scholarly journals Kinetics of adsorption of methylene blue onto activated kolanut pod

2021 ◽  
Vol 12 (2) ◽  
pp. 156-162
Author(s):  
A.S. Muhammad ◽  
M.A. Abdurrahman
Keyword(s):  
Contact Time ◽  
Adsorption Process ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Kinetics Of Adsorption ◽  
Initial Concentration ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Calculated Amount

A batch adsorption process was carried out by optimizing, the effect of contact time (10min to 180min) and initial concentration (5mg/l to150mg/l). The adsorbent was characterized using FTIR spectra and SEM, and the result obtained showed shifting and disappearance of peaks after adsorption. The results of the adsorption kinetics, which includes the correlation coefficient 0.9771 and the agreement between the amount adsorbed experimentally (1.472mg/g) and the calculated amount absorbed(1.196mg/g) revealed that MB was adsorbed satisfactory according to the pseudo second-order kinetic model.

scholarly journals Removal of Cu(II) Ions byLeucaena Leucocephala(Subabul) Seed Pods from Aqueous Solutions

2010 ◽  
Vol 7 (s1) ◽  
pp. S377-S385 ◽  
Author(s):  
A. K. Patil ◽  
V. S. Shrivastava
Keyword(s):  
Leucaena Leucocephala ◽  
Contact Time ◽  
Unit Weight ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Isotherm Equations ◽  
Adsorbent Dose

In this method,Leucaena leucocephalaseed pods (LLSP) have been used for removal of Cu(II) ions from aqueous solution. Batch adsorption experiments were conducted to study the effect of process parameters like pH, contact time initial Cu(II) ions concentration and adsorbent dose. The maximum adsorption of Cu(II) ions onLeucaena leucocephalaseed pods was 94.17% at pH 5. The amount of metal adsorbed per unit weight of adsorbent increases with time and reach equilibrium after 30 minutes of shaking time for the different initial metal concentrations. The Freundlich and Langmuir isotherm equations were applied for the equilibrium adsorption data and the various isotherm parameters were evaluated. The obtained plots were linear as evident fromR2values close to unity. The data agreed very well with the pseudo second-order kinetic model.

Adsorption Characters of Mn2+ onto Palygorskites Modified by 1, 10-Phenanthroline and Triethylamine

2010 ◽  
Vol 178 ◽  
pp. 8-16
Author(s):  
Liang Dong Feng ◽  
Bo Qing Chen ◽  
Ying Ying Shi ◽  
Ying Wei Guo ◽  
Jing Huang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Order Model ◽  
Kinetics Of Adsorption ◽  
Initial Concentration ◽  
Adsorption Capacities ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Kinetics Of

1, 10-phenanthroline and triethylamine modified palygorskites were prepared by microwave irradiation, and characterized with FT-IR technique. The effects of contact time, adsorbent dosage, and pH value of the initial solution on the adsorption characters of Mn2+ were investigated. The adsorption of Mn2+ from aqueous solutions using 1, 10-phenanthroline or triethylamine modified palygorskites were investigated. Experiment results indicated that 1,10-phenanthroline and triethylamine molecules have been successfully grafted to palygorskite. The adsorption was rapid during the first 5 minuts and equilibrium were attained within 60 minutes in the initial concentration of Mn2+ of 50 and 100 mg•L-1, and fast adsorption in the first 10 minutes and slowly increased with the contact time due to the adsorption of palygorskite. The 1, 10-phenanthroline modified palygorskites had higher adsorption capacity than triethylamine modified palygorskites. Compared with natural palggorskites, the Mn2+ ions adsorption capacities of palggorskite modified by 1, 10-phenanthroline or triethylamine were significantly improved. There were less difference in the adsorption capacity between different dasages of 1, 10-phenanthroline modified palygorskites, but the adsorption capacity of Mn2+ adsorbed onto triethylamine modified palygorskites decreased with increasing the dosages. A Lagergren pseudo-second order model best described the kinetics of adsorption of Mn2+ onto the modified palygorskites.

