Surface Modification of Multi-Walled Carbon Nanotube Using Double-Chained Quartenary Ammonium Bromide

2016 ◽  
Vol 701 ◽  
pp. 18-22 ◽  
Author(s):  
Mohd Junaedy Osman ◽  
Wan Md Zin Wan Yunus ◽  
Keat Khim Ong ◽  
Noor Azilah Mohd Kasim ◽  
Siti Hasnawati Jamal ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Functional Group ◽  
Ammonium Bromide ◽  
New Materials ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Weight Losses ◽  
Multi Walled Carbon Nanotube

Modification of multi-walled carbon nanotube (MWCNT) plays an important role to produce MWCNT crossbreeds that may be useful for exploration of new materials. In this report, characterization of dimethyl dioctadecylammonium bromide (DDOAB) modified multi-walled carbon nanotube (Mo-MWCNT) using Fourier Transform Infrared (FTIR) spectroscopy and Thermogravimetric analysis (TGA) and X-ray diffraction (XRD) is described. FTIR shows the presence of both aliphatic (CH stretching and CH bending) and ammonium (CN stretching) groups from DDOAB and the existence of C=C aromatic functional group from the structure of MWCNT in Mo-MWCNT spectra. This result was supported by TGA result which suggests that there are weight losses due to the degradation of DDOAB (between 250 °C to 500 °C) in the product. In addition, XRD pattern remain after modification suggesting attachment of MWCNT and DDOAB occurs at the surface of MWCNT.

Preparation & Characterization of Four Kinds of TiO2/CNTs

2013 ◽  
Vol 807-809 ◽  
pp. 490-495
Author(s):  
Jia Liang Li ◽  
Feng Li
Keyword(s):  
Carbon Nanotube ◽  
Sol Gel ◽  
Crystalline Form ◽  
Raw Material ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Morphology And Structure ◽  
Scanning Electron

With Ti (C4H9O)4 as raw material, and with untreated CNT, carboxylated CNT, hydroxylated CNT and carbon fiber as carriers respectively, four kinds of TiO2-CNT composites were successful prepared orderly under the calcinated conditions of 400 to 800 °C by sol-gel method. The morphology and structure features of these composites were characterized by scanning calorimeter (DSC), X-ray diffraction (XRD) and scanning electron microscope (SEM) respectively. The results indicate that, as coexisting carrier material, the carbon nanotube had obvious effects on the morphology and structure of TiO2 nanocrystal. However, when being carboxylated or hydroxylated, though multi-walled carbon nanotube has still obvious effects on crystalline form of TiO2,threre are no remarkable impacts on its morphology.

High Resolution Replication of Organoclay Surfaces

1982 ◽  
Vol 40 ◽  
pp. 576-577
Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys
Keyword(s):  
Clay Mineral ◽  
Organic Molecule ◽  
Organic Molecules ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Naturally Occurring ◽  
Silicate Layers ◽  
Mineral Identification

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.

scholarly journals Photoluminescent Properties of Hydroxyapatite and Hydroxyapatite/Multi-Walled Carbon Nanotube Composites

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 832
Author(s):  
Edna X. Figueroa-Rosales ◽  
Javier Martínez-Juárez ◽  
Esmeralda García-Díaz ◽  
Daniel Hernández-Cruz ◽  
Sergio A. Sabinas-Hernández ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Hexagonal Phase ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Multi Walled Carbon Nanotube ◽  
Nanotube Composites ◽  
Carbon Nanotube Composites ◽  
Co Precipitation ◽  
Functionalized Mwcnts

Hydroxyapatite (HAp) and hydroxyapatite/multi-walled carbon nanotube (MWCNT) composites were obtained by the co-precipitation method, followed by ultrasound-assisted and microwave radiation and thermal treatment at 250 °C. X-ray diffraction (XRD) confirmed the presence of a hexagonal phase in all the samples, while Fourier-transform infrared (FTIR) spectroscopy elucidated the interaction between HAp and MWCNTs. The photoluminescent technique revealed that HAp and the composite with non-functionalized MWCNTs present a blue luminescence, while the composite with functionalized MWCNTs, under UV-vis radiation shows an intense white emission. These findings allowed presentation of a proposal for the use of HAp and HAp with functionalized MWCNTs as potential materials for optoelectronic and medical applications.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

