scholarly journals EFFECT OF DIFFERENT TYPES OF RICE HUSK ASH ON SOME GEOTECHNICAL PROPERTIES OF CEMENT-ADMIXED SOIL

2020 ◽  
Vol 53 (2C) ◽  
pp. 1-12
Author(s):  
Duong Nguyen

Rice husk ash (RHA) is an agricultural residue and has shown great potential for soil stabilization. However, the research on the utilization of RHA for soft soil improvement using cement deep mixing method is still limited and the efficiency of using different RHA types for soil improvement needs to be clarified. In this study, the effect of different RHA types on Atterberg limits, unconfined compressive strength (UCS), and elastic modulus (E50) of soil-cement mixtures will be investigated. Two types of RHA which obtained from open fire burning (RHA1) and burning in a furnace under controlled conditions of temperature and duration of burning (RHA2), were used for this study. The RHA contents from 0 to 15% and 10% cement of the dry weight of the soil were used to treat the soft soil. The research results show that the types of RHA insignificantly affect the change in Atterberg limits of cement-admixed soil. Regarding the soil strength, the RHA2 shows a higher efficiency in the enhancement of treated soil strength at 28 days of curing than the RHA1. The addition of 12% RHA2 to the cement-admixed soil can increase the UCS and E50 values of treated soil by more than 50%.

2019 ◽  
Vol 258 ◽  
pp. 01014
Author(s):  
Noorfaizah Hamzah ◽  
Nur ‘Ain Mat Yusof ◽  
Muhammad Ihsan Haziq Mohd Rahimi

Construction activities on peat soils are found to be extremely difficult as the soil is profound as soft soil and has low shear strength and high moisture content. Due to alternating swelling and shrinkage nature, it causes serious damage to the structure above it. This happens due to repetition of drying and wetting of soil. Stabilization of soil is commonly applied to improve the mechanical properties of soil prior to soil engineering works. This soil improvement method is advantageous and effective one by using waste materials. Waste in our country is divided in various types and it includes domestic wastes, industrial wasters, agricultural wastes etc. Because of difficulties to diminish these wastes without affect to environment and surroundings, it can be used as a stabilizing agent in the soil. Therefore, this experimental study carried out to evaluate the effect of Rice Husk Ash (RHA) and sawdust on engineering properties of the peat soil. The properties such as compaction and unconfined compressive strength are determined separately with sawdust and added of RHA in peat soil at a variety of percentages (2.5%, 5% etc.) in addition small amount of constant rate of lime with 2% of the dry soil weight. By obtaining the results, it can deduce a promising and improving result in stabilizing the soil with sawdust and Rice Husk Ash in both economic and strength capacity. This will not only solve the waste disposal problem but also enhance the strength characteristics of soil significantly.


2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
G. V. Rama Subbarao ◽  
D. Siddartha ◽  
T. Muralikrishna ◽  
K. S. Sailaja ◽  
T. Sowmya

Soil existing at a particular site may not be appropriate for construction of engineering structures. The present study made an attempt to enhance the geotechnical properties of a soil replaced with industrial wastes having pozzolanic value like rice husk ash (RHA) and fly ash (FA). Soil is replaced with RHA in 2%, 4%, and 6% to dry weight of soil. It is observed that soil replaced with 4% RHA is the optimum for the soil used in this study from geotechnical point of view. To know the influence of fly ash, soil is further replaced with 4% FA along with 4% RHA. It is found that results of soil replacement by both RHA and FA proved to be soil modification and not the improvement. Hence, a cost-effective accelerator like lime is used for further replacing the above soil-4%, RHA-4% FA mix. The optimum lime content is found to be 4%.


