Effect of Grain Boundary Segregated Dopant on Phase Stability in Tetragonal Zirconia Polycrystal

2010 ◽  
Vol 654-656 ◽  
pp. 2208-2211
Author(s):  
Yorinobu Takigawa ◽  
Takahisa Yamamoto ◽  
Kenji Higashi
Keyword(s):  
Grain Size ◽  
Phase Transformation ◽  
Grain Boundary ◽  
Phase Stability ◽  
Boundary Diffusion ◽  
Tetragonal Zirconia ◽  
Transformation Behavior ◽  
Hydroxyl Ion ◽  
Boundary Stress ◽  
Tetragonal Zirconia Polycrystal

The effect of grain boundary segregated dopant on phase stability of tetragonal zirconia polycrystal (TZP) is examined by accelerated exposure tests ageing in hot water. The materials used in this study are 3 mol%Y2O3 stabilized TZP (3Y-TZP) and 0.1mol%SiO2-doped 3Y-TZP. Accelerated exposure tests in an autoclave reveal that the tetragonal phase stability of 3Y-TZP in water is highly affected by the grain boundary segregated dopant and the grain size. When the grain size of TZP is about 0.55μm, the change in phase transformation behavior with dopant is explained from the change in grain boundary diffusivity of hydroxyl ion. Grain boundary diffusion of hydroxyl ion must be blocked by the presence of some segregated ion which reduces the effective area of grain boundary diffusion. On the other hand, when the grain size is about 0.35μm, the phase transformation behavior seems to be controlled by the grain boundary stress. Decreased grain boundary stress by the segregation of some dopant must enhance the phase transformation of 3Y-TZP.

Transformation behavior of yttria stabilized tetragonal zirconia polycrystal–TiB2 composites

2001 ◽  
Vol 16 (7) ◽  
pp. 2158-2169 ◽  
Author(s):  
B. Basu ◽  
J. Vleugels ◽  
O. Van Der Biest
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
Low Temperature ◽  
Tetragonal Zirconia ◽  
Mechanical Analysis ◽  
Transformation Behavior ◽  
Thermal Expansion Data ◽  
Thermally Induced ◽  
First Time ◽  
Tetragonal Zirconia Polycrystal

The objective of the present article is to study the influence of TiB2 addition on the transformation behavior of yttria stabilized tetragonal zirconia polycrystals (Y-TZP). A range of TZP(Y)–TiB2 composites with different zirconia starting powder grades and TiB2 phase contents (up to 50 vol%) were processed by the hot-pressing route. Thermal expansion data, as obtained by thermo-mechanical analysis were used to assess the ZrO2 phase transformation in the composites. The thermal expansion hysteresis of the transformable ceramics provides information concerning the transformation behavior in the temperature range of the martensitic transformation and the low-temperature degradation. Furthermore, the transformation behavior and susceptibility to low-temperature degradation during thermal cycling were characterized in terms of the overall amount and distribution of the yttria stabilizer, zirconia grain size, possible dissolution of TiB2 phase, and the amount of residual stress generated in the Y-TZP matrix due to the addition of titanium diboride particles. For the first time, it is demonstrated in the present work that the thermally induced phase transformation of tetragonal zirconia in the Y-TZP composites can be controlled by the intentional addition of the monoclinic zirconia particles into the 3Y-TZP matrix.

Grain-Boundary Structure and Phase-Transformation Mechanism in Yttria-Stabilized Tetragonal Zirconia Polycrystal

2007 ◽  
Vol 558-559 ◽  
pp. 921-926
Author(s):  
Koji Matsui ◽  
Hidehiro Yoshida ◽  
Yuichi Ikuhara
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Phase Transformation ◽  
Grain Boundary ◽  
Grain Growth ◽  
Tetragonal Zirconia ◽  
Cubic Phase ◽  
Phase Boundaries ◽  
Transmission Electron ◽  
Tetragonal Zirconia Polycrystal

