scholarly journals Atomic Force Microscopy and Scanning Tunneling Microscopy of Aluminum Nanoislands

Nano Hybrids ◽  
2012 ◽  
Vol 2 ◽  
pp. 13-24 ◽  
Author(s):  
S.G. Nedilko ◽  
V. Prorok ◽  
Stanislav Rozouvan

Aluminum nanoislands deposited on silicon substrate were studied by a scanning tunnelling microscopy technique. Measurements completed with spatial resolution up to 1 nm revealed a complex nanoisland structure-rhomboidally ordered near the border of the aluminum-silicon and porous structure in the islands upper parts. Volt-ampere curves demonstrated strong dependency from the film thickness and were interpreted as nanoscale effects. Kelvin probe microscopy was used for simultaneous aluminum-alumina and alumina-air surface scanning.

2018 ◽  
Vol 60 (2) ◽  
pp. 255
Author(s):  
А.Е. Почтенный ◽  
А.Н. Лаппо ◽  
И.П. Ильюшонок

AbstractSome results of studying the direct-current (DC) conductivity of perylenetetracarboxylic acid dimethylimide films by cyclic oxygen thermal desorption are presented. The microscopic parameters of hopping electron transport over localized impurity and intrinsic states were determined. The bandgap width and the sign of major current carriers were determined by scanning probe microscopy methods (atomic force microscopy, scanning probe spectroscopy, and photoassisted Kelvin probe force microscopy). The possibility of the application of photoassisted scanning tunneling microscopy for the nanoscale phase analysis of photoconductive films is discussed.


Author(s):  
CE Bracker ◽  
P. K. Hansma

A new family of scanning probe microscopes has emerged that is opening new horizons for investigating the fine structure of matter. The earliest and best known of these instruments is the scanning tunneling microscope (STM). First published in 1982, the STM earned the 1986 Nobel Prize in Physics for two of its inventors, G. Binnig and H. Rohrer. They shared the prize with E. Ruska for his work that had led to the development of the transmission electron microscope half a century earlier. It seems appropriate that the award embodied this particular blend of the old and the new because it demonstrated to the world a long overdue respect for the enormous contributions electron microscopy has made to the understanding of matter, and at the same time it signalled the dawn of a new age in microscopy. What we are seeing is a revolution in microscopy and a redefinition of the concept of a microscope.Several kinds of scanning probe microscopes now exist, and the number is increasing. What they share in common is a small probe that is scanned over the surface of a specimen and measures a physical property on a very small scale, at or near the surface. Scanning probes can measure temperature, magnetic fields, tunneling currents, voltage, force, and ion currents, among others.


2021 ◽  
Vol 03 (02) ◽  
pp. 128-133
Author(s):  
Zijie Qiu ◽  
Qiang Sun ◽  
Shiyong Wang ◽  
Gabriela Borin Barin ◽  
Bastian Dumslaff ◽  
...  

Intramolecular methyl–methyl coupling on Au (111) is explored as a new on-surface protocol for edge extension in graphene nanoribbons (GNRs). Characterized by high-resolution scanning tunneling microscopy, noncontact atomic force microscopy, and Raman spectroscopy, the methyl–methyl coupling is proven to indeed proceed at the armchair edges of the GNRs, forming six-membered rings with sp3- or sp2-hybridized carbons.


COSMOS ◽  
2007 ◽  
Vol 03 (01) ◽  
pp. 1-21 ◽  
Author(s):  
XIAN NING XIE ◽  
HONG JING CHUNG ◽  
ANDREW THYE SHEN WEE

Nanotechnology is vital to the fabrication of integrated circuits, memory devices, display units, biochips and biosensors. Scanning probe microscope (SPM) has emerged to be a unique tool for materials structuring and patterning with atomic and molecular resolution. SPM includes scanning tunneling microscopy (STM) and atomic force microscopy (AFM). In this chapter, we selectively discuss the atomic and molecular manipulation capabilities of STM nanolithography. As for AFM nanolithography, we focus on those nanopatterning techniques involving water and/or air when operated in ambient. The typical methods, mechanisms and applications of selected SPM nanolithographic techniques in nanoscale structuring and fabrication are reviewed.


