scholarly journals Effect of calcium, citrate and urea on the stability of ultra-high temperature treated milk: A full factorial designed study

2018 ◽  
Vol 09 ◽  
Author(s):  
Maria A Karlsson
Foods ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 418 ◽  
Author(s):  
Maria A. Karlsson ◽  
Åse Lundh ◽  
Fredrik Innings ◽  
Annika Höjer ◽  
Malin Wikström ◽  
...  

The composition of raw milk is important for the stability of dairy products with a long shelf-life. Based on known historical changes in raw milk composition, the aim of this study was to get a better understanding of how possible future variations in milk composition may affect the stability of dairy products. The effects of elevated calcium, citrate, and urea levels on the stability of ultra-high temperature (UHT) treated milk stored for 52 weeks at 4, 20, 30, and 37 °C were investigated by a two-level full factorial designed study with fat separation, fat adhesion, sedimentation, color, pH, ethanol stability, and heat coagulation time as response variables. The results showed that elevated level of calcium lowered the pH, resulting in sedimentation and significantly decreased stability. Elevated level of citrate was associated with color, but the stability was not improved compared to the reference UHT milk. Elevated levels of urea or interaction terms had little effect on the stability of UHT milk. Storage conditions significantly affected the stability. In conclusion, to continue produce dairy products with high stability, the dairy industry should make sure the calcium content of raw milk is not too high and that storage of the final product is appropriate.


Author(s):  
J.K. Sonber ◽  
T.S.R. Ch. Murthy ◽  
C. Subramanian ◽  
R.C. Hubli ◽  
A.K. Suri

Ultra-high-temperature ceramics (UHTCs) are a group of materials that can withstand ultra high temperatures (1600-3000 oC) which will be encountered by future hypersonic re-entry vehicles. Future re-entry vehicles will have sharp edges to improve flight performance. The sharp leading edges result in higher surface temperature than that of the actual blunt edged vehicles that could not be withstood by the conventional thermal protection system materials. To withstand the intense heat generated when these vehicles dip in and out of the upper atmosphere, UHTC materials are needed. UHTC materials are composed of borides of early transition metals. From the larger list of borides, ZrB2 and HfB2 have received the most attention as potential candidates for leading edge materials because their oxidation resistance is superior to that of other borides due to the stability of the ZrO2 and HfO2 scales that form on these materials at elevated temperatures in oxidizing environments. Processing of these materials is very difficult as these materials are very refractory in nature. In this chapter, processes available for powder synthesis, fabrication of dense bodies, and coating processes is discussed.


1971 ◽  
Vol 38 (3) ◽  
pp. 323-332 ◽  
Author(s):  
Ruth Samel ◽  
R. W. V. Weaver ◽  
D. B. Gammack

SummarySamples of commercially processed ultra-high-temperature (UHT) milk were stored at 4, 20, 30 and 37°C for up to 2 years or until gelation occurred.The stability of the proteins to ethanol, calcium ions and rennet decreased with time of storage. However, preliminary autoclaving of the UHT milk induced a high degree of stability.The extent of protein decomposition that had occurred in the UHT milk samples depended on the time and temperature of storage. There was negligible decomposition when the samples had been autoclaved before storage at 4 and 20°C. Storage at 37°C led to significant decomposition.UHT milk samples gelled after being stored for 13 months at 4, 20 and 30°C, but not at 37°C. The autoclaved milk was still fluid after being stored for 2 years at these temperatures.The time of onset of gelation did not depend on the degree of protein breakdown, and it seemed therefore that proteolysis was not the primary cause of gelation on storage.It was concluded that the proteins in UHT milk underwent several changes on storage that were apparently independent of each other and led ultimately to coagulation of the milk. These changes included proteolysis, and a progressive loss of stability under conditions that favoured aggregation of the casein micelles.


1986 ◽  
Vol 69 (8) ◽  
pp. 2052-2059 ◽  
Author(s):  
Betty L.T. Lau ◽  
Y. Kakuda ◽  
D.R. Arnott

