Manipulation of Magnetic Properties and Domain Wall Dynamics of Amorphous Ferromagnetic Co68.7Fe4Ni1B13Si11Mo2.3 Microwire by Changing of Annealing Temperature

2015 ◽  
Vol 233-234 ◽  
pp. 269-272 ◽  
Author(s):  
Kseniay Chichay ◽  
Valeria Rodionova ◽  
Mihail Ipatov ◽  
Valentina Zhukova ◽  
Arkadi Zhukov
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Annealing Temperature ◽  
Word Processor ◽  
Web Page ◽  
Electronic Form ◽  
Domain Wall Dynamics ◽  
Paper Format

This template explains and demonstrates how to prepare your camera-ready paper forTrans Tech Publications. The best is to read these instructions and follow the outline of this text.Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in).We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct.Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

A Review on Thixoforming of High Melting Point Alloys

2016 ◽  
Vol 256 ◽  
pp. 228-236 ◽  
Author(s):  
Ahmed Rassili
Keyword(s):  
Melting Point ◽  
Word Processor ◽  
High Melting ◽  
Web Page ◽  
High Melting Point ◽  
Electronic Form ◽  
Paper Format

This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

Correlation Analysis of Target Lane’s Evaluation Data

2014 ◽  
Vol 678 ◽  
pp. 203-206
Author(s):  
Guang Wei Zhang ◽  
Xin Ting Zhang
Keyword(s):  
Correlation Analysis ◽  
Electronic Version ◽  
Poor Quality ◽  
Word Processor ◽  
Web Page ◽  
Evaluation Data ◽  
Electronic Form ◽  
Paper Format

This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). (We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. If not, we will have to scan your paper which, when compared with an electronic version, results in very poor quality).

Manipulation of Magnetic Properties and Domain Wall Dynamics in Amorphous Ferromagnetic Microwires by Annealing under Applied Stress

2014 ◽  
Vol 215 ◽  
pp. 432-436 ◽  
Author(s):  
Kseniay Chichay ◽  
Valeria Rodionova ◽  
Valentina Zhukova ◽  
Mihail Ipatov ◽  
Arcady Zhukov
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Hysteresis Loop ◽  
Applied Stress ◽  
Constant Sign ◽  
Domain Wall Dynamics ◽  
Magnetostriction Constant

The effect of annealing under applied stress on magnetic properties of Co-based or CoFeNi-based glass-coated microwires was studied. It was found that CoFeNi-based microwires became bistable after annealing because of changing of magnetostriction constant sign, while Co-based microwires keep S-shape of hysteresis loop. The domain wall dynamics of microwires which became bistable was also investigated and it was shown that microwires with acquired bistability are more suitable for applications.

Effect of the Peierls Relief Chirality on Domain Wall Dynamics in Molecular Ferrimagnet

2012 ◽  
Vol 190 ◽  
pp. 377-380
Author(s):  
F.B. Mushenok ◽  
O.V. Koplak ◽  
R.B. Morgunov ◽  
S.L. Chernyshova
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Low Frequency ◽  
Debye Relaxation ◽  
Domain Wall Dynamics ◽  
Relaxation Modes

In this paper the contributions of switching, slide, creep and Debye relaxation modes of the domain wall dynamics to the low-frequency magnetic properties of chiral and racemic [MnII(HL-pn)(H2O)][MnIII(CN)6]2H2O molecular ferrimagnets were distinguished.

Implementation of a Test Bed for Supercapacitor Testing and Evaluation

2016 ◽  
Vol 833 ◽  
pp. 126-134
Author(s):  
Anderson Ngap Chai Kho ◽  
Kama Sherab Khee Yong Si ◽  
Wei Hua Jun ◽  
Suh Cem Pang ◽  
Hong Siang Chua
Keyword(s):  
Series Resistance ◽  
Testing Procedure ◽  
Word Processor ◽  
Constant Current ◽  
Equivalent Series Resistance ◽  
Test Bed ◽  
Web Page ◽  
Different Types ◽  
Paper Format ◽  
Testing And Evaluation

Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in)This paper is based on a project is entitled “Implementation of a Test Bed for Supercapacitor Testing and Evaluation” that is intended to perform tests and evaluate the behavior and characteristics supercapacitors. The test bed can perform charging and discharging of different types of supercapacitors. This implementation serves to automatically acquire the data from the testing procedure and plot in real time the graphs for monitoring the charging and discharging behaviour. From there, the test bed can determine the two significant characteristics of the supercapacitor, which are the capacitance value in Farad and the equivalent series resistance (ESR) in Ohm. The capacitance value is obtained using the measurements taken during the discharging process while the ESR is determined by measurements taken when it is charged using a constant current. The test bed can select between different modes of charging depending of the type of supercapacitor put to test. It can measure and evaluate capacitance ranges from 0.1F to 10F. This paper will discuss the methodologies that the test bed implements for testing the supercapacitors, and the results obtained from evaluation of several types of supercapacitors. We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc. It is found the test bed can approximately read the values of supercapacitors that have low ESR ranges.

