Development of Toughened, Fine Grained, Recrystallized W-1.1%TiC

2021 ◽  
Vol 1024 ◽  
pp. 103-109
Author(s):  
Shunsuke Makimura ◽  
Hiroaki Kurishita ◽  
Koichi Niikura ◽  
Hun Chea Jung ◽  
Hiroyuki Ishizaki ◽  
...  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Fracture Strength ◽  
Room Temperature ◽  
Target Material ◽  
High Density ◽  
High Melting ◽  
High Melting Point ◽  
Irradiation Embrittlement ◽  
Fine Grained

Tungsten (W) is a principal candidate as target material because of its high density and extremely high melting point. W inherently has a critical disadvantage of its brittleness at around room temperature (low temperature brittleness), recrystallization embrittlement, and irradiation embrittlement. TFGR (Toughened, Fine Grained, Recrystallized) W-1.1%TiC has been considered as a realized solution to the embrittlement problems. We started to fabricate TFGR W-1.1%TiC in 2016 under collaboration between KEK and Metal Technology Co. LTD (MTC). The TFGR W-1.1%TiC samples were successfully fabricated in June, 2018. As a result, the specimen showed slight bend ductility and 2.6 GPa of fracture strength.

Facile synthesis of high‐melting point spherical TiC and TiN powders at low temperature

2019 ◽  
Vol 103 (2) ◽  
pp. 889-898 ◽  
Author(s):  
Maoqiao Xiang ◽  
Miao Song ◽  
Qingshan Zhu ◽  
Chaoquan Hu ◽  
Yafeng Yang ◽  
...  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
High Melting ◽  
High Melting Point ◽  
Facile Synthesis

Diverting phase transition of high-melting-point stearic acid to room temperature by microencapsulation in boehmite

RSC Advances ◽  
2013 ◽  
Vol 3 (44) ◽  
pp. 22326 ◽  
Author(s):  
Lin Pan ◽  
Qi Ji ◽  
Yuwei Qin ◽  
Yingchang Jiang ◽  
Zhongping Zhang ◽  
...  
Keyword(s):  
Phase Transition ◽  
Melting Point ◽  
Stearic Acid ◽  
Room Temperature ◽  
High Melting ◽  
High Melting Point

Microstructure and Mechanical Properties of Mg-Y Alloys

2011 ◽  
Vol 239-242 ◽  
pp. 352-355
Author(s):  
Quan An Li ◽  
Qing Zhang ◽  
Chang Qing Li ◽  
Yao Gui Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Rare Earth ◽  
Melting Point ◽  
Room Temperature ◽  
Optimum Combination ◽  
High Melting ◽  
High Melting Point ◽  
Microstructure And Mechanical Properties ◽  
The Matrix

The effects of 2-12 wt.% Y addition on the microstructure and mechanical properties of as-cast Mg-Y binary alloys have been investigated. The results show that proper content of rare earth Y addition can obviously refine the grains and form high melting point Mg24Y5 phases in the matrix, and improve the microstructure and mechanical properties of the alloys. At room temperature, the optimum combination of ultimate tensile strength and elongation, 195MPa and 7.5%, is obtained in Mg-10 wt.% Y alloy.

Effects of Nd on Mechanical Properties of Magnesium Alloy AZ91

2014 ◽  
Vol 488-489 ◽  
pp. 256-259
Author(s):  
Hui Zhen Jiang ◽  
Quan An Li ◽  
Xiao Ya Chen ◽  
Lei Lei Chen
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Melting Point ◽  
Magnesium Alloy ◽  
Room Temperature ◽  
High Melting ◽  
High Melting Point ◽  
Alloy Az91 ◽  
Magnesium Alloy Az91

The effect of Nd on the mechanical properties of magnesium alloy AZ91 has been studied. The results show that the addition of 1wt.%Nd can refine the grain size, cause the formation of high melting point Al2Nd phase and reduce the amount of β-Mg17Al12 phase. and enhance the mechanical properties of magnesium alloy AZ91 at room temperature and 150°C.

