scholarly journals Outdoor Thermal Comfort Improvement of Campus Public Space

2021 ◽  
Author(s):  
Damrongsak Rinchumphu ◽  
Non Phichetkunbodee ◽  
Nakarin Pomsurin ◽  
Chawanat Sundaranaga ◽  
Sarote Tepweerakun ◽  
...  
Keyword(s):  
Thermal Comfort ◽  
Public Space ◽  
Thermal Conditions ◽  
Simulation Software ◽  
Outdoor Thermal Comfort ◽  
Base Case ◽  
Comfort Index ◽  
Design Alternatives ◽  
Large Trees ◽  
Field Data Collection

This study focuses on the design of a campus public space, located within the Faculty of Engineering, Chiang Mai University, Thailand. This area faces extreme temperatures, creating uncomfortable outdoor thermal conditions and hindering activities that are expected to support the learning and social cohesion needs of students. To create the best conditions in this space, three design alternatives such as adding a pond, large trees, or shrubs were considered, and the Physiologically Equivalent Temperature (PET) was used to calculate the outdoor thermal comfort index for each alternative. The alternatives were then compared to the base case. The PET can be calculated using the ENVI-met simulation software following the appropriate field data collection and calibration process. The results showed that adding large trees in the south-west area is the best design alternative. The PET for this alternative was 3.17 % lower than the base case. In addition, this design workflow is an effective working model for further outdoor public space designs to meet the constraints of effective sustainable development in any tropical campus area.

scholarly journals Study of Universal Thermal Comfort Index in Hosing Estate Public Space in Bangkok, Thailand

2021 ◽  
Vol 21 (2) ◽  
pp. 10-18
Author(s):  
Pitiwat Wattanachai ◽  
Chawanat Sundaranaga ◽  
Thidarat Kridakorn Na Ayutthaya ◽  
Non Phichetkunbodee ◽  
Damrongsak Rinchumphu
Keyword(s):  
Thermal Comfort ◽  
Public Space ◽  
Public Spaces ◽  
Thermal Reduction ◽  
External Temperature ◽  
Comfort Index ◽  
Large Trees ◽  
Public Areas ◽  
Outdoor Comfort ◽  
Air Circulation

A lower external temperature increases comfort and reduces the chance of heat stress; it can be impacted by the density of the urban area, and this is an important issue for the residents in housing estate developments. Therefore, to sustainably reduce this issue, the external temperature is important to manage for urban public spaces’ development. This article reports the results of studies on increasing thermal comfort in public areas by adding different types of shading into computer programs, Rhinoceros and Grasshopper, to calculate the Universal Thermal Comfort Index (UTCI). Increasing the outdoor comfort can be done by adding shaded areas via large trees that can result in thermal reduction and humidity increase, but they do not obstruct air circulation. The result can be used as a guideline for the design of public spaces in housing estates to meet the outdoor comfort efficiently and support the users’ expectations.

scholarly journals Biomimicry-Based Strategies for Urban Heat Island Mitigation: A Numerical Case Study under Tropical Climate

Biomimetics ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 48
Author(s):  
Kevin Araque ◽  
Paola Palacios ◽  
Dafni Mora ◽  
Miguel Chen Austin
Keyword(s):  
Thermal Comfort ◽  
Urban Heat Island ◽  
Urban Areas ◽  
Outdoor Thermal Comfort ◽  
Base Case ◽  
Heat Island ◽  
Urban Heat ◽  
Historical Heritage ◽  
Pet Index ◽  
Radiant Temperature

In recent years, demographic growth has caused cities to expand their urban areas, increasing the risk of overheating, creating insurmountable microclimatic conditions within the urban area, which is why studies have been carried out on the urban heat island effect (UHI) and its mitigation. Therefore, this research aims to evaluate the cooling potential in the application of strategies based on biomimicry for the microclimate in a historical heritage city of Panama. For this, three case studies (base case, case 1, and case 2) of outdoor thermal comfort were evaluated, in which the Envi-met software was used to emulate and evaluate the thermal performance of these strategies during March (highest temperature month) and October (rainier month). The strategies used were extracted from the contrast of zebra skin, human skin, evaporative cooling, and ant skin. The results showed a reduction of 2.8 °C in the air temperature at 11:00, the radiant temperature decreased by 2.2 °C, and the PET index managed to reduce the thermal comfort indicator among its categories. The importance of thinking based on biomimicry in sustainable strategies is concluded; although significant changes were obtained, high risks of discomfort persist due to the layout and proximity of the building.

