Quasi-Static Characterization of Polyamide-Based Discontinuous CFRP Manufactured by Additive Manufacturing and Injection Molding

2019 ◽  
Vol 809 ◽  
pp. 386-391 ◽  
Author(s):  
Patrick Striemann ◽  
Daniel Hülsbusch ◽  
Michael Niedermeier ◽  
Frank Walther
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Injection Molding ◽  
Mechanical Characterization ◽  
Length Distribution ◽  
Deep Understanding ◽  
Raw Material ◽  
Void Content ◽  
Fused Deposition ◽  
Printing Direction

Generating serial components via additive manufacturing (AM) a deep understanding of process-related characteristics is necessary. The extrusion-based AM called fused layer manufacturing (FLM), also known as fused deposition modeling (FDM™) or fused filament fabrication (FFF) is an AM process for producing serial components. Improving mechanical properties of AM parts is done by adding fibers in the raw material to reinforce the polymer. The study aims to create a more detailed comprehension of FLM and process-related characteristics with their influence on the composite.Thereby, a short carbon fiber-reinforced polyamide (CarbonX™ Nylon, 3DXTECH, USA) with 12.5 wt.‑% fiber content, 7 μm fiber diameter, and 150 to 400 µm fiber length distribution was investigated. To separate process-related characteristics of FLM, reference specimens were fabricated via injection molding (IM) with single-batch material. For the mechanical characterization, quasi-static tensile tests were carried out in accordance to DIN 527‑2. Quality assessment including void content and void distribution was performed via micro-computed tomography (CT).The mechanical characterization clarifies effects on mechanical properties depending on process-related characteristics of FLM. CT scans show higher void contents of FLM specimens compared to IM specimens and void orientation dependent on printing direction. FLM shows process-related characteristics which generally strengthen mechanical properties of polymers. Nevertheless, tensile strength of FLM specimens decrease by more than 28% compared to quasi-homogenous IM specimens.

Recycling of PA-12 in Additive Manufacturing and the Improvement of its Mechanical Properties

2016 ◽  
Vol 674 ◽  
pp. 9-14 ◽  
Author(s):  
Piret Mägi ◽  
Andres Krumme ◽  
Meelis Pohlak
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Selective Laser Sintering ◽  
Raw Material ◽  
Positive Finding ◽  
Polyamide 12 ◽  
Fused Deposition ◽  
Micro Injection Moulding ◽  
Moulding Machine

This study explores possible ways to make Additive Manufacturing (AM) a cradle-to-cradle process, that is, use the leftover from one process as the raw material for another process. The main goal of this study is to develop a set of new polymeric blends with innovative properties, suitable for using in 3-D printing of prosthetic limbs using Fused Deposition Modeling (FDM) technology. Sustainable acting is achieved by reusing polymeric material left over from Selective Laser Sintering (SLS) processes for making raw material for FDM processes. Test specimens of polyamide 12 (PA-12) in its virgin form and used- , un-sintered form alongside specimens of used PA blended with TPU, aramid, or graphite, were produced in a micro-injection moulding machine and then tested for their mechanical properties. This paper provides information about the differences in mechanical characteristics of these different material blends. An unexpected but positive finding was that the differences between virgin and recycled PA-12 are insignificant. The aforementioned additives influenced PA-12 by producing specimens that responded with predictable characteristics which is a significant accomplishment as it lays the groundwork for the next stages of the project.

scholarly journals Engineering Thermoplastics for Additive Manufacturing: A Critical Perspective with Experimental Evidence to Support Functional Applications

2017 ◽  
Vol 15 (1) ◽  
pp. 10-18 ◽  
Author(s):  
Gianluca Cicala ◽  
Alberta Latteri ◽  
Barbara Del Curto ◽  
Alessio Lo Russo ◽  
Giuseppe Recca ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Injection Molding ◽  
Fused Deposition Modeling ◽  
Mechanical And Thermal Properties ◽  
Functional Applications ◽  
Fused Deposition ◽  
Industrial Grade ◽  
Raster Angle ◽  
Manufacturing Techniques

Background Among additive manufacturing techniques, the filament-based technique involves what is referred to as fused deposition modeling (FDM). FDM materials are currently limited to a selected number of polymers. The present study focused on investigating the potential of using high-end engineering polymers in FDM. In addition, a critical review of the materials available on the market compared with those studied here was completed. Methods Different engineering thermoplastics, ranging from industrial grade polycarbonates to novel polyetheretherketones (PEEKs), were processed by FDM. Prior to this, for innovative filaments based on PEEK, extrusion processing was carried out. Mechanical properties (i.e., tensile and flexural) were investigated for each extruded material. An industrial-type FDM machine (Stratasys Fortus® 400 mc) was used to fully characterize the effect of printing parameters on the mechanical properties of polycarbonate. The obtained properties were compared with samples obtained by injection molding. Finally, FDM samples made of PEEK were also characterized and compared with those obtained by injection molding. Results The effect of raster to raster air gap and raster angle on tensile and flexural properties of printed PC was evidenced; the potential of PEEK filaments, as novel FDM material, was highlighted in comparison to state of the art materials. Conclusions Comparison with injection molded parts allowed to better understand FDM potential for functional applications. The study discussed pros and cons of the different materials. Finally, the development of novel PEEK filaments achieved important results offering a novel solution to the market when high mechanical and thermal properties are required.