The microstructures in 3 mol% Y2O3-stabilized tetragonal zirconia polycrystal (Y-TZP) sintered at 1100°-1650°C were investigated to clarify cubic-formation and grain-growth mechanisms. The cubic phase in Y-TZP appeared at 1300°C and its mass fraction increased with increasing sintering temperature. High-resolution transmission electron microscopy (HRTEM) and nanoprobe X-ray energy dispersive spectroscopy (EDS) measurements revealed that no amorphous layer existed along the grain-boundary faces in Y-TZP, and Y3+ ions segregated not only along the tetragonal-tetragonal phase boundaries but also along tetragonal-cubic phase boundaries. Scanning transmission electron microscopy (STEM) and nanoprobe EDS measurements revealed that the Y3+ ion distribution was nearly homogeneous up to 1300°C, but cubic phase regions with high Y3+ ion concentration clearly formed inside grains at 1500°C. These results indicate that cubic phase regions are formed from the grain boundaries and/or the multiple junctions in which Y3+ ions segregated. We termed such a new diffusive transformation phenomenon “grain boundary segregation-induced phase transformation (GBSIPT)”. The grain-growth mechanism is controlled by the solute-drag effect of Y3+ ions segregating along the grain boundary.

Effect of Second Phase Particles on Phase Stability of Zirconia in Hot Water

2007 ◽  
Vol 26-28 ◽  
pp. 781-784 ◽  
Author(s):  
T. Shibano ◽  
Yorinobu Takigawa ◽  
Tokuteru Uesugi ◽  
Kenji Higashi
Keyword(s):  
Phase Transformation ◽  
Phase Stability ◽  
Tetragonal Zirconia ◽  
Hot Water ◽  
Dominant Factor ◽  
Second Phase ◽  
Second Phase Particles ◽  
M Phase ◽  
Tetragonal Zirconia Polycrystal

The effect of second phase particles on tetragonal to monoclinic (t-m) phase transformation of zirconia is examined, which causes the degradation of zirconia in vivo. Silica is selected as the second phase particles and dispersed 0.1 to 10mol% into 3mol% yttria stabilized tetragonal zirconia polycrystal (3Y-TZP). As the result, phase transformation is promoted in all the samples examined in comparison with 3Y-TZP. Non-dispersed specimen exhibits better phase stability than that in silica doped one. Since the thermal expansion coefficient is smaller in order of silica and zirconia, the residual stresses induced during cooling from the sintering temperature must be the dominant factor to determine the phase stability in these materials.

EFFECT OF GRAIN SIZE ON THE ELECTRON WORK FUNCTION OF Cu AND Al

2004 ◽  
Vol 11 (02) ◽  
pp. 173-178 ◽  
Author(s):  
WEN LI ◽  
D. Y. LI
Keyword(s):  
Grain Size ◽  
Phase Transformation ◽  
Grain Boundary ◽  
Work Function ◽  
Electron Work Function ◽  
Deformation Texture ◽  
Kelvin Probe ◽  
Surface Conditions ◽  
The Mean ◽  
Sophisticated Instrument

The Kelvin probe is a sophisticated instrument which is very sensitive to changes in surface conditions, such as deformation, texture, phase transformation and contamination. Efforts have been made to use this technique to diagnose wear. In this study, the effect of the grain boundary (GB) on the electron work function (EWF) was examined with the aim of investigating the contribution of changes in grain size to total changes in the EWF during wear. Copper and aluminum were studied as examples. It was demonstrated that the EWF dropped in the vicinity of GB's and the mean EWF decreased as the grain size decreased. The mechanism responsible for the changes in the EWF with respect to the GB is discussed.