Use of Natural Kaolinite Clay as an Adsorbent to Remove PB(II), CD(II), and CU(II) from Aqueous Solution

2014 ◽  
Vol 805 ◽  
pp. 581-584 ◽  
Author(s):  
Débora Martins Aragão ◽  
Maria de Lara P.M. Arguelho ◽  
Carolina Mangieri Oliveira Prado ◽  
José do Patrocinio Hora Alves
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Northeast Brazil ◽  
Order Kinetic ◽  
Kaolinite Clay ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Natural kaolinite clay collected in the State of Sergipe (northeast Brazil) was used as an adsorbent for the ions Pb2+, Cd2+, and Cu2+present in aqueous solution. Adsorption equilibrium was reached rapidly, enabling use of a contact time of 30 minutes, and maximum adsorption was achieved at pH 7.0. For all three metal ions, the adsorption data could be fitted using the Langmuir isotherm and the adsorption process obeyed a pseudo-second order kinetic model.

scholarly journals A novel activated carbon prepared from grapefruit peel and its application in removal of phenolic compounds

2018 ◽  
Vol 77 (10) ◽  
pp. 2517-2527 ◽  
Author(s):  
Xiao Liu ◽  
Yibei Wan ◽  
Penglei Liu ◽  
Yanzhen Fu ◽  
Weihua Zou
Keyword(s):  
Activated Carbon ◽  
Phenolic Compounds ◽  
Contact Time ◽  
Order Kinetic ◽  
Initial Concentration ◽  
Bet Analysis ◽  
Order Kinetic Model ◽  
Grapefruit Peel ◽  
Pseudo Second Order ◽  
Activating Agent

Abstract The most ideal conditions for preparing activated carbon from grapefruit peel (GPAC) were studied using NH4H2PO4 as a chemical activating agent and the obtained material was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and Brunauer–Emmett–Teller (BET) analysis. The adsorption capacity of the resulting material has been checked using three phenolic compounds (pyrocatechol (CA), 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP)). The adsorption characteristics of phenolic compounds from aqueous solution by GPAC have been investigated as a function of contact time, pH, initial concentration and temperature. The equilibrium experimental data fitted well with Freundlich and Koble–Corrigan isotherms. The adsorption of the three phenolic compounds on GPAC fitted well with pseudo-second-order kinetic model. Different thermodynamic parameters were also evaluated and it was found that the adsorption was spontaneous, feasible and endothermic in nature. Adsorbents were regenerated by 0.1 mol/L NaOH and GPAC could be reused in phenolic compounds removal.

scholarly journals Novel Ag/Kaolin Nanocomposite as Adsorbent for Removal of Acid Cyanine 5R from Aqueous Solution

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Saeedeh Hashemian ◽  
Mohammad Reza Shahedi
Keyword(s):  
Aqueous Solution ◽  
Contact Time ◽  
Adsorption Process ◽  
Alkaline Condition ◽  
Order Kinetic ◽  
Nano Composite ◽  
Order Kinetic Model ◽  
Endothermic Process ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Ag/kaolin nanocomposite was prepared by reduction of Ag+ion with ethanol at alkaline condition on kaolin surface. Nanocomposite was characterized by FTIR, XRD, TEM, and BET methods. Results showed the Ag/kaolin composite has particle size 50 nm. The surface area was increased from kaolin to Ag/kaolin from 1.0215 to 7.409 m2 g−1, respectively. Ag/kaolin nanocomposite was used for adsorption of acid cyanine 5R (AC5R) from aqueous solution. The effect of parameters such as contact time, pH, and mass of nano composite has been investigated. The maximum percentage of adsorption of AC5R was found at pH 3 and contact time of 60 min. The higher percentage removal of AC5R by Ag/kaolin than kaolin can be attributed to catalytic activity of Ag on the surface of kaolin. The experimental data was fitted by pseudo-second-order kinetic model. The adsorption isotherm data could be well interpreted by Langmuir isotherm model. From the results of thermodynamic study, the adsorption process of AC5R onto Ag/kaolin nanocomposite was spontaneous and endothermic process. The process is clean and safe for purifying of water pollution.

