scholarly journals Naringin supplementation affects performance, carcass traits, meat quality and oxidative stability of finishing pigs

2020 ◽  
Vol 50 (1) ◽  
pp. 78-87
Author(s):  
Q Wang ◽  
J Wang ◽  
R.L. Qi ◽  
X.Y. Qiu ◽  
Q Sun ◽  
...  
Keyword(s):  
Oxidative Stability ◽  
Mrna Expression ◽  
Meat Quality ◽  
Carcass Traits ◽  
Carcass Characteristics ◽  
The Other ◽  
Pork Quality ◽  
Finishing Pigs ◽  
Muscle Area ◽  
Eye Muscle

Naringin is a major flavanone derivate that has many important biological functions in animals. However, its effect on pigs is unknown. The aim of this study was to investigate the effect of naringin supplementation on performance, carcass traits, meat quality and oxidative stability in finishing pigs. Ninety-six pigs, with an average initial body weight of 66.2 ± 0.63 kg, were randomly divided into four groups. One group was fed a basal diet without supplementation (control), and the three others were fed diets supplemented with 0.5, 1.0 or 1.5 g naringin /kg DM of feed for 50 days. Each treatment was replicated six times with four pigs per replicate. Feed and water were available ad libitum. The 0.5 g/kg naringin treatment group had an improved loin eye muscle area, reduced serum triglycerides and were leaner compared with the other groups. Pigs in the 1.5 g/kg naringin treatment had higher pH45min values and inosine monophosphate concentrations, and lower MyHC IIb mRNA expression in muscle than the other groups. MyHC IIa mRNA expression was significantly up-regulated in all naringin-supplemented diet groups. Naringin significantly increased superoxide dismutase (SOD) activity and total anti-oxidative capacity in meat, as well as SOD and glutathione peroxidase activity in the liver. These results indicate that the dietary addition of naringin at 0.5 g/kg improved carcass characteristics, while 1.5 g/kg improved the oxidative stability and pork quality in finishing pigs. Keywords: antioxidant capacity; carcass characteristics; naringin-supplemented diets; pork quality

scholarly journals Effect of heat stress on carcass and meat quality of indigenous sheep of Bangladesh

2014 ◽  
Vol 43 (2) ◽  
pp. 147-153 ◽  
Author(s):  
MS Rana ◽  
MA Hashem ◽  
S Akhter ◽  
M Habibullah ◽  
MH Islam ◽  
...  
Keyword(s):  
Heat Stress ◽  
Meat Quality ◽  
Carcass Characteristics ◽  
Muscle Area ◽  
Eye Muscle ◽  
Treatment Groups ◽  
Indigenous Sheep ◽  
Heat Treated ◽  
Significant Difference

The research was conducted to study the effect of heat stress on carcass characteristics and meat quality in indigenous sheep. Nine sheep were divided into three groups which were almost similar in age, sex and weight. Three groups were divided as zero hour (T0), four hours (T4) and eight hours (T8) heat exposure to direct sunlight. During experimental period temperature–humidity index (THI) value was calculated as 27.09 which indicated T4 and T8 groups were subjected to heat stress condition for at least four hours and eight hours respectively every day. Slaughter weight, body length and heart girth had no significant difference among the treatment groups. Dry matter, ash and ether extract had no significant difference (p>0.05) among the treatment groups but crude protein were increased with the increase of heat stress from T0 to T8 group (p<0.05). Drip loss was increased (p<0.05) in non-exposure group than treated groups but there is no significant result (p>0.05) found in pH and cooking loss. Carcass weight and eye muscle area had no significant difference (p>0.05) among the treatment groups but dressing percentage was decreased with the increase of time in heat treated groups (p<0.01). Significant difference (p<0.05) were found in weight of heart, kidney, lung + trachea and pluck between control and heat treated groups. The significant difference (p>0.05) in empty gut was found in gut with content and gut fill in heat treated groups. It can be concluded that heat stress had significant changes on carcass characteristics and meat quality of indigenous sheep.DOI: http://dx.doi.org/10.3329/bjas.v43i2.20717 Bang. J. Anim. Sci. 2014. 43 (2): 147-153

scholarly journals Growth Performance and Carcass Traits Responses to Dried Distillers’ Grain with Solubles Feeding of Growing Awassi Ram Lambs

