Open-Source Antenna Pattern Validation using FEKO

2021 ◽  
Vol 35 (11) ◽  
pp. 1360-1361
Author(s):  
Christian Hearn
Keyword(s):  
Open Source ◽  
Measurement System ◽  
Position Control ◽  
Low Cost ◽  
Antenna Pattern ◽  
Undergraduate Level ◽  
Antenna Theory ◽  
Software Defined Radios ◽  
Arduino Microcontroller ◽  
Pattern Validation

An open-source antenna pattern measurement system comprised of software-defined radios (SDRs), standard PVC tubing, and 3-D printer components measures the radiation patterns of student-built prototype antennas. Position control is realized using an Arduino microcontroller. Measured principal plane gain patterns for two antenna prototypes are compared to (FEKO) simulated results. The low-cost, open-source nature of the measurement system is ideal for undergraduate-level investigation of antenna theory and measurement.

scholarly journals Development of a Low-Cost Open-Source Measurement System for Joint Angle Estimation

Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6477
Author(s):  
Túlio Fernandes de Almeida ◽  
Edgard Morya ◽  
Abner Cardoso Rodrigues ◽  
André Felipe Oliveira de Azevedo Dantas
Keyword(s):  
Open Source ◽  
Measurement System ◽  
Joint Angle ◽  
Low Cost ◽  
Ground Truth ◽  
Percentage Error ◽  
Angle Estimation ◽  
Adult Individual ◽  
Average Percentage ◽  
Real Scenario

The use of inertial measurement units (IMUs) is a low-cost alternative for measuring joint angles. This study aims to present a low-cost open-source measurement system for joint angle estimation. The system is modular and has hardware and software. The hardware was developed using a low-cost IMU and microcontroller. The IMU data analysis software was developed in Python and has three fusion filters: Complementary Filter, Kalman Filter, and Madgwick Filter. Three experiments were performed for the proof of concept of the system. First, we evaluated the knee joint of Lokomat, with a predefined average range of motion (ROM) of 60∘. In the second, we evaluated our system in a real scenario, evaluating the knee of a healthy adult individual during gait. In the third experiment, we evaluated the software using data from gold standard devices, comparing the results of our software with Ground Truth. In the evaluation of the Lokomat, our system achieved an average ROM of 58.28∘, and during evaluation in a real scenario it achieved an average ROM of 44.62∘. In comparing our software with Ground Truth, we achieved a root-mean-square error of 0.04 and a mean average percentage error of 2.95%. These results encourage the use of this system in other scenarios.

Rapid mapping accuracy assessment using low-cost UAV and open-source Structure from Motion

2020 ◽  
Vol 52 ◽  
pp. 55-61
Author(s):  
Ettore Potente ◽  
Cosimo Cagnazzo ◽  
Alessandro Deodati ◽  
Giuseppe Mastronuzzi
Keyword(s):  
Open Source ◽  
Structure From Motion ◽  
Accuracy Assessment ◽  
Low Cost ◽  
Mapping Accuracy ◽  
Rapid Mapping ◽  
Source Structure

PyDOSS: An open-source Python-based communicable disease outbreak surveillance system designed and used in a COVID-19 community care facility (Preprint)

2020 ◽  
Author(s):  
Andrew Fang ◽  
Jonathan Kia-Sheng Phua ◽  
Terrence Chiew ◽  
Daniel De-Liang Loh ◽  
Lincoln Ming Han Liow ◽  
...  
Keyword(s):  
Open Source ◽  
Surveillance System ◽  
Community Care ◽  
Communicable Disease ◽  
Low Cost ◽  
Real Life ◽  
Disease Outbreak ◽  
Disease Spread ◽  
Healthcare Team ◽  
Increased Risk

BACKGROUND During the Coronavirus Disease 2019 (COVID-19) outbreak, community care facilities (CCF) were set up as temporary out-of-hospital isolation facilities to contain the surge of cases in Singapore. Confined living spaces within CCFs posed an increased risk of communicable disease spread among residents. OBJECTIVE This inspired our healthcare team managing a CCF operation to design a low-cost communicable disease outbreak surveillance system (CDOSS). METHODS Our CDOSS was designed with the following considerations: (1) comprehensiveness, (2) efficiency through passive reconnoitering from electronic medical record (EMR) data, (3) ability to provide spatiotemporal insights, (4) low-cost and (5) ease of use. We used Python to develop a lightweight application – Python-based Communicable Disease Outbreak Surveillance System (PyDOSS) – that was able perform syndromic surveillance and fever monitoring. With minimal user actions, its data pipeline would generate daily control charts and geospatial heat maps of cases from raw EMR data and logged vital signs. PyDOSS was successfully implemented as part of our CCF workflow. We also simulated a gastroenteritis (GE) outbreak to test the effectiveness of the system. RESULTS PyDOSS was used throughout the entire duration of operation; the output was reviewed daily by senior management. No disease outbreaks were identified during our medical operation. In the simulated GE outbreak, PyDOSS was able to effectively detect an outbreak within 24 hours and provided information about cluster progression which could aid in contact tracing. The code for a stock version of PyDOSS has been made publicly available. CONCLUSIONS PyDOSS is an effective surveillance system which was successfully implemented in a real-life medical operation. With the system developed using open-source technology and the code made freely available, it significantly reduces the cost of developing and operating CDOSS and may be useful for similar temporary medical operations, or in resource-limited settings.