The Preparation and Characterization of Polybenzoxazole Copolymerized with Multiwalled Carbon Nanotube via Direct Friedel-Crafts Acylation

2014 ◽  
Vol 989-994 ◽  
pp. 560-563
Author(s):  
Yong Chen ◽  
Jun Qian ◽  
Qi Xin Zhuang ◽  
Zhe Wen Han
Keyword(s):  
Carbon Nanotube ◽  
Polyphosphoric Acid ◽  
Multiwalled Carbon Nanotube ◽  
X Ray Diffraction ◽  
Acylation Reaction ◽  
Multiwalled Carbon ◽  
Sem Images ◽  
X Ray ◽  
Electronic Microscope

Multiwalled carbon nanotube (MWCNT) was subjected a copolymerization reaction with 4, 6-diaminoresorcinol salt (DAR•2HCl) and terephthalic acid (TA) in polyphosphoric acid (PPA) by Friedel-Crafts acylation reaction without any acid treatment or modification. The structure and morphology of the as-prepared poly (p-phenylene benzobisoxazole) (PBO)/MWCNT nanocomposites were characterized by X-ray diffraction (XRD) and scanning electronic microscope (SEM). The SEM images indicated that MWCNTs can disperse in PBO matrix uniformly without agglomeration and MWCNTs have been introduced into PBO matrix by covalent bonding via Friedel-Crafts acylation between MWCNTs and TA.

Mechanochemical Synthesis of Magnesium Doped Hydroxyapatite: Powder Characterization

2013 ◽  
Vol 372 ◽  
pp. 62-65 ◽  
Author(s):  
Sharifah Adzila ◽  
Singh Ramesh ◽  
Iis Sopyan ◽  
C.Y. Tan ◽  
Mohd. Hamdi ◽  
...  
Keyword(s):  
Fourier Transform ◽  
Present Method ◽  
X Ray Diffraction ◽  
Mechanochemical Method ◽  
Xrd Pattern ◽  
X Ray ◽  
Hydroxyapatite Powder ◽  
Powder Properties ◽  
Mg Doped

In this study, the mechanochemical method was employed to synthesize hydroxyapatite (HA) and magnesium (Mg) doped hydroxyapatite (HA) powders. The effect of Mg2+ into the synthesized HA powder properties were investigated. Characterization of the synthesized HA and Mg doped HA at various concentrations (1% - 5% MgHA) were accomplished through X-ray diffraction (XRD) and Fourier transform infrared (FTIR) analyses. nanosize of HA and Mg doped HA powders were successfully synthesized through the present method as indicated from the different peaks intensity and adsorption bands obtained in XRD pattern and FTIR respectively.

Preparation and Characterization of Clays from Different Areas in Ban Bo Suak, Nan Province, Thailand

2015 ◽  
Vol 659 ◽  
pp. 127-131
Author(s):  
Usanee Malee ◽  
Sakdiphon Thiansem
Keyword(s):  
Clay Sample ◽  
X Ray Diffraction ◽  
Scientific Process ◽  
Quartz Content ◽  
Xrd Pattern ◽  
X Ray ◽  
Kiln Site ◽  
Before And After ◽  
Tone Color

The scientific process was used to explain characterization and physical properties of the clay sample close to the ancient Nan kiln site. These samples were obtained from JQA, FQB, PQC and NQD. X-ray diffraction (XRD) and X-ray fluorescence (XRF) technique were used to determine the chemical composition and phase transformation before and after fired at 800-1250 °C. XRF result was confirmed that all clay samples mainly contained SiO2(>80 wt. %) XRD pattern indicated that quartz was the majority of phase in the all of them. High amount of Fe2O3(>1.6 wt. %) was related to the red-brown tone color. The clay sample could be fired up to 1280 °C without wrapping behavior; it was found that FQB clay had the highest firing resistance due to the maximum quartz content.

