scholarly journals Investigation of Wind Energy Potential at Selected Locations in the Volta Region of Ghana

2020 ◽  
Vol 1 (1) ◽  
pp. 12-18
Author(s):  
Gabriel Nii Laryea ◽  
Kwabena A. Otu-Danquah
Keyword(s):  
Power Systems ◽  
Wind Energy ◽  
Weibull Distribution ◽  
Wind Power ◽  
Power Density ◽  
International System ◽  
Small Scale ◽  
Wind Power Density ◽  
Wind Potential ◽  
Volta Region

The cost of extending electrical power systems to remote areas is expensive and the option is to decentralise small scale energy power systems that could meet the demand in those areas. Wind potential at selected locations in Ghana has been studied for wind energy purpose since there is an increase in socio-economic development in the country. Four (4) of the three-cup anemometers and data-loggers were installed on a 20-m and 30m masts at Amedzofe, Anloga, Areeba-Nkwanta and Kue-Nkwanta (all in the Volta region). The recorded data were analyzed using STATISTICAL software and calculations were made to obtain the Weibull distribution two-parameters and prediction for hourly, monthly mean wind speeds and mean wind power densities were predicted at 50 m above ground level. Among the selected sites, the mean wind power density of Amedzofe and Anloga fell into Classes 3 and 6 of the commercially international system of wind classification respectively, while Areeba-Nkwanta and Kue-Nkwanta fell into Class 2. Anloga is therefore a suitable site for wind power generation to serve the community. Keywords: Wind power potential; Wind atlas analysis and application program (WAsP); Weibull distribution; Wind speed; Wind power density.

scholarly journals Wind potential estimation and proposed energy production in Southern Punjab using Weibull probability density function and surface measured data

2020 ◽  
pp. 014459872092074 ◽  
Author(s):  
Muhammad Sumair ◽  
Tauseef Aized ◽  
Syed Asad Raza Gardezi ◽  
Syed Ubaid Ur Rehman ◽  
Syed Muhammad Sohail Rehman
Keyword(s):  
Wind Speed ◽  
Energy Density ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Energy Production ◽  
Economic Assessment ◽  
Weibull Model ◽  
Wind Power Density ◽  
Wind Potential

Current work focusses on the wind potential assessment in South Punjab. Eleven locations from South Punjab have been analyzed using two-parameter Weibull model (with Energy Pattern Factor Method to estimate Weibull parameters) and five years (2014–2018) hourly wind data measured at 50 m height and collected from Pakistan Meteorological Department. Techno-economic analysis of energy production using six different turbine models was carried out with the purpose of presenting a clear picture about the importance of turbine selection at particular location. The analysis showed that Rahim Yar Khan carries the highest wind speed, highest wind power density, and wind energy density with values 4.40 ms−1, 77.2 W/m2 and 677.76 kWh/m2/year, respectively. On the other extreme, Bahawalnagar observes the least wind speed i.e. 3.60 ms−1 while Layyah observes the minimum wind power density and wind energy density as 38.96 W/m2 and 352.24 kWh/m2/year, respectively. According to National Renewable Energy Laboratory standards, wind potential ranging from 0 to 200 W/m2 is considered poor. Economic assessment was carried out to find feasibility of the location for energy harvesting. Finally, Polar diagrams drawn to show the optimum wind blowing directions shows that optimum wind direction in the region is southwest.

scholarly journals The Investigation of Wind Energy Potential in Order to Estimate Power Plants in Baladeh Mazandaran, Iran

2012 ◽  
pp. 29-33
Author(s):  
S. Asghar Gholamian ◽  
S. Bagher Soltani ◽  
R. Ilka
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Power Plants ◽  
Weather Station ◽  
Energy Potential ◽  
Wind Power Density ◽  
Synoptic Weather ◽  
Wind Potential

First step for achieving wind energy is to locate points with appropriate wind power density in a country. Wind data which are recorded in a synoptic weather station, are the best way to study the wind potential of an area. In this paper wind speed period of Baladeh synoptic weather station is studied, since it has the maximum average of wind speed among 15 stations of the MAZANDARAN Province. Weibull factors k and c are calculated for 40 months from September 2006 to December 2009 and wind power density is determined based on these data. The total average of factors k and c for a height for 50 m are 1.442 m/s and 5.1256 respectively. By using the average of factors, wind power density in 50 m height will be 147.40 watt/m2 which is categorized as weak potential in wind class. However by monthly investigation it is shown that with a 50 m wind, this station can be put in medium class in hot months of the year.

scholarly journals Performance Evaluation of Wind Turbines on the basis of Power Generation

2019 ◽  
Vol 8 (2) ◽  
pp. 4396-4399
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Mathematical Formulation ◽  
Scale Up ◽  
Electricity Sector ◽  
Total Power ◽  
Small Scale ◽  
Wind Power Density

Wind energy is one of the promising solution for future demand and need of energy. Main application of wind energy is in electricity sector. India is having potential for wind installation which is not yet fully explored. This paper compares the results from test rig small scale wind turbine and scale up data for different sizes of turbine as power from small size turbine was very low. A mathematical formulation for wind power is developed for finding total power from the available wind at certain speed. Three factors considered for analysis of three responses. Factors are Wind Speed, Rotor diameter and Swept area for getting response for wind power, torque and wind power density. For different wind speed and different rotor diameter wind power, torque and wind power density calculations done. Response surface method is used to design the experiments and ANOVA (Analysis of Variance) is used to analyze that experiment results are significant or not. Wind data analysis shows that wind speed gives a fairly good response in the range of wind speed 8m/s to 12m/s in practical grounds.

