The Impact of Inlet Valve Deposits on PFI Gasoline SI Engines – Quantified Effects on Fuel Consumption

Author(s):  
R. J. Price ◽  
D. P. Martin ◽  
N. Dickens ◽  
P. Bohr
2020 ◽  
Vol 3 (1) ◽  
pp. 56
Author(s):  
Arkadiusz Gendek ◽  
Monika Aniszewska ◽  
Witold Zychowicz ◽  
Tadeusz Moskalik ◽  
Jan Malaťák ◽  
...  

The aim of the research was to verify the impact of selected parameters on the efficiency and organization of chipper operations. The paper analyzes chipping operations in Polish forests with a focus on work site location, overnight chipper location, chipper workload per site, fuel consumption, and work shift duration, as all of these factors may affect operating efficiency. The mean chipper travel distance between sites during a shift ranged from 4.74 km to 9.5 km (chippers moved on average every other day). The mean work shift duration was 12.4 h. At the end of a shift, the chippers traveled on average from 4.2 km to 6.3 km to an overnight location. At the beginning of a workday, the chippers were dispatched to sites at a distance of 2.5 km to 4.0 km. The average fuel consumption of the forwarder-mounted chippers was 16 L/h and that of the truck-mounted chipper was 7.7 L/h. It was found that the following actions have a decisive influence on the effectiveness of the operation of the chippers: determination of the size of individual tasks and the deployment of successive forest areas, indication of the proper location of the machine base, and the method of accessing the forest area.


Author(s):  
Alex Oliveira ◽  
Junfeng Yang ◽  
Jose Sodre

Abstract This work evaluated the effect of cooled exhaust gas recirculation (EGR) on fuel consumption and pollutant emissions from a diesel engine fueled with B8 (a blend of biodiesel and Diesel 8:92%% by volume), experimentally and numerically. Experiments were carried out on a Diesel power generator with varying loads from 5 kW to 35 kW and 10% of cold EGR ratio. Exhaust emissions (e.g. THC, NOX, CO etc.) were measured and evaluated. The results showed mild EGR and low biodiesel content have minor impact of engine specific fuel consumption, fuel conversion efficiency and in-cylinder pressure. Meanwhile, the combination of EGR and biodiesel reduced THC and NOX up to 52% and 59%, which shows promising effect on overcoming the PM-NOX trade-off from diesel engine. A 3D CFD engine model incorporated with detailed biodiesel combustion kinetics and NOx formation kinetics was validated against measured in-cylinder pressure, temperature and engine-out NO emission from diesel engine. This valid model was then employed to investigate the in-cylinder temperature and equivalence ratio distribution that predominate NOx formation. The results showed that the reduction of NOx emission by EGR and biodiesel is obtained by a little reduction of the local in-cylinder temperature and, mainly, by creating comparatively rich combusting mixture.


2019 ◽  
Vol 26 (3) ◽  
pp. 31-38
Author(s):  
Wojciech Gis ◽  
Maciej Gis ◽  
Piotr Wiśniowski ◽  
Mateusz Bednarski

Abstract Limiting emissions of harmful substances is a key task for vehicle manufacturers. Excessive emissions have a negative impact not only on the environment, but also on human life. A significant problem is the emission of nitrogen oxides as well as solid particles, in particular those up to a diameter of 2.5 microns. Carbon dioxide emissions are also a problem. Therefore, work is underway on the use of alternative fuels to power the vehicle engines. The importance of alternative fuels applies to spark ignition engines. The authors of the article have done simulation tests of the Renault K4M 1.6 16v traction engine for emissions for fuels with a volumetric concentration of bioethanol from 10 to 85 percent. The analysis was carried out for mixtures as substitute fuels – without doing any structural changes in the engine's crankshafts. Emission of carbon monoxide, carbon dioxide, hydrocarbons, oxygen at full throttle for selected rotational speeds as well as selected engine performance parameters such as maximum power, torque, hourly and unit fuel consumption were determined. On the basis of the simulation tests performed, the reasonableness of using the tested alternative fuels was determined on the example of the drive unit without affecting its constructions, in terms of e.g. issue. Maximum power, torque, and fuel consumption have also been examined and compared. Thus, the impact of alternative fuels will be determined not only in terms of emissions, but also in terms of impact on the parameters of the power unit.