scholarly journals Batch study, equilibrium and kinetics of adsorption of naphthalene using waste tyre rubber granules

2014 ◽  
Vol 4 (1) ◽  
Author(s):  
Felix A. Aisien ◽  
Andrew N. Amenaghawon ◽  
Albert I. Adinkwuye
Keyword(s):  
Contact Time ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Kinetics Of Adsorption ◽  
Isotherm Equation ◽  
Operational Variables ◽  
Langmuir Isotherm Equation ◽  
Equilibrium And Kinetics ◽  
Waste Tyre ◽  
Kinetics Of

The potential use of waste tyre rubber granules (WTRG) for the batch adsorption of naphthalene from aqueous solutions was investigated. The effect of various operational variables such as contact time, initial naphthalene concentration, adsorbent dose, size of adsorbent particles, and temperature of solution on the adsorption capacity of WTRG was evaluated. The adsorption of naphthalene by WTRG was a fast kinetic process with an equilibrium contact time of 60 min. A low temperature (5°C), small adsorbent particle size (0.212 mm) and higher adsorbent dosage favored the adsorption process. Results of isotherm studies revealed that adsorption of naphthalene was best described by the Langmuir isotherm equation (R<sup>2</sup>=0.997) while the kinetics of the process was best described by the Lagergren pseudofirst order kinetic equation (R<sup>2</sup>=0.998). This study has demonstrated the suitability of WTRG for the removal of naphthalene from aqueous solution.

scholarly journals Improvement of dyes removal from aqueous solution by Nanosized cobalt ferrite treated with humic acid during coprecipitation

2019 ◽  
Vol 9 (4) ◽  
pp. 281-298 ◽  
Author(s):  
Shaimaa M. Ibrahim ◽  
Abdelrahman A. Badawy ◽  
Hisham A. Essawy
Keyword(s):  
Humic Acid ◽  
Active Sites ◽  
Adsorption Process ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Cobalt Iron ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Co Precipitation

Abstract Highly effective novel adsorbent [CoFe2O4-humic acid(HA)] was synthesized by co-precipitation technique at pH 6 (H6) and pH 8 (H8). XRD, SBET and Zeta-potential measurements were used to study the physicochemical properties of the prepared nanoparticles. XRD results showed that the chemical treatment of CoFe2O4 by HA causes the appearance of carbon as new active sites for adsorption process. Batch adsorption tests were achieved to eliminate anionic remazole-red (RR-133) and cationic methylene blue (MB) dyes. The obtained data showed that H6 and H8 solids calcined at 300 and 500 °C have higher adsorption rate for removing of dye than unmodified cobalt iron mixed oxide. The removal reached 100% after a period of dye contact time 2 min and 30 min for RR and MB, respectively. The uptake of RR and MB was much affected by the pH of dye solution. The pseudo-second-order kinetic model was the most fitted well and the adsorption process followed the Langmuir isotherm model. The adsorption of dye on adsorbent was chemisorption process. The as-prepared adsorbents can be regenerated and reused four times for both dyes. The efficiency of the prepared nano-samples and durability as adsorbent were accomplished. Graphic abstract

scholarly journals Experimental Studies on the Removal of Aluminium Ions from Synthetic Aqueous Solution by Hydroxyapatites

2021 ◽  
Vol 68 (4) ◽  
pp. 821-832
Author(s):  
Doina Humelnicu ◽  
Inga Zinicovscaia ◽  
Ionel Humelnicu ◽  
Maria Ignat
Keyword(s):  
Experimental Studies ◽  
Second Order ◽  
Pluronic F127 ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Kinetics Of Adsorption ◽  
Pluronic P123 ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetics Of

