The Suitability of Fly Ash for Use in Concrete According to EN 450 Based on their Particle Size

2018 ◽  
Vol 276 ◽  
pp. 110-115
Author(s):  
Martin Ťažký ◽  
Martin Labaj ◽  
Rudolf Hela
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Catalytic Reduction ◽  
Raw Materials ◽  
Thermal Power ◽  
Combustion Process ◽  
Thermal Power Plants ◽  
Mechanical Parameters ◽  
Fly Ashes ◽  
The Impact

The by-products of energy industry are nowadays often affected by new limits governing the production of harmful gases discharged into the air. These stricter and stricter criteria are often met by electricity producers by changing the combustion process in thermal power plants itself. Nowadays, the SNCR (selective non-catalytic reduction) application is quite common in the combustion process in order to help reduce the nitrogen oxide emission. This article deals with the primary measures of thermal power plants, which in particular consist of a modified treatment of raw materials (coal) entering the combustion process. These primary measures then often cause the formation of fly ash with unsuitable fineness for the use in concrete according to EN 450. The paper presents the comparison of the physico-mechanical parameters of several fly ashes with a different fineness values. The primary task is to assess the impact of non-suitable granulometry in terms of EN 450 on the other physico-mechanical parameters of fly ashes sampled within the same thermal power plant. Several fly ashes produced in the Czech Republic and surrounding countries were evaluated in this way.

scholarly journals Composition and Morphology Characteristics of Magnetic Fractions of Coal Fly Ash Wastes Processed in High-Temperature Exposure in Thermal Power Plants

2019 ◽  
Vol 9 (9) ◽  
pp. 1964 ◽  
Author(s):  
Dinh-Hieu Vu ◽  
Hoang-Bac Bui ◽  
Bahareh Kalantar ◽  
Xuan-Nam Bui ◽  
Dinh-An Nguyen ◽  
...  
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Combustion Process ◽  
Mineralogical Composition ◽  
Striking Difference ◽  
Thermal Power Plants ◽  
Power Stations ◽  
Magnetic Components

Coal-fired power stations are one of the primary sources of power generation in the world. This will produce considerable amounts of fly ash from these power stations each year. To highlight the potential environmental hazards of these materials, this study is carried out to evaluate the characterization of fly ashes produced in thermal power plants in northern Vietnam. Fly ash was firstly fractionated according to size, and the fractions were characterized. Then, each of these fractions was analyzed with regard to their mineralogical features, morphological and physicochemical properties. The analytical results indicate a striking difference in terms of the characteristics of particles. It was found that magnetic fractions are composed of magnetite hematite and, to a lower rate, mullite, and quartz. Chemical analyses indicate that the non-magnetic components mainly consist of quartz and mullite as their primary mineral phases. As the main conclusion of this research, it is found that the magnetic and non-magnetic components differ in terms of shape, carbon content and mineralogical composition. In addition, it was found that magnetic components can be characterized as more spheroidal components compared to non-magnetic ones. This comprehensive characterization not only offers a certain guideline regarding the uses of different ash fractions but it will also provide valuable information on this common combustion process.

Effect of Ammonium Ion Content in Fly Ash after Selective Non-Catalytic Reduction (SNCR) on Physical and Mechanical Properties of Autoclaved Aerated Concrete (AAC)

2018 ◽  
Vol 276 ◽  
pp. 148-153
Author(s):  
Matěj Lédl ◽  
Lucie Galvánková ◽  
Rostislav Drochytka
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Power Plants ◽  
Catalytic Reduction ◽  
Combustion Process ◽  
Ammonium Ion ◽  
Mixing Process ◽  
Autoclaved Aerated Concrete ◽  
Aerated Concrete ◽  
The Impact

After introducing SNCR in coal combustion process in power plants, the valuable by-product such as fly ash remains contaminated with amount of ammonia in form of NH4HSO4, (NH4)2SO4 respectively, which became undesirable in AAC technology because the toxic ammonia is released in the air during the mixing process. This paper deals with the effect of varying ammonia content in fly ash after selective non-catalytic reduction (SNCR) on the physical-mechanical properties of the fly ash based autoclaved aerated concrete (AAC) with the main focus on determination of the impact of the various content of ammonium ion in fly ash on the initial consistency of fresh slurry, the residual content of ammonium ion in hardened aerated matrix and also the impact on the bulk density, compressive strength and tobermorite formation after hydrothermal treatment. Seven batches of AAC, made out of fly ash with rising content of ammonium ion from 0 ppm to 250 ppm, were tested and based on the results obtained it was found out that ammonia is released during the mixing process entirely and doesn‘t remain in AAC after autoclaving, moreover it doesn‘t affect the properties of both fresh slurry (no apparent foaming effect noticed) and thermally treated samples of AAC. Formation of tobermorite wasn’t negatively affected.

