Reduction of Nanometric Magnetite Powder

2007 ◽  
Vol 555 ◽  
pp. 273-278 ◽  
Author(s):  
Lj. Vulićević ◽  
N. Ivanović ◽  
N. Popović ◽  
V. Kusigerski ◽  
Milesa Srećković ◽  
...  
Keyword(s):  
Recovery Process ◽  
Pure Hydrogen ◽  
Isothermal Heating ◽  
Oxidation Processes ◽  
Hydrogen Recovery ◽  
Oxide Powders ◽  
Diffusion Controlled ◽  
Vapor Stream ◽  
Two Stages ◽  
Kinetics Of

The investigated nanometric magnetite powders were synthesized electrochemically, and examined by XRD and SEM techniques. Their reduction was conducted through the isothermal heating in hydrogen in the temperature range from 600 to 860 K. Kinetics of the hydrogen recovery process during oxidation of freshly formed Fe powders in a water vapor stream was also studied. It was assumed that the solid-gas reaction is diffusion controlled, and Jander’s model was applied to describe it. The experimental data suggest that the reoxidation process proceeds in two stages, at various activation energies. By changing the conditions of the electrochemical (EC) process we were able to produce the iron oxide powders with optimal particle size and activity, for pure hydrogen production through appropriate reduction/oxidation processes.

Studies on the Behavior Some Paints in Electro-insulating Fluid Based on Vegetable Esters

2018 ◽  
Vol 69 (5) ◽  
pp. 1139-1144
Author(s):  
Iosif Lingvay ◽  
Adriana Mariana Bors ◽  
Livia Carmen Ungureanu ◽  
Valerica Stanoi ◽  
Traian Rus
Keyword(s):  
Structural Changes ◽  
Oxidation Processes ◽  
High Oleic ◽  
Painting Materials ◽  
Insulating Paper ◽  
Different Types ◽  
Mechanism And Kinetics ◽  
Kinetics Of ◽  
Natural Ester

For the purpose of using three different types of painting materials for the inner protection of the transformer vats, their behavior was studied under actual conditions of operation in the transformer (thermal stress in electro-insulating fluid based on the natural ester in contact with copper for electro-technical use and electro-insulating paper). By comparing determination of the content in furans products (HPLC technique) and gases formed (by gas-chromatography) in the electro-insulating fluid (natural ester with high oleic content) thermally aged at 130 �C to 1000 hours in closed glass vessels, it have been found that the presence the investigated painting materials lead to a change in the mechanism and kinetics of the thermo-oxidation processes. These changes are supported by oxygen dissolved in oil, what leads to decrease both to gases formation CO2, CO, H2, CH4, C2H4 and C2H6) and furans products (5-HMF, 2-FOL, 2 -FAL and 2-ACF). The painting materials investigated during the heat treatment applied did not suffer any remarkable structural changes affecting their functionality in the electro-insulating fluid based on vegetable esters.

scholarly journals Synthesis and Polymerization Kinetics of Rigid Tricyanate Ester

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1686
Author(s):  
Andrey Galukhin ◽  
Roman Nosov ◽  
Ilya Nikolaev ◽  
Elena Melnikova ◽  
Daut Islamov ◽  
...  
Keyword(s):  
Kinetic Analysis ◽  
Single Step ◽  
Polymerization Kinetics ◽  
Scanning Calorimetry ◽  
Modulated Differential Scanning Calorimetry ◽  
Diffusion Controlled ◽  
Polymerization Product ◽  
The One ◽  
Kinetics Of

A new rigid tricyanate ester consisting of seven conjugated aromatic units is synthesized, and its structure is confirmed by X-ray analysis. This ester undergoes thermally stimulated polymerization in a liquid state. Conventional and temperature-modulated differential scanning calorimetry techniques are employed to study the polymerization kinetics. A transition of polymerization from a kinetic- to a diffusion-controlled regime is detected. Kinetic analysis is performed by combining isoconversional and model-based computations. It demonstrates that polymerization in the kinetically controlled regime of the present monomer can be described as a quasi-single-step, auto-catalytic, process. The diffusion contribution is parameterized by the Fournier model. Kinetic analysis is complemented by characterization of thermal properties of the corresponding polymerization product by means of thermogravimetric and thermomechanical analyses. Overall, the obtained experimental results are consistent with our hypothesis about the relation between the rigidity and functionality of the cyanate ester monomer, on the one hand, and its reactivity and glass transition temperature of the corresponding polymer, on the other hand.

