Influence of Tempering Temperatures on Magnetoelastic Relaxation Behavior of 30KH13 Steel

2018 ◽  
Vol 769 ◽  
pp. 60-65 ◽  
Author(s):  
Kamil Muratov ◽  
Vitaly Novikov ◽  
Roman Sokolov ◽  
Vladimir Probotyuk
Keyword(s):  
Remanent Magnetization ◽  
Relaxation Behavior ◽  
Mechanical Loads ◽  
Load Amplitude ◽  
Power Approximation ◽  
Approximation Coefficients

Magnetoelastic tests of 30KH13 (30X13) steel were carried out under cyclic loadings. The article focuses on the property of magnetoelastic power relaxation of remanent magnetization. With the load amplitude increasing, complexes of power approximation coefficients reflect typical mechanical loads at various tempering temperatures.

Grain separation enhanced magnetic coercivity in Pt/Co multilayers.

1993 ◽  
Vol 51 ◽  
pp. 1038-1039 ◽  
Author(s):  
G.A. Bertero ◽  
R. Sinclair
Keyword(s):  
Remanent Magnetization ◽  
Strong Influence ◽  
Uniaxial Anisotropy ◽  
Magnetic Coupling ◽  
Recording Media ◽  
Magnetic Media ◽  
Signal To Noise ◽  
Out Of Plane ◽  
Longitudinal Recording ◽  
The Relationship

Pt/Co multilayers displaying perpendicular (out-of-plane) magnetic anisotropy and 100% perpendicular remanent magnetization are strong candidates as magnetic media for the next generation of magneto-optic recording devices. The magnetic coercivity, Hc, and uniaxial anisotropy energy, Ku, are two important materials parameters, among others, in the quest to achieving higher recording densities with acceptable signal to noise ratios (SNR). The relationship between Ku and Hc in these films is not a simple one since features such as grain boundaries, for example, can have a strong influence on Hc but affect Ku only in a secondary manner. In this regard grain boundary separation provides a way to minimize the grain-to-grain magnetic coupling which is known to result in larger coercivities and improved SNR as has been discussed extensively in the literature for conventional longitudinal recording media.We present here results from the deposition of two Pt/Co/Tb multilayers (A and B) which show significant differences in their coercive fields.

Propagation of Lightning Current Studied by Remanent Magnetization

2013 ◽  
Vol 133 (9) ◽  
pp. 694-699 ◽  
Author(s):  
Hideo Sakai ◽  
Kaname Yonezawa ◽  
Yoshihiro Kouno ◽  
Takatoshi Shindo
Keyword(s):  
Remanent Magnetization ◽  
Lightning Current

Analysis and design of thermo-mechanical interfaces

2012 ◽  
Vol 60 (2) ◽  
pp. 205-213
Author(s):  
K. Dems ◽  
Z. Mróz
Keyword(s):  
Optimality Conditions ◽  
Mechanical Loading ◽  
Material Properties ◽  
Structural Response ◽  
External Boundary ◽  
Mechanical Loads ◽  
Internal Interface ◽  
Analysis And Design ◽  
First Order ◽  
Mechanical Nature

Abstract. An elastic structure subjected to thermal and mechanical loading with prescribed external boundary and varying internal interface is considered. The different thermal and mechanical nature of this interface is discussed, since the interface form and its properties affect strongly the structural response. The first-order sensitivities of an arbitrary thermal and mechanical behavioral functional with respect to shape and material properties of the interface are derived using the direct or adjoint approaches. Next the relevant optimality conditions are formulated. Some examples illustrate the applicability of proposed approach to control the structural response due to applied thermal and mechanical loads.