2018 ◽  
Vol 173 (2) ◽  
pp. 55-60
Author(s):  
Małgorzata PAWLAK ◽  
Andrzej MAJKA ◽  
Michał KUŹNIAR ◽  
Jowita PAWLUCZY

Among the most important problems currently faced by air transport, we can distinguish the adverse impact of aircrafts on the natu-ral environment, as well as the rising costs of transport. One of the possibilities to improve this situation is better adjustment of aircraft characteristics to the performed transport tasks, taking into account all the requirements and limitations that exist in air traffic and the adverse impact of air transport on the natural environment. It is reflected in the research tasks conducted under the SESAR program. The aspiration to minimize the adverse impact of aircrafts on the environment is executed, among others, through determining such trajectories that are characterized by minimal fuel consumption or minimal emission of harmful substances in the engines exhausts. These goals are corresponding with the research conducted and described in the paper. The main aim of the work was to analyse the impact of wind speed and direction on the emission of harmful substances of a jet aircraft performing a flight on a given route. For research purposes, the route between two Polish cities Gdansk and Rzeszow was considered. The distance between the two airports was divided into sections for which wind direction and strength were determined (read from the windy.com website). Next, the aircraft per-formance was determined and the fuel consumption and the amount of harmful compounds (CO2, NOx, CO and HC), emitted in the en-gines exhausts were determined for the route from Gdansk to Rzeszow (under favourable wind conditions) and on the return route – from Rzeszow to Gdansk (under unfavourable wind conditions). For comparative purposes, emission of these substances for windless condi-tions was also determined. The results are presented in tables and depicted in the graph, as well as discussed in the conclusions of the paper.


2021 ◽  
Vol 67 (1) ◽  
pp. 47-51
Author(s):  
Tatjana Savković ◽  
Pavle Gladović ◽  
Milica Miličić ◽  
Pavle Pitka ◽  
Dejan Koleška

The paper evaluates the impact of eco-driving programs on driving behavior. The study involved 4 professional truck drivers, which examined two operational driving prameters: fuel consumption and idling. Driving behavior was analyzed through three periods: pre-training period (P1), training period (P2), first month after training (P3) and second month after training (P4). Data were collected using Scania Fleet Management System. The results show that there was an improvement in the observed parameters in short-term. Namely, a decrease in fuel consumption and idling was achieved, in the periods P2, P3 and P4 in relation to the period P1. Due to the realized reductions of the observed parameters, costs in transport companies can be significantly reduced annually.


2018 ◽  
Vol 6 (1) ◽  
pp. 455-462
Author(s):  
František Synák ◽  
Vladimír Rievaj ◽  
Monika Kiktová ◽  
Tomasz Figlus

The amount of fossil fuels consumed has direct impact on global pollution and health status of the human population. An increasing amount of fuel consumed leads to the increase using of non-renewable resources of energy. This article deals with possibilities of reducing the fuel consumption by covering the loading capacity of tipping semi-trailer. The introduction of this paper describes the impact the amount of fuel consumed on production of carbon dioxide. The ratio of driving resistances to fuel consumption is shown in the graph. In the second part of the article there is the methodology of the measurements. The measurements were conducted by driving test. The fuel consumption of tipping semi-trailer was measured during the driving with uncovered and covered loading capacity. The importance of this paper lies in the quantified the possibilities of reducing the fuel consumption by covering the loading capacity of tipping semi-trailer designed to carry bulk materials.


2020 ◽  
Vol 2020 ◽  
pp. 1-17
Author(s):  
Junqiang Wan ◽  
Honghai Zhang ◽  
Fangzi Liu ◽  
Wenying Lv ◽  
Yifei Zhao

In order to realize the concept of air traffic sustainable operation, taking the aircraft climbing stage as an example, firstly, we establish the vertical trajectory model of aircraft climbing, analyze the change rule of aircraft performance parameters under different indicated airspeed, and establish the RTA and RHA constraint models according to the waypoint constraints. Then, considering the fuel economy and the greenhouse effect of pollutant emission, we establish a multiobjective model of aircraft flight parameter optimization, and, based on the multiobjective genetic algorithm, we establish an optimization model. Finally, we use B737-800 aircraft to carry out simulation experiments and find that, with the change of speed, fuel consumption and warming trend are different, and “objective weight, aircraft mass, flight distance, RTA time window, and wind” have different effects on the optimization results. The results show that this optimization method has a good compromise between fuel consumption and greenhouse effect by changing the weighting factor. By optimizing the flight parameters of the aircraft, it can effectively reduce the impact on the environment and provide theoretical support for the green flight of the aircraft.


Sign in / Sign up

Export Citation Format

Share Document