Removal of Cadmium and Zinc Contaminations in Landfill Leachate by Using Electrocoagulation Process

2016 ◽  
Vol 857 ◽  
pp. 519-523 ◽  
Author(s):  
Mohamad Fared Murshed ◽  
Mohd Khairul Nizam Mahmad ◽  
M.A.Z. Mohd Remy Rozainy ◽  
Ismail Abustan ◽  
Norlia Baharun
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Stainless Steel ◽  
Electrolyte Solution ◽  
Landfill Leachate ◽  
Metal Removal ◽  
Stainless Steel Electrode ◽  
Steel Electrode ◽  
Initial Ph ◽  
Electrocoagulation Process

The research works involve the study of removal of cadmium and zinc contaminations in landfill leachate by electrocoagulation process. This project focused on leachate landfill from Pulau Burung, Nibong Tebal, Penang as an electrolyte solution. Heavy metals are the main factor contributing to pollution in leachate landfill. Types of electrodes used in this study were aluminium (grade 5052) and Stainless Steel (grade 316). The ranges of initial pH applied were pH (3, 4, 5, 6 and 7) and voltages applied were 1.5V, 2.0V and 2.5V. At the end of electrocoagulation process, the solutions were stored and analysed usingatomic absorption spectroscopy (AAS) to determine the final concentration of electrolyte solution. It was found difference electrodes have difference effectiveness in removing heavy metals, relies on the types of electrodes (aluminium or stainless steel) and also types of heavy metals that were being treated. The initial pH also gives the significant effect to removal of heavy metal and the maximum voltages give higher removal of heavy metal. Removal of cadmium and zinc by stainless steel electrode was more effective than aluminium electrodes at voltage of 2.5V. The removal using stainless steel was 22.45% and 97.54% respectively. For removal using aluminium electrodes 18.37% and 92.12% respectively. It was found that the maximum voltages give higher removal of heavy metal for all removal of cadmium and zinc. The removal maximum when the applied voltage was 2.5V and minimum at 1.5V.

scholarly journals Electrocoagulation Treatment for Landfill Leachate using Stainless Steel Electrode

2019 ◽  
Vol 9 (1) ◽  
pp. 2851-2855
Keyword(s):  
Stainless Steel ◽  
Landfill Leachate ◽  
Applied Voltage ◽  
Metal Ion ◽  
Oxygen Demand ◽  
Stainless Steel Electrode ◽  
Electrolysis Time ◽  
Steel Electrode ◽  
Electrode Distance ◽  
Wide Range

Electrocoagulation (EC) process uses direct electric current source between metal electrode submerged in the effluent that results in electrode dissolution, with a suitable pH, metal ion can form a wide range of metal hydroxide and coagulated species that destabilized and dissolved contaminants absorbed. Electrocoagulation (EC) has been working for the percentage removal of BOD (Biochemical oxygen demand)/ chemical oxygen demand (COD) ratio, Color and COD on leachate in a batch Electrocoagulation reactor using stainless steel (SS) electrode. EC technology depends on so many factors such as electrode material, initial pH, applied voltage, inter-electrode distance, and electrolysis time. From the experimental work, results reveal that the maximum percentage of removal achieved were COD and Color 73.5% and 65.0% respectively and increasing BOD/COD ratio 0.11 to 0.62. The optimum inter-electrode distance 1cm with electrode surface area 35 cm2 and optimum electrolysis time of 120 min at optimum applied voltage 12V, stirring speed 250 rpm and pH 9.8. These results proved that the EC process is an appropriate and proficient approach for treating the landfill leachate.