Physical methods of research and monitoring

2019 ◽  
Vol 85 (1(I)) ◽  
pp. 35-44
Author(s):  
S. G. Sandomirski
Keyword(s):  
Heat Treatment ◽  
Coercive Force ◽  
Remanent Magnetization ◽  
Structural Changes ◽  
Mechanical Load ◽  
Magnetic Hysteresis ◽  
Steel Structures ◽  
Magnetic Characteristics ◽  
Magnetic Parameters ◽  
Saturation Intensity

The main magnetic parameters sensitive to the structure of steels are the parameters of their saturation loop of magnetic hysteresis: the coercive force Hcs and remanent magnetization Mrs. The saturation magnetization or saturation intensity Mr is most sensitive to the phase composition of steels. The variety of steel grades and modes of technological treatment (e.g., heat treatment, mechanical load) determined the use of magnetic structurescopy and magnetic characteristics — the coercive force Hc, remanent magnetization Mr , and specific hysteresis losses Wh on the subloops of the magnetic hysteresis of steels — as control parameters in diagnostics of the stressed and structural states of steel structures and pipelines. It has been shown that changes in Hc, Mr , and Wh are more sensitive to structural stresses and structures of steels than the parameters of the saturation hysteresis loop of magnetic hysteresis (Hcs, Mrs, and Mrs). The formulas for calculating Hc, Mr and Wh are presented to be used for estimation of changes in the parameters upon heat treatment of steels. Features of the structural sensitivity of the subloop characteristics and expediency of their use for magnetic structural and phase analyzes are determined. Thus, the range of changes in Ìr attributed to the structural changes in steels upon gradual Hm decrease is many times wider compared to the range of possible changes in Mrs under the same conditions. Conditions (relations between the magnetic parameters) and recommendations regarding the choice of the field strength Hm are given which provide the justified use of Hc, Mr and Wh parameters in magnetic structurescopy

Conductivity, Dielectric and Modulus study of NH4PF6 based Zwitterionic polymer electrolyte

2020 ◽  
Vol 13 ◽  
Author(s):  
Manindra Kumar ◽  
Neelabh Srivastava
Keyword(s):  
Polymer Electrolyte ◽  
Power Law ◽  
Loss Tangent ◽  
Electric Modulus ◽  
Relaxation Behavior ◽  
Conductivity Data ◽  
Frequency Range ◽  
Zwitterionic Polymer ◽  
Power Law Equation ◽  
Jonscher’S Power Law

Background and Objective: Zwitterionic polymer electrolyte has been successfully synthesized using NH4PF6 salt. The conductivity of the synthesized polymer membrane is found to be of the order of 10-3Scm-1. Dielectric and Modulus properties of the polymer electrolyte have also been studied which showed well relaxation peaks with both temperature and salt concentrations. Result: This is well depicted with the loss tangent curve. Debye type relaxation behavior has observed from the electric modulus. Conclusion: Frequency dependent conductivity data (fitted with Jonscher's power law equation) confirmed the presence of NCL/SLPL type behavior in the studied frequency range.

scholarly journals Microstructural Analysis of Fractured Orthopedic Implants

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2209
Author(s):  
Mateusz Kopec ◽  
Adam Brodecki ◽  
Grzegorz Szczęsny ◽  
Zbigniew L. Kowalewski
Keyword(s):  
Physical Activity ◽  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fracture Behavior ◽  
Locking Plate ◽  
Microstructural Analysis ◽  
Pure Titanium ◽  
Orthopedic Implants ◽  
Mechanical Loads ◽  
Scanning Electron

In this paper, fracture behavior of four types of implants with different geometries (pure titanium locking plate, pure titanium femoral implant, Ti-6Al-4V titanium alloy pelvic implant, X2CrNiMo18 14-3 steel femoral implant) was studied in detail. Each implant fractured in the human body. The scanning electron microscopy (SEM) was used to determine the potential cause of implants fracture. It was found that the implants fracture mainly occurred in consequence of mechanical overloads resulting from repetitive, prohibited excessive limb loads or singular, un-intendent, secondary injures. Among many possible loading types, the implants were subjected to an excessive fatigue loads with additional interactions caused by screws that were mounted in their threaded holes. The results of this work enable to conclude that the design of orthopedic implants is not fully sufficient to transduce mechanical loads acting over them due to an increasing weight of treated patients and much higher their physical activity.

Sign in / Sign up

Export Citation Format

Share Document