Animals ◽  
2019 ◽  
Vol 9 (11) ◽  
pp. 954 ◽  
Author(s):  
Safa’ M. Hatamleh ◽  
Belal S. Obeidat
Keyword(s):  
Meat Quality ◽  
Control Diet ◽  
Average Daily Gain ◽  
Carcass Traits ◽  
Quality Parameters ◽  
Muscle Area ◽  
Eye Muscle ◽  
Distillers Grain ◽  
Dried Distillers Grain ◽  
The Impact

This study considers the impact of dried distillers’ grain with solubles (DDGS) in diets of lambs. Randomly; 27 lambs were distributed to one of three diets. Diets were: a control diet (CON; n = 9), a 125 (DDGS125; n = 9) or a 250 g/kg DDGS (DDGS250; n = 9) of dietary dry matter (DM). The lambs were fed using these diets for 91 days. To assess carcass traits; five lambs were randomly selected at the end of the study. No significant differences were detected in intake and digestibility of DM; crude protein and fiber. Average daily gain did not differ among diets. Carcass characteristics did not differ among diets. With the exception of shear force and redness, which were greater in DDGS250 than in DDGS125 and CON diets, meat quality parameters were unaffected. Eye muscle area decreased in DDGS125 than in DDGS250 and CON diet. These results demonstrate that the feeding of lambs on DDGS at 125 or 250 g/kg DM did not have any impact on growth. These diets only had a simple effect on the characteristics of carcass and meat quality. These results suggest that it would be suitable to introduce these feeds into sheep nutrition in the future.

Growth and carcass characteristics of crossbred and straightbred Hereford steers. II. Carcass measurements and composition

1981 ◽  
Vol 32 (1) ◽  
pp. 171 ◽  
Author(s):  
JM Thompson ◽  
R Barlow
Keyword(s):  
Subcutaneous Fat ◽  
Carcass Characteristics ◽  
Allometric Equation ◽  
The Body ◽  
The Other ◽  
Carcass Weight ◽  
Muscle Area ◽  
Eye Muscle ◽  
Fat Thickness ◽  
Breed Crosses

The effect of sire breed on the growth and development of carcass characteristics was examined in 104 steer carcasses, over the weight range of c. 300 to 600 kg liveweight. The carcasses were obtained from 28 straightbred Hereford, 27 Brahman x Hereford, 23 Simmental x Hereford and 26 Friesian x Hereford steers, which were grown on pasture and slaughtered in four groups when the Herefords weighed c. 270, 370, 470 and 570 kg liveweight. Changes in carcass characteristics with weight were examined by using the linear form of the allometric equation (log10Y = log10A+blog10X). As liveweight increased, the proportion of carcass in the body increased (b = 1.152). At the same liveweight, Brahman cross steers had heavier carcasses than the Hereford steers, which were heavier than either the Simmental or Friesian cross steers (P < 0.05). Fat thickness at the 12th-13th rib site, and kidney and channel fat weight both increased at a proportionally faster rate than carcass weight (b = 1.511 and 1 567 respectively). At the same carcass weight, Hereford and Brahman cross carcasses had a greater fat thickness than Simmental and Friesian cross carcasses (P i 0.05). Differences between sire breeds in kidney and channel fat weight were not significant (P > 0.05). C:rcass length and eye muscle area increased at a proportionally slower rate than carcass weight (b = 0.268 and 0.466 respectively). At the same carcass weight, Friesian cross carcasses were longer, and Simmental cross carcasses had a larger eye muscle area than the other breed crosses (P < 0.05). As total side weight increased, the proportions of subcutaneous and intermuscular fatAincreased (b = 1.554 and 1.535 respectively), and the proportions of muscle and bone decreased (b = 0.938 and 0.676 respectively). At the same side weight, the Hereford and Brahman cross carcasses had more subcutaneous fat than the Simmental and Friesian cross carcasses (P < 0.05). The Hereford carcasses had more intermuscular fat than the Simmental cross carcasses, which had more muscle than the other breed crosses (P < 0.05). Friesian cross carcasses had more bone than the Simmental crosses, with Brahman cross and Hereford carcasses having the least bone (P < 0.05). Brahman cross carcasses had a higher conformation score than the Simmental cross and Hereford carcasses, the Friesian cross carcasses having the lowest (P < 0.05). Samples of the M. longissimus from Brahman cross carcasses had a higher Warner-Bratzler shear force than samples from the other breed crosses (P < 0.05).