scholarly journals Effect of Porosity on Mechanical Properties of 3D Printed Polymers: Experiments and Micromechanical Modeling Based on X-Ray Computed Tomography Analysis

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1154 ◽  
Author(s):  
Wang ◽  
Zhao ◽  
Fuh ◽  
Lee
Keyword(s):  
Computed Tomography ◽  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Micromechanical Model ◽  
Micromechanical Modeling ◽  
X Ray ◽  
Fused Deposition ◽  
3D Printed ◽  
X Ray Computed

Additive manufacturing (commonly known as 3D printing) is defined as a family of technologies that deposit and consolidate materials to create a 3D object as opposed to subtractive manufacturing methodologies. Fused deposition modeling (FDM), one of the most popular additive manufacturing techniques, has demonstrated extensive applications in various industries such as medical prosthetics, automotive, and aeronautics. As a thermal process, FDM may introduce internal voids and pores into the fabricated thermoplastics, giving rise to potential reduction on the mechanical properties. This paper aims to investigate the effects of the microscopic pores on the mechanical properties of material fabricated by the FDM process via experiments and micromechanical modeling. More specifically, the three-dimensional microscopic details of the internal pores, such as size, shape, density, and spatial location were quantitatively characterized by X-ray computed tomography (XCT) and, subsequently, experiments were conducted to characterize the mechanical properties of the material. Based on the microscopic details of the pores characterized by XCT, a micromechanical model was proposed to predict the mechanical properties of the material as a function of the porosity (ratio of total volume of the pores over total volume of the material). The prediction results of the mechanical properties were found to be in agreement with the experimental data as well as the existing works. The proposed micromechanical model allows the future designers to predict the elastic properties of the 3D printed material based on the porosity from XCT results. This provides a possibility of saving the experimental cost on destructive testing.

scholarly journals EFFECT OF EXTRUSION PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF 3D PRINTED PLA PRODUCT

2021 ◽  
Vol 6 (2) ◽  
pp. 119
Author(s):  
Nanang Ali Sutisna ◽  
Rakha Amrillah Fattah
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Extrusion Process ◽  
Experimental Procedure ◽  
Fused Deposition ◽  
Novel Approach ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Digital Models

The method of producing items through synchronously depositing material level by level, based on 3D digital models, is named Additive Manufacturing (AM) or 3D-printing. Amongs many AM methods, the Fused Deposition Modeling (FDM) technique along with PLA (Polylactic acid) material is commonly used in additive manufacturing. Until now, the mechanical properties of the AM components could not be calculated or estimated until they've been assembled and checked. In this work, a novel approach is suggested as to how the extrusion process affects the mechanical properties of the printed component to obtain how the parts can be manufactured or printed to achieve improved mechanical properties. This methodology is based on an experimental procedure in which the combination of parameters to achieve an optimal from a manufacturing experiment and its value can be determined, the results obtained show the effect of the extrusion process affects the mechanical properties.

scholarly journals A Review Study on Mechanical Properties of Obtained Products by FDM Method and Metal/Polymer Composite Filament Production

2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Ümit Çevik ◽  
Menderes Kam
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Polymer Composite ◽  
Fused Deposition Modeling ◽  
Three Dimensional ◽  
Production Method ◽  
Context Analysis ◽  
Fused Deposition ◽  
Composite Filament ◽  
Metal Polymer

In addition to traditional manufacturing methods, Additive Manufacturing (AM) has become a widespread production technique used in the industry. The Fused Deposition Modeling (FDM) method is one of the most known and widely used additive manufacturing techniques. Due to the fact that polymer-based materials used as depositing materials by the FDM method in printing of parts have insufficient mechanical properties, the technique generally has limited application areas such as model making and prototyping. With the development of polymer-based materials with improved mechanical properties, this technique can be preferred in wider application areas. In this context, analysis of the mechanical properties of the products has an important role in the production method with FDM. This study investigated the mechanical properties of the products obtained by metal/polymer composite filament production and FDM method in detail. It was reviewed current literature on the production of metal/polymer composite filaments with better mechanical properties than filaments compatible with three-dimensional (3D) printers. As a result, it was found that by adding reinforcements of composites in various proportions, products with high mechanical properties can be obtained. Thus, it was predicted that the composite products obtained in this way can be used in wider application areas.

scholarly journals Investigation of a Short Carbon Fibre-Reinforced Polyamide and Comparison of Two Manufacturing Processes: Fused Deposition Modelling (FDM) and Polymer Injection Moulding (PIM)

