scholarly journals Analysis of Turn-to-Turn Fault on Split-Winding Transformer Using Coupled Field-Circuit Approach

Processes ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 1314
Author(s):  
Cunxiang Yang ◽  
Yiwei Ding ◽  
Hongbo Qiu ◽  
Bin Xiong
Keyword(s):  
Low Voltage ◽  
Short Circuit ◽  
Three Dimensional ◽  
Great Influence ◽  
Normal Operation ◽  
Transient Field ◽  
Axial Forces ◽  
Leakage Field ◽  
Characteristics Analysis ◽  
Split Winding

The turn-to-turn faults (TTF) are also inevitable in split-winding transformers. The distorted leakage field generated by the TTF current results in large axial forces and end thrusts in the fault windings as well as affecting other branch windings normal operation, so it is of significance to study TTF of split-winding transformers. In this paper, the characteristics analysis of the split-winding transformer under the TTFs of the low voltage winding at different positions are presented. A 3600 KVA four split-windings transformer is taken as an example. Then, a simplified three-dimensional simplified model is established, taking into account the forces of the per-turn coil. The nonlinear-transient field-circuit coupled finite element method is used for the model. The leakage field distribution under the TTFs of the low voltage winding at different positions is studied. The resultant force of the short-circuit winding and the force of the per-turn coil are obtained. Subsequently, the force and current relationship between the branch windings are analyzed. The results show that the TTF at the specific location has a great influence on the axial windings on the same core, and the distorted leakage magnetic field will cause excessive axial force and end thrust of the normal and short-circuit windings. These results can provide a basis for the short-circuit design of split-winding transformer.

scholarly journals A Photovoltaic-Fed Z-Source Inverter Motor Drive with Fault-Tolerant Capability for Rural Irrigation

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4630
Author(s):  
Vivek Sharma ◽  
M. J. Hossain ◽  
S. M. Nawazish Ali ◽  
Muhammad Kashif
Keyword(s):  
Rural Areas ◽  
Low Voltage ◽  
Fault Tolerant ◽  
Short Circuit ◽  
Harmonic Spectrum ◽  
Open Circuit ◽  
Normal Operation ◽  
Modulation Scheme ◽  
Pv Systems ◽  
Voltage Output

In recent years, photovoltaic (PV) systems have emerged as economical solutions for irrigation systems in rural areas. However, they are characterized by low voltage output and less reliable configurations. To address this issue in this paper, a promising inverter configuration called Impedance (Z)-source inverter (ZSI) is designed and implemented to obtain high voltage output with single-stage power conversion, particularly suitable for irrigation application. An improved and efficient modulation scheme and design specifications of the network parameters are derived. Additionally, a suitable fault-tolerant strategy is developed and implemented to improve reliability and efficiency. It incorporates an additional redundant leg with an improved control strategy to facilitate the fault-tolerant operation. The proposed fault-tolerant circuit is designed to handle switch failures of the inverter modules due to the open-circuit and short-circuit faults. The relevant simulation and experimental results under normal, faulty and post-fault operation are presented. The post-fault operation characteristics are identical to the normal operation. The motor performance characteristics such as load current, torque, harmonic spectrum, and efficiency are thoroughly analysed to prove the suitability of the proposed system for irrigation applications. This study provides an efficient and economical solution for rural irrigation utilized in developing countries, for example, India.

Low - Voltage Scanning Electron Microscopy Imaging, Secondary and Backscatter, With Microchannel Plate Detector

1990 ◽  
Vol 48 (1) ◽  
pp. 442-442
Author(s):  
Galen Powers ◽  
Ray Cochran
Keyword(s):  
Low Voltage ◽  
Beam Current ◽  
Microchannel Plate ◽  
Normal Operation ◽  
Microscopy Imaging ◽  
Backscatter Signal ◽  
Vacuum Interface ◽  
Width Measurements ◽  
Working Distance ◽  
Beam Currents

