Compaction Properties of Rice Husk Ash-Lime-Bangkok Clay Mixtures

2019 ◽  
Vol 803 ◽  
pp. 331-337 ◽  
Author(s):  
Hengchhorn Phai ◽  
Amin Eisazadeh

Bangkok clay (BC) is notorious for its poor engineering properties in Thailand and world-widely. In terms of workability, it is significant to modify its naturally weak properties. Nowadays, humans are overusing Earth’s resources and generating so much waste. In consequence, eco-friendly and cost cutting improvements are appreciated in geotechnical field. At the same time, Rice Husk Ash (RHA) is a cheap potential material for soil improvement. Lime is also known as a common material used in soil stabilization both solely and mixed with other materials. An inevitable step to every soil stabilization is to perform compaction tests that gives basic notions to treat soil. In this experimental study, compaction tests were proceeded with soil mixed with 0%, 10%, 20%, 30%, 50% of Rice Husk Ash (RHA) by dry soil mass in replacement manner and added 0%, 4%, 8%, 12% of lime. Overall, the more RHA and lime amount is mixed with soil, the higher Optimum Moisture Content (OMC) gets. This means that when replacement/stabilizers are added more and more, the soil needs more water to reach its Maximum Dry Density (MDD). Unlike OMC, MDD reduces when quantity of additives is increased.

2019 ◽  
Vol 258 ◽  
pp. 01014
Author(s):  
Noorfaizah Hamzah ◽  
Nur ‘Ain Mat Yusof ◽  
Muhammad Ihsan Haziq Mohd Rahimi

Construction activities on peat soils are found to be extremely difficult as the soil is profound as soft soil and has low shear strength and high moisture content. Due to alternating swelling and shrinkage nature, it causes serious damage to the structure above it. This happens due to repetition of drying and wetting of soil. Stabilization of soil is commonly applied to improve the mechanical properties of soil prior to soil engineering works. This soil improvement method is advantageous and effective one by using waste materials. Waste in our country is divided in various types and it includes domestic wastes, industrial wasters, agricultural wastes etc. Because of difficulties to diminish these wastes without affect to environment and surroundings, it can be used as a stabilizing agent in the soil. Therefore, this experimental study carried out to evaluate the effect of Rice Husk Ash (RHA) and sawdust on engineering properties of the peat soil. The properties such as compaction and unconfined compressive strength are determined separately with sawdust and added of RHA in peat soil at a variety of percentages (2.5%, 5% etc.) in addition small amount of constant rate of lime with 2% of the dry soil weight. By obtaining the results, it can deduce a promising and improving result in stabilizing the soil with sawdust and Rice Husk Ash in both economic and strength capacity. This will not only solve the waste disposal problem but also enhance the strength characteristics of soil significantly.


2021 ◽  
Vol 6 (2) ◽  
pp. 044-050
Author(s):  
Tsion Mindaye ◽  
Emer Tucay Quezon ◽  
Temesgen Ayna

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.


The focus of this report is to study the feasibility of stabilizing the soil by using rice husk ash and coconut coir fibre, thus re-using the waste materials and providing an economical and eco-friendly method of soil stabilization. Soil stabilisation is a system to treat the soil to improve the performance of the soil. The capacity, rice husk ash as stabilizing additive to expansive soil is evaluated for the enhancing engineering properties of expansive soil. The Assessment includes the dedication of the swelling capacity, plastic limit, liquid limit, plasticity index, cohesion & compaction characteristics of the expansive soil. For the soil which lacks enough stability, various stabilization techniques can be adopted. Various percentage of rice husk ash and coconut coir Fibre (5% to 25%). the practices were executed on 5 proportions 5% ,10%,15%, 20% and 25% with the sample. The optimum value of the assessment is found at the proportion of 15% in table 3i.e.the value of unconfined compressive strength is 142kN/m2. Expansive clays are very problematic soils and not suitable for construction. Because of the change in volume when it exposes to water. Usually in rainy season, they absorb water and swells and in summer it shrinks.


