Study on the Synthesis of Waterborne UV Curable Polyurethane Acrylate

2016 ◽  
Vol 703 ◽  
pp. 256-260 ◽  
Author(s):  
Zhen Wen Liu ◽  
Jian Yun He ◽  
Wei Jia Kang ◽  
Xi Dan Luo ◽  
Yu Mei Ding ◽  
...  
Keyword(s):  
Acrylic Acid ◽  
Influencing Factors ◽  
Water Solubility ◽  
Uv Curing ◽  
Polypropylene Glycol ◽  
Waterborne Coating ◽  
Uv Curable ◽  
Polyurethane Acrylate ◽  
Hydrophilic Group

Water-brone UV-curable polyurethane acrylate was synthesized based on the toluene diisocynate, polypropylene glycol, dihydroxy methyl acrylic acid and hydroxyethyl acrylate. The structure and the influencing factors on the water solubility and photosensitivity of the waterbrone UV-curable polyurethane acrylate were analyzed. Results show that the water solubility of the resin is enhanced with the increasing of the content of hydrophilic group in the resin. The UV-curing rate of the waterborne coating is good by adding the 819-DW photoinitiator. Triethylamine is a good neutralizer in the waterbrone UV-curable system for having 90% neutralization degree.

Research on the Modification of Waterborne UV-Curable Polyurethane Acrylate

2013 ◽  
Vol 864-867 ◽  
pp. 698-701
Author(s):  
Jian Yun He ◽  
Yong Liu ◽  
Li Chen He ◽  
Qiang Wang
Keyword(s):  
Uv Curing ◽  
Acrylic Resin ◽  
Ethyl Acrylate ◽  
Toluene Diisocyanate ◽  
Polypropylene Glycol ◽  
Hyperbranched Polyester ◽  
Uv Curable ◽  
Polyurethane Acrylate ◽  
Overall Performance ◽  
Influent Factors

In this study, waterborne UV-curable polyurethane acrylic resin was synthesized using polypropylene glycol, toluene diisocyanate, dimethylol propionic acid and hydroxyl ethyl acrylate, and modified by hyperbranched polyester acrylate. The influent factors on hydrophilic properties and UV curing speed of the resin were discussed, and the modified resin has compared with that of unmodified resin. Results showed that the overall performance and UV curing speed of the resin modified by hyperbranched polyester was greatly enhanced, the hydrophilic property of the resin was proportional to hydrophilic group content.

Synthesis and Curing Kinetics of UV-Curable Waterborne Bisphenol-S Epoxy Acrylate/Polyurethane-Acrylate Coating

2012 ◽  
Vol 549 ◽  
pp. 457-461
Author(s):  
Jun Gang Gao ◽  
Feng Li Zhu ◽  
Jiang Bo Yang ◽  
Xiao Qian Liu
Keyword(s):  
Uv Curing ◽  
Curing Kinetics ◽  
Mechanical Analysis ◽  
Curing Temperature ◽  
Coating Film ◽  
Epoxy Acrylate ◽  
Bisphenol S ◽  
Uv Curable ◽  
Polyurethane Acrylate ◽  
Kinetics Of

In ouder to prepare the waterborne UV-curable polyurethane acrylate coatings, the anionic polyurethane acrylate emulsifier and bisphenol-S eopxy acrylate were synthesized. The curing process, kinetics and properties of waterborone UV-curable epoxy acrylate/polyurethanes acrylate coating were investigated by FTIR, DSC and DMA. The results show that the static initial curing temperature Ti is 52.36 oC, peak temperature Tp is 71.58 oC, the finished temperature Tf is 89.15 oC. The curing reaction can be described by two-parameter autocatalytic Šesták-Berggren (S-B) model.This coating has a better UV-curing property. The dynamic mechanical analysis showed that the glass transition temperature Tg of coating film is 52.70 oC.

Preparation and properties of phase-change heat-storage UV curable polyurethane acrylate coating

2014 ◽  
Vol 132 (2) ◽  
Author(s):  
Yeting Shi ◽  
Yijian Wu ◽  
Lizhi Zhu ◽  
Baoqing Shentu ◽  
Zhixue Weng
Keyword(s):  
Phase Change ◽  
Heat Storage ◽  
Uv Curable ◽  
Polyurethane Acrylate

UV-Curable organic-inorganic hybrid films based on tetraethylorthosilicate oligomer and special acrylated polyester

e-Polymers ◽  
2012 ◽  
Vol 12 (1) ◽  
Author(s):  
Jianyun He ◽  
Jinping Xiong ◽  
Bingqian Xia
Keyword(s):  
Uv Light ◽  
Uv Curing ◽  
Organic Matrix ◽  
Dynamic Mechanical Properties ◽  
Hybrid Films ◽  
Uv Curable ◽  
Inorganic Hybrid ◽  
Dynamic Mechanical ◽  
H Nmr ◽  
Uv Curing Process

AbstractOrganic-inorganic hybrid films were prepared using tetraethylorthosilicate (TEOS) oligomer and special acrylated polyester (SAP) via a UV-curing process. TEOS oligomers were prepared in the presence of water and ethanol using hydrochloric acid as the catalyst and characterized using 1H NMR, 29Si NMR and MALDI-TOF mass spectra. Special acrylated polyester was synthesized by 1,4-cyclohexane dimethanol, neopentyl glycol, 1,4-butanediol, maleic anhydride, adipic acid, and acrylic acid. Hybrid films were cured by UV light and the thermal properties, dynamic mechanical properties, and tensile properties of the hybrid films were evaluated as the function of TEOS oligomer content. The morphology of the hybrid films was examined using atomic force microscopy (AFM). The microscopy and dynamic mechanical data indicated that the hybrid films were heterogeneous materials with various inorganic particle sizes dispersed within the organic matrix. The results indicated that after incorporating the TEOS oligomer, the strength and thermal stability of the hybrid films were enhanced.

