Preparation of Ternary Compound BaLi2Ti6O14 by the Sol-Gel Process

2006 ◽  
Vol 510-511 ◽  
pp. 102-105 ◽  
Author(s):  
Lorena L. Garza-Tovar ◽  
Leticia M. Torres-Martínez
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Solid State ◽  
Sol Gel ◽  
Ammonium Hydroxide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Heat Treated ◽  
Sol Gel Process ◽  
Ceramic Compound

Ceramic compound with the formula BaLi2Ti6O14 was prepared by sol-gel method at basic conditions, using ammonium hydroxide as hydrolysis catalyst. Some portions of gel sample obtained were heat treated at 200, 400, 600, and 800°C. Samples were characterized by X-ray diffraction (XRD), thermal analysis (DTA-TGA), UV-Vis and FTIR. Crystalline phase was formed when a sample was treated at 800°C for 6h. This material has been previously synthesized by solid state reaction using temperatures as high as 900-1150°C for 2 to 10 days. The crystal structure of BaLi2Ti6O14 is similar to that corresponding strontium containing phase, SrLi2Ti6O14, which has been reported as catalyst for oxidative dehydrogenation of lower alkanes.

Luminescent Properties of Zn2SiO4:Eu3+,Dy3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 217-219 ◽  
pp. 733-736
Author(s):  
Xiu Mei Han ◽  
Shu Ai Hao ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir

Zn2SiO4:Eu3+, Dy3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. The results of XRD indicated that the phosphors crystallized completely at 1000oC. In Zn2SiO4:Eu3+,Dy3+ phosphors, the Eu3+ and Dy3+ show their characteristic red(613nm, 5D0-7F2), blue (481nm, 4F9/2–6H15/2) and yellow (577nm, 4F9/2–6H13/2) emissions.

Study on the Synthesis of Nano-Crystalline Mg2SiO4 Powders by Aqueous Sol-Gel Process

2013 ◽  
Vol 538 ◽  
pp. 142-145 ◽  
Author(s):  
X.F. Chen ◽  
J. Li ◽  
T.T. Feng ◽  
Y.S. Jiang ◽  
X.H. Zhang ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Sol Gel ◽  
Magnesium Nitrate ◽  
Metal Alkoxides ◽  
X Ray Diffraction ◽  
Calcination Process ◽  
X Ray ◽  
Nano Crystalline ◽  
Sol Gel Process ◽  
Scanning Electron

The forsterite-structure Mg2SiO4 was successfully synthesized by the aqueous sol-gel method using Si sols dioxide and magnesium nitrate as starting materials instead of expensive organic solvent and metal alkoxides. The as-prepared nanopowders were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscope (SEM), respectively. The results showed that the calcination process of gel consisted of a series of oxidation and combustion reactions, accompanied by significantly exothermal effects. Highly reactive nanosized Mg2SiO4 powders were successfully obtained at 850 °C with particle size of 60~80 nm.

Study of Pseudoboehmite Synthesis by Sol-Gel Process

2006 ◽  
Vol 45 ◽  
pp. 260-265 ◽  
Author(s):  
Antônio Hortêncio Munhoz Jr. ◽  
Leila Figueiredo de Miranda ◽  
G.N. Uehara
Keyword(s):  
Sol Gel ◽  
Thermo Gravimetric Analysis ◽  
Ammonium Hydroxide ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sol Gel Process ◽  
Different Temperatures ◽  
Sol Gel Synthesis

A pseudoboehmite was obtained by sol-gel synthesis using aluminum nitrate as precursor. It was used a 2n full factorial design for studying the effect of the temperature of synthesis, the concentration of ammonium hydroxide, and the radiation dose in the product of sol-gel synthesis. The product of the synthesis was analyzed by scanning electron microscopy, x-ray diffraction of the product (after firing the pseudoboehmite at different temperatures), and it was also analyzed the temperature of endothermic and exothermic transformations using the thermo gravimetric analysis (TG) and differential scanning calorimetry (DSC). The X-ray diffraction data show that α-alumina was obtained at 1100o C.

Luminescent Properties of MgLaLiSi2O7:Eu3+ Phosphors via Sol-Gel Process

2012 ◽  
Vol 512-515 ◽  
pp. 178-181
Author(s):  
Xiu Mei Han ◽  
Deng Hui Ren ◽  
Ying Ling Wang ◽  
Gui Fang Sun ◽  
Xi Wei Qi
Keyword(s):  
Thermal Analysis ◽  
Ir Spectra ◽  
Sol Gel ◽  
Luminescent Properties ◽  
Photoluminescence Spectra ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process ◽  
Ft Ir ◽  
The Eu

MgLaLiSi2O7:Eu3+ phosphors have been prepared through the sol-gel process. X-ray diffraction (XRD), thermogravimetric and ddifferential thermal analysis (TG-DTA), FT-IR spectra and photoluminescence spectra were used to characterize the resulting phosphors. FT-IR spectra suggested that crystallized silicates have formed in the powders annealed at 1050°C. The results of XRD indicated that the phosphors crystallized completely at 1050°C. In MgLaLiSi2O7:Eu3+ phosphors, the Eu3+ shows its characteristic red (613nm, 5D0–7F2) emissions.