ENHANCING THERMAL COMFORT OF RESIDENTIAL BUILDINGS THROUGH A DUAL FUNCTIONAL PASSIVE SYSTEM (SOLAR-WALL)

2021 ◽  
Vol 16 (3) ◽  
pp. 155-177
Author(s):  
Shouib Mabdeh ◽  
Tamer Al Radaideh ◽  
Montaser Hiyari
Keyword(s):  
Thermal Comfort ◽  
Residential Buildings ◽  
Simulation Software ◽  
Design Parameters ◽  
Base Case ◽  
Passive System ◽  
Efficient System ◽  
Dual Functional ◽  
Solar Wall ◽  
New System

ABSTRACT Thermal comfort has a great impact on occupants’ productivity and general well-being. Since people spend 80–90% of their time indoors, developing the tools and methods that enhance the thermal comfort for building are worth investigating. Previous studies have proved that using passive systems like Trombe walls and solar chimneys significantly enhanced thermal comfort in inside spaces despite that each system has a specific purpose within a specific climate condition. Hence, the main purpose of this study is to design and configure a new, dual functional passive system, called a solar wall. The new system combines the Trombe wall and solar chimney, and it can cool or heat based on building needs. Simulation software, DesignBuilder, has been used to configure the Solar Wall, and study its impact on indoor operative temperature for the base case. Using the new system, the simulation results were compared with those obtained in the base case and analyzed to determine the most efficient system design parameters and implementation method. The case that gave the best results for solar wall configuration was triple glazed glass and 0.1 cm copper as an absorber (case 11). The results show that using four units (case D) achieves longer thermal comfort levels: 15 to 24 thermal hours during winter (compared to five hours maximum) and 10 to 19 comfort hours in summer (compared to zero).

ENHANCING THERMAL COMFORT OF RESIDENTIAL BUILDINGS THROUGH DUAL FUNCTIONAL PASSIVE SYSTEM (SOLAR-WALL)

2021 ◽  
Vol 16 (1) ◽  
pp. 139-161
Author(s):  
Shouib Mabdeh ◽  
Tamer Al Radaideh ◽  
Montaser Hiyari
Keyword(s):  
Thermal Comfort ◽  
Residential Buildings ◽  
Simulation Software ◽  
Design Parameters ◽  
Base Case ◽  
Passive System ◽  
Efficient System ◽  
Dual Functional ◽  
Solar Wall ◽  
New System

ABSTRACT Thermal comfort has a great effect on occupants’ productivity and general well-being. Since people spend 80–90% of their time indoors, developing the tools and methods that help in enhancing the thermal comfort for buildings are worth investigating. Previous studies have proved that using passive systems like Trombe walls and solar chimneys significantly enhanced thermal comfort in inside spaces despite that each system has a specific purpose within a specific climate condition. Hence, the main purpose of this study is to design and configure a new dual functional passive system, called a solar wall. The new system combines the Trombe wall and solar chimney, and it can cool or heat based on building needs. Simulation software, DesignBuilder, has been used to configure the Solar Wall and study its impact on indoor operative temperature for the base case. Using the new system, the simulation results were compared with those obtained in the base case and analyzed to determine the most efficient system design parameters and implementation method. The case that gave the best results for solar wall configuration was triple glazed glass and 0.1 cm copper as an absorber (case 11). The results show that using four units (case D) achieves longer thermal comfort levels: 15 to 24 thermal hours during winter (compared to five hours maximum) and 10 to 19 comfort hours in summer (compared to zero).

scholarly journals Thermal Perception in the Mediterranean Area: Comparing the Mediterranean Outdoor Comfort Index (MOCI) to Other Outdoor Thermal Comfort Indices

Energies ◽  
2016 ◽  
Vol 9 (7) ◽  
pp. 550 ◽  
Author(s):  
Iacopo Golasi ◽  
Ferdinando Salata ◽  
Emanuele de Lieto Vollaro ◽  
Massimo Coppi ◽  
Andrea de Lieto Vollaro
Keyword(s):  
Thermal Comfort ◽  
Mediterranean Area ◽  
Outdoor Thermal Comfort ◽  
Thermal Perception ◽  
Comfort Index ◽  
Outdoor Comfort ◽  
The Mediterranean ◽  
Comfort Indices

A FLUIDODINÂMICA COMPUTACIONAL UTILIZADA PARA MAPEAR O CONFORTO TÉRMICO DE SUÍNOS NA FASE DE MATERNIDADE

2017 ◽  
Vol 32 (1) ◽  
pp. 32
Author(s):  
Beatriz Kenickel Nunes ◽  
Silvia Regina Lucas de Souza ◽  
Arilson José de Oliveira Júnior ◽  
Enedy Allan Rodrigues Cordeiro ◽  
Reginaldo Apolinário de Almeida
Keyword(s):  
Thermal Comfort ◽  
Computational Fluid Dynamic ◽  
Cfd Simulation ◽  
Fluid Dynamic ◽  
Thermal Conditions ◽  
Simulation Software ◽  
Santa Cruz ◽  
Facilities Design ◽  
Comfort Condition ◽  
Made In

