Solutions for Bearing Fixation on Aluminum Water Pump Housing and Anchorage Enhancement Considering High Temperature Operation for Materials with Different Coefficient of Thermal Expansion

2012 ◽  
Author(s):  
Vinicius Durazzo Negrisolo ◽  
Ayres P. Andrade Filho ◽  
Edson Nascimento ◽  
Jose Marcelo Moura Silva ◽  
Edgard Ferraz
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Coefficient Of Thermal Expansion ◽  
Water Pump ◽  
Pump Housing ◽  
High Temperature Operation

NILO ALLOY 36

Alloy Digest ◽  
1987 ◽  
Vol 36 (8) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Constant Coefficient ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Iron Nickel

Abstract NILO alloy 36 is a binary iron-nickel alloy having a very low and essentially constant coefficient of thermal expansion at atmospheric temperatures. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-79. Producer or source: Inco Alloys International Inc..

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

RED X-20

Alloy Digest ◽  
1960 ◽  
Vol 9 (2) ◽  
Keyword(s):  
Wear Resistance ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Aluminum Silicon Alloy ◽  
Temperature Performance

Abstract RED X-20 is a heat treatable hypereutectic aluminum-silicon alloy with excellent wear resistance and a very low coefficient of thermal expansion. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-89. Producer or source: Apex Smelting Company.

AA 4032

Alloy Digest ◽  
1990 ◽  
Vol 39 (7) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance

Abstract AA 4032 has a comparatively low coefficient of thermal expansion and good forgeability. The alloy takes on an attractive dark gray appearance when anodized which may be desirable in architectural applications. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-305. Producer or source: Various aluminum companies.

Sandwich Structured Power Module for High Temperature SiC Power Semiconductor Devices

2014 ◽  
Vol 2014 (1) ◽  
pp. 000757-000762 ◽  
Author(s):  
Takeshi ANZAI ◽  
Yoshinori MURAKAMI ◽  
Shinji SATO ◽  
Hidekazu TANISAWA ◽  
Kohei HIYAMA ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Semiconductor Devices ◽  
Ceramic Substrate ◽  
Power Module ◽  
Power Semiconductor ◽  
Power Semiconductor Devices ◽  
High Temperature Operation

A high temperature sandwich structured power module for high temperature SiC power semiconductor devices has been accomplished. Problems were found in the high temperature building-up process of the module caused by excess warpage of the ceramic substrate. Also the high temperature operation of the power module brings an excess warpage of the structure caused by parts having different coefficients of thermal expansion (CTEs) from each other. In this paper, some countermeasures to overcome the problems are demonstrated.

Influences of High Temperature Treatment of C/C on the Mechanical Properties of C/C-SiC Composites

2015 ◽  
Vol 816 ◽  
pp. 78-83
Author(s):  
Dong Lin ◽  
Jing Wang ◽  
Chang Rui Zhang ◽  
Ying Bin Cao ◽  
Rong Jun Liu
Keyword(s):  
Mechanical Properties ◽  
Thermal Expansion ◽  
High Temperature ◽  
Coefficient Of Thermal Expansion ◽  
Temperature Treatment ◽  
High Temperature Treatment ◽  
Sic Composites

C/C-SiC composite as low expansion material for space opto-mechanical structures was prepared by gaseous silicon infiltration after high temperature treatment (HTT) on C/C. 2000°C and 2400°C were selected as the treatment temperatures for C/C to study the influences on the properties of C/C-SiC composite. The graphitization level of amorphous C in C/C was improved by HTT. The porosity of C/C increased from 32.88% to 34.25% (2000°C) and 41.06% (2400°C) respectively. In addition, a higher HTT temperature led to a higher density of C/C-SiC composite and a lower SiC content. Furthermore, the mechanical properties and coefficient of thermal expansion (CTE) of the composite decreased as the temperature increased. After 2000°C HTT, the CTE of C/C-SiC composite decreased to-0.055×10-6·K-1 and the mechanical properties (218 MPa) could meet the application demand at the same time.

scholarly journals Тепловое расширение кристаллов Pb-=SUB=-1-x-=/SUB=-Cd-=SUB=-x-=/SUB=-Te

2021 ◽  
Vol 55 (12) ◽  
pp. 1216
Author(s):  
М.К. Шаров
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Solid Solutions ◽  
Coefficient Of Thermal Expansion ◽  
Cadmium Content ◽  
Lattice Period ◽  
Linear Coefficient ◽  
X Ray ◽  
Temperature Range

The values of the lattice period and the linear coefficient of thermal expansion (alfa) of Pb1-xCdxTe solid solutions are determined depending on the cadmium content and temperature using high-temperature X-ray diffractometry. Аn increase in the concentration of cadmium in Pb1-xCdxTe in the range x = 0.02–0.08 leads to a significant increase in the linear coefficient of thermal expansion. A change in temperature range T = 293–673 K leads to decrease in the linear coefficient of thermal expansion. Besides, an increase in temperature does not affect the value alfa of the undoped PbTe in the indicated temperature range.