Author(s):  
Simon L. Harley ◽  
P. Thompson

ABSTRACTExperimentally constrained calibrations of the incorporation of H2 O and CO2 into cordierite as functions of P–T-aH2O-aCO2 are integrated with KFMASH grids which define mineral-melt equilibria in pelites. This is used to explore the impact of the volatile content and composition of cordierite on anatexis and melt-related processes in high-temperature (HT) and ultra-high-temperature (UHT) metamorphism. The strongly temperature-sensitive H2O content of cordierite coexisting with dehydration melts (0·4–1·6 wt.%) causes a 10–25% relative decrease in the amount of melt produced from pelites compared with models which treat cordierite as anhydrous.KFMASH melting grids quantified for aH2O demonstrate consistency between the measured H2O contents in cordierite from granulite-migmatite terrains and mineral equilibria. These indicate anatexis with aH2O in the range 0·26–0·16 at 6–8 kbar and 870–930°C. The pressure-stability of cordierite+garnet with respect to orthopyroxene+sillimanite+quartz in KFMASH is strongly influenced by cordierite H2O content, which decreases from 1·1 to 0·5 wt.% along the melting reaction Grt+CrdH+Kfs=Opx+Sil+Qz+L. The lower-T invariant point involving biotite (8·8 kbar/900°C) that terminates this reaction has aH2O of 0·16±0·03, whereas the higher-T terminating invariant point involving osumilite (7·9 kbar/940°C) occurs at aH2O 0·08±0·02. Osumilite-bearing assemblages in UHT terrains imply aH2O of <0·08, and at 950–1000°C and 8–9 kbar calculated aH2O is only 0·04–0·02. Cordierites stable in osumilite-bearing assemblages or with sapphirine+quartz have maximum predicted H2O contents of ca. 0·2 wt.%, consistent with H2O measured in cordierites from two sapphirine-bearing UHT samples from the Napier Complex.The addition of CO2to the H2O-undersaturated (dehydration-melting) system marginally decreases the temperature of melting because of the stabilisation of cordierite, the solid product of the peritectic melting reactions. The preferential incorporation of CO2 enhances the stability of cordierite, even at fixed aH2O, and causes the stability fields of Grt+Crd+Sil+Kfs+Qz+L and Grt+Opx+Crd+Kfs+Qz+L to expand to higher pressure, and to both higher and lower temperatures. The minimum solubility of H2O in granitic melt is independent of the CO2 content of cordierite, and the distribution of H2O between melt and cordierite is similar at a given melt H2O-content to the H2O-only system. This enhanced stability of CO2-bearing cordierite leads to a reduced stability range for osumilite-bearing assemblages to temperatures of ca. 950–975°C or greater. Cordierites in the Napier Complex UHT gneisses contain 0·5 and 1·05 wt.% CO2, consistent with a role for CO2 in stabilising cordierite with respect to osumilite in these unusual sapphirine-bearing granul


Author(s):  
E. R. Kimmel ◽  
H. L. Anthony ◽  
W. Scheithauer

The strengthening effect at high temperature produced by a dispersed oxide phase in a metal matrix is seemingly dependent on at least two major contributors: oxide particle size and spatial distribution, and stability of the worked microstructure. These two are strongly interrelated. The stability of the microstructure is produced by polygonization of the worked structure forming low angle cell boundaries which become anchored by the dispersed oxide particles. The effect of the particles on strength is therefore twofold, in that they stabilize the worked microstructure and also hinder dislocation motion during loading.


2020 ◽  
Vol 16 (8) ◽  
pp. 1183-1195
Author(s):  
Prasad Rasane ◽  
Nitya Sharma ◽  
Sana Fatma ◽  
Sawinder Kaur ◽  
Alok Jha ◽  
...  

Background: Background: Milk forms an integral part of the human diet from the nutritional point of view. Besides nutrition, it has also unique functional properties which are harnessed by the industry for numerous uses. Being highly perishable specific techniques are required to minimize the losses during processing and adequate preservation of this precious commodity. In the U.S. and many other parts of the world, the traditional pasteurization of milk requires a minimum heat treatment of 72ºC for 15 seconds with subsequent refrigeration. However, the advent of Ultra High Temperature (UHT) treatment of milk has added a new dimension to the marketing of liquid milk in urban as well as remote areas without the requirement of cold chain management. The distinctive feature of UHT processed milk is that it is commercially-sterile-not pasteurized and so has long shelf life at room temperature. UHT milk, also known as long-life milk, is emerging as an attractive commercial alternative offering a hygienic product of unmatched quality, which can be bought anywhere, at any time and in any quantity. The present review will discuss numerous aspects of UHT processing of milk with reference to historical significance, fundamental principle, various systems used and prerequisites, type of exchangers used, fouling and other defects in system, chemical and microbiological effect of the treatment, its effect on nutritional components, organoleptic quality of milk and the advantage and involved challenges of the process. Conclusion: Raw milk is easily contaminated with pathogens and microbes and hence its consumption of raw milk is associated with certain ill health effects. Therefore, heating milk before consumption is strongly suggested. Thus, UHT treatment of milk is done to ensure microbial safety and also to extend the shelf life of this highly perishable commodity. Heating milk at such a high temperature is often associated with the change of organoleptic properties like change in flavor or cooked flavor, rancidity due to microbes or acid flavor, etc. But UHT treatment does not substantially decrease the nutritional value or any other benefits of milk.


Sign in / Sign up

Export Citation Format

Share Document