scholarly journals Numerical Method of Fabric Dynamics Using Front Tracking and Spring Model

2013 ◽  
Vol 14 (5) ◽  
pp. 1228-1251 ◽  
Author(s):  
Yan Li ◽  
I-Liang Chern ◽  
Joung-Dong Kim ◽  
Xiaolin Li

AbstractWe use front tracking data structures and functions to model the dynamic evolution of fabric surface. We represent the fabric surface by a triangulated mesh with preset equilibrium side length. The stretching and wrinkling of the surface are modeled by the mass-spring system. The external driving force is added to the fabric motion through the “Impulse method” which computes the velocity of the point mass by superposition of momentum. The mass-spring system is a nonlinear ODE system. Added by the numerical and computational analysis, we show that the spring system has an upper bound of the eigen frequency. We analyzed the system by considering two spring models and we proved in one case that all eigenvalues are imaginary and there exists an upper bound for the eigen-frequency This upper bound plays an important role in determining the numerical stability and accuracy of the ODE system. Based on this analysis, we analyzed the numerical accuracy and stability of the nonlinear spring mass system for fabric surface and its tangential and normal motion. We used the fourth order Runge-Kutta method to solve the ODE system and showed that the time step is linearly dependent on the mesh size for the system.


2021 ◽  
Vol 11 (17) ◽  
pp. 8255
Author(s):  
Hongly Va ◽  
Min-Hyung Choi ◽  
Min Hong

While the cloth component in Unity engine has been used to represent the 3D cloth object for augmented reality (AR) and virtual reality (VR), it has several limitations in term of resolution and performance. The purpose of our research is to develop a stable cloth simulation based on a parallel algorithm. The method of a mass–spring system is applied to real-time cloth simulation with three types of springs. However, cloth simulation using the mass–spring system requires a small integration time-step to use a large stiffness coefficient. Furthermore, constraint enforcement is applied to obtain the stable behavior of the cloth model. To reduce the computational burden of constraint enforcement, the adaptive constraint activation and deactivation (ACAD) technique that includes the mass–spring system and constraint enforcement method is applied to prevent excessive elongation of the cloth. The proposed algorithm utilizes the graphics processing unit (GPU) parallel processing, and implements it in Compute Shader that executes in different pipelines to the rendering pipeline. In this paper, we investigate the performance and compare the behavior of the mass–spring system, constraint enforcement, and ACAD techniques using a GPU-based parallel method.



2014 ◽  
Vol 709 ◽  
pp. 200-204
Author(s):  
Lin Chang Zuo ◽  
Zhi Hong Yin

The paper uses modern control theory and mechanical and structural vibration theory to study a mass-spring system of three degrees. Using Newton's first law analyzing the force of the object, drawn the simulation diagram from the control perspective. Reflecting all changes of the independent variables and their relationships. And revealing the characteristics of the system. We also analyzed the system can not only be controlled but also can be observed, understanding the inherent nature of the system further. About the dynamic characteristics of the system, we use the main formation method to calculate the natural frequency, the main formation and displacement response of the system[1].



Proceedings ◽  
2020 ◽  
Vol 49 (1) ◽  
pp. 7
Author(s):  
Cem Guzelbulut ◽  
Katsuyuki Suzuki ◽  
Satoshi Shimono ◽  
Hiroaki Hobara

Usage of carbon fiber reinforced plastics (CFRPs) in running-specific prostheses increases day by day. The tailorable properties of CFRP blades bring many discussions about design and performance. In this study, the effect of shape on performance is investigated through force-displacement characteristics of the prosthesis. For this purpose, the geometry of prosthesis is defined by using B-splines with an initially given thickness. The prosthesis is exposed to vertical tip load at the mounting point, and contact is defined between the prosthesis and ground without friction. The aim of the simulation is to observe the contact behavior of athletes at different positions during the contact phase of a prosthesis. While the prosthesis is in contact with the ground, two different behaviors are observed: compression occurs at a larger contact zone, whereas release occurs at a smaller contact region (almost only the tip of the prosthesis). Different force-displacement characteristics, such as linear and second order, are obtained and the geometry of the prosthesis is optimized to adjust the behavior in the first region. The releasing phase of a prosthesis is related to the contact angle (angle of attack) and stiffness of the prosthesis. The two phases of contact are combined into a non-linear spring-mass system. Ground reaction forces are estimated through the non-linear mass-spring system. Finally, the importance of contacting area, length of moment arm during contact, and effect of each type of force-displacement characteristics on performance is discussed.



