Prediction of Surface Roughness in High Speed Milling Process Using the Artificial Neural Networks

2007 ◽  
Vol 364-366 ◽  
pp. 713-718 ◽  
Author(s):  
Dong Woo Kim ◽  
Young Jae Shin ◽  
Kyoung Taik Park ◽  
Eung Sug Lee ◽  
Jong Hyun Lee ◽  
...  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Surface Roughness ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
High Speed ◽  
Back Propagation Algorithm ◽  
High Speed Milling ◽  
Artificial Neural ◽  
Cutting Path

The objective of this research was to apply the artificial neural network algorithm to predict the surface roughness in high speed milling operation. Tool length, feed rate, spindle speed, cutting path interval and run-out were used as five input neurons; and artificial neural networks model based on back-propagation algorithm was developed to predict the output neuron-surface roughness. A series of experiments was performed, and the results were estimated. The experimental results showed that the applied artificial neural network surface roughness prediction gave good accuracy in predicting the surface roughness under a variety of combinations of cutting conditions.

scholarly journals Prediction of adsorption efficiencies of Ni (II) in aqueous solutions with perlite via artificial neural networks

2017 ◽  
Vol 43 (4) ◽  
pp. 26-32 ◽  
Author(s):  
Sinan Mehmet Turp
Keyword(s):  
Neural Network ◽  
Experimental Data ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Back Propagation ◽  
Data Sets ◽  
Adsorption Efficiency ◽  
Back Propagation Algorithm ◽  
Artificial Neural

AbstractThis study investigates the estimated adsorption efficiency of artificial Nickel (II) ions with perlite in an aqueous solution using artificial neural networks, based on 140 experimental data sets. Prediction using artificial neural networks is performed by enhancing the adsorption efficiency with the use of Nickel (II) ions, with the initial concentrations ranging from 0.1 mg/L to 10 mg/L, the adsorbent dosage ranging from 0.1 mg to 2 mg, and the varying time of effect ranging from 5 to 30 mins. This study presents an artificial neural network that predicts the adsorption efficiency of Nickel (II) ions with perlite. The best algorithm is determined as a quasi-Newton back-propagation algorithm. The performance of the artificial neural network is determined by coefficient determination (R2), and its architecture is 3-12-1. The prediction shows that there is an outstanding relationship between the experimental data and the predicted values.

Surface Roughness Prediction of High Speed Milling Based on Back Propagation Artificial Neural Network

2011 ◽  
Vol 201-203 ◽  
pp. 696-699
Author(s):  
Jin Ping Hu ◽  
Yan Li ◽  
Jing Chong Zhang
Keyword(s):  
Neural Network ◽  
Surface Roughness ◽  
Artificial Neural Network ◽  
High Speed ◽  
Back Propagation ◽  
Quality Analysis ◽  
High Speed Milling ◽  
Surface Roughness Prediction ◽  
Roughness Prediction ◽  
Artificial Neural

Prediction of surface roughness is an important research for machining quality analysis. In order to predict surface roughness in machining, increasing productivity under ensuring milling, the artificial neural network is introduced into milling area. To build high-speed milling surface roughness prediction model using BP neural network. Prediction results are compared with experimental value, which shows that this method can achieve better prediction accuracy. It has certain significance for parameters selection of high-speed milling and quality control of the surface.

scholarly journals Optimal Artificial Neural Network Type Selection Method for Usage in Smart House Systems

Sensors ◽  
2020 ◽  
Vol 21 (1) ◽  
pp. 47
Author(s):  
Vasyl Teslyuk ◽  
Artem Kazarian ◽  
Natalia Kryvinska ◽  
Ivan Tsmots
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Input Data ◽  
Optimization Criterion ◽  
Fuzzy Input ◽  
Different Types ◽  
Smart House ◽  
Artificial Neural

In the process of the “smart” house systems work, there is a need to process fuzzy input data. The models based on the artificial neural networks are used to process fuzzy input data from the sensors. However, each artificial neural network has a certain advantage and, with a different accuracy, allows one to process different types of data and generate control signals. To solve this problem, a method of choosing the optimal type of artificial neural network has been proposed. It is based on solving an optimization problem, where the optimization criterion is an error of a certain type of artificial neural network determined to control the corresponding subsystem of a “smart” house. In the process of learning different types of artificial neural networks, the same historical input data are used. The research presents the dependencies between the types of neural networks, the number of inner layers of the artificial neural network, the number of neurons on each inner layer, the error of the settings parameters calculation of the relative expected results.