Removal of Iron and Total Chromium Contaminations in Landfill Leachate by Using Electrocoagulation Process

2015 ◽  
Vol 660 ◽  
pp. 279-283 ◽  
Author(s):  
Mohd Khairul Nizam Mahmad ◽  
M.A.Z. Mohd Remy Rozainy ◽  
Ismail Abustan ◽  
Norlia Baharun
Keyword(s):  
Heavy Metals ◽  
Electrolyte Solution ◽  
Research Work ◽  
Operation Time ◽  
Final Concentration ◽  
Steel Grade ◽  
Total Chromium ◽  
Initial Ph ◽  
Electrocoagulation Process ◽  
Main Factor

This research work involves the study removal of Iron and Total Chromium by electrocoagulation process. This project focused on leachate landfill from Pulau Burung, Nibong Tebal, Penang as an electrolyte solution. These heavy metals are the main factor contributing to pollution in leachate landfill. Types of electrodes used in this study were Aluminium (grade 5052) and Stainless Steel (grade 316). The ranges of initial pH applied were pH (3, 4, 5, 6 and 7) and voltages applied were 1.5V, 2.0V and 2.5V. These three parameters were evaluated and the operation time was 60 minutes. At the end of electrocoagulation process, the solutions were stored and analysed using AAS to determine the final concentration of electrolyte solution.

Heavy metal removal from wastewater using zero-valent iron nanoparticles

2008 ◽  
Vol 58 (10) ◽  
pp. 1947-1954 ◽  
Author(s):  
S. Y. Chen ◽  
W. H. Chen ◽  
C. J. Shih
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Removal Efficiency ◽  
Metal Removal ◽  
Heavy Metal Removal ◽  
Zero Valent Iron ◽  
Affecting Factors ◽  
High Concentration ◽  
Initial Ph ◽  
Low Efficiency

Because of having a high reduction potential, the zero-valent iron (ZVI) is often applied for the remediation of wastewater or groundwater with heavy metals. The purpose of this study was aimed to investigate the reaction behavior of heavy metals with ZVI nanoparticles in the wastewater. The affecting factors, such as initial pH, dosage of nanoscale ZVI and initial concentration of heavy metal, on the removal efficiency of heavy metals by ZVI in the wastewater were examined by the batch experiments in this study. It was found that the removal of heavy metals was affected by initial pH. The rate and efficiency of metal removal increased with decreasing initial pH. Greater than 90% of the heavy metals were removed when the initial pH was controlled at 2. In addition, the rate and efficiency of metal removal increased as the dosage of nanoscale ZVI increased. The removal efficiency of heavy metal was higher than 80% when 2.0 g/L of ZVI was added in the wastewater. On the other hand, the slow rate and low efficiency of metal removal from the wastewater treated by nanoscale ZVI was found in the wastewater with high concentration of heavy metal.

scholarly journals Resistance of bacteria isolated from leachate to heavy metals and the removal of Hg by Pseudomonas aeruginosa strain FZ-2 at different salinity levels in a batch biosorption system

2021 ◽  
Vol 31 (1) ◽  
Author(s):  
Muhammad Fauzul Imron ◽  
Setyo Budi Kurniawan ◽  
Siti Rozaimah Sheikh Abdullah
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Pseudomonas Aeruginosa ◽  
Fresh Water ◽  
Landfill Leachate ◽  
Saline Water ◽  
Resistant Bacteria ◽  
Sanitary Landfill ◽  
Salinity Levels ◽  
Sanitary Landfill Leachate

AbstractLeachate is produced from sanitary landfills containing various pollutants, including heavy metals. This study aimed to determine the resistance of bacteria isolated from non-active sanitary landfill leachate to various heavy metals and the effect of salinity levels on the removal of Hg by the isolated bacterium. Four dominant bacteria from approximately 33 × 1017 colony-forming units per mL identified as Vibrio damsela, Pseudomonas aeruginosa, Pseudomonas stutzeri, and Pseudomonas fluorescens were isolated from non-active sanitary landfill leachate. Heavy metal resistance test was conducted for Hg, Cd, Pb, Mg, Zn, Fe, Mn, and Cu (0–20 mg L− 1). The removal of the most toxic heavy metals by the most resistant bacteria was also determined at different salinity levels, i.e., fresh water (0‰), marginal water (10‰), brackish water (20‰), and saline water (30‰). Results showed that the growth of these bacteria is promoted by Fe, Mn, and Cu, but inhibited by Hg, Cd, Pb, Mg, and Zn. The minimum inhibitory concentration (MIC) of all the bacteria in Fe, Mn, and Cu was > 20 mg L− 1. The MIC of V. damsela was 5 mg L− 1 for Hg and >  20 mg L− 1 for Cd, Pb, Mg, and Zn. For P. aeruginosa, MIC was > 20 mg L− 1 for Cd, Pb, Mg, and Zn and 10 mg L− 1 for Hg. Meanwhile, the MIC of P. stutzeri was > 20 mg L− 1 for Pb, Mg, and Zn and 5 mg L− 1 for Hg and Cd. The MIC of P. fluorescens for Hg, Pb, Mg, and Zn was 5, 5, 15, and 20 mg L− 1, respectively, and that for Cd was > 20 mg L− 1. From the MIC results, Hg is the most toxic heavy metal. In marginal water (10‰), P. aeruginosa FZ-2 removed up to 99.7% Hg compared with that in fresh water (0‰), where it removed only 54% for 72 h. Hence, P. aeruginosa FZ-2 is the most resistant to heavy metals, and saline condition exerts a positive effect on bacteria in removing Hg.