Comparative investigation on the removal of methyl orange from aqueous solution using three different advanced oxidation processes

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Zahia Benredjem ◽  
Karima Barbari ◽  
Imene Chaabna ◽  
Samia Saaidia ◽  
Abdelhak Djemel ◽  
...  
Keyword(s):  
Methyl Orange ◽  
Current Density ◽  
Advanced Oxidation Processes ◽  
Degradation Rate ◽  
Supporting Electrolyte ◽  
Advanced Oxidation ◽  
Comparative Investigation ◽  
Oxidation Processes ◽  
The Comparative Study ◽  
Kinetics Of

Abstract The Advanced Oxidation Processes (AOPs) are promising environmentally friendly technologies for the treatment of wastewater containing organic pollutants in general and particularly dyes. The aim of this work is to determine which of the AOP processes based on the Fenton reaction is more effective in degrading the methyl orange (MO) dye. The comparative study of the Fenton, photo-Fenton (PF) and electro-Fenton (EF) processes has shown that electro-Fenton is the most efficient method for oxidizing Methyl Orange. The evolution of organic matter degradation was followed by absorbance (discoloration) and COD (mineralization) measurements. The kinetics of the MO degradation by the electro-Fenton process is very rapid and the OM degradation rate reached 90.87% after 5 min. The influence of some parameters such as the concentration of the catalyst (Fe (II)), the concentration of MO, the current density, the nature and the concentration of supporting electrolyte was investigated. The results showed that the degradation rate increases with the increase in the applied current density and the concentration of the supporting electrolyte. The study of the concentration effect on the rate degradation revealed optimal values for the concentrations 2.10−5 M and 75 mg L−1 of Fe (II) and MO respectively.

Primary products and processes in the γ-radiolysis of 2-methyltetrahydrofuran

1965 ◽  
Vol 285 (1402) ◽  
pp. 319-338 ◽  
Keyword(s):  
Glassy Phase ◽  
Kcal Mole ◽  
Radical Species ◽  
Molecule Reaction ◽  
Positive Ions ◽  
Primary Products ◽  
Diffusion Controlled ◽  
Thermal Bleaching ◽  
The Matrix ◽  
Kinetics Of

From a study of the u. v., visible, near i. r. and e. s. r. spectra induced by γ -irradiation at 77°K in glassy MTHF and in glassy MTHF containing various additives and from a study of controlled temperature increases on these spectra, the following conclusions are drawn. (1) The primary products of the radiolysis are electrons ( e - ) and positive ions ( MTHF + ) which undergo a rapid ion-molecule reaction to give O CH 3 radicals ( R ⋅). (2) e - can either be trapped in the glassy MTHF matrix or can be captured by either napththalene, ferric chloride, carbon tetrachloride, nitrous oxide or trans -stilbene if these substances are present. (3) The e - T are bleachable by light or heat and disappear independently of the radicals R⋅ without either augmentation of R⋅ or the production of any new radical species. (4) e - T and R⋅ disappear thermally and independently by second-order reactions, the rate constants being K e - + e - (M -1 S -1 ) = 10 12⋅4±1⋅1 exp ─ [0⋅85 ± 0⋅10 kcal/mole/ R ( T ─ 75)] and K R˙ + R˙ (M -1 S -1 ) = 10 13⋅3±1⋅4 exp ─ [1⋅20 ± 0⋅15 kcal/mole/ R ( T ─ 75)]. These rate expressions suggest that both reactions are diffusion controlled at low temperatures in the glassy phase. (5) The kinetics of the thermal bleaching of e - T indicate that the electrons migrate distances of about 150 Å from their parent positive ions before being trapped in the matrix. (6) The effect of FeCl 3 in reducing the formation of e - T at 77°K and its lack of effect on the thermal bleaching of e - T suggests that the reaction e - + FeCl 3 → FeCl 2 + Cl - only occurs before the electron is thermalized.

Investigation of the Kinetics of Sulfite Oxidation on by-Production Recovery Process in WFGD

2012 ◽  
Vol 610-613 ◽  
pp. 1980-1985 ◽  
Author(s):  
Hong Jian Xu ◽  
Shu Fang Wang ◽  
Wei Guo Pan ◽  
Rui Tang Guo
Keyword(s):  
Chemical Reaction ◽  
Oxidation Kinetics ◽  
Reaction Rate ◽  
Recovery Process ◽  
Orthogonal Test ◽  
Sulfite Oxidation ◽  
Air Ventilation ◽  
Kinetics Of

The limestone-lime washing technology is the most widely used WFGD process, which normally we adopt to control the discharge of SO2 caused by coal’s combustion. Through the research on the oxidation kinetics of sulfite in this paper, it is indicated that macroscopic chemical reaction which responses to rate of sulfite is 1/2. And the results of orthogonal test can be concluded that: to the extent influence of oxidization reaction rate, the influences of temperature is the most significant, and influences of stirred speed is nearly negligible. The optimized operation factors may be shown as that temperature is controlled at 40°C, air ventilation is at 88ml/min,pH is 4.5 and stir speed is 500 r/min.