Synthesis, crystal structure, luminescence, and photocatalytic properties of a 2D Cu(II) metal-organic frameworks based on 3,5-di(1H-benzimidazol-1-yl)pyridine and 4,4′-oxybis(benzoate) ligands

2020 ◽  
Vol 75 (8) ◽  
pp. 727-732
Author(s):  
Chen Zhang ◽  
Jian-Qing Tao
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Uv Light ◽  
Metal Organic Framework ◽  
Metal Organic Frameworks ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Photocatalytic Activities ◽  
Metal Organic

AbstractA new Cu(II) metal-organic framework, [Cu(L)(OBA)·H2O]n (1) [H2OBA = 4,4′-oxybis(benzoic acid), L = 3,5-di(1H-benzimidazol-1-yl)pyridine] was hydrothermally synthesized and characterized through IR spectroscopy, elemental and thermal analysis and single-crystal X-ray diffraction. Complex 1 is a four-connected uni-nodal 2D net with a (44·62) topology which shows an emission centered at λ ∼393 nm upon excitation at λ = 245 nm. Moreover, complex 1 possesses high photocatalytic activities for the decomposition of Rhodamine B (RhB) under UV light irradiation.

On tungstates of divalent cations (III) – Pb5O2[WO6]

2020 ◽  
Vol 235 (8-9) ◽  
pp. 311-317
Author(s):  
Stephan G. Jantz ◽  
Florian Pielnhofer ◽  
Henning A. Höppe
Keyword(s):  
Crystal Structure ◽  
Thermal Analysis ◽  
Quantum Chemical ◽  
Density Functional ◽  
Divalent Cations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
First Results ◽  
Electrostatic Calculations

Abstract${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ was discovered as a frequently observed side phase during our investigation on lead tungstates. Its crystal structure was solved by single-crystal X-ray diffraction ($P{2}_{1}/n$, $a=7.4379\left(2\right)$ Å, $b=12.1115\left(4\right)$ Å, $c=10.6171\left(3\right)$ Å, $\beta =90.6847\left(8\right)$°, $Z=4$, ${R}_{\text{int}}=0.038$, ${R}_{1}=0.020$, $\omega {R}_{2}=0.029$, 4188 data, 128 param.) and is isotypic with ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{Te}}_{6}\right]$. ${\text{Pb}}_{5}{\text{O}}_{2}\left[{\text{WO}}_{6}\right]$ comprises a layered structure built up by non-condensed [WO6]${}^{6-}$ octahedra and ${\left[{\text{O}}_{4}{\text{Pb}}_{10}\right]}^{12+}$ oligomers. The compound was characterised by spectroscopic measurements (Infrared (IR), Raman and Ultraviolet–visible (UV/Vis) spectra) as well as quantum chemical and electrostatic calculations (density functional theory (DFT), MAPLE) yielding a band gap of 2.9 eV fitting well with the optical one of 2.8 eV. An estimation of the refractive index based on the Gladstone-Dale relationship yielded $n\approx 2.31$. Furthermore first results of the thermal analysis are presented.

A MOF based on a lead(II) 2-oxido-6-methylpyridine-4-carboxylate network

2020 ◽  
Vol 75 (4) ◽  
pp. 365-369
Author(s):  
Long Tang ◽  
Yu Pei Fu ◽  
Na Cui ◽  
Ji Jiang Wang ◽  
Xiang Yang Hou ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Carboxylic Acid ◽  
Thermogravimetric Analysis ◽  
Metal Organic Framework ◽  
X Ray Diffraction ◽  
X Ray ◽  
Connected Node ◽  
Metal Organic ◽  
Solid State Fluorescence

AbstractA new metal-organic framework, [Pb(hmpcaH)2]n (1), has been hydrothermally synthesized from Pb(OAc)2 · 3H2O and 2-hydroxy-6-methylpyridine-4-carboxylic acid (hmpcaH2; 2), and characterized by IR spectroscopy, elemental and thermogravimetric analysis, and single-crystal X-ray diffraction. In complex 1, each hmpcaH− ligand represents a three-connected node to combine with the hexacoordinated Pb(II) ions, generating a 3D binodal (3,6)-connected ant network. The crystal structure of 2 was determined. The solid-state fluorescence properties of 1 and 2 were investigated.

scholarly journals Investigation of Solvatomorphism and Its Photophysical Implications for Archetypal Trinuclear Au3(1-Methylimidazolate)3

Molecules ◽  
2021 ◽  
Vol 26 (15) ◽  
pp. 4404
Author(s):  
Shengyang Guan ◽  
David C. Mayer ◽  
Christian Jandl ◽  
Sebastian J. Weishäupl ◽  
Angela Casini ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Solid State ◽  
Density Functional ◽  
Bulk Material ◽  
Variable Temperature ◽  
Active Phase ◽  
Solvent Free ◽  
X Ray Diffraction ◽  
X Ray ◽  
Aurophilic Interactions

A new solvatomorph of [Au3(1-Methylimidazolate)3] (Au3(MeIm)3)—the simplest congener of imidazolate-based Au(I) cyclic trinuclear complexes (CTCs)—has been identified and structurally characterized. Single-crystal X-ray diffraction revealed a dichloromethane solvate exhibiting remarkably short intermolecular Au⋯Au distances (3.2190(7) Å). This goes along with a dimer formation in the solid state, which is not observed in a previously reported solvent-free crystal structure. Hirshfeld analysis, in combination with density functional theory (DFT) calculations, indicates that the dimerization is generally driven by attractive aurophilic interactions, which are commonly associated with the luminescence properties of CTCs. Since Au3(MeIm)3 has previously been reported to be emissive in the solid-state, we conducted a thorough photophysical study combined with phase analysis by means of powder X-ray diffraction (PXRD), to correctly attribute the photophysically active phase of the bulk material. Interestingly, all investigated powder samples accessed via different preparation methods can be assigned to the pristine solvent-free crystal structure, showing no aurophilic interactions. Finally, the observed strong thermochromism of the solid-state material was investigated by means of variable-temperature PXRD, ruling out a significant phase transition being responsible for the drastic change of the emission properties (hypsochromic shift from 710 nm to 510 nm) when lowering the temperature down to 77 K.

Sign in / Sign up

Export Citation Format

Share Document