Effect of Cation Dopant on Phase Stability of Zirconia Bioceramics in Hot Water

2006 ◽  
Vol 49 ◽  
pp. 97-102 ◽  
Author(s):  
Yorinobu Takigawa ◽  
Yukihisa Naka ◽  
Kenji Higashi
Keyword(s):  
Phase Transformation ◽  
Phase Stability ◽  
Ionic Radius ◽  
Hot Water ◽  
Yttria Stabilized Zirconia ◽  
Transformation Behavior ◽  
Stabilized Zirconia

The effect of cation ion dopant on phase transformation of zirconia bioceramics is evaluated by ageing in hot water. The phase transformation progresses with time in all specimens. However, the transformation behavior is much different depending on the dopant. The transformation is promoted when the 1 mol% of pentavalent element is added to 3mol% yttria stabilized zirconia (3Y-TZP). In contrast, the transformation is suppressed when the bivalent element is added. In case that the tetravalent element is added, the transformation is promoted if the ionic radius of the element is larger than that of zirconium, and the transformation is suppressed if the element with smaller ionic radius than zirconium ion is added. This result indicates that the ionic radius and the valency of ions are important factors to control the phase stability in zirconia.

scholarly journals Study of the Fracture Behavior of Tetragonal Zirconia Polycrystal with a Modified Phase Field Model

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4430 ◽  
Author(s):  
Jingming Zhu ◽  
Jun Luo ◽  
Yuanzun Sun
Keyword(s):  
Phase Transformation ◽  
Crack Propagation ◽  
Phase Field ◽  
Fracture Behavior ◽  
Tetragonal Zirconia ◽  
Finite Size ◽  
Phase Field Model ◽  
Crack Tip ◽  
Propagation Mode ◽  
Tetragonal Zirconia Polycrystal

The superior fracture toughness of zirconia is closely correlated with stress-induced martensitic phase transformation around a crack tip. In this study, a modified phase field (PF) model coupling phase transformation and fracture is proposed to study the fracture behavior and toughening effect of tetragonal zirconia polycrystal (TZP). The stress-induced tetragonal to monoclinic (t–m) phase transformation around a static or propagating crack is characterized with PF simulations. It is shown that the finite size and shape of the transformation zone under different loads and ambient temperatures can be well predicted with the proposed PF model. The phase transformation may decrease the stress level around the crack tip, which implies the toughening effect. After that, crack propagation in TZP is studied. As the stress field is perturbed by the phase transformation patterns, the crack may experience deflection and branching in the propagation process. It is found that the toughness of the grain boundaries (GBs) has important influences on the crack propagation mode. For TZP with strong GBs, the crack is more likely to propagate transgranularly while, for TZP with weak GBs, intergranular crack propagation is prevalent. Besides that, the crystal orientation and the external load can also influence the topology of crack propagation.

scholarly journals Molecular Dynamics Simulation on Creep Behavior of Nanocrystalline TiAl Alloy

Nanomaterials ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1693
Author(s):  
Fei Zhao ◽  
Jie Zhang ◽  
Chenwei He ◽  
Yong Zhang ◽  
Xiaolei Gao ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Grain Size ◽  
Steady State ◽  
High Temperature ◽  
Grain Boundary ◽  
Tial Alloy ◽  
Boundary Diffusion ◽  
Dislocation Motion ◽  
High Temperature Creep ◽  
Creep Stage

TiAl alloy represents a new class of light and heat-resistant materials. In this study, the effect of temperature, pressure, and grain size on the high-temperature creep properties of nanocrystalline TiAl alloy have been studied through the molecular dynamics method. Based on this, the deformation mechanism of the different creep stages, including crystal structure, dislocation, and diffusion, has been explored. It is observed that the high-temperature creep performance of nanocrystalline TiAl alloy is significantly affected by temperature and stress. The higher is the temperature and stress, the greater the TiAl alloy’s steady-state creep rate and the faster the rapid creep stage. Smaller grain size accelerates the creep process due to the large volume fraction of the grain boundary. In the steady-state deformation stage, two kinds of creep mechanisms are manly noted, i.e., dislocation motion and grain boundary diffusion. At the same temperature, the creep mechanism is dominated by the dislocation motion in a high-stress field, and the creep mechanism is dominated by the diffusion creep in the low-stress field. However, it is observed to be mainly controlled by the grain boundary diffusion and lattice diffusion in the rapid creep stage.

Sign in / Sign up

Export Citation Format

Share Document