scholarly journals Engineering of magnetic properties and domain wall dynamics in Fe-Ni-based amorphous microwires by annealing

AIP Advances ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 015130 ◽  
Author(s):  
V. Zhukova ◽  
A. Talaat ◽  
P. Corte-Leon ◽  
J. M. Blanco ◽  
M. Ipatov ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Domain Wall Dynamics ◽  
Amorphous Microwires

Influence of Annealing Temperature on Magnetic Properties in Co-Based Amorphous Ribbons

2004 ◽  
Vol 449-452 ◽  
pp. 1049-1052
Author(s):  
Li Jin ◽  
Y.W. Rheem ◽  
Cheol Gi Kim ◽  
De Sheng Sun ◽  
Chong Oh Kim ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Exchange Bias ◽  
Wall Motion ◽  
Annealing Temperature ◽  
Domain Wall Motion ◽  
Bias Field ◽  
Crystalline Layer ◽  
Magnetization Rotation ◽  
Amorphous Ribbons

The magnetic properties were investigated on Co66Fe4B15Si15 amorphous ribbons of annealed at temperature range from 473 K to 773 K in vacuum (A-batch) and open air (B-batch). Static permeability from domain wall motion decreases with annealing temperature both in A- and B-batch sample. The permeability from magnetization rotation increases up to 700 K annealing temperature, but then decreases. The GMI profiles show a symmetric curve in A-batch samples irrespective of annealing temperature. In B-batch samples, symmetric profiles are shown up to 650 K annealing temperature, while they becomes asymmetric for further annealing temperature, due to the exchange bias-field induced by surface crystalline layer.

scholarly journals Correlation between magnetic properties and depinning field in field-driven domain wall dynamics in GdFeCo ferrimagnets

2018 ◽  
Vol 112 (17) ◽  
pp. 172403 ◽  
Author(s):  
Tomoe Nishimura ◽  
Duck-Ho Kim ◽  
Yuushou Hirata ◽  
Takaya Okuno ◽  
Yasuhiro Futakawa ◽  
...  
Keyword(s):  
Magnetic Properties ◽  
Domain Wall ◽  
Domain Wall Dynamics ◽  
Depinning Field

Integrated Analysis for Gearbox Fault Based on Autocorrelation and Spectrum Analysis

2011 ◽  
Vol 105-107 ◽  
pp. 751-754
Author(s):  
Shu Ting Wan ◽  
Cong Wang ◽  
Yu Zhang ◽  
Jing Zhang
Keyword(s):  
Fault Diagnosis ◽  
Word Processor ◽  
Integrated Analysis ◽  
Improved Method ◽  
Web Page ◽  
Vibration Data ◽  
Advantages And Disadvantages ◽  
Cepstrum Analysis ◽  
Diagnosis Method ◽  
Paper Format

The advantages and disadvantages of traditional gearbox fault diagnosis method based on autocorrelation, spectrum-zoom, Hilbert demodulation and cepstrum analysis are respectively analyzed. Then a gearbox fault diagnosis method is presented, which integrates autocorrelation, spectrum-zoom, Hilbert demodulation and cepstrum analysis. Finally, vibration data of the pitting gear is measured by using QPZZ-II rotating-machinery fault simulating system. The result shows that the improved method proposed in this paper is effective for the fault diagnosis of the pitting gear.This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications.. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

The Design of Automatic Smooth Layer System for the Construction Elevator Based on Fuzzy Control

2011 ◽  
Vol 103 ◽  
pp. 417-421
Author(s):  
Jun Jie Zhu ◽  
Lin Ma ◽  
Cheng Chen ◽  
Xu Feng
Keyword(s):  
High Speed ◽  
Weight Bearing ◽  
Word Processor ◽  
Test Results ◽  
Single Chip ◽  
Web Page ◽  
Single Chip Microcomputer ◽  
Layer System ◽  
Speed Sensor ◽  
Paper Format

This In the construction elevator with high-speed inverter based on the single-chip microcomputer and single speed sensor, the response of the automatic smooth layer system is often too slow to guarantee the accurate leveling lift, so the system needs frequent calibration. This paper presents a fuzzy algorithm based elevator automatic leveling system using STC controller. Test results show that, under the condition that the load vary frequently and hoist cage fall inertia, the system can predict elevator weight-bearing state or delay in advance to control the inverter.template explains and demonstrates how to prepare your camera-ready paper forTrans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

Sign in / Sign up

Export Citation Format

Share Document