Border Surface Changes on the Edge of the Castings with Nodular Graphite

2005 ◽  
Vol 473-474 ◽  
pp. 153-158
Author(s):  
Katalin Szocs ◽  
Maria Vaida

The paper presents the study of the microstructure and ultrasound measurments by proeminent part of the nodular iron castings. The experiment has been made in the Havy Machine Factory in Clausenburg. The crossing speed of the ultasound increases near the edge of the castings. Analising the nodular iron microstructure by smoler castings, there occurs no graphite change. By bigger mouldings the shape of the graphite can change to a vermicular graphite near the edges. The thickness of the transformed stratum is of 0,1-0,3 mm. In the nodular graphite iron are acting the forces in the frontier-surface. After casting the evaporation of the magnezium increases near the edge of the castings. The changes of forces on frontier surface can be caused by the changes of the innere tension, and also by the interacting of moulding materials. Opinions regarding these two effects are contardictory in the technical literature. Our experiments have been made in the Heavy Machine Combinat (C.U.G) in Kolozsvar, on nodular iron containing different ferrit-pearlite proportions. The weight of castings varried between 0,5 kg and 8000 kg. The metalic melt necessary to nodulisation was produced inductive furnaces of 6,3 and 12 tons. Before treatment by magnezium alloy, the chemical composition of the iron melt varried between the following parameters, according to the different types of irons: 3,7-3.9% C, 0,2-1,4% Si, 0,1-1,0% Mn, max. 0,025% S, max. 0,05% P, 0,1-1,4% Cr,%, 0,05-0,3% Mo, 0,2-0,8% Cu, 0,2-2,0% Ni. The globularisation has been made in the Tundich-pot. The work-temperature was between 1450 and 1600 C. We used 1,8 – 2,2% FeSiMg and 0,4-1,6% FeSi for the nodulisation. Our target was the examination of the surface strata on the castings, using for mould mixtures with different chemical effect.

2013 ◽  
Vol 61 (3) ◽  
pp. 731-735
Author(s):  
A.W. Stadler ◽  
Z. Zawiślak ◽  
W. Stęplewski ◽  
A. Dziedzic

Abstract. Noise studies of planar thin-film Ni-P resistors made in/on Printed Circuit Boards, both covered with two different types of cladding or uncladded have been described. The resistors have been made of the resistive-conductive-material (Ohmega-Ply©) of 100 Ώ/sq. Noise of the selected pairs of samples has been measured in the DC resistance bridge with a transformer as the first stage in a signal path. 1/f noise caused by resistance fluctuations has been found to be the main noise component. Parameters describing noise properties of the resistors have been calculated and then compared with the parameters of other previously studied thin- and thick-film resistive materials.


2008 ◽  
Vol 59 (9) ◽  
Author(s):  
Eugenia Pantru ◽  
Gheorghit Jinescu ◽  
Rozalia R�dulescu ◽  
Antoneta Filcenco Olteanu ◽  
Cosmin Jinescu

This paper presents an intensive procedure used for the decontamination of the soils, which were radioactively contaminated by uranium, due to the occurrence of some antropic accidents, in order to limit the area�s pollution. The procedure used for the chemical decontamination of the polluted soils was the washing one and the decontamination degree is comparatively presented depending on the ultrasounds� presence and absence. The lab testes were performed on five types of soils , which were characterized from the granulometric, structural and chemical composition viewpoint, all these aspects represent the main factors, which determine the applied decontamination procedure�s limits and performances correlated with its utilization costs. The decontamination procedure�s kinetics for each type of soils was analyzed, using successively three different types of reagents (water, 0.1 M sulphuric acid solution and chloro-sodic solution � 100 g/L sodium chloride + 10 g/L sodium carbonate in water) for a solid to liquid ratio of 1:2, during 2 h, at a temperature of 20oC in a mechanic stirring system respectively in ultrasounds field. It was observed that the decontamination degree increases with up to 15-20% in case of the ultrasound field utilization comparing to the first case.


2018 ◽  
Vol 69 (8) ◽  
pp. 2306-2310
Author(s):  
Aureliana Caraiane ◽  
Razvan Leata ◽  
Veronica Toba ◽  
Doina Vesa ◽  
Luana Andreea Macovei ◽  
...  

The progress made in dentistry during the latest decades is due, conceptually, to the new, systemic vision of man, which has also taken place in this field of medicine. In this context, the link between organic and psychic is indestructible. Thus illness is understood as a drama in which the somatic process has a psychic value, and the mental one has a body value. It is known that the morphological and functional integrity of the dental system, health and vigorousness, gives the individual a state of well-being that affects his somatic and psychic health, as any disturbance at this level entails repercussions in psychological and social behavior. Such a disruption is the total edification that seriously alters not only the dental system but the whole organism, putting various biological and psychosocial problems to the practitioner. The total expression represents not only a physical disability but also a psychological one. A special importance in studying psychological changes at total edentulous presents the psychological aspects of senile involution. This is not only a theoretical but also a practical importance due to the increase in the number of elderly people. Through the researches of the present paper we intend to present the reality of the psychological manifestations in the total edentation, which is objectified on different methods of psychodiagnosis in the first part, in order for the second part to be addressed to problems of prosthetic psychotherapy.The study comprises a group of 43 patients, of whom 24 were men and 19 women with total uni or bimaxilar edentation. Total edentation can be and is responsible for somatopsychic alterations, along with other pathogens, general, local, social, which sometimes can take a dramatic form, converting, where the area is also favorable, a pure somatic disease, for those who are not in psychopathy or even psychosis, although these latter cases are extremely rare and especially in youngsters, which would disrupt not only the person�s behavior as an individual, but also their status, function and social integrity. The treatment of dental and psychological complex is mandatory for any patient, but especially for the elderly, where recovery is more difficult, with disease-specific disorders adding to those of senescence.


