Mechanical and Tribological Properties of Ti6Al4V Hardened by Double Glow Plasma Hydrogen-Free Carbonitriding

2005 ◽  
Vol 475-479 ◽  
pp. 3951-3954 ◽  
Author(s):  
Gao Hui Zhang ◽  
Zhi Yong He ◽  
Jun De Pan ◽  
Ping Ze Zhang ◽  
Zhong Xu
Keyword(s):  
Depth Profile ◽  
Friction And Wear ◽  
Chemical Properties ◽  
Wear Test ◽  
Mechanical And Tribological Properties ◽  
C And N ◽  
Glow Plasma ◽  
Physical And Chemical ◽  
Plasma Surface Alloying ◽  
And Chemical Properties

By means of double glow plasma surface alloying process, Ti6Al4V surface was successively carbonitrided forming a layer with special physical and chemical properties. The depth profile of C and N elements showed a tendency of gradual decrease on the Ti6Al4V as well as the depth profile of its hardness. Friction and wear test indicate that the wear resistant property is increased greatly after carbonitriding the Ti6Al4V.

Experimental Research on Tribological Properties of Mn0.78Zn0.22Fe2O4 Magnetic Fluids

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Wang Li-jun ◽  
Guo Chu-wen ◽  
Ryuichiro Yamane
Keyword(s):  
Tribological Properties ◽  
Friction And Wear ◽  
Chemical Properties ◽  
Friction Reduction ◽  
Experimental Investigations ◽  
Wear Scar Diameter ◽  
Base Oil ◽  
Turbine Oil ◽  
Physical And Chemical ◽  
And Chemical Properties

The synthesis and application of nanometer-sized particles have received considerable attention in recent years because of their different physical and chemical properties from those of the bulk materials or individual molecules; however, few experimental investigations on the tribological properties of lubricating oils with and without nanoferromagnetic particles have been performed. This work investigates the tribological properties of Mn0.78Zn0.22Fe2O4 nanoferromagnetic as additive in 46# turbine oil using a four-ball friction and wear tester. It is shown that the 46# turbine oil containing Mn0.78Zn0.22Fe2O4 nanoparticles has much better friction reduction and antiwear abilities than the base oil. The 46# turbine oil doped with 6wt%Mn0.78Zn0.22Fe2O4 nanoparticles show the best tribological properties among the tested oil samples, and PB value is increased by 26%, and the decreasing percentage of wear scar diameter is 25.45% compared to base oil.

Statistical criteria of stellar population types

1966 ◽  
Vol 24 ◽  
pp. 101-110
Author(s):  
W. Iwanowska
Keyword(s):  
Stellar Population ◽  
Chemical Properties ◽  
Spectrophotometric Study ◽  
Physical And Chemical Properties ◽  
Population Type ◽  
The Galaxy ◽  
Distribution Parameters ◽  
Physical And Chemical ◽  
Statistical Criteria ◽  
And Chemical Properties

In connection with the spectrophotometric study of population-type characteristics of various kinds of stars, a statistical analysis of kinematical and distribution parameters of the same stars is performed at the Toruń Observatory. This has a twofold purpose: first, to provide a practical guide in selecting stars for observing programmes, second, to contribute to the understanding of relations existing between the physical and chemical properties of stars and their kinematics and distribution in the Galaxy.

Tailoring microstructures of materials through biomimetics

1993 ◽  
Vol 51 ◽  
pp. 500-501
Author(s):  
Mehmet Sarikaya ◽  
Ilhan A. Aksay
Keyword(s):  
Chemical Properties ◽  
Design And Synthesis ◽  
Structure Sensitive ◽  
Macro Scale ◽  
Methods Of Synthesis ◽  
Successive Level ◽  
Engineering Materials ◽  
Physical And Chemical ◽  
And Chemical Properties ◽  
Synthesis Of Materials

Biomimetics involves investigation of structure, function, and methods of synthesis of biological composite materials. The goal is to apply this information to the design and synthesis of materials for engineering applications.Properties of engineering materials are structure sensitive through the whole spectrum of dimensions from nanometer to macro scale. The goal in designing and processing of technological materials, therefore, is to control microstructural evolution at each of these dimensions so as to achieve predictable physical and chemical properties. Control at each successive level of dimension, however, is a major challenge as is the retention of integrity between successive levels. Engineering materials are rarely fabricated to achieve more than a few of the desired properties and the synthesis techniques usually involve high temperature or low pressure conditions that are energy inefficient and environmentally damaging.In contrast to human-made materials, organisms synthesize composites whose intricate structures are more controlled at each scale and hierarchical order.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

THE IMPORTANCE OF THE RED BOOK OF SOILS FOR MONITORING AND JUSTIFICATION OF CONSERVATION MEASURES

2020 ◽  
Author(s):  
O.S. Bezuglova ◽  
Keyword(s):  
Chemical Properties ◽  
Natural State ◽  
Soil Maps ◽  
Rostov Region ◽  
Conservation Measures ◽  
Background Data ◽  
The Russian Federation ◽  
Physical And Chemical ◽  
And Chemical Properties

Rostov Region belongs to the highly protected natural territories characterized by the continuous plowing. There territories are the only reserves with the soils preserved in their natural state. However, these areas often lack detailed information about the soils quality and composition. Surveying soils on these territories is crucial for determination of their basic physical and chemical properties. The resulted compilation of soil maps could lay a foundation for creating the Red Book of Soils and the formation of a section in the soil-geographical database of the Russian Federation. Subsequently, such information can be used as a background data for the main types of soils in the region. It will be also valuable during monitoring and justification of conservation measures.

Sign in / Sign up

Export Citation Format

Share Document