The capability to obtain symmetrical images at voltages as low as 200 eV and beam currents less than 9 pico amps is believed to be advantageous for metrology and study of dielectric or biological samples. Symmetrical images should allow more precise and accurate line width measurements than currently achievable by traditional secondary electron detectors. The low voltage and current capability should allow imaging of samples which traditionally have been difficult because of charging or electron beam damage.The detector system consists of a lens mounted dual anode MicroChannel Plate (MCP) detector, vacuum interface, power supplies, and signal conditioning to interface directly to the video card of the SEM. The detector has been miniaturized so that it does not interfere with normal operation of the SEM sample handling and alternate detector operation. Biasing of the detector collection face will either add secondaries to the backscatter signal or reject secondaries yielding only a backscatter image. The dual anode design allows A−B signal processing to provide topological information as well as symmetrical A+B images.Photomicrographs will show some of the system capabilities. Resolution will be documented with gold on carbon. Variation of voltage, beam current, and working distance on dielectric samples such as glass and photoresist will demonstrate effects of common parameter changes.

Advances in coupled axial turbine and nonaxisymmetric exhaust volute aerodynamics for turbomachinery

2020 ◽  
pp. 095441002096645
Author(s):  
Jie Gao ◽  
Chunde Tao ◽  
Dongchen Huo ◽  
Guojie Wang
Keyword(s):  
Performance Improvement ◽  
High Efficiency ◽  
Three Dimensional ◽  
Great Influence ◽  
Aerodynamic Characteristics ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Axial Turbine ◽  
Flow Interactions ◽  
And Performance

Marine, industrial, turboprop and turboshaft gas turbine engines use nonaxisymmetric exhaust volutes for flow diffusion and pressure recovery. These processes result in a three-dimensional complex turbulent flow in the exhaust volute. The flows in the axial turbine and nonaxisymmetric exhaust volute are closely coupled and inherently unsteady, and they have a great influence on the turbine and exhaust aerodynamic characteristics. Therefore, it is very necessary to carry out research on coupled axial turbine and nonaxisymmetric exhaust volute aerodynamics, so as to provide reference for the high-efficiency turbine-volute designs. This paper summarizes and analyzes the recent advances in the field of coupled axial turbine and nonaxisymmetric exhaust volute aerodynamics for turbomachinery. This review covers the following topics that are important for turbine and volute coupled designs: (1) flow and loss characteristics of nonaxisymmetric exhaust volutes, (2) flow interactions between axial turbine and nonaxisymmetric exhaust volute, (3) improvement of turbine and volute performance within spatial limitations and (4) research methods of coupled turbine and exhaust volute aerodynamics. The emphasis is placed on the turbine-volute interactions and performance improvement. We also present our own insights regarding the current research trends and the prospects for future developments.

Experimental investigation on the three-dimensional flow field from a meltblowing slot die

e-Polymers ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 724-732
Author(s):  
Changchun Ji ◽  
Yudong Wang
Keyword(s):  
Flow Field ◽  
Three Dimensional ◽  
Great Influence ◽  
Distribution Characteristics ◽  
Air Velocity ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Airflow Distribution ◽  
Slot Die ◽  
Center Area

AbstractTo investigate the distribution characteristics of the three-dimensional flow field under the slot die, an online measurement of the airflow velocity was performed using a hot wire anemometer. The experimental results show that the air-slot end faces have a great influence on the airflow distribution in its vicinity. Compared with the air velocity in the center area, the velocity below the slot end face is much lower. The distribution characteristics of the three-dimensional flow field under the slot die would cause the fibers at different positions to bear inconsistent air force. The air velocity of the spinning centerline is higher than that around it, which is more conducive to fiber diameter attenuation. The violent fluctuation of the instantaneous velocity of the airflow could easily cause the meltblowing fiber to whip in the area close to the die.

scholarly journals A Field Measurement Based Wind Characteristics Analysis of a Typhoon in Near-Ground Boundary Layer

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 873
Author(s):  
Dandan Xia ◽  
Liming Dai ◽  
Li Lin ◽  
Huaifeng Wang ◽  
Haitao Hu
Keyword(s):  
Turbulence Intensity ◽  
Field Measurement ◽  
Three Dimensional ◽  
Wind Data ◽  
Statistical Characteristics ◽  
Gust Factor ◽  
Characteristics Analysis ◽  
Wind Characteristics ◽  
The Mean ◽  
The Relationship