2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Son Bui Truong ◽  
Nu Nguyen Thi ◽  
Duong Nguyen Thanh

Soft soil is widely distributed in Vietnam, especially in the coastal area. In engineering practice, soft soil cannot be used to build any construction and needs to be improved or treated before building construction. In addition, Vietnam has many pig-iron or thermal power plants, which annually produce a huge amount of granulated blast furnace slag (GBFS). Thus, the use of this material for soft soil improvement needs to be considered. This paper presents experimental results on the unconfined compressive strength (UCS) of three Vietnam’s soft soils treated with Portland cement and Portland cement with ground granulated blast furnace slag (GGBFS). Binder dosage used in this study is 250, 300, and 350 kg/m3 with the three different water/cement ratios of 0.8, 0.9, and 1.0, respectively. The research results showed that the UCS of soil-cement mixtures depends on soil type, water/cement ratio, cement type, and binder content. Accordingly, the unconfined compressive strength increased with the increase of binder contents, the decrease of the natural water content of soft soil, water/cement ratios, and clay content. The highest value of UCS of treated soils was found for the soil at Site II with the Portland cement content, cement GGBFS, and water/cement ratio of 873 kg/m3, 2355 kg/m3, and 0.8, respectively. Besides, for all the three soils and two binder types, the water/cement ratio of 0.8 was found to be suitable to reach the highest UCS values of treated soil. The research results also showed that the UCS of treated soil with cement GGBFS was higher than that of treated soil with Portland cement. This indicated the effectiveness of the use of Portland cement with GGBFS in soft soil improvement. There is great potential for reducing the environmental problems regarding the waste materials from pig-iron plants in Vietnam and the construction cost as well.


2017 ◽  
Vol 728 ◽  
pp. 373-378
Author(s):  
Hatairat Poorahong ◽  
Naphol Yoobanpot

Compressive strength of soft soil improvement using cement only and cement partial replacement with bagasse ash were studied. The strength characteristic of stabilized soil was investigated with various curing times of 7, 14 and 28 days. Tested result reveal the stabilized soil strength have trend to increase with time. Using 20% of bagasse ash by dry weight was suggested as optimum content for cement replacement to obtain highest strength. Comparing with cement improved soil, the stabilized soil strength of 20% BA replacement had higher over 25% and modulus of elasticity (E50) was increased up to 37% at 28 days of curing. Change on stabilized soil structure was observed by scanning electron microscopy (SEM) reveal that the formation of hydration reaction product, CSH fabric and rod-like ettringite, have transformed stabilized soil structure denser and harder consequence increase in soil strength with time.


2019 ◽  
Vol 803 ◽  
pp. 331-337 ◽  
Author(s):  
Hengchhorn Phai ◽  
Amin Eisazadeh

Bangkok clay (BC) is notorious for its poor engineering properties in Thailand and world-widely. In terms of workability, it is significant to modify its naturally weak properties. Nowadays, humans are overusing Earth’s resources and generating so much waste. In consequence, eco-friendly and cost cutting improvements are appreciated in geotechnical field. At the same time, Rice Husk Ash (RHA) is a cheap potential material for soil improvement. Lime is also known as a common material used in soil stabilization both solely and mixed with other materials. An inevitable step to every soil stabilization is to perform compaction tests that gives basic notions to treat soil. In this experimental study, compaction tests were proceeded with soil mixed with 0%, 10%, 20%, 30%, 50% of Rice Husk Ash (RHA) by dry soil mass in replacement manner and added 0%, 4%, 8%, 12% of lime. Overall, the more RHA and lime amount is mixed with soil, the higher Optimum Moisture Content (OMC) gets. This means that when replacement/stabilizers are added more and more, the soil needs more water to reach its Maximum Dry Density (MDD). Unlike OMC, MDD reduces when quantity of additives is increased.


2013 ◽  
Vol 824 ◽  
pp. 59-65
Author(s):  
Thomas Stephen Ijimdiya

Oil contaminated soils (PCS) was treated with up to 6% rice husk ash (RHA) by dry weight of soil. Specimens of treated soil compacted at the energy of the standard Proctor (relative compaction = 100%) were subjected to compaction, unconfined compressive strength (UCS) and California bearing ratio (CBR) tests. The results of laboratory tests show that properties of the treated soil improved with RHA treatment. Peak unconfined compressive strength value of 410kN/m2 was obtained at 2% oil/ Applying the conventional evaluation criteria reveals that soil-oil RHA mixture containing 2% oil/4% RHA, 4% oil/4% RHA and 6% oil/4% RHA yields optimum CBR values of 4.6, 4.4 and 3.5% which does not satisfy the minimum required CBR of 15% for use as a subgrade material in road foundation.