TRACE ELEMENT ANALYSIS OF FLY ASH BY PIXE

1999 ◽  
Vol 09 (03n04) ◽  
pp. 417-422 ◽  
Author(s):  
V. VIJAYAN ◽  
S. N. BEHERA
Keyword(s):  
Fly Ash ◽  
Trace Element ◽  
Power Plants ◽  
Building Materials ◽  
Thermal Power ◽  
Trace Element Analysis ◽  
Chemical Properties ◽  
Solid Material ◽  
Thermal Power Plants ◽  
Element Analysis

Fly ash is a major component of solid material generated by the coal-fired thermal power plants. In India the total amount of fly ash produced per annum is around 100 million tonnes. Fly ash has a great potential for utilization in making industrial products such as cement, bricks as well as building materials, besides being used as a soil conditioner and a provider of micro nutrients in agriculture. However, given the large amount of fly ash that accumulate at thermal power plants, their possible reuse and dispersion and mobilization into the environment of the various elements depend on climate, soils, indigenous vegetation and agriculture practices. Fly ash use in agriculture improved various physico-chemical properties of soil, particularly the water holding capacity, porosity and available plant nutrients. However it is generally apprehended that the application of large quantity of fly ash in fields may affect the plant growth and soil texture. Hence there is a need to characterize trace elements of fly ash. The results of trace element analysis of fly ash and pond ash samples collected from major thermal power plants of India by Particle Induced X-ray Emission (PIXE) have been discussed.

The Latest Research in Mongolia on the Utilization of Coal Combustion By-Products

2021 ◽  
Vol 323 ◽  
pp. 8-13
Author(s):  
Jadambaa Temuujin ◽  
Damdinsuren Munkhtuvshin ◽  
Claus H. Ruescher
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Power Stations ◽  
Thermal Power Stations ◽  
Coal Ashes ◽  
By Products

With a geological reserve of over 170 billion tons, coal is the most abundant energy source in Mongolia with six operating thermal power stations. Moreover, in Ulaanbaatar city over 210000 families live in the Ger district and use over 800000 tons of coal as a fuel. The three thermal power plants in Ulaanbaatar burn about 5 million tons of coal, resulting in more than 500000 tons of coal combustion by-products per year. Globally, the ashes produced by thermal power plants, boilers, and single ovens pose serious environmental problems. The utilization of various types of waste is one of the factors determining the sustainability of cities. Therefore, the processing of wastes for re-use or disposal is a critical topic in waste management and materials research. According to research, the Mongolian capital city's air and soil quality has reached a disastrous level. The main reasons for air pollution in Ulaanbaatar are reported as being coal-fired stoves of the Ger residential district, thermal power stations, small and medium-sized low-pressure furnaces, and motor vehicles. Previously, coal ashes have been used to prepare advanced materials such as glass-ceramics with the hardness of 6.35 GPa, geopolymer concrete with compressive strength of over 30 MPa and zeolite A with a Cr (III) removal capacity of 35.8 mg/g. Here we discuss our latest results on the utilization of fly ash for preparation of a cement stabilized base layer for paved roads, mechanically activated fly ash for use in concrete production, and coal ash from the Ger district for preparation of an adsorbent. An addition of 20% fly ash to 5-8% cement made from a mixture of road base gave a compressive strength of ~ 4MPa, which exceeds the standard. Using coal ashes from Ger district prepared a new type of adsorbent material capable of removing various organic pollutants from tannery water was developed. This ash also showed weak leaching characteristics in water and acidic environment, which opens up an excellent opportunity to utilize.