2021 ◽  
Author(s):  
Emer Tucay Quezon ◽  
Tsion Mindaye

Expansive soil swells when it is wet, and it will shrink when it dries. Due to this behavior of the soil, the strength and other properties of soil are inferior. To improve its properties, it is necessary to stabilize the soil with different stabilizers. Soil stabilization is a process to treat the soil to maintain, alter, or improve expansive soil performance. In this study, the potential of 'Fino' as stabilizing additive to expansive soil was investigated for the improving engineering properties of expansive soil to be used as subgrade material. The evaluation involved the determination of the Free Swell test, CBR test, Atterberg's limits, and the Proctor test of expansive soil in its natural state as well as when mixed with varying proportions of 'Fino.' The practices were performed on six proportions 5%, 10%, 15%, 20%, 25% and 30 % with expansive soil. The research result indicated a considerable reduction in Swelling, and the Maximum dry Density of soil was improved. Optimum moisture content decreased in increasing 'Fino.' At 30% of 'Fino,' the CBR values of expansive soil increased from 1.06% to 5.94%, Liquid Limit decreased from 95.2% to 29.4%, plasticity index decreased from 57.24% to 17.82% and the degree of expansion of the natural subgrade soil has reduced from "very high to medium." Hence, it is concluded that the 'Fino' at 30% has shown significant improvement in the expansive soil's engineering properties meeting the ERA and AASHTO Standard specifications requirements for road subgrade material.


2021 ◽  
Vol 11 (16) ◽  
pp. 7503
Author(s):  
Woubishet Zewdu Taffese ◽  
Kassahun Admassu Abegaz

Soil stabilization is the alteration of physicomechanical properties of soils to meet specific engineering requirements of problematic soils. Laboratory examination of soils is well recognized as appropriate for examining the engineering properties of stabilized soils; however, they are labor-intensive, time-consuming, and expensive. In this work, four artificial intelligence based models (OMC-EM, MDD-EM, UCS-EM+, and UCS-EM−) to predict the optimum moisture content (OMC), maximum dry density (MDD), and unconfined compressive strength (UCS) are developed. Experimental data covering a wide range of stabilized soils were collected from previously published works. The OMC-EM, MDD-EM, and UCS-EM− models employed seven features that describe the proportion and types of stabilized soils, Atterberg limits, and classification groups of soils. The UCS-EM+ model, besides the seven features, employs two more features describing the compaction properties (OMC and MDD). An optimizable ensemble method is used to fit the data. The model evaluation confirms that the developed three models (OMC-EM, MDD-EM, and UCS-EM+) perform reasonably well. The weak performance of UCS-EM− model validates that the features OMC and MDD have substantial significance in predicting the UCS. The performance comparison of all the developed ensemble models with the artificial neural network ones confirmed the prediction superiority of the ensemble models.


2020 ◽  
Vol 53 (2C) ◽  
pp. 1-12
Author(s):  
Duong Nguyen

Rice husk ash (RHA) is an agricultural residue and has shown great potential for soil stabilization. However, the research on the utilization of RHA for soft soil improvement using cement deep mixing method is still limited and the efficiency of using different RHA types for soil improvement needs to be clarified. In this study, the effect of different RHA types on Atterberg limits, unconfined compressive strength (UCS), and elastic modulus (E50) of soil-cement mixtures will be investigated. Two types of RHA which obtained from open fire burning (RHA1) and burning in a furnace under controlled conditions of temperature and duration of burning (RHA2), were used for this study. The RHA contents from 0 to 15% and 10% cement of the dry weight of the soil were used to treat the soft soil. The research results show that the types of RHA insignificantly affect the change in Atterberg limits of cement-admixed soil. Regarding the soil strength, the RHA2 shows a higher efficiency in the enhancement of treated soil strength at 28 days of curing than the RHA1. The addition of 12% RHA2 to the cement-admixed soil can increase the UCS and E50 values of treated soil by more than 50%.