2021 ◽  
pp. 81-88
Author(s):  
Ali. S. Al-Nuaimi ◽  
Ola A. Mohammed

The effect of mass on the behavior of oscillatory systems in a damped spring-mass system was studied using simulation. It was found that the mass affects the amplitude and displacement in the case of an undamped oscillatory system. In critically damped systems, the mass affects the displacement exponentially, and the system doesn’t oscillate. In the case of an overdamped system, there is also no oscillatory motion, and an increase in the mass was not affected, since the system gets to rest very quickly. The study shows that simulation can be a very helpful tool to study the behavior of oscillatory physical systems. Keywords: Simple harmonic motion damped mass-Spring system, simulation



2019 ◽  
Vol 3 (1) ◽  
pp. 160-165
Author(s):  
Hendry D. Chahyadi

The designs of automotive suspension system are aiming to avoid vibration generated by road condition interference to the driver. This final project is about a quarter car modeling with simulation modeling and analysis of Two-Mass modeling. Both existing and new modeling are being compared with additional spring in the sprung mass system. MATLAB program is developed to analyze using a state space model. The program developed here can be used for analyzing models of cars and vehicles with 2DOF. The quarter car modelling is basically a mass spring damping system with the car serving as the mass, the suspension coil as the spring, and the shock absorber as the damper. The existing modeling is well-known model for simulating vehicle suspension performance. The spring performs the role of supporting the static weight of the vehicle while the damper helps in dissipating the vibrational energy and limiting the input from the road that is transmitted to the vehicle. The performance of modified modelling by adding extra spring in the sprung mass system provides more comfort to the driver. Later on this project there will be comparison graphic which the output is resulting on the higher level of damping system efficiency that leads to the riding quality.



2021 ◽  
pp. 107754632110004
Author(s):  
Sanjukta Chakraborty ◽  
Aparna (Dey) Ghosh ◽  
Samit Ray-Chaudhuri

This article presents the design of a tuned mass damper with a conical spring to enable tuning to the natural frequency of the system at multiple values, as may be convenient in case of a system with fluctuations in the mass. The principle and design procedure of the conical spring in the context of a varying mass system are presented. A passive feedback control mechanism based on a simple pulley-mass system is devised to cater to the multi-tuning requirements. A design example of an elevated water tank with fluctuating water content, subjected to ground excitation, is considered to numerically illustrate the efficiency of such a tuned mass damper associated with the conical spring. The conical spring is designed based on the tuning requirements at different mass conditions of the elevated water tank by satisfying the allowable load bearing capacity of the spring. Comparisons are made with the conventional passive tuned mass damper with a linear spring tuned to the full tank condition. Results from time history analysis reveal that the conical spring-tuned mass damper can be successfully designed to remain tuned and thereby achieve significant response reductions under stiffening conditions of the primary structure, whereas the linear spring-tuned mass damper suffers performance degradation because of detuning, whenever there is any fluctuation in the system mass.



NANO ◽  
2015 ◽  
Vol 10 (02) ◽  
pp. 1550024 ◽  
Author(s):  
S. Kamal Jalali ◽  
M. Hassan Naei ◽  
Nicola Maria Pugno

Application of single layered graphene sheets (SLGSs) as resonant sensors in detection of ultra-fine nanoparticles (NPs) is investigated via molecular dynamics (MD) and nonlocal elasticity approaches. To take into consideration the effect of geometric nonlinearity, nonlocality and atomic interactions between SLGSs and NPs, a nonlinear nonlocal plate model carrying an attached mass-spring system is introduced and a combination of pseudo-spectral (PS) and integral quadrature (IQ) methods is proposed to numerically determine the frequency shifts caused by the attached metal NPs. In MD simulations, interactions between carbon–carbon, metal–metal and metal–carbon atoms are described by adaptive intermolecular reactive empirical bond order (AIREBO) potential, embedded atom method (EAM), and Lennard–Jones (L–J) potential, respectively. Nonlocal small-scale parameter is calibrated by matching frequency shifts obtained by nonlocal and MD simulation approaches with same vibration amplitude. The influence of nonlinearity, nonlocality and distribution of attached NPs on frequency shifts and sensitivity of the SLGS sensors are discussed in detail.



2011 ◽  
Vol 133 (2) ◽  
Author(s):  
Venkata K. Yadalam ◽  
B. F. Feeny

A method of modal analysis by a mass-weighted proper orthogonal decomposition for multi-degree-of-freedom and distributed-parameter systems of arbitrary mass distribution is outlined. The method involves reduced-order modeling of the system mass distribution so that the discretized mass matrix dimension matches the number of sensed quantities, and hence the dimension of the response ensemble and correlation matrix. In this case, the linear interpolation of unsensed displacements is used to reduce the size of the mass matrix. The idea is applied to the modal identification of a mass-spring system and an exponential rod.



