimum initial diameter of boron carbide nozzles was introduced.

Profit Optimization of Abrasive Blasting Systems

2008 ◽  
Vol 389-390 ◽  
pp. 392-397 ◽  
Author(s):  
Vu Ngoc Pi
Keyword(s):  
Optimization Problem ◽  
Nozzle Diameter ◽  
Profit Rate ◽  
Nozzle Wear ◽  
Profit Optimization ◽  
Maximal Profit ◽  
The Cost ◽  
Cost Components ◽  
Abrasive Blasting

This paper presents a new study on profit optimization of abrasive blasting systems. In the study, the effects of many parameters such as the air pressure, the initial nozzle diameter, the cost components and the nozzle wear on the profit rate were investigated. Based on the results of the optimization problem, regression models for determination of the optimal exchanged nozzle diameter in order to get the maximal profit rate were proposed. With “optimal diameter”, both the profit rate and the cleaning time can be reduced significantly.

Profit Optimization of Steel Shot Blasting Processes

2013 ◽  
Vol 312 ◽  
pp. 976-981
Author(s):  
Vu Ngoc Pi ◽  
Pham Hong Thai ◽  
Tran Quoc Hung
Keyword(s):  
Optimization Problem ◽  
Nozzle Diameter ◽  
Profit Rate ◽  
Shot Blasting ◽  
Maximum Profit ◽  
Steel Shot ◽  
Nozzle Wear ◽  
Profit Optimization ◽  
Cost Components ◽  
Pressure Nozzle

This paper presents a study on profit optimization of steel shot blasting systems. In the study, the influences of blasting process parameters including air pressure, nozzle diameter, cost components as well as the effect of the nozzle wear on the profit of a cleaning process were investigated. Based on the results of the optimization problem, a regression model for calculation of the optimum exchanged nozzle diameter in order to get the maximum profit rate was proposed. By using the model, both the profit and the blasting time can be reduced considerably.

scholarly journals Optimizing Replaced Nozzle Diameter of Abrasive Blasting Systems Using Experiment Technique Design

2020 ◽  
Vol 10 (11) ◽  
pp. 3920 ◽  
Author(s):  
Ngoc-Pi Vu ◽  
Xuan-Hung Le ◽  
Dinh-Ngoc Nguyen ◽  
Anh-Tung Luu ◽  
Thanh-Tu Nguyen ◽  
...  
Keyword(s):  
Regression Model ◽  
Boron Carbide ◽  
Design Of Experiment ◽  
Nozzle Diameter ◽  
Cost System ◽  
Experiment Technique ◽  
The Cost ◽  
Cleaning Cost ◽  
Abrasive Blasting

The blasting technique has been broadly utilized to prepare new surfaces for painting, engraving, etc., in industry. In fact, the minimization of the cleaning cost system is essential. However, the knowledge of this technique in terms of optimization has been poor so far. The aim of this study is to find the optimum replaced boron carbide nozzle diameter for the abrasive blasting system. The basis of the study is to find the replaced nozzle diameter to minimize the cost of the blasting system. Seven main parameters are adopted for examining their influences on the response and the optimum replaced nozzle diameter. The design of experiment (DOE) technique is utilized by using Minitab@19. The results reveal that the initial nozzle diameter has the strongest impact on the optimum replaced nozzle diameter. Furthermore, the proposed regression model has been found to be entirely insistent to the experiments. The utilization of this model can provide an effective way to simplify the calculation of the optimum initial nozzle diameter for boron carbide.

scholarly journals Professional characteristics of an educator: A survey of literature

2013 ◽  
Vol 25 (1) ◽  
pp. 1-22
Author(s):  
J. Anitha ◽  
R. Krishnaveni
Keyword(s):  
Student Outcome ◽  
Wide Scope ◽  
Review Of Literature ◽  
New Model ◽  
Professional Characteristics ◽  
Wide Range ◽  
Made In ◽  
Comprehensive Study

Literature has shown that various studies have dealt with different professional features of teaching and they have focused on one or few professional characteristics of educators. In spite of the immense amount of literature on educator characteristics, a comprehensive study that would encompass the vital professional characteristics of an educator in total is lacking. This has instigated the researcher to take up the study to identify the professional characteristics of an educator. An attempt was made in identifying the educators' characteristics using student outcome as a boundary criterion to select the characteristics from among several that are available in the literature. Therefore, a new model of professional characteristics of educators was proposed. This paper discusses in detail, the characteristics of a profession in general and the wide range of educator’s characteristics as studied in previous researches. The paper presents a wide scope for the models developed to be studied in depth to appreciate and investigate more about the professional characteristics identified through this review of literature. The models may also be tested empirically for further accumulation of knowledge in the field.

Comparison Analysis of MAC Protocols for Wireless Sensor Networks

2020 ◽  
pp. 200-218
Author(s):  
Tapaswini Samant ◽  
Yelithoti Sravana Kumar ◽  
Swati Swayamsiddha
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Cost Optimization ◽  
Mac Protocols ◽  
Wireless Sensor ◽  
Practical Implementation ◽  
Bandwidth Utilization ◽  
Efficiency Cost ◽  
Efficient Criteria ◽  
Hybrid Protocols

Wireless sensor networks (WSN) are rapidly emerging as an interesting and challenging area of research in the field of communication engineering. This review work is different from other state-of-the-art literature as the MAC protocols discussed here are applicable both for homogeneous and heterogeneous networks. Performances like energy efficiency, cost optimization, throughput, bandwidth utilization, and scalability of the sensor network depend on MAC protocols, which are application-based. In the study, the authors have surveyed different MAC protocols with different merits and demerits. Based on the study, it is very hard to recommend any particular protocol as a standard for implementation as these are exclusively application dependent. The work can be further extended in terms of hybrid protocols, which may carry the advantages of the respective protocols along with energy-efficient criteria for practical implementation. Further cooperative WSN communication can be used for internet of things (IoT)-based systems, where the node placements and multi-operations concepts are of main concern.

Sign in / Sign up

Export Citation Format

Share Document