scholarly journals Implementation of a Six-Layer Smart Factory Architecture with Special Focus on Transdisciplinary Engineering Education

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2944
Author(s):  
Benjamin James Ralph ◽  
Marcel Sorger ◽  
Benjamin Schödinger ◽  
Hans-Jörg Schmölzer ◽  
Karin Hartl ◽  
...  
Keyword(s):  
Open Source ◽  
User Interfaces ◽  
Industrial Revolution ◽  
Low Cost ◽  
Material Behavior ◽  
Sensor Data ◽  
Management Tool ◽  
Special Focus ◽  
Programming Environments ◽  
Metal Processing

Smart factories are an integral element of the manufacturing infrastructure in the context of the fourth industrial revolution. Nevertheless, there is frequently a deficiency of adequate training facilities for future engineering experts in the academic environment. For this reason, this paper describes the development and implementation of two different layer architectures for the metal processing environment. The first architecture is based on low-cost but resilient devices, allowing interested parties to work with mostly open-source interfaces and standard back-end programming environments. Additionally, one proprietary and two open-source graphical user interfaces (GUIs) were developed. Those interfaces can be adapted front-end as well as back-end, ensuring a holistic comprehension of their capabilities and limits. As a result, a six-layer architecture, from digitization to an interactive project management tool, was designed and implemented in the practical workflow at the academic institution. To take the complexity of thermo-mechanical processing in the metal processing field into account, an alternative layer, connected with the thermo-mechanical treatment simulator Gleeble 3800, was designed. This framework is capable of transferring sensor data with high frequency, enabling data collection for the numerical simulation of complex material behavior under high temperature processing. Finally, the possibility of connecting both systems by using open-source software packages is demonstrated.

scholarly journals Induction of Neural Plasticity Using a Low-Cost Open Source Brain-Computer Interface and a 3D-Printed Wrist Exoskeleton

Sensors ◽  
2021 ◽  
Vol 21 (2) ◽  
pp. 572
Author(s):  
Mads Jochumsen ◽  
Taha Al Muhammadee Janjua ◽  
Juan Carlos Arceo ◽  
Jimmy Lauber ◽  
Emilie Simoneau Buessinger ◽  
...  
Keyword(s):  
Open Source ◽  
Neural Plasticity ◽  
Motor Evoked Potentials ◽  
Low Cost ◽  
True Positive Rate ◽  
Positive Rate ◽  
3D Printed ◽  
Major Factors ◽  
And Control ◽  
Bci System

Brain-computer interfaces (BCIs) have been proven to be useful for stroke rehabilitation, but there are a number of factors that impede the use of this technology in rehabilitation clinics and in home-use, the major factors including the usability and costs of the BCI system. The aims of this study were to develop a cheap 3D-printed wrist exoskeleton that can be controlled by a cheap open source BCI (OpenViBE), and to determine if training with such a setup could induce neural plasticity. Eleven healthy volunteers imagined wrist extensions, which were detected from single-trial electroencephalography (EEG), and in response to this, the wrist exoskeleton replicated the intended movement. Motor-evoked potentials (MEPs) elicited using transcranial magnetic stimulation were measured before, immediately after, and 30 min after BCI training with the exoskeleton. The BCI system had a true positive rate of 86 ± 12% with 1.20 ± 0.57 false detections per minute. Compared to the measurement before the BCI training, the MEPs increased by 35 ± 60% immediately after and 67 ± 60% 30 min after the BCI training. There was no association between the BCI performance and the induction of plasticity. In conclusion, it is possible to detect imaginary movements using an open-source BCI setup and control a cheap 3D-printed exoskeleton that when combined with the BCI can induce neural plasticity. These findings may promote the availability of BCI technology for rehabilitation clinics and home-use. However, the usability must be improved, and further tests are needed with stroke patients.

scholarly journals A Nonlinear Magnetic Stabilization Control Design for an Externally Manipulated DC Motor: An Academic Low-Cost Experimental Platform

Machines ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 101
Author(s):  
Leonardo Acho
Keyword(s):  
Hall Effect ◽  
Position Control ◽  
Low Cost ◽  
Time Derivative ◽  
Control Design ◽  
Dc Motor ◽  
Flexible Beam ◽  
Experimental Platform ◽  
Hall Effect Sensor ◽  
Vibrational Control

The main objective of this paper is to present a position control design to a DC-motor, where the set-point is externally supplied. The controller is conceived by using vibrational control theory and implemented by just processing the time derivative of a Hall-effect sensor signal. Vibrational control is robust against model uncertainties. Hence, for control design, a simple mathematical model of a DC-Motor is invoked. Then, this controller is realized by utilizing analog electronics via operational amplifiers. In the experimental set-up, one extreme of a flexible beam attached to the motor shaft, and with a permanent magnet fixed on the other end, is constructed. Therefore, the control action consists of externally manipulating the flexible beam rotational position by driving a moveable Hall-effect sensor that is located facing the magnet. The experimental platform results in a low-priced device and is useful for teaching control and electronic topics. Experimental results are evidenced to support the main paper contribution.

Sign in / Sign up

Export Citation Format

Share Document