Author(s):  
Bai An ◽  
Takashi Iijima ◽  
Chris San Marchi ◽  
Brian Somerday

Understanding the micromechanisms of hydrogen-assisted fracture in multiphase metals is of great scientific and engineering importance. By using a combination of scanning electron microscopy (SEM), scanning tunneling microscopy (STM), atomic force microscopy (AFM) and magnetic force microscopy (MFM), the micromorphology of fracture surface and microcrack formation in hydrogen-precharged super duplex stainless steel 2507 are characterized from microscale to nanoscale. The results reveal that the fracture surfaces consist of quasi-brittle facets with riverlike patterns at the microscale, which exhibit rough irregular patterns or remarkable quasi-periodic corrugation patterns at the nanoscale that can be correlated with highly localized plastic deformation. The microcracks preferentially initiate and propagate in ferrite phase and are stopped or deflected by the boundaries of the austenite phase. The hydrogen-assisted cracking mechanisms in super duplex stainless steel are discussed according to the experimental results and hydrogen-enhanced localized plasticity theory.


2021 ◽  
Author(s):  
Oliver Mullins ◽  
Andrew Pomerantz ◽  
Yunlong Zhang

Abstract The sophisticated molecular imaging methods, atomic force microscopy (AFM) and scanning tunneling microscopy (STM), have been utilized to image individual asphaltene molecules, both their atoms and bonds, and their electronic structure. The stunning images have confirmed previous results and have all but resolved the long-standing uncertainties regarding asphaltene molecular architecture. Asphaltenes are also known to have a strong propensity to aggregate. The dominante asphaltene molecular structure and hierarchical nanocolloidal structures have been resolved and codified in the Yen-Mullins model. Use of this model in a simple polymer solution theory has given the first equation of state (EoS) for asphaltene gradients in oilfield reservoirs, the Flory-Huggins-Zuo EoS. With this EoS it is now possible to address reservoir connectivity in new ways; equilibrated asphaltenes imply reservoir connectivity. For reservoirs with disequilibrium of contained fluids, there is often a fluid process occurring in geologic time that precludes equilibrium. The collection of processes leading to equilibrium and those that preclude equilibrium constitute a new technical discipline, reservoir fluid geodynamics (RFG). Several reservoirs are reviewed employing RFG evaluation of connectivity via asphaltene thermodynamics. RFG processes in reservoris often include diffusion, RFG models incorporating simple solution to the diffusion equation coupled with quasi-equilibrium with the FHZ EoS are shown to apply for timelines up to 50 million years, the age of charge in a reservoir. When gas (or condensates) diffuse into oil, the asphaltenes are destabilized and can convect to the base of the reservoir. Increasing asphaltene onset pressure as well as viscous oil and tar mats can be consequences. Depending on specifics of the process, either gooey tar or coal-like asphaltene deposits can form. In addition, the asphaltene structures illuminated by AFM are now being used to account for interfacial properties using simple thermodynamics. At long last, asphaltenes are no longer the enigmatic component of crude oil, instead the resolution of asphaltene structures and dynamics has led to new thermodynamic applications in reservoirs, the new discipline RFG, and a new understanding of tar mats.


2015 ◽  
Vol 1754 ◽  
pp. 69-74
Author(s):  
Ravi Gaikwad ◽  
Tinu Abraham ◽  
Aharnish Hande ◽  
Fatemeh Bakhtiari ◽  
Siddhartha Das ◽  
...  

ABSTRACTAtomic force microscopy is employed to study the structural changes in the morphology and physical characteristics of asphaltene aggregates as a function of temperature. The exotic fractal structure obtained by evaporation-driven asphaltene aggregates shows an interesting dynamics for a large range of temperatures from 25°C to 80°C. The changes in the topography, surface potential and adhesion are unnoticeable until 70°C. However, a significant change in the dynamics and material properties is displayed in the range of 70°C - 80°C, during which the aspahltene aggregates acquire ‘liquid-like’ mobility and fuse together. This behaviour is attributed to the transition from the pure amorphous phase to a crystalline liquid phase which occurs at approximately 70°C as shown by using Differential Scanning Calorimetry (DSC). Additionally, the charged nature of asphaltenes and bitumen is also explored using kelvin probe microscopy. Such observations can lead to the development of a rational approach to the fundamental understanding of asphaltene aggregation dynamics and may help in devising novel techniques for the handling and separation of asphaltene aggregates using dielectrophoretic methods.


Sign in / Sign up

Export Citation Format

Share Document