Structures and Physical Properties of Multi-Walled Carbon Nanotube-Filled PVDF Thermoplastic Composites

2007 ◽  
Vol 124-126 ◽  
pp. 1117-1120 ◽  
Author(s):  
Dong Wook Chae ◽  
Young Wan Nam ◽  
Seung Sangh Wang ◽  
S.M. Hong
Keyword(s):  
Carbon Nanotube ◽  
Vinylidene Fluoride ◽  
Thermoplastic Composites ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
X Ray ◽  
Loading Level ◽  
Multi Walled Carbon Nanotube ◽  
Poly Vinylidene Fluoride ◽  
Internal Mixer

Poly(vinylidene fluoride) (PVDF) / multi-walled carbon nanotube (MWNT) thermoplastic composites was melt compounded in an internal mixer. The percolation level for this system in electrical conductivity clearly occured between 2 and 2.5 wt%. PVDF/MWNT thermoplastic composites exhibited an increased crystallization temperature with the loading level, at 10 wt% loading by ca. 6. In addition, they presented a shoulder posterior to the main melting peak and an increased endpoint of the peak. In the Wide Angle X-ray Diffraction (WAXD) patterns, the incorporation of MWNT produced a larger shoulder at 2θ =20.7° with increasing the loading level, corresponding to the β-form crystal of PVDF.

Physical and Chemical Properties of Mineral in Soils of Cassava Cropping Area: A Case Study in Chonburi Province

2014 ◽  
Vol 979 ◽  
pp. 440-443
Author(s):  
W. Siriprom ◽  
K. Teanchai ◽  
S. Kongsriprapan ◽  
J. Kaewkhao ◽  
N. Sangwaranatee
Keyword(s):  
Thermo Gravimetric Analysis ◽  
Chemical Properties ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Physical And Chemical ◽  
And Chemical Properties

The chemical and physical properties of topsoil and subsoil which collected from the cassava cropping area in Chonburi Province have been investigated. The characterization of both soil sample were used X-Ray Diffraction (XRD), Energy Dispersive X-Ray Fluorescence (EDXRF) while FTIR used to confirmed the formation of intermolecular bonding and Thermo-Gravimetric Analysis (TGA) used for investigated the crystalline. It was found that, the XRD pattern indicated quartz phase. The chemical composition by XRF reported that the soils samples consist of Si, Al, Ca, Fe, K, Mn, Ti, Cr, Zn, Ag and Cu. and TGA results, noticed that the removal of moisture and organics material.

Synthesis and Characterization of Superparamagnetic NiFe2O4 Nanoparticles

2010 ◽  
Vol 663-665 ◽  
pp. 1325-1328 ◽  
Author(s):  
De Hui Sun ◽  
De Xin Sun ◽  
Yu Hao
Keyword(s):  
Room Temperature ◽  
Size Range ◽  
X Ray Diffraction ◽  
Inverse Spinel ◽  
Cubic Crystal ◽  
Xrd Pattern ◽  
X Ray ◽  
Nife2o4 Nanoparticles ◽  
Average Size

The superparamagnetic NiFe2O4 nanoparticles were synthesized using a hydrothermal technology through P123 sphere micelles as ‘nanoreactor’ in this work. Their morphologies, structures, surface properties and magnetism were characterized by FE-SEM, XRD, FTIR, and VSM, respectively. The nickel ferrite samples are nearly spherical and homogeneous nanoparticles with average size range of about 50-120 nm. They possess superparamagnetism at room temperature and higher saturation magnetization. X-ray diffraction (XRD) pattern confirms that the samples belong to the cubic crystal system with an inverse-spinel structure. Fourier transform infrared (FTIR) absorption spectrum indicates that the NiFe2O4 nanoparticles are stabilized by the P123 adsorbed on the surface of nanoparticles.

Sign in / Sign up

Export Citation Format

Share Document