High Temperature Stability of Zirconium Tungstate

2020 ◽  
Vol 993 ◽  
pp. 771-775
Author(s):  
Ping Zhai ◽  
Xiao Feng Duan ◽  
Da Qian Chen
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Solid Phase ◽  
Coefficient Of Thermal Expansion ◽  
Negative Thermal Expansion ◽  
Tungstic Acid ◽  
High Temperature Stability ◽  
Zirconium Tungstate

In this paper, zirconium tungstate ceramic with negative thermal expansion coefficients was prepared from zirconium oxide and tungstic acid by solid phase synthesis and high temperature quenching technique with a sintering temperature of 1200 °C. The phase structure of the material was determined by X ray and the thermal expansion coefficient was measured by dilatometer, while the TG-DTA analysis of the prepared material was also carried out. The results showed that zirconium tungstate with high purity could be obtained by rapid chilled while fired at 1200 °C. The coefficient of thermal expansion at 300 °C was minus 8.5413 × 10-6K-1, which is identical with the theoretical value. The thermal expansion coefficient of the material was negative fired lower than 750 °C, while it was positive fired higher than 750 °C, and this indicates that the decomposition temperature of zirconium tungstate is about 750 °C.

scholarly journals Uncertainties in the Testing of the Coefficient of Thermal Expansion of Overhead Conductors

Energies ◽  
2020 ◽  
Vol 13 (2) ◽  
pp. 411 ◽  
Author(s):  
Miren T. Bedialauneta ◽  
Igor Albizu ◽  
Elvira Fernandez ◽  
A. Javier Mazon
Keyword(s):  
Thermal Expansion ◽  
High Temperature ◽  
Temperature Change ◽  
Coefficient Of Thermal Expansion ◽  
Expansion Process ◽  
Overhead Lines ◽  
Uncertainty Sources ◽  
Line Section ◽  
Conductor Temperature ◽  
Actual Size

Overhead lines can be replaced by high temperature low sag (HTLS) conductors in order to increase their capacity. The coefficients of thermal expansion (CTE) of the HTLS conductors are lower than the CTE of conventional conductors. The utilities and conductor manufacturers usually carry out the verification of the CTE of the overhead conductors in an actual size span. The verification is based on the observation of the change of the conductor length as a result of the conductor temperature change. This process is influenced by the coefficient of thermal expansion to be verified. However, there are other factors that also affect it. This paper analyzes the effect of some of the uncertainty sources in the testing of the coefficient of thermal expansion of the overhead conductors. Firstly, the thermal expansion process is described and the uncertainty sources related to the conductor and the line section are identified. Then, the uncertainty sources and their effect on the CTE testing are quantified.

The Influence of Microstructure, Heat-Treatment and Type of Crystal Lattice of Iron Aluminides on Coefficient of Thermal Expansion

2016 ◽  
Vol 368 ◽  
pp. 41-44 ◽  
Author(s):  
Martin Švec
Keyword(s):  
Phase Transition ◽  
Heat Treatment ◽  
Thermal Expansion ◽  
High Temperature ◽  
Room Temperature ◽  
Coefficient Of Thermal Expansion ◽  
Iron Aluminides ◽  
Sharp Drop ◽  
Structural Application ◽  
Phase Transition Temperatures

The iron aluminides seem to be very perspective materials for high temperature structural application. They have many advantages, but unfortunately also some negative properties – e.g. sharp drop in strength above 600°C or limited ductility at room temperature. These disadvantages can be reduced by alloying of binary alloy by other elements.Present work deals with a study of coefficient of thermal expansion (CTE). It was investigated the influence of microstructure and heat-treatment on the values of CTE. Secondary, it was studied the possibilities, how to determine phase transition temperatures from CTE curves. Influence of type of iron aluminides lattice on CTE values was also examined as well as the influence of addition of alloying elements into binary iron aluminides.

Sign in / Sign up

Export Citation Format

Share Document