scholarly journals FEATURES OF DIAGNOSTIC ARTIFICIAL NEURAL NETWORKS FOR HYBRID EXPERT SYSTEMS

2019 ◽  
Vol 26 ◽  
pp. 36-46
Author(s):  
S. KONOVALOV ◽  
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Expert Systems ◽  
Technical System ◽  
Bulletin Board ◽  
Confidence Factor ◽  
Complex Technical System ◽  
Artificial Neural

In the proposed article, various methods of constructing an artificial neural network as one of the components of a hybrid expert system for diagnosis were investigated. A review of foreign literature in recent years was conducted, where hybrid expert systems were considered as an integral part of complex technical systems in the field of security. The advantages and disadvantages of artificial neural networks are listed, and the main problems in creating hybrid expert systems for diagnostics are indicated, proving the relevance of further development of artificial neural networks for hybrid expert systems. The approaches to the analysis of natural language sentences, which are used for the work of hybrid expert systems with artificial neural networks, are considered. A bulletin board is shown, its structure and principle of operation are described. The structure of the bulletin board is divided into levels and sublevels. At sublevels, a confidence factor is applied. The dependence of the values of the confidence factor on the fulfillment of a particular condition is shown. The links between the levels and sublevels of the bulletin board are also described. As an artificial neural network architecture, the «key-threshold» model is used, the rule of neuron operation is shown. In addition, an artificial neural network has the property of training, based on the application of the penalty property, which is able to calculate depending on the accident situation. The behavior of a complex technical system, as well as its faulty states, are modeled using a model that describes the structure and behavior of a given system. To optimize the data of a complex technical system, an evolutionary algorithm is used to minimize the objective function. Solutions to the optimization problem consist of Pareto solution vectors. Optimization and training tasks are solved by using the Hopfield network. In general, a hybrid expert system is described using semantic networks, which consist of vertices and edges. The reference model of a complex technical system is stored in the knowledge base and updated during the acquisition of new knowledge. In an emergency, or about its premise, with the help of neural networks, a search is made for the cause and the control action necessary to eliminate the accident. The considered approaches, interacting with each other, can improve the operation of diagnostic artificial neural networks in the case of emergency management, showing more accurate data in a short time. In addition, the use of such a network for analyzing the state of health, as well as forecasting based on diagnostic data using the example of a complex technical system, is presented.

scholarly journals An artificial neural network identifies glyphosate-impacted brackish communities based on 16S rRNA amplicon MiSeq read counts

2019 ◽  
Author(s):  
René Janßen ◽  
Jakob Zabel ◽  
Uwe von Lukas ◽  
Matthias Labrenz
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Environmental Monitoring ◽  
Microbial Communities ◽  
List Type ◽  
Neural Net ◽  
Next Generation ◽  
Artificial Neural

AbstractArtificial neural networks can be trained on complex data sets to detect, predict, or model specific aspects. Aim of this study was to train an artificial neural network to support environmental monitoring efforts in case of a contamination event by detecting induced changes towards the microbial communities. The neural net was trained on taxonomic cluster count tables obtained via next-generation amplicon sequencing of water column samples originating from a lab microcosm incubation experiment conducted over 140 days to determine the effects of the herbicide glyphosate on succession within brackish-water microbial communities. Glyphosate-treated assemblages were classified correctly; a subsetting approach identified the clusters primarily responsible for this, permitting the reduction of input features. This study demonstrates the potential of artificial neural networks to predict indicator species in cases of glyphosate contamination. The results could empower the development of environmental monitoring strategies with applications limited to neither glyphosate nor amplicon sequence data.Highlight bullet pointsAn artificial neural net was able to identify glyphosate-affected microbial community assemblages based on next generation sequencing dataDecision-relevant taxonomic clusters can be identified by a stochastically subsetting approachJust a fraction of present clusters is needed for classificationFiltering of input data improves classification

scholarly journals A single layer artificial neural network type architecture with molecular engineered bacteria for reversible and irreversible computing

2021 ◽  
Author(s):  
Kathakali Sarkar ◽  
Deepro Bonnerjee ◽  
Rajkamal Srivastava ◽  
Sangram Bagh
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Basic Concept ◽  
Single Layer ◽  
Artificial Neural ◽  
Engineered Bacteria ◽  
Network Type