As observações geradas em estudos sobre instalações de suínos têm demonstrado que o desempenho térmico das instalações comumente utilizadas pelos produtores vem apresentando um quadro de desconforto térmico na fase da maternidade, devido às adaptações construtivas feitas com a finalidade de atender tanto as necessidades da matriz quanto dos leitões. Sendo assim, o objetivo deste trabalho foi utilizar a ferramenta de fluidodinâmica computacional (CFD) para realizar o mapeamento do microambiente de duas instalações de suínos, visando o bem-estar dos animais. As simulações foram obtidas em uma maternidade da Fazenda Experimental Lageado, UNESP, Botucatu/SP e de uma granja comercial localizada em Santa Cruz do Rio Pardo/SP. Para as simulações utilizou-se o software Autodesk® CFD Simulation juntamente com o AutoCAD 3D, para desenho das instalações. As condições de conforto térmico foram analisadas por meio da aplicação do índice de voto médio estimado – PMV. Na instalação comercial simulada observou-se que as aberturas laterais não são suficientes para manter uma condição de conforto térmico, segundo o índice PMV. Com o uso da fluidodinâmica computacional foi possível modificar o ambiente mediante a elevação do seu fluxo de ar, o que demonstrou ser uma solução na diminuição da temperatura do ar e alcance de uma condição de conforto térmico.PALAVRAS-CHAVE: Conforto térmico, bem-estar de suínos, fluidodinâmica computacional, CFD, simuladores. FLUIDODYNAMICS COMPUTATIONAL USED FOR THE MAPPING OF THERMAL CONDITIONS IN INSTALLATION OF SWINE MATERNITIESABSTRACT: Studies have shown that the thermal performance of facilities commonly used by producers has presented an environmental discomfort picture in the maternity phase due to constructive adjustments made in order to meet needs of both piglets and sow. Therefore, this work aimed to use the computational fluid dynamic tool for mapping the microclimate of two facilities, which purpose of improving the animal welfare. The simulations were conducted at experimental farm “Lageado”, UNESP, Botucatu/SP and a commercial facility, located in Santa Cruz do Rio Pardo/SP. For simulations were used the Autodesk® CFD Simulation software along with AutoCAD 3D (facilities design). Thermal comfort conditions were analyzed by means of predicted mean vote – PMV. In simulated commercial facility was observed that side vents are not sufficient to establish a thermal comfort condition, according to PMV. With computational fluid dynamic was possible to change the environment through air flow increase, showing to be a solution in decrease of air temperature and reach of thermal comfort condition.KEYWORDS: Thermal comfort, swine welfare, computational fluid dynamic, CFD, simulators.

scholarly journals Simulation of thermal comfort on public space and buildings around river in Banjarmasin-Indonesia

2022 ◽  
Vol 1212 (1) ◽  
pp. 012008
Author(s):  
A Rahman
Keyword(s):  
Thermal Comfort ◽  
Public Space ◽  
Effective Temperature ◽  
Rural Areas ◽  
Thermal Conditions ◽  
Concrete Construction ◽  
Validation Data ◽  
Wood Construction ◽  
Gathering Place ◽  
The City

Abstract The climate and environmental aspects are one of the things that affect architectural products. The city as a gathering place that interacts for a particular purpose has influenced the shape and visual of the city. The density of buildings in a city has affected the urban microclimate. Urban get hotter than rural areas. Urban planners need to pay attention to several aspects related to the solution to the design of the humid tropics. The concept of greening the city evenly and thoroughly, so that the thermal is not too high that can affect comfort. In this research used Rhinoceros 5, Grasshopper, Ladybug, and ladybug for simulation and validation data of wet bulb temperature on a psychometric chart and CBE Thermal Comfort Tool from ASHRAE-55 standard. The purpose of this study used simulation is to facilitate and predict the thermal conditions of buildings and the environment. This application is also used by researchers and architect designers. Based on the simulation, the indoor maximum effective temperature and standard effective temperature are always uncomfortable zones. The building condition with wooden construction is higher of thermal comfort compared with concrete construction buildings and the wood construction is faster reaches maximum value compared to concrete construction.

scholarly journals Analyzing the Effect of Water Body on the Thermal Environment and Comfort at Indoor and Outdoor Spaces in Tropical University Campus