A COMPARISON OF GROWTH AND CARCASS CHARACTERISTICS OF PUREBRED SHORTHORN AND CROSSBRED BEEF STEERS

1964 ◽  
Vol 44 (3) ◽  
pp. 249-256 ◽  
Author(s):  
M. Hidiroglou ◽  
L. A. Charette ◽  
J. S. Patterson
Keyword(s):  
Growth Rate ◽  
Carcass Traits ◽  
Carcass Characteristics ◽  
Live Weight ◽  
The Other ◽  
Carcass Weight ◽  
Beef Steers ◽  
Eye Muscle

The influence of breed of sire on carcass traits was examined by studying data collected on 134 steers produced by mating Shorthorn cows with Shorthorn, Angus, Hereford, and Charolais bulls. The steers were fed out in two groups: one group was slaughtered at 18 to 23 months as they reached a live weight of 900–1000 lb and the other group at approximately 30 months of age. In each group the steers sired by Charolais bulls gained more rapidly, possessed more bone, produced heavier carcass weight, and showed largest eye muscle measurements. There were no appreciable differences among the crosses within the sire groups represented by the British breeds except that Hereford × Shorthorn surpassed Angus × Shorthorn and Shorthorn in growth rate significantly and for a slight superiority in marbling for the Angus compared with the Shorthorn.

scholarly journals Genetics of meat quality and carcass traits and the impact of tenderstretching in two tropical beef genotypes

2009 ◽  
Vol 49 (6) ◽  
pp. 383 ◽  
Author(s):  
M. L. Wolcott ◽  
D. J. Johnston ◽  
S. A. Barwick ◽  
C. L. Iker ◽  
J. M. Thompson ◽  
...  
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Carcass Traits ◽  
Intramuscular Fat ◽  
Quality Traits ◽  
Muscle Area ◽  
Live Animal ◽  
Eye Muscle ◽  
Meat Quality Traits ◽  
Lower Shear

Meat quality and carcass traits were measured for 2180 feedlot finished Brahman (BRAH) and Tropical Composite (TCOMP) steers to investigate genetic and non-genetic influences on shear force, and other meat quality traits. Genetic and phenotypic correlations were estimated between carcass and meat quality traits, and with live animal measurements collected in steers from weaning to feedlot exit, and their heifer half-sibs up to their first mating, which were managed in Australia’s tropical or subtropical environments. Left sides of carcasses were tenderstretched (hung by the aitch-bone) while right sides were conventionally hung (by the Achilles tendon). Tenderstretching reduced mean shear force by 1.04 kg, and phenotypic variance by 77% of that observed in conventionally hung sides. Genotype differences existed for carcass traits, with TCOMP carcasses significantly heavier, fatter, with greater eye muscle area, and lower retail beef yield than BRAH. TCOMP had lower shear force, and higher percent intramuscular fat. Meat quality and carcass traits were moderately heritable, with estimates for shear force and compression of 0.33 and 0.19 for BRAH and 0.32 and 0.20 for TCOMP respectively. In both genotypes, estimates of heritability for carcass traits (carcass weight, P8 and rib fat depths, eye muscle area and retail beef yield) were consistently moderate to high (0.21 to 0.56). Shear force and compression were genetically correlated with percent intramuscular fat (r g = –0.26 and –0.57, respectively), and meat colour (r g = –0.41 and –0.68, respectively). For TCOMP, lower shear force was genetically related to decreased carcass P8 fat depth (r g = 0.51). For BRAH steers and heifers measured at pasture, fatness traits and growth rates were genetically correlated with shear force, although the magnitude of these relationships varied with time of measurement. Net feed intake was significantly genetically correlated with carcass rib fat depth (r g = 0.49), eye muscle area (r g = –0.42) and retail beef yield (r g = –0.61). These results demonstrate that selection to improve production and carcass traits can impact meat quality traits in tropically adapted cattle, and that genotype specific evaluations will be necessary to accommodate different genetic relationships between meat quality, carcass and live animal traits.