2019 ◽  
Vol 48 (2) ◽  
pp. 25-30
Author(s):  
Boriana Tchakalova

Plastic soil-cement is a type of soil stabilization used for the treatment of natural soil to improve its engineering properties. It is a hardened material prepared by mixing soil and Portland cement at a water content higher than optimum, usually near the liquid limit, without compaction at optimum water content to maximum dry density. In Bulgaria, this soil stabilization technique has been applied in foundation works in collapsible loess ground in order to replace a part of the collapsible layer, to increase the bearing capacity of the soil base and/or to isolate the geoenvironment from migration of pollutants. The aim of the current paper is to examine the effect of the clay content of the loess soil on the strength and permeability of plastic loess-cement. Results from the investigation indicate that the mechanical and hydraulic properties of the plastic loess-cement highly depend on the presence of clay fraction.


2018 ◽  
Vol 30 (3) ◽  
Author(s):  
Hamisu D. ◽  
Kundiri A.M. ◽  
Umar S.Y.

This paper presents an experimental study aimed at assessing the suitability of rice husk ash (RHA) treated black cotton soil as a barrier in Municipal Solid Waste (MSW) containment facility. Laboratory tests were conducted on black cotton soil treated with 5, 10 and 15% RHA at moulding water contents of 2 and 4% on both wet and dry sides of optimum moisture content (OMC) using British Standard Heavy (BSH) compactive effort. Index properties, hydraulic conductivity (k), volumetric shrinkage strain (VSS), and unconfined compressive strength (UCS) tests were conducted on all the samples. The results obtained indicated that the soil was classified as A-7-5(18) according to the American Association of States Highway and Transport Officials (AASHTO) classification system and Silt of high plasticity (MH) in accordance with the Unified Soil Classification System (USCS). It was observed that addition of RHA was accompanied with decrease in the plasticity index from 24 to as low as 3%. An improvement in the moisture-density relationship of the soils showed an increase in Maximum Dry Density (MDD) from 1.46 to 1.52 Mg/m3 as well as a decrease from 24.5 to 21.2% in OMC. The increase in RHA contents up to 10% brought about an improvement in the strength of the soil specimens by almost 332.4kN/m2 at 2% on the dry side of OMC. The VSS decreases with increase in RHA content to achieve the minimum shrinkage strain of 4.1% at 5% RHA treatment.


2021 ◽  
Vol 84 (1) ◽  
pp. 159-170
Author(s):  
Muhammad Syamsul Imran Zaini ◽  
Muzamir Hasan ◽  
Ling Sin Yie ◽  
Khairil Azman Masri ◽  
Ramadhansyah Putra Jaya ◽  
...  

The application of chemical stabilizer in soil stabilization can effectively reduce the negative environmental impact in the construction industry. However, the stabilization of soft clay remains a challenge due to the costly and non-eco-friendly materials such as cement and lime. This research demonstrates the combination of SF and ESA in stabilizing the kaolin soils, based on the basic engineering properties and undrained shear strength (USS). Its effect was studied via the inclusion as cement replacement material in kaolin soil at 2, 4 and 6% (by weight of dry soft kaolin clay soil) of SF and ESA substitutions of 3, 6 and 9% (by weight of dry soft kaolin clay and SF content). The result shows a considerably lower specific gravity (4.9% reduction), reduced plasticity index (PI)(48.4% reduction), decreased maximum dry density (MDD) (5.5% reduction), increased optimum moisture content (OMC)(8.7% increment), and higher USS (68.8%). In conclusion, the combinations of SF and ESA as soil stabilization agents successfully enhance the soil strength of the kaolin opening a route to the low cost and eco-friendly materials in soil stabilization.


Sign in / Sign up

Export Citation Format

Share Document