Vacancy-Mediated Diffusion and Diffusion-Controlled Processes in Ordered Binary Intermetallics by Kinetic Monte Carlo Simulations

2021 ◽  
Vol 29 ◽  
pp. 95-115
Author(s):  
Rafal Kozubski ◽  
Graeme E. Murch ◽  
Irina V. Belova
Keyword(s):  
Monte Carlo ◽  
Kinetic Monte Carlo ◽  
Simulation Studies ◽  
Self Diffusion ◽  
Monte Carlo Techniques ◽  
Diffusion Controlled ◽  
Kinetic Monte Carlo Simulations ◽  
Kinetic Effects ◽  
Kinetics Of ◽  
And Diffusion

We review the results of our Monte Carlo simulation studies carried out within the past two decades in the area of atomic-migration-controlled phenomena in intermetallic compounds. The review aims at showing the high potential of Monte Carlo methods in modelling both the equilibrium states of the systems and the kinetics of the running processes. We focus on three particular problems: (i) the atomistic origin of the complexity of the ‘order-order’ relaxations in γ’-Ni3Al; (ii) surface-induced ordering phenomena in γ-FePt and (iii) ‘order—order’ kinetics and self-diffusion in the ‘triple-defect’ β-NiAl. The latter investigation demonstrated how diverse Monte Carlo techniques may be used to model the phenomena where equilibrium thermodynamics interplays and competes with kinetic effects.

Effect of Excess PbO on the Kinetics of the Growth of PMNT Polycrystals by Templated Grain Growth Method

2005 ◽  
Vol 475-479 ◽  
pp. 1137-1140
Author(s):  
Lili Zhao ◽  
Feng Gao ◽  
Wei Min Wang ◽  
Chang Sheng Tian
Keyword(s):  
Grain Growth ◽  
Templated Grain Growth ◽  
Experimental Conditions ◽  
Precipitation Mechanism ◽  
Oriented Structure ◽  
Diffusion Controlled ◽  
The Matrix ◽  
Growth Method ◽  
Final Composition ◽  
Kinetics Of

The oriented 0.67Pb (Mg1/3Nb2/3)O3-0.33PbTiO3 (PMNT) polycrystals were prepared by the conventional ceramic technique and the templated grain growth method adding excess PbO in the matrix. Kinetics of the development of oriented structure was investigated systemically. In the presence of PbO liquid phase, the oriented PMNT polycrystals mainly grow by the dissolution-precipitation mechanism. The diffusion is determined by the sintering temperature and the PbO-excess content in the matrix. The thickness of oriented PMNT polycrystals displays a t1/3 dependence, which is characteristic of diffusion-controlled growth. For the thicker oriented structure, 20% excess PbO in the PMNT matrix and 1150oC for 10h are the proper experimental conditions. Moreover, the addition of PbO in the matrix hardly affects the final composition of ceramic matrix.

omparisons of Silicide Formation by Rapid Thermal Annealing and Conventional Furnace Annealing

1987 ◽  
Vol 92 ◽  
Author(s):  
E. Ma ◽  
M. Natan ◽  
B.S. Lim ◽  
M-A. Nicolet
Keyword(s):  
Thermal Annealing ◽  
Rapid Thermal Annealing ◽  
Silicide Formation ◽  
X Ray Diffraction ◽  
Furnace Annealing ◽  
Cross Sectional ◽  
Conventional Furnace ◽  
Diffusion Controlled ◽  
Conventional Furnace Annealing ◽  
Kinetics Of

ABSTRACTSilicide formation induced by rapid thermal annealing (RTA) and conventional furnace annealing (CFA) in bilayers of sequentially deposited films of amorphous silicon and polycrystalline Co or Ni is studied with RBS, X-ray diffraction and TEM. Particular attention is paid to the reliability of the RTA temperature measurements in the study of the growth kinetics of the first interfacial compound, Co2Si and Ni2Si, for both RTA and CFA. It is found that the same diffusion-controlled kinetics applies for the silicide formation by RTA in argon and CFA in vacuum with a common activation energy of 2.1+0.2eV for Co2Si and 1.3+0.2eV for Ni Si. Co and Ni atoms are the dominant diffusing species; during silicide formation by both RTA and CFA. The microstructures of the Ni-silicide formed by the two annealing techniques, however, differs considerably from each other, as revealed by cross-sectional TEM studies.

Sign in / Sign up

Export Citation Format

Share Document