scholarly journals Comparative Physical Characteristics in the Indigenous Nigerian and Imported European Pigs

2021 ◽  
Vol 3 (2) ◽  
pp. 74-87
Author(s):  
B. I. Fetuga ◽  
G. M. Babatunde ◽  
V. A. Oyenuga
Keyword(s):  
Carcass Traits ◽  
Carcass Characteristics ◽  
Live Weight ◽  
Lower Proportion ◽  
Large White ◽  
Muscle Area ◽  
Eye Muscle ◽  
Additional Group ◽  
Indigenous Pigs ◽  
Carcass Conformation

THE Physical carcass characteristics of 100 indigenous Nigerian pigs (IND.) (50 gilts and 50 barrows), and 100 Large White x Landrace pigs with a similar sex ratio were compared. These were slaughtered at either one of five weights, 22.7, 34.0, 45.5, 56.8 or 68 kg live weight, in such a way that 10 gilts and 10 barrows of each breed were slaughtered at each of the predetermined slaughter weights. For the purpose of comparing sexual influences on physical carcass traits in the indigenous pigs carcass data were obtained on an additional group of 50 indigenous boars during the same period as the above it similar Slaughter weights involving similar numbers per slaughter weight. In a third experiment carcass data were collected on 40 pure Large White pigs (LW) (20 gilts and 20 barroWs) and 40 indigenous x Large White pigs (IND.XLW) also made up of 20 gilts and 20 barrows. A comparison was made between these and the data on a similar number of indigenous barrows and gilts. The results indicated highly significantly different (P <0.01). Proportions of lean and fat and significantly (P <0.05) different proportions of bone and skin in the carcasses of IND and LWXLD pig. The LWXLD pigs had more lean, and bone, less fat and skin, than the indigenous pigs. Carcass conformation was also clearly different in both breeds. The indigenous pigs had lower proportion of lean cuts and greater proportion of the fat cuts than the LWXLD pigs at all Slaughter weights. From 22.7 to 68 kg slaughter weights, the IND pigs were shorter, had thicker backfat, higher dressing percentage and smaller loin eye muscle area compared to the LWXLD pigs. Percentages lean, bone skin, ham, loin, shoulder and sum of four lean cuts decreased while percentages fat, fat cuts, trimmed fat and backfat thickness increased with increasing slaughter weights for both breeds. A comparison of carcass traits in the indigenous boars, barrows and gilts showed that the boars were leaner and had superior carcass conformation to the gilts which in turn were leaner than barrows. Crosses between the indigenous pigs and pure large White pigs were superior to the pure indigenous pigs in terms of carcass length, greater proportion of lean to fat and thinner backfat measurements, while they were inferior to the Pure Large White pigs in terms of these measurements.

scholarly journals Carcass Characteristics of the Libyan Purebred Mahali Goat and their Crosses with Damascus and Morcia Granada Goats