Author(s):  
Sheikh Md Rabiul Islam

In this paper analysis of a RLC circuit model that has been described optimal time step and minimize of error using numerical method. The goal is to reach the optimal time response due to the input for which optimal output response reaches a minimum error and also compared with ODE solver of MATLAB packages for the different cell (mesh) size of the RLC model. Table is constructed of the model to evaluate optimal time step and also CPU time into the simulation using MATLAB 7.6.0(R2008a).The values of register, capacitor and inductor as well as electromagnetic force are obtained through the mathematical relations of the model. The general analysis of the RLC circuit due to the optimal time step and minimum error is developed after several analysis and operations. The theoretical results show effectiveness of optimized of the model. Keywords: Optimal time step; MATLAB; Trapezoidal; Implicit Euler; Runge-Kutta method; RLC circuit. DOI: http://dx.doi.org/10.3329/diujst.v7i1.9650   Daffodil International University Journal of Science and Technology Vol.7(1) 2012 67-73



2018 ◽  
Vol 7 (3) ◽  
pp. 31
Author(s):  
Rosa Virginia Hernández ◽  
Luis Fernando Mariño ◽  
Mawency Vergel

En este artículo se presenta la caracterización del conocimiento semántico evidenciado por un grupo de estudiantes en la representación externa a problemas de ecuaciones diferenciales lineales de segundo orden como modelos matemáticos. El trabajo fue cuantitativo de tipo exploratorio y descriptivo utilizando un cuestionario en la recolección de información. El soporte teórico que dio sentido al estudio fue el modelo de dos etapas propuesto por Mayer R. para la resolución de problemas matemáticos, el ciclo de modelación bajo la perspectiva cognitiva según Borromeo Ferri y la teoría de las representaciones de Goldin y Kaput. La investigación se centró específicamente en la fase de representación del modelo. Entre los principales hallazgos se destaca que cada participante hace su propia representación externa a conceptos como: sistema masa-resorte, peso, masa, punto de equilibrio, constante de elasticidad, punto de equilibrio, ley de Hooke, fuerza amortiguadora, fuerza externa, ley de Newton, entre otros. Se evidencian también dificultades en el tránsito del lenguaje natural al lenguaje matemático y la representación externa de cada una de los signos, símbolos o expresiones matemáticas inmersas en el problema de palabra, debido a que el resolutor tiene que construir un modelo mental de la situación real y plasmarlo en un modelo matemático. Lo anterior pone de manifiesto la importancia que tiene el conocimiento semántico en la etapa de traducción cuando se intentan resolver problemas como situaciones reales a modelar.Palabras clave: resolución de problemas, ciclos de modelación, problemas de palabra, representaciones externas, conocimiento extra matemático, modelación matemática. AbstractThis article presents the characterization of the semantic knowledge evidenced by a group of students in the external representation to problems of second order linear differential equations as mathematical models. The work was quantitative exploratory and descriptive using a questionnaire in the collection of information. The theoretical support that gave meaning to the study was the two-stage model proposed by Mayer R. for solving mathematical problems, the modeling cycle under the cognitive perspective according to Borromeo Ferri and the theory of representations of Goldin and Kaput. The research focused specifically on the representation phase of the model. Among the main findings is that each participant makes his own external representation to concepts such as: mass-spring system, weight, mass, equilibrium point, constant of elasticity, equilibrium point, Hooke's law, damping force, external force, law of Newton, among others. Difficulties are also evident in the transition from natural language to mathematical language and the external representation of each of the signs, symbols or mathematical expressions involved in the word problem, because the resolver has to construct a mental model of the real situation and translate it into a mathematical model. This demonstrates the importance of semantic knowledge in the translation stage when trying to solve problems as real situations to be modeledKeywords: problem solving, modeling cycles, word problems, external representations, extra mathematical knowledge, mathematical modeling.ResumoEste artigo apresenta a caracterização do conhecimento semântico evidenciado por um grupo de estudantes na representação externa a problemas de equações diferenciais lineares de segunda ordem como modelos matemáticos. O trabalho foi quantitativo exploratório e descritivo usando um questionário na coleta de informações. O suporte teórico que deu sentido ao estudo foi o modelo de dois estágios proposto por Mayer R. para resolver problemas matemáticos, o ciclo de modelagem sob a perspectiva cognitiva de acordo com Borromeo Ferri e a teoria das representações de Goldin e Kaput. A pesquisa focalizou especificamente a fase de representação do modelo. Entre os principais achados, cada participante faz sua própria representação externa para conceitos como: sistema de massa-mola, peso, massa, ponto de equilíbrio, constante de elasticidade, ponto de equilíbrio, lei de Hooke, força de amortecimento, força externa, lei de Newton, entre outros. As dificuldades também são evidentes na transição da linguagem natural para a linguagem matemática e a representação externa de cada um dos signos, símbolos ou expressões matemáticas envolvidas na palavra problema, porque o resolvedor tem que construir um modelo mental da situação real e traduzi-lo para um modelo matemático. Isso demonstra a importância do conhecimento semântico na fase de tradução ao tentar resolver problemas como situações reais a serem modeladas. ______________________________________________________ Palavras-chave: resolução de problemas, ciclos de modelagem, problemas de palavra, representação externa, conhecimento extra matemático, modelagem matemática



Sign in / Sign up

Export Citation Format

Share Document