2020 ◽  
Vol 6 (2) ◽  
pp. 402-417
Author(s):  
John Kok Hee Wong ◽  
Sien Ti Kok ◽  
Soon Yee Wong

Deep Soil Mix (DSM) is a proven method of ground improvement for deeper underlying soft soil layers which are otherwise impractical to reach using conventional shallow soil stabilization and replacement methods. The predominant binder materials used are Ordinary Portland cement (OPC) and Lime (CaO) but negative effects to the environment from manufacture and increasing construction cost have prompted research into alternative materials. This review identifies pozzolans and filler materials as possible supplements or partial substitutes for better results. The DSM method and binder reaction processes during treated soil strength development are outlined and effectiveness of different pozzolans (Fly Ash, Silica Fume, Ground Granulated Blast Furnace Slag, Rice Husk Ash, Kaolin, and Metakaolin) and filler materials (e.g. fine sand) discussed together with their influence factors. With many pozzolans, a clear optimum dosage is observed where improved strength peaks. Aluminosilicate pozzolans perform better over siliceous pozzolans with Metakaolin (MK) identified as the most effective pozzolan for enhancing compressive strength. Up to date research results on these materials are compiled. MK blended cements are readily available and can be readily applied for initial field tests. Treated soil strength may be regulated with addition of filler materials to further reduce reliance on cement.


2018 ◽  
Vol 34 ◽  
pp. 01012 ◽  
Author(s):  
Mohammed Ali Mohammed Al-Bared ◽  
Aminaton Marto ◽  
Indra Sati Hamonangan Harahap ◽  
Fauziah Kasim

Recycled blended ceramic tiles (RBT) is a waste material produced from ceramic tile factories and construction activities. RBT is found to be cost effective, sustainable, environmental-friendly and has the potential to be used as an additive in soft soil stabilization. Recent reports show that massive amounts of RBT are dumped into legal or illegal landfills every year consuming very large spaces and creating major environmental problems. On the other hand, dredged marine clay obtained from Nusajaya, Johor, Malaysia has weak physical and engineering characteristics to be considered as unsuitable soft soil that is usually excavated, dumped into landfills and replaced by stiff soil. Hence, this study investigates the suitability of possible uses of RBT to treat marine clay. Laboratory tests included Standard proctor tests and Atterberg limits tests. The plasticity of marine clay was evaluated by adding 10%, 20%, 30% and 40% of 0.3 mm RBT. In addition, the compaction behaviour of treated marine clay was compared by adding two different sizes (0.3 mm and 1.18 mm diameter) of RBT. For both coarse and fine sizes of RBT, 10%, 20%, 30% and 40% of the dry weight of the soft clay were added. The mixture of each combination was examined in order to evaluate the Maximum Dry Density (MDD) and the optimum moisture content (OMC) for the treated soft clay. MDD and OMC for soft untreated samples were 1.59 Mg/m3 and 22%, respectively. Treated samples with 10%, 20%, 30% and 40% of 0.30 mm size RBT resulted in a significant reduction of OMC ranged from 19 to 15% while MDD resulted in increment ranged from 1.69 to 1.77 Mg/m3. In addition, samples treated with 10%, 20%, 30% and 40% of 1.18 mm size RBT resulted in major reduction of OMC ranged from 15 to 13.5% while MDD increased effectively from 1.75 to 1.82 Mg/m3. For all mix designs of soft clay-RBT, MDD was gradually increasing and OMC was sharply reducing with further increments of both sizes of RBT.


2013 ◽  
Vol 47 (1-2) ◽  
pp. 55-66 ◽  
Author(s):  
Younes Bagheri ◽  
Fauziah Ahmad ◽  
Mohd Ashraf Mohamad Ismail

Sign in / Sign up

Export Citation Format

Share Document