2010 ◽  
Vol 15 ◽  
pp. 21 ◽  
Author(s):  
Abdelkareem E. Ahtash ◽  
Abdulla S. Biala ◽  
Aiad F. Magid ◽  
Hamed M. Marhoun
Keyword(s):  
Carcass Characteristics ◽  
Live Weight ◽  
The Other ◽  
Carcass Weight ◽  
Meat Production ◽  
Muscle Area ◽  
Eye Muscle ◽  
Kidney Fat ◽  
Significant Superiority ◽  
Group 1

This study was conducted to evaluate the carcass characteristics of Mahali (M), Damascus (D) and Morcia Granada (G) goats and their crosses. Live weight, carcass weight, dressing-out %, rib eye muscle area, non-carcass components and kidney fat were measured. The results showed significant superiority of Damascus goats in live weight (65.8 kg), carcass weight (34.3 kg), dressing-out %( 52.1%), rib eye muscle areas (22.7 cm²) over the Mahali and Morcia Granada goats. The crossbred group (1/2 M ҳ 1/2 D) was superior in live weight (50 kg), carcass weight (24.2kg), dressing-out %( 48.4%), and rib eye muscle area (21.2cm²) over other crossbreds. The crossbred group (3⁄4D ҳ 1⁄4M) was superior in live weight (61.7kg), carcass weight (31 kg) and rib eye muscle area (21.3cm²) over the other 3⁄4 crossbreds. This study indicated that crossing between Mahali ҳ Damascus breed was beneficial for increasing live weight, carcass weight and meat production. 

scholarly journals Influence of sire line and halothane genotype on growth performance, carcass characteristics, and meat quality in pigs

2000 ◽  
Vol 80 (2) ◽  
pp. 319-327 ◽  
Author(s):  
K. D. Miller ◽  
M. Ellis ◽  
F. K. McKeith ◽  
E. R. Wilson
Keyword(s):  
Meat Quality ◽  
Shear Force ◽  
Carcass Characteristics ◽  
Quality Parameters ◽  
Quality Characteristics ◽  
The Other ◽  
Carcass Quality ◽  
Pork Quality ◽  
Commercially Important ◽  
Progeny Line

Progeny of three commercial sire lines mated to the same halothane negative crossbreed dam line were compared for growth, carcass and meat quality characteristics. Sire line A (halothane reactor) produced halothane carrier progeny; line C was halothane negative and produced negative progeny; line B (a cross between lines A and C) was a halothane carrier line that produced both carrier (BNn) and negative (BNN) progeny within the same litter. Line A pigs grew more slowly (P ≤ 0.05) and consumed less feed (P ≤ 0.05) than the progeny of the other lines (885, 1049, 1057 and 1082 g d−1 and 2.37, 2.82, 2.72 and 2.79 kg d−1 for lines a, BNN, BNn and C respectively). However, gain:feed was similar for all lines. Dressing percentage was similar for lines A, BNn and BNN (77.42, 77.62 and 77.00% respectively) but lower for line C (75.31%: P ≤ 0.05). Line differences for linear carcass measurements, lean cut yield and fat-free lean content were relatively small. Line A had higher shear force than the others (4.32, 3.21, 3.57, and 3.30 kg for A, BNN, BNn and C, respectively; P ≤ 0.05) and lines A and BNn had reduced taste panel tenderness and juiciness (P ≤ 0.05) compared with lines BNN and C. This study highlights commercially important differences between sire lines for pork quality traits. the variation in pork quality within this study resulted from the halothane gene and, potentially, other single genes that affect meat quality parameters. Key words: halothane gene, meat quality, sire line, pigs, carcass quality

Effects of slaughter age on carcass traits and meat quality of crossbred (Duroc × Landrace × Yorkshire) finishing pigs

2021 ◽  
pp. 1-7
Author(s):  
Zhongyang Guo ◽  
Xiaoling Chen ◽  
Daiwen Chen ◽  
Mingzhou Li ◽  
Jingdong Yin ◽  
...  
Keyword(s):  
Meat Quality ◽  
Carcass Traits ◽  
Finishing Pigs ◽  
Slaughter Age
Sign in / Sign up

Export Citation Format

Share Document