Here, we adapted the basic concept of artificial neural networks (ANN) and experimentally demonstrate a broadly applicable single layer ANN type architecture with molecular engineered bacteria to perform complex irreversible...

scholarly journals Mitigating Faults and Revenue Losses Using Fault Detectors at Trans Amadi Industrial Layout, Port Harcourt Rivers State

2021 ◽  
Vol 9 (12) ◽  
pp. 883-890
Author(s):  
Nwoke G. O.
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Networks ◽  
Fault Detection ◽  
Transmission Line ◽  
Transmission Lines ◽  
Distribution Networks ◽  
Back Propagation Algorithm ◽  
Artificial Neural ◽  
Industrial Layout

Abstract: Transmission line fault detection is an important aspect of monitoring the health of a power plant since it indicates when suspected faults could lead to catastrophic equipment failure. This research looks at how to detect generator and transmission line failures early and investigates fault detection methods using Artificial Neural Network approaches. Monitoring generator voltages and currents, as well as transmission line performance metrics, is a key monitoring criterion in big power systems. Failures result in system downtime, equipment damage, and a high danger to the power system's integrity, as well as a negative impact on the network's operability and dependability. As a result, from a simulation standpoint, this study looks at fault detection on the Trans Amadi Industrial Layout lines. In the proposed approach, one end's three phase currents and voltages are used as inputs. For the examination of each of the three stages involved in the process, a feed forward neural network with a back propagation algorithm has been used for defect detection and classification. To validate the neural network selection, a detailed analysis with varied numbers of hidden layers was carried out. Between transmission lines and power customers, electrical breakdowns have always been a source of contention. This dissertation discusses the use of Artificial Neural Networks to detect defects in transmission lines. The ANN is used to model and anticipate the occurrence of transmission line faults, as well as classify them based on their transient characteristics. The results revealed that, with proper issue setup and training, the ANN can properly discover and classify defects. The method's adaptability is tested by simulating various defects with various parameters. The proposed method can be applied to the power system's transmission and distribution networks. The MATLAB environment is used for numerous simulations and signal analysis. The study's main contribution is the use of artificial neural networks to detect transmission line faults. Keywords: Faults and Revenue Losses

Forecasting Stock Returns with Artificial Neural Networks

2011 ◽  
pp. 47-79 ◽  
Author(s):  
Suraphan Thawornwong ◽  
David Enke
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Stock Returns ◽  
Future Research ◽  
Network Architectures ◽  
Network Applications ◽  
Artificial Neural ◽  
Neural Network Applications

During the last few years there has been growing literature on applications of artificial neural networks to business and financial domains. In fact, a great deal of attention has been placed in the area of stock return forecasting. This is due to the fact that once artificial neural network applications are successful, monetary rewards will be substantial. Many studies have reported promising results in successfully applying various types of artificial neural network architectures for predicting stock returns. This chapter reviews and discusses various neural network research methodologies used in 45 journal articles that attempted to forecast stock returns. Modeling techniques and suggestions from the literature are also compiled and addressed. The results show that artificial neural networks are an emerging and promising computational technology that will continue to be a challenging tool for future research.

Artificial Neural Network for Solving the Inventory Control Problem in Fuzzy Environments

2021 ◽  
pp. 126-143
Author(s):  
Mostafijur Rahaman ◽  
Sankar Prasad Mondal ◽  
Shariful Alam
Keyword(s):  
Neural Network ◽  
Differential Equation ◽  
Neural Networks ◽  
Artificial Neural Network ◽  
Artificial Neural Networks ◽  
Inventory Control ◽  
Solution Procedure ◽  
Control Problems ◽  
Fuzzy Environment ◽  
Artificial Neural

In this chapter, different inventory control problems are formulated in fuzzy environment and solved by artificial neural network. Due to present the non-linearity associated with the differential equation in fuzzy environment, the solution procedure may be very complicated. To avoid the situation, artificial neural networks play an important role. In this chapter, different inventory control problems are formulated in fuzzy environment and solved by artificial neural network. Due to present the non-linearity associated with the differential equation in fuzzy environment, the solution procedure may be very complicated. To avoid the situation, artificial neural networks play an important role.

Sign in / Sign up

Export Citation Format

Share Document