scholarly journals A novel polyfunctional polyurethane acrylate prepolymer derived from bio-based polyols for UV-curable coatings applications

2022 ◽  
Vol 106 ◽  
pp. 107439
Author(s):  
Jinqing Huang ◽  
Yahong Xiong ◽  
Xiaohua Zhou ◽  
Zhuohong Yang ◽  
Teng Yuan
Keyword(s):  
Uv Curable ◽  
Polyurethane Acrylate

scholarly journals Improving UV Curing in Lignin-Containing Photopolymers for Stereolithography by Chemical Reduction and Acetylation

2019 ◽  
Author(s):  
Jordan T. Sutton ◽  
Kalavathy Rajan ◽  
David P. Harper ◽  
Stephen Chmely
Keyword(s):  
Thermal Stability ◽  
Chemical Modification ◽  
Chemical Reduction ◽  
Uv Curing ◽  
Uv Absorption ◽  
Uv Curable ◽  
Reduction Reactions ◽  
Commercial Use ◽  
Resin Formulation ◽  
Modified Lignin

Despite recent successes incorporating lignin into photoactive resins, lignin photo-properties can be detrimental to its application in UV-curable photopolymers, especially to customized, engineered resins for use in stereolithography printing. We report on chemical modification techniques employed to reduce UV absorption in lignin and the resulting mechanical, thermal, and cure properties in these lignin-containing materials. Pine lignin was modified using acetylation and reduction reactions and incorporated into a printable resin formulation. Modified lignin displayed enhanced printing properties because UV absorption at the 3D printable range was reduced in all acylated lignin from 25% up to greater than 60%. Resins made with the modified lignin showed increased stiffness and strength with lower thermal stability. Investigating these techniques is an important step in developing lignin for use in UV-curing applications and furthers the effort to valorize lignin toward commercial use.

scholarly journals UV-Curing of Novel Tri-functional Melamine-phosphate Oligomer: An Effect of Coating With Polyurethane Acrylate Towards Mechanical, Thermal And Flame Retardant Properties

2021 ◽  
Author(s):  
Pundalik Mali ◽  
Narendra Sonawane ◽  
Nilesh Pawar ◽  
Vikas Patil
Keyword(s):  
Flame Retardant ◽  
Thermo Gravimetric Analysis ◽  
Galvanized Steel ◽  
Gravimetric Analysis ◽  
Pencil Hardness ◽  
Uv Curable ◽  
Polyurethane Coatings ◽  
Melamine Phosphate ◽  
Polyurethane Acrylate ◽  
Flame Retardant Properties

Abstract A novel melamine-phosphate trifunctional acrylate MPTO) was successfully synthesized via simple cyclization of hexamethylolmelamine (HMM) with phosphorous oxychloride (POCl3) followed by addition reaction of hydroxyethylmethacrylate (HEMA). The molecular structure of MPTO was identified by FTIR and 1H-NMR, 13C-NMR, and GC-MS spectra. The synthesized MPTO oligomer was impregnated with polyurethane acrylate to make the various formulation of UV-cured coatings. The polyurethanes-MPTO oligomers were coated on wood and galvanized steel panels. The properties of UV-cured PU-MPTO were studied by differential scanning calorimeter (DSC), while their crystallinity by X-ray diffraction analysis (XRD). The thermo-gravimetric analysis (TGA) exhibited a high char yield of 18.4% at 800 °C. Moreover, coating films show prominent flame retardancy with UL-94 V-0 rating and maximum limiting index value (LOI) values of 34.8%, which are much higher than the common polyurethane coatings. The polyurethane coatings cured with MPTO exhibited excellent mechanical properties were estimated various tests such as adhesion, pencil hardness, solvent resistance, flexibility, and corrosion test. The coating performance revealed that MPTO improves the mechanical, thermal, and flame retardant properties because their unique structure contains melamine-phosphate moiety and long aliphatic chains of an acrylate ester. These high-performance melamine-based UV-curable coatings are promising for extensive applications.

Formation of Barrier Ribs via Micro Molding Process Using UV-Curable Paste

2007 ◽  
Vol 534-536 ◽  
pp. 1029-1032
Author(s):  
Yong Seog Kim ◽  
Tae Gum Koh ◽  
Yoo Seong Kim
Keyword(s):  
Uv Curing ◽  
Processing Route ◽  
Curing Process ◽  
Plasma Display Panel ◽  
Molding Process ◽  
Uv Curable ◽  
Processing Cost ◽  
Plasma Display ◽  
Uv Curing Process ◽  
Sintering Shrinkage

In an attempt to reduce processing cost and to improve the resolution of PDPs, a micro mold transfer processing route for barrier ribs of plasma display panel was attempted. In this study, the parameters that may cause defects during the process were identified, which include the shrinkage during the UV curing process, stress due to the evaporation of organic components, and sintering shrinkage. Considering such parameters, a UV curable paste was developed and the barrier ribs of PDPs were successfully processed via the process. This work demonstrated the possibility of a build-up route in manufacturing barrier ribs of PDP

UV curable polyester‐based polyurethane acrylate nanocoating

2010 ◽  
Vol 39 (5) ◽  
pp. 268-276 ◽  
Author(s):  
R.A. Mhatre ◽  
P.A. Mahanwar ◽  
V.V. Shertukde ◽  
V.A. Bambole
Keyword(s):  
Uv Curable ◽  
Polyurethane Acrylate
Sign in / Sign up

Export Citation Format

Share Document