scholarly journals Research on Numerical Simulation of 3D Leakage Magnetic Field and Short-circuit Impedance of Axial Dual-low-voltage Split-winding Transformer

2013 ◽  
Vol 05 (04) ◽  
pp. 1093-1096 ◽  
Author(s):  
Yan Li ◽  
Longnv Li ◽  
Yongteng Jing ◽  
Fangxu Han
2014 ◽  
Vol 986-987 ◽  
pp. 1767-1770
Author(s):  
Fang Xu Han ◽  
Yan Li ◽  
Xin Sun ◽  
Longnv Li

The leakage magnetic field and equivalent circuit model of OLTC double-winding power transformer has been established by electromagnetic field Finite Element analysis software. The method of field-circuit coupled method has been used to calculate its magnetic field leakage, the short circuit impedance obtained by the calculation of formula and compared with the experimental data. At the same time, based on the calculation method for the Visual Basic language as a tool for MAGNET software for secondary development, obtain the software to calculate the short-circuit impedance of power transformer simulation software, and is verified by using the typical products, proves the validity of this software.


Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1314
Author(s):  
Cunxiang Yang ◽  
Yiwei Ding ◽  
Hongbo Qiu ◽  
Bin Xiong

The turn-to-turn faults (TTF) are also inevitable in split-winding transformers. The distorted leakage field generated by the TTF current results in large axial forces and end thrusts in the fault windings as well as affecting other branch windings normal operation, so it is of significance to study TTF of split-winding transformers. In this paper, the characteristics analysis of the split-winding transformer under the TTFs of the low voltage winding at different positions are presented. A 3600 KVA four split-windings transformer is taken as an example. Then, a simplified three-dimensional simplified model is established, taking into account the forces of the per-turn coil. The nonlinear-transient field-circuit coupled finite element method is used for the model. The leakage field distribution under the TTFs of the low voltage winding at different positions is studied. The resultant force of the short-circuit winding and the force of the per-turn coil are obtained. Subsequently, the force and current relationship between the branch windings are analyzed. The results show that the TTF at the specific location has a great influence on the axial windings on the same core, and the distorted leakage magnetic field will cause excessive axial force and end thrust of the normal and short-circuit windings. These results can provide a basis for the short-circuit design of split-winding transformer.


2010 ◽  
Vol 33 (1-2) ◽  
pp. 191-196 ◽  
Author(s):  
Jianmin Wang ◽  
Chongyou Jing ◽  
Yana Fan ◽  
Lanrong Liu ◽  
Yong Du ◽  
...  

2011 ◽  
Vol 138-139 ◽  
pp. 764-769
Author(s):  
Jian Jun Liu ◽  
Jian Min Wang ◽  
Chong You Jing ◽  
Chang Zai Fan ◽  
Yuan Zhai

The Simplified model of both calculating leakage magnetic field and mechanical force of windings at short circuit condition for a 120MVA/220kV power transformer is set up. The leakage magnetic field ‚ short-circuit force and stress in transformer windings are analyzed and their distributing characteristics are acquired respectively by using FEM. The calculation method and results are validated by withstanding short circuit strength test of the product. A number of useful suggestions are given for design of power transformers.


Author(s):  
S. Hasegawa ◽  
T. Kawasaki ◽  
J. Endo ◽  
M. Futamoto ◽  
A. Tonomura

Interference electron microscopy enables us to record the phase distribution of an electron wave on a hologram. The distribution is visualized as a fringe pattern in a micrograph by optical reconstruction. The phase is affected by electromagnetic potentials; scalar and vector potentials. Therefore, the electric and magnetic field can be reduced from the recorded phase. This study analyzes a leakage magnetic field from CoCr perpendicular magnetic recording media. Since one contour fringe interval corresponds to a magnetic flux of Φo(=h/e=4x10-15Wb), we can quantitatively measure the field by counting the number of finges. Moreover, by using phase-difference amplification techniques, the sensitivity for magnetic field detection can be improved by a factor of 30, which allows the drawing of a Φo/30 fringe. This sensitivity, however, is insufficient for quantitative analysis of very weak magnetic fields such as high-density magnetic recordings. For this reason we have adopted “fringe scanning interferometry” using digital image processing techniques at the optical reconstruction stage. This method enables us to obtain subfringe information recorded in the interference pattern.


Sign in / Sign up

Export Citation Format

Share Document