RESEARCH OF COMPLEX MODIFICATION OF HEAVY CONCRETE

2021 ◽  
Vol 96 (4) ◽  
pp. 107-112
Author(s):  
YU.S. FILIMONOVA ◽  
◽  
E.G. VELICHKO ◽  
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Power Plants ◽  
High Efficiency ◽  
Thermal Power ◽  
Thermal Power Plants ◽  
Complex Chemical ◽  
Composition And Structure ◽  
Combined Use ◽  
Mineral Additive

Modification of the composition and structure of heavy concrete with the use of a complex chemical-mineral additive consisting of fly ash from thermal power plants, a superplasticizer, a high-valence hardening accelerator AC and a fine-dispersed clinker component is considered. Modified concrete is characterized by an increase in compressive strength at a brand age by 67%, a decrease in the water content of a concrete mixture by 13.6% and an improvement in its workability by 11-12 cm. With the combined use of a superplasticizer and a high-valence hardening accelerator AC a significant synergistic effect is observed in the format of enhancing their plasticizing effect. The high efficiency of the application of the mixed-dispersed clinker component has been established.

scholarly journals DETERMINING THE ROLE OF INDIVIDUAL FLY ASH PARTICLES IN INFLUENCING THE VARIATION IN THE OVERALL PHYSICAL, MORPHOLOGICAL, AND CHEMICAL PROPERTIES OF FLY ASH

2016 ◽  
Vol 56 (4) ◽  
pp. 265-282 ◽  
Author(s):  
Usman Haider ◽  
Zdenek Bittnar ◽  
Lubomír Kopecky ◽  
Vít Šmilauer ◽  
Jaroslav Pokorny ◽  
...  
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Thermal Power ◽  
Chemical Properties ◽  
Cementitious Materials ◽  
Individual Particle ◽  
Particle Analysis ◽  
Fly Ashes ◽  
Alumino Silicate ◽  
Individual Particles

The properties of fly ashes vary because of the differences in the properties of their individual particles, and the determination of variation in these properties is of interest to the industries which use pulverized raw fly ash in applications, such as in cementitious materials and in the recovery of certain rare elements from raw fly ash. To investigate the differences in individual particles, four pulverized raw fly ashes from thermal power plants of the Czech Republic were used in this research. It was observed from FE-SEM that all four fly ashes consist of glassy hollow spherical, solid spherical, porous spherical, bright spherical, porous slaggy and compact slaggy particles. Box and whisker diagrams were plotted from the data of EDX individual particle analyses, which showed that the data of percentages for the Si, Al, and Fe elements is more scattered as compared to other elements. It was further observed from ternary phase diagrams and pseudo coloured images, that nature of fly ash particles changes from alumino silicate glassy to alumino silicate calcite metallic to pure ferro-metallic,where glassy particles showed high percentages and pure calcite particles were absent in fly ashes. Furthermore, a comparison between the XRF, the EDX total area analyses, showed that the EDX individual particle analysis gives more realistic and reliable data with median, mean, and the standard deviation for percentages of each element present in the fly ashes.

Sorption Properties of Fly Ash Microspheres of Thermal Power Plants

2019 ◽  
Vol 23 (1) ◽  
pp. 50-54 ◽  
Author(s):  
A.I. Fomenko ◽  
L.I. Sokolov
Keyword(s):  
Heavy Metal ◽  
Fly Ash ◽  
Metal Ions ◽  
Heavy Metal Ions ◽  
Power Plants ◽  
Thermal Power ◽  
Sorption Properties ◽  
Thermal Power Plants ◽  
Iron Ions ◽  
Quantitative Characteristics

The sorption characteristics of aluminosilicate microspheres of fly ash from thermal power plants with respect to heavy metal ions were studied with a view to their subsequent use for integrated treatment of household and industrial wastewater. The mechanism and kinetics of the sorption of total iron ions from aqueous solutions are studied, quantitative characteristics of the sorption capacity and adsorption equilibrium constants are obtained. It has been established that aluminosilicate microspheres of fly ash possess sorption properties with respect to common iron ions. The sorption isotherm of iron ions from water by the material under study is characteristic of microporous sorbents. The quantitative characteristics of the sorption process allow us to conclude about the possibility of using aluminosilicate fly ash microspheres without any additional treatment for the purification of waste water from heavy metal ions.

Sign in / Sign up

Export Citation Format

Share Document