The field measurement was conducted to observe the wind field data of West Pacific typhoon “Maria” in this research. With the application of ultrasonic anemometers installed in different heights (10 m, 80 m, 100 m) of the tower, the three dimensional wind speed data of typhoon “Maria” was acquired. In addition, vane-type anemometers were installed to validate the accuracy of the wind data from ultrasonic anemometers. Wind characteristics such as the mean wind profile, turbulence intensity, integral length scale, and wind spectrum are studied in detail using the collected wind data. The relationship between the gust factor and turbulence intensity was also studied and compared with the existing literature to demonstrate the characteristics of Maria. The statistical characteristics of the turbulence intensity and gust factor are presented. The corresponding conclusion remarks are expected to provide a useful reference for designing wind-resistant buildings and structures.

scholarly journals Engineering Comprehensive Model of Complex Wind Fields for Flight Simulation

Aerospace ◽  
2021 ◽  
Vol 8 (6) ◽  
pp. 145
Author(s):  
Jianwei Chen ◽  
Liangming Wang ◽  
Jian Fu ◽  
Zhiwei Yang
Keyword(s):  
Wind Field ◽  
Three Dimensional ◽  
Great Influence ◽  
Spatial Location ◽  
Flight Simulation ◽  
Comprehensive Model ◽  
Flight Trajectory ◽  
Wind Fields ◽  
Wind Field Simulation ◽  
Low Level Jet

A complex wind field refers to the typical atmospheric disturbance phenomena existing in nature that have a great influence on the flight of aircrafts. Aimed at the issues involving large volume of data, complex computations and a single model in the current wind field simulation approaches for flight environments, based on the essential principles of fluid mechanics, in this paper, wind field models for two kinds of wind shear such as micro-downburst and low-level jet plus three-dimensional atmospheric turbulence are established. The validity of the models is verified by comparing the simulation results from existing wind field models and the measured data. Based on the principle of vector superposition, three wind field models are combined in the ground coordinate system, and a comprehensive model of complex wind fields is established with spatial location as the input and wind velocity as the output. The model is applied to the simulated flight of a rocket projectile, and the change in the rocket projectile’s flight attitude and flight trajectory under different wind fields is analyzed. The results indicate that the comprehensive model established herein can reasonably and efficiently reflect the influence of various complex wind field environments on the flight process of aircrafts, and that the model is simple, extensible, and convenient to use.

scholarly journals Magneto-Thermo-Structural Analysis of Power Transformers under Inrush and Short Circuit Conditions

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3266
Author(s):  
Antonio Roniel Marques de Sousa ◽  
Marcus Vinicius Alves Nunes ◽  
Wellington da Silva Fonseca ◽  
Ramon Cristian Fernandes Araujo ◽  
Diorge de Souza Lima
Keyword(s):  
Structural Analysis ◽  
Electric Power ◽  
Short Circuit ◽  
Real Data ◽  
Short Circuit Current ◽  
Power Transformers ◽  
Inrush Current ◽  
Electric Power Supply ◽  
Axial Forces ◽  
Radial Forces

The main equipment responsible for connection and transmission of electric power from generating centers to consumers are power transformers. This type of equipment is subject to various types of faults that can affect its components, in some cases also compromising its operation and, consequently, the electric power supply. Thus, in this paper, electromagnetic, thermal, and structural analysis of power transformers was carried out with the objective of providing the operator with information on the ideal moment for performing predictive maintenance, avoiding unplanned shutdowns. For this, computational simulations were performed using the finite element method (FEM) and, from that, the different transformer operation ways, nominal currents, inrush current, and short-circuit current were analyzed. In this perspective, analyses of the effects that thermal expansion, axial forces, and radial forces exerted were carried out, contributing to possible defects in this type of equipment. As a study object, simulations were carried out on a 50 MVA single-phase transformer. It is important to emphasize that the simulations were validated with real data of measurements and with results presented in the current literature.

Sign in / Sign up

Export Citation Format

Share Document