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 672 ◽  
Author(s):  
Elena Verdejo de Toro ◽  
Juana Coello Sobrino ◽  
Alberto Martínez Martínez ◽  
Valentín Miguel Eguía ◽  
Jorge Ayllón Pérez
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Injection Moulding ◽  
New Technologies ◽  
Mechanical Response ◽  
Fused Deposition Modelling ◽  
Layer By Layer ◽  
Polymer Injection ◽  
Fused Deposition

New technologies are offering progressively more effective alternatives to traditional ones. Additive Manufacturing (AM) is gaining importance in fields related to design, manufacturing, engineering and medicine, especially in applications which require complex geometries. Fused Deposition Modelling (FDM) is framed within AM as a technology in which, due to their layer-by-layer deposition, thermoplastic polymers are used for manufacturing parts with a high degree of accuracy and minimum material waste during the process. The traditional technology corresponding to FDM is Polymer Injection Moulding, in which polymeric pellets are injected by pressure into a mould using the required geometry. The increasing use of PA6 in Additive Manufacturing makes it necessary to study the possibility of replacing certain parts manufactured by injection moulding with those created using FDM. In this work, PA6 was selected due to its higher mechanical properties in comparison with PA12. Moreover, its higher melting point has been a limitation for 3D printing technology, and a further study of composites made of PA6 using 3D printing processes is needed. Nevertheless, analysis of the mechanical response of standardised samples and the influence of the manufacturing process on the polyamide’s mechanical properties needs to be carried out. In this work, a comparative study between the two processes was conducted, and conclusions were drawn from an engineering perspective.

scholarly journals Additive Manufacturing of Bone Scaffolds Using PolyJet and Stereolithography Techniques

2021 ◽  
Vol 11 (16) ◽  
pp. 7336
Author(s):  
Shummaila Rasheed ◽  
Waqas Akbar Lughmani ◽  
Muhannad Ahmed Obeidi ◽  
Dermot Brabazon ◽  
Inam Ul Ahad
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Dimensional Accuracy ◽  
Human Bone ◽  
Compression Tests ◽  
3D Scaffold ◽  
Bone Scaffolds ◽  
3D Printed ◽  
Printing Direction ◽  
Printing Techniques

In this study, the printing capability of two different additive manufacturing (3D printing) techniques, namely PolyJet and micro-stereolithography (µSLA), are investigated regarding the fabrication of bone scaffolds. The 3D-printed scaffold structures are used as supports in replacing and repairing fractured bone tissue. Printed bone scaffolds with complex structures produced using additive manufacturing technology can mimic the mechanical properties of natural human bone, providing lightweight structures with modifiable porosity levels. In this study, 3D scaffold structures are designed with different combinations of architectural parameters. The dimensional accuracy, permeability, and mechanical properties of complex 3D-printed scaffold structures are analyzed to compare the advantages and drawbacks associated with the two techniques. The fluid flow rates through the 3D-printed scaffold structures are measured and Darcy’s law is applied to calculate the experimentally measured permeability. The Kozeny–Carman equation is applied for theoretical calculation of permeability. Compression tests were performed on the printed samples to observe the effects of the printing techniques on the mechanical properties of the 3D-printed scaffold structures. The effect of the printing direction on the mechanical properties of the 3D-printed scaffold structures is also analyzed. The scaffold structures printed with the µSLA printer demonstrate higher permeability and mechanical properties as compared to those printed using the PolyJet technique. It is demonstrated that both the µSLA and PolyJet printing techniques can be used to print 3D scaffold structures with controlled porosity levels, providing permeability in a similar range to human bone.

scholarly journals Considerations on the Applicability of Test Methods for Mechanical Characterization of Materials Manufactured by FDM

Materials ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 28 ◽  
Author(s):  
Amabel García-Domínguez ◽  
Juan Claver ◽  
Ana María Camacho ◽  
Miguel A. Sebastián
Keyword(s):  
Additive Manufacturing ◽  
Mechanical Characterization ◽  
Test Methods ◽  
Fused Deposition Modelling ◽  
Fused Deposition ◽  
General Test ◽  
Specific Standard ◽  
Characterization Of Materials ◽  
Definition Of

The lack of specific standards for characterization of materials manufactured by Fused Deposition Modelling (FDM) makes the assessment of the applicability of the test methods available and the analysis of their limitations necessary; depending on the definition of the most appropriate specimens on the kind of part we want to produce or the purpose of the data we want to obtain from the tests. In this work, the Spanish standard UNE 116005:2012 and international standard ASTM D638–14:2014 have been used to characterize mechanically FDM samples with solid infill considering two build orientations. Tests performed according to the specific standard for additive manufacturing UNE 116005:2012 present a much better repeatability than the ones according to the general test standard ASTM D638–14, which makes the standard UNE more appropriate for comparison of different materials. Orientation on-edge provides higher strength to the parts obtained by FDM, which is coherent with the arrangement of the filaments in each layer for each orientation. Comparison with non-solid specimens shows that the increase of strength due to the infill is not in the same proportion to the percentage of infill. The values of strain to break for the samples with solid infill presents a much higher deformation before fracture.

Sign in / Sign up

Export Citation Format

Share Document