In this work we have presented the results obtained in the adsorption behavior of hydroxyapatite with different treatment towards aluminium ions from synthetic wastewaters. Experiments were performed in batch technique at different pH values, temperatures, sorbent dosage, contact time and initial aluminium concentration. The thermodynamic studies on the adsorption process of aluminium onto hydroxyapatite indicated that the process is spontaneous and endothermic. The Langmuir, Freundlich, Flory-Huggins, Dubinin-Radushkevich and Temkin equilibrium models were applied to the description of experimental data. The adsorption of aluminium follows the Langmuir adsorption isotherm. The kinetics of adsorption was evaluated using the pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models. The rate of aluminium adsorption was successfully described by a pseudo-second-order kinetic model. The obtained results indicated that hydroxyapatite treated with Pluronic P123 surfactant has a higher sorption capacity toward aluminium ions (117.65 mg g−1) than hydroxyapatite treated with Pluronic F127 surfactant (109.89 mg g−1) while untreated hydroxyapatite exhibited the lowest one (104.17 mg g−1).

scholarly journals Comparative Study of Cationic Dye Adsorption Using Industrial Latex Sludge with Sulfonate and Pyrolysis Treatment

2020 ◽  
Vol 12 (23) ◽  
pp. 10048
Author(s):  
Heng Wei ◽  
Jiankun Sun ◽  
Bin Zhang ◽  
Rongzhan Liu
Keyword(s):  
Dye Adsorption ◽  
Raw Material ◽  
Textile Dye ◽  
Order Kinetic ◽  
Kinetics Of Adsorption ◽  
Industrial Solid Waste ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Kinetics Of ◽  
Efficient Adsorbent

Industrial latex sludge as raw material was made into sulfonated latex sludge (SLS) and latex sludge active carbon (LSC) adsorbents by sulfonate and pyrolysis treatment to remove textile dye cationic blue X-GRRL from aqueous solution. The adsorption properties of SLS and LSC for X-GRRL were studied and compared by investigating the experimental parameters such as adsorbents dosage, pH, contact time and initial concentration. The kinetics of adsorption on SLS and LSC followed the pseudo-second-order kinetic model well. The adsorption isotherm and thermodynamic studies were further used to evaluate and compare the adsorption process of X-GRRL on SLS and LSC. The maximum adsorption capacities were 1219.6 mg/g for SLS and 476.2 mg/g for LSC according to the Langmuir model, respectively. These findings not only provide a sustainable strategy to turn industrial solid waste latex sludge into useful material for environment remediation, but also develop an efficient adsorbent for the treatment of dye wastewater.

scholarly journals Modified Cenospheres as an Adsorbent for the Removal of Disperse Dyes

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Markandeya Tiwari ◽  
S. P. Shukla ◽  
D. Mohan ◽  
D. S. Bhargava ◽  
G. C. Kisku
Keyword(s):  
Adsorption Process ◽  
Low Cost ◽  
Agitation Speed ◽  
Disperse Dyes ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Adsorbate Concentration ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Adsorbent Dose

The main objective of this investigation was to use modified cenospheres for the removal of disperse blue 79:1 (DB) and disperse orange 25 (DO) dyes from aqueous solution by batch adsorption process under different conditions (pH, adsorbent dose, adsorbate concentration, agitation speed, contact time, and temperature). Modified cenosphere was capable of removing up to 78% of DB and 81% of DO dyes from aqueous solutions of 40 mg/L dyes concentration. The investigated data was explained by the Langmuir isotherm. The experimental data were found to follow the pseudo-second-order kinetic model. The results of this study suggested that modified cenospheres could be used as a low-cost alternative to expensive adsorbents like activated carbon in wastewater treatment for the removal of disperse dyes.

Sign in / Sign up

Export Citation Format

Share Document