2021 ◽  
Vol 12 (10) ◽  
pp. 282-288
Author(s):  
Farhadur Reza ◽  
◽  
Shoichi Kojima ◽  
Wataru Ando
Keyword(s):  
Thermal Comfort ◽  
Thermal Environment ◽  
Outdoor Thermal Comfort ◽  
University Campus ◽  
Clothing Insulation ◽  
Comfort Index ◽  
Outdoor Spaces ◽  
Globe Temperature ◽  
And Performance ◽  
University Spaces

Water bodies play a significant role in its surrounding thermal environment. Thermal comfort in university spaces is critical that affects the students’ health and performance as well as the staffs. This study investigated thermal environment and comfort near lakeside and non-lakeside tropical university spaces. Standard Effective Temperature (SET*) have been calculated using recorded air temperature, relative humidity, globe temperature, air velocity, clothing insulation and metabolic rate to evaluate the thermal comfort in outdoor and indoor spaces. The effects of weather parameters have been clearly visible on the comfort index. The calculated SET* values indicate that the outdoor thermal comfort near a lake is much closer to the standard comfort zone than non-lakeside outdoor space. In the case of indoor thermal comfort, however, slightly a different scenario has been observed. To achieve the desirable indoor thermal environment, some design considerations are recommended based on findings.

scholarly journals Outdoor thermal comfort in public space in warm-humid Guayaquil, Ecuador

2017 ◽  
Vol 62 (3) ◽  
pp. 387-399 ◽  
Author(s):  
Erik Johansson ◽  
Moohammed Wasim Yahia ◽  
Ivette Arroyo ◽  
Christer Bengs
Keyword(s):  
Thermal Comfort ◽  
Public Space ◽  
Outdoor Thermal Comfort

Determination of acceptable thermal range in outdoor built environments by various methods

2016 ◽  
Vol 5 (4) ◽  
pp. 352-371 ◽  
Author(s):  
Salman Shooshtarian ◽  
Ian Ridley
Keyword(s):  
Comparative Analysis ◽  
Thermal Comfort ◽  
Thermal Conditions ◽  
Outdoor Thermal Comfort ◽  
Built Environments ◽  
Direct Measure ◽  
Thermal Perception ◽  
Content Type ◽  
Thermal Range ◽  
Indirect Measures

Purpose Assessment of outdoor thermal perception in urban spaces is of particular importance due to its financial, social and ecological consequences. Thermal perception includes four elements: thermal sensation votes (TSV), thermal preference (Tpref), overall thermal comfort (Tc) and thermal acceptability (Taccept). Thermal acceptability can offer a benchmark that specifies the acceptable thermal range (ATR), which is useful for urban planners, designers, and bio-meteorologists. ATR, however, can be defined either using direct or indirect measures. The purpose of this paper is to investigate the validity of the indirect measures of ATR, which are most commonly used in outdoor thermal comfort assessments. Design/methodology/approach This study was conducted in the context of Melbourne, which has an oceanic temperate climate (Cfb). Three sites forming RMIT University City Campus (RUCC) were selected as the case studies, which were located in the heart of Melbourne Central Business District. A field survey was conducted in RUCC during three seasons, from November 2014 (Spring) to May 2015 (Autumn), which consisted of concurrent field measurements and questionnaire surveys from 9:00 a.m. to 5:00 p.m. Findings In total, 1,059 valid questionnaires were collected from the three sites of RUCC. The results of comparative analysis between the different measures of ATR determination showed that the various elements of thermal perceptions expressed the users’ thermal judgements in different ways. Therefore, it was found that the instruction recommended by the thermal comfort standards on the definition of ATR failed to provide an appropriate estimation of ATR for outdoor built environments. The ATR, defined using TSV, therefore, was revised by the direct measure of thermal acceptability. The resulting range showed broader limits in acceptable thermal conditions in RUCC outdoor spaces users. Lastly, the results suggest that in the absence of directly measured acceptability of thermal conditions in field surveys, overall comfort is the most appropriate indirect measure to use. Originality/value Some indoor thermal comfort studies have used the alternatives for defining ATR. However, as the applicability of these four methods is yet to be fully explored in outdoor conditions with large weather variations, it is valuable to conduct a comparative analysis among these methods. This study also intended to understand the dynamics of comfort range under non-steady and non-uniform outdoor conditions. The resultant outcome has provided information on the relationship between different measures of thermal perceptions. Ultimately, this research aimed to explore the extent to which the indirect measures of acceptability are considered as a reliable source of information compared to the direct measure.

Sign in / Sign up

Export Citation Format

Share Document