2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Donato Lacedonia ◽  
Giulia Scioscia ◽  
Piera Soccio ◽  
Massimo Conese ◽  
Lucia Catucci ◽  
...  

Abstract Background Idiopathic Pulmonary Fibrosis (IPF) is a degenerative interstitial lung disease with both a poor prognosis and quality of life once the diagnosis is made. In the last decade many features of the disease have been investigated to better understand the pathological steps that lead to the onset of the disease and, moreover, different types of biomarkers have been tested to find valid diagnostic, prognostic and therapy response predictive ones. In the complexity of IPF, microRNA (miRNAs) biomarker investigation seems to be promising. Methods We analysed the expression of five exosomal miRNAs supposed to have a role in the pathogenesis of the disease from serum of a group of IPF patients (n = 61) and we compared it with the expression of the same miRNAs in a group of healthy controls (n = 15). Results In the current study what emerged is let-7d down-regulation and, unexpectedly, miR-16 significant down-regulation. Moreover, through a cross-sectional analysis, a clustering of the expression of miR-16, miR-21 and miR-26a was found. Conclusions These findings could help the individuation of previously unknown key players in the pathophysiology of IPF and, most interestingly, more specific targets for the development of effective medications.


2020 ◽  
Vol 4 (Supplement_1) ◽  
pp. 408-408
Author(s):  
Eric Vogelsang

Abstract Despite the well-established benefits of social participation for individuals and communities, little is known about how it varies throughout the life course. Drawing upon data collected between 1957 and 2011 by the Wisconsin Longitudinal Study (22,023 observations from a cohort of 6,627), this study provides four valuable results. One, I find evidence of five distinct social participation trajectories between the ages of 35 and 71; the majority of which demonstrate social disengagement over time. Two, these participation declines are primarily attributable to changes in meeting friends and group exercise activity. Three, the most pronounced activity differences separating those in more favorable and unfavorable participation trajectories are cultural event attendance and voluntary group membership. Lastly, I identify particular high school activities that are associated with social participation decades later. In total, these results highlight heterogeneity among different types of social activities, and underscore the possible consequences of membership decisions made in early adulthood.


Author(s):  
Inge Lotsberg

The DNV-RP-C203 Fatigue Design of Offshore Steel Structures is being used by a number of different companies for fatigue assessment of different types of structures. This has resulted in questions to DNV about background for the different sections in the document. It is therefore important that the basis for this document is open to the industry. Quite a lot of the background material has also been published earlier at conferences and in journals. In some situations it has been found that the content can be improved to better suite the industry. The document is presented in an electronic version making revisions easy. Therefore it has been revised several times since the last official presentation of a revision in 2005. The present paper gives an overview of the most significant changes made in the document since the 2005 revision. Some of these changes are already included in the present version of DNV-RP-C203. The remaining changes will be included in a revision dated 2010.


Development ◽  
1964 ◽  
Vol 12 (4) ◽  
pp. 609-619
Author(s):  
Anna Hell

Enormous progress has been made in the last few years towards the elucidation of the mechanism of protein synthesis, and great interest is centred on the steps leading to cellular differentiation and specific protein synthesis. We know that genetic information is passed on from one generation of cells to the next by deoxyribonucleic acid (DNA), and that this material directs all protein synthesis by the intermediary of the different types of ribonucleic acid (RNA). A simple in vitro system described by O'Brien (1959) seemed to offer an excellent tool for the study of the differentiation of the blood islands, and the initial formation of a well-known protein, haemoglobin (Hb), in chick embryonic tissues. After de-embryonation, chick blastoderms, from the stage of primitive streak onwards, can be cultured in vitro on a saline agar medium supplemented with glucose.


1979 ◽  
Vol 78 (1) ◽  
pp. 201-211
Author(s):  
C. K. LANGLEY

(1) Thermal acclimation of the Fi neurone does not appear to result from changes in the chemical composition of the haemolymph. This is deduced from the lack of effect on the electrical characteristics of control neurones of either pooled haemolymph from acclimated individuals, or variations in the experimental salines made in accordance with haemolymph analyses. (2) Changes in [Ca]0 tended to act cooperatively with temperature shifts to induce alterations in the electrical properties of the neurone, notably to increase excitability and lower membrane resistance. (3) Warm acclimation was associated with increased resting conductance of the neuronal membrane to sodium and potassium, whereas chloride conductance appeared little affected.


2021 ◽  
Vol 70 (1) ◽  
pp. 31-41
Author(s):  
Dawid Goździk ◽  
Bartosz Fikus ◽  
Jacek Kijewski

Manufacturers offer different types of ballistic barrels made in according to various standards. The paper presents comparison of three types of ballistic barrels: pressure, velocity and accuracy made according to C.I.P. and NATO EPVAT standards. Projectile velocities in a several measuring points on the flight path and propellant gas pressures in the barrels were measured and compared. The main aim of the article is to discuss whether all types of barrels to conduct most ballistic tests are needed, or whether one, the most universal in a specific caliber is enough. Keywords: mechanical engineering, ballistics, firearm, ammunition researches, ballistic properties


Sign in / Sign up

Export Citation Format

Share Document