Heavy Metal Removal by Oil Palm Empty Fruit Bunches (OPEFB) Biosorbent

2014 ◽  
Vol 625 ◽  
pp. 889-892 ◽  
Author(s):  
Safoura Daneshfozoun ◽  
Bawadi Abdullah ◽  
Mohd Azmuddin Abdullah
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Metal Removal ◽  
Low Cost ◽  
Ph Dependence ◽  
Heavy Metal Removal ◽  
Absorption Spectrometry ◽  
Adsorption Efficiency ◽  
Empty Fruit Bunches ◽  
Initial Ph

This study developed an effective and economical physical pretreatment of OPEFB to be used as biosorbent for the removal of heavy metal ions such as Cu+2, Zn+2and Pb2+. The effects of fibres sizes, metal ions concentration (100-1000 ppm), initial pH (4-10) and contact time (20-150 min) were investigated in batch system. Samples were characterized with Atomic Absorption Spectrometry (AAS), Transmission Electron Microscopy (TEM) and Fourier Transmission Infra-red Spectroscopy (FTIR). Results showed pH-dependence adsorption efficiency and increased adsorption with initial metal concentrations where more than 92% adsorption efficiency achieved. We have successfully developed an eco-friendly, low cost adsorbent without any chemical modification or excessive energy disposal.

A Review on Current Development of Animal Bone-Based Sorbent for Heavy Metals Removal from Contaminated Water and Wastewater

2021 ◽  
Vol 897 ◽  
pp. 109-115
Author(s):  
Sri Martini ◽  
Kiagus Ahmad Roni ◽  
Dian Kharismadewi ◽  
Erna Yuliwaty
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Removal ◽  
Inorganic Compounds ◽  
Heavy Metal Removal ◽  
Influential Factors ◽  
Contaminated Water ◽  
Animal Bone ◽  
Water And Wastewater ◽  
Cow Bone

This review article presents the usage of various animal bones such as chicken bone, fish bone, pig bone, camel bone, and cow bone as reliable biosorbent materials to remove heavy metals contained in contaminated water and wastewater. The sources and toxicity effects of heavy metal ions are also discussed properly. Then specific insights related to adsorption process and its influential factors along with the proven potentiality of selected biosorbents especially derived from animal bone are also explained. As the biosorbents are rich in particular organic and inorganic compounds and functional groups in nature, they play an important role in heavy metal removal from contaminated solutions. Overall, after conducting study reports on the literature, a brief conclusion can be drawn that animal bone waste has satisfactory efficacy as effective, efficient, and environmentally friendly sorbent material.

Determination of Concentrated Hydrogen Peroxide Free from Oxygen Interference at Stainless Steel Electrode

2018 ◽  
Vol 90 (14) ◽  
pp. 8680-8685 ◽  
Author(s):  
Shimeles Addisu Kitte ◽  
Muhammad Nadeem Zafar ◽  
Yuriy T. Zholudov ◽  
Xiangui Ma ◽  
Anaclet Nsabimana ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Stainless Steel ◽  
Stainless Steel Electrode ◽  
Steel Electrode
Sign in / Sign up

Export Citation Format

Share Document