Core–Shell Transformation-Imprinted Solder Bumps Enabling Low-Temperature Fluidic Self-Assembly and Self-Alignment of Chips and High Melting Point Interconnects

2018 ◽  
Vol 10 (47) ◽  
pp. 40608-40613 ◽  
Author(s):  
Mahsa Kaltwasser ◽  
Udo Schmidt ◽  
Shantonu Biswas ◽  
Johannes Reiprich ◽  
Leslie Schlag ◽  
...  
Keyword(s):  
Melting Point ◽  
Low Temperature ◽  
Self Assembly ◽  
Core Shell ◽  
High Melting ◽  
High Melting Point ◽  
Solder Bumps

Theoretical Studies of Ni3Al and Nial with Impurities

1988 ◽  
Vol 133 ◽  
Author(s):  
S. P. Chen ◽  
A. F. Voter ◽  
A. M. Boring ◽  
R. C. Albers ◽  
P. J. Hay
Keyword(s):  
Melting Point ◽  
Creep Rate ◽  
Grain Boundaries ◽  
Intergranular Fracture ◽  
Room Temperature ◽  
Theoretical Studies ◽  
High Melting ◽  
High Melting Point ◽  
Embedded Atom ◽  
Room Temperature Ductility

ABSTRACTIntermetallic compounds have been extensively studied because of their superior strength, low creep rate, and high melting point [1,2]. However, room temperature ductility for the L12 and B2 phases are a continuing problem. Both L12 Ni3Al [3,4] and B2 NiAl [5,6] exhibit an intergranular fracture mode. Understanding grain boundaries in these materials is of particular importance since intergranular fracture limits the applicability of these otherwise promising materials. In an effort to understand the fracture mechanism, we have used embedded atom potentials [7] to study the properties of Ni 3Al [8,9,10] and NiAl [11]. We also consider the effect of boron, sulfur, and nickel segregation on the strength of grain boundaries in Ni3Al and NiAl. Many of the results presented here appear in literature elsewhere [8,9,10,11].

Effects of Ca on Mechanical Properties of Magnesium Alloy AZ81

2012 ◽  
Vol 198-199 ◽  
pp. 175-178
Author(s):  
Zhi Chen ◽  
Quan An Li ◽  
Wen Jian Liu ◽  
Xiao Jie Song
Keyword(s):  
Mechanical Properties ◽  
Melting Point ◽  
Magnesium Alloy ◽  
Room Temperature ◽  
High Melting ◽  
High Melting Point ◽  
Microstructure And Mechanical Properties ◽  
Ca Addition

The microstructure and mechanical properties of aged AZ81 magnesium alloy with Ca addition have been investigated. The results show that with proper content of Ca addition, the microstructure of AZ81 magnesium alloy is refined. Meanwhile, high melting point granular compounds Al4Ca are formed, and the quantity of β-Mg17Al12phase is reduced significantly. And the mechanical properties of AZ81 magnesium alloy are enhanced at room temperature and 150°C.

Consolidation of Ti Powder by a Compression Rotation Shearing System at Room Temperature - Effect of Pivot Rotation Speed on Consolidation

2011 ◽  
Vol 409 ◽  
pp. 3-8 ◽  
Author(s):  
Noboru Nakayama ◽  
S. Kato ◽  
Hiroyuku Takeishi ◽  
Hiroyuki Miki
Keyword(s):  
Melting Point ◽  
High Temperatures ◽  
High Speed ◽  
Room Temperature ◽  
High Vacuum ◽  
High Strength ◽  
High Melting ◽  
Metal Powders ◽  
High Melting Point ◽  
Molding Process

Ti has high strength, good corrosion resistance, is lightweight and shows good biocompatibility. It has thus been used extensively for mechanical and medical structural components. On the other hand, the disadvantages of Ti include a high melting point, ease of oxidization at high temperatures, low specific heat and low thermal conductivity. There are three specific problems associated with Ti metallurgy. The first is that powder metallurgical processing requires high temperatures and a high vacuum, the second is that samples produced by existing powder metallurgy techniques have a low density, and the third is the occurrence of burning because of a local temperature rise during the cutting process. Therefore, in the present work, a new high-speed, room-temperature molding process involving compression rotation shearing was developed. This method can be used for solidification of metal powders by enforced plastic flow and breaking of oxide films. Therefore, no external heat is required and the molding time is short. The proposed method represents an easy approach to consolidating high melting point metallic materials.

CRM MOLYBDENUM-50 RHENIUM

Alloy Digest ◽  
1970 ◽  
Vol 19 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Powder Metallurgy ◽  
Melting Point ◽  
Physical Properties ◽  
Heat Treating ◽  
Electrical Contacts ◽  
High Melting ◽  
High Melting Point ◽  
Temperature Performance

Abstract CRM MOLYBDENUM-50 RHENIUM is a high-melting-point alloy for applications such as electronics tube components, electrical contacts, thermionic converters, thermocouples, heating elements and rocket thrusters. All products are produced by powder metallurgy. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Mo-11. Producer or source: Chase Brass & Copper Company Inc..

Sign in / Sign up

Export Citation Format

Share Document