scholarly journals Offshore Wind Energy Resource in the Kingdom of Morocco: Assessment of the Seasonal Potential Variability Based on Satellite Data

2020 ◽  
Vol 9 (1) ◽  
pp. 31
Author(s):  
Aïssa Benazzouz ◽  
Hassan Mabchour ◽  
Khalid El Had ◽  
Bendahhou Zourarah ◽  
Soumia Mordane
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Satellite Data ◽  
Average Power ◽  
Project Planning ◽  
Offshore Wind ◽  
Offshore Wind Energy ◽  
Wind Power Density ◽  
Wind Potential

This study provides a first estimate of the offshore wind power potential along the Moroccan Atlantic shelf based on remotely sensed data. An in-depth knowledge of wind potential characteristics allows assessment of the offshore wind energy project. Based on consistent daily satellite data retrieved from the Advanced Scatterometer (ASCAT) spanning the period from 2008 to 2017, the seasonal wind characteristics were statistically analyzed using the climatological Weibull distribution functions and an assessment of the Moroccan potential coastal wind energy resources was qualitatively analyzed across a range of sites likely to be suitable for possible exploitation. Also, an atlas of wind power density (WPD) at a height of 80 m was provided for the whole Moroccan coast. An examination of the bathymetrical conditions of the study area was carried out since bathymetry is among the primary factors that need to be examined with the wind potential during offshore wind project planning. The results were presented based on the average wind intensity and the prevailing direction, and also the wind power density was shown at monthly, seasonal and interannual time scale. The analysis indicated that the coastal wind regime of the southern area of Morocco has the greatest energy potential, with an average power density which can reach in some places a value around 450 W/m2 at heights of 10 m and 80 m above sea level (a.s.l) (wind turbine hub height) more particularly in the south of the country.

scholarly journals Combining QuickSCAT wind data and Landsat ETM+ images to evaluate the offshore wind power resource of East Vietnam Sea

2020 ◽  
Vol 20 (2) ◽  
pp. 143-153
Author(s):  
Nguyen Xuan Tung ◽  
Do Huy Cuong ◽  
Bui Thi Bao Anh ◽  
Nguyen Thi Nhan ◽  
Tran Quang Son
Keyword(s):  
Power Generation ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Geographical Location ◽  
Wind Power Generation ◽  
Offshore Wind ◽  
Wind Data ◽  
Power Capacity ◽  
Wind Power Density

Since the East Vietnam Sea has an advantageous geographical location and rich natural resources, we can develop and manage islands and reefs in this region reasonably to declare national sovereignty. Based on 1096 scenes of QuikSCAT wind data of 2006–2009, wind power density at 10 m hight is calculated to evaluate wind energy resources of the East Vietnam Sea. With a combination of wind power density at 70 m hight calculated according to the power law of wind energy profile and reef flats extracted from 35 scenes of Landsat ETM+ images, installed wind power capacity of every island or reef is estimated to evaluate wind power generation of the East Vietnam Sea. We found that the wind power density ranges from levels 4–7, so that the wind energy can be well applied to wind power generation. The wind power density takes on a gradually increasing trend in seasons. Specifically, the wind power density is lower in spring and summer, whereas it is higher in autumn and winter. Among islands and reefs in the East Vietnam Sea, the installed wind power capacity of Hoang Sa archipelago is highest in general, the installed wind power capacity of Truong Sa archipelago is at the third level. The installed wind power capacity of Discovery Reef, Bombay Reef, Tree island, Lincoln island, Woody Island of Hoang Sa archipelago and Mariveles Reef, Ladd Reef, Petley Reef, Cornwallis South Reef of Truong Sa archipelago is relatively high, and wind power generation should be developed on these islands first.

scholarly journals Assessment of Wind Energy for Nevada Using Towers and Mesoscale Modeling

2007 ◽  
Author(s):  
Darko Koracin ◽  
Richard L. Reinhardt ◽  
Marshall B. Liddle ◽  
Travis McCord ◽  
Domagoj Podnar ◽  
...  
Keyword(s):  
High Resolution ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Mesoscale Model ◽  
Horizontal Resolution ◽  
Mesoscale Modeling ◽  
Annual Cycles ◽  
Wind Power Density ◽  
Mountainous Regions

The main objectives of the study were to support wind energy assessment for all of Nevada by providing two annual cycles of high-resolution mesoscale modeling evaluated by data from surface stations and towers, estimating differences between these annual cycles and standard wind maps, and providing wind and wind power density statistics at elevations relevant to turbine operations. In addition to the 65 existing Remote Automated Weather Stations in Nevada, four 50-m-tall meteorological towers were deployed in western Nevada to capture long-term wind characteristics and provide database input to verify and improve modeling results. The modeling methodology using Mesoscale Model 5 (MM5) was developed to provide wind and wind power density estimates representing mesoscale effects that include actual synoptic forcing during the two annual cycles (horizontal resolution on the order of 2 and 3 km). The results from the two annual simulation cycles show similar wind statistics with an average difference of less than 100 W/m2. The available TrueWind results for the wind power density at 50 m show greater values of wind power density compared to both MM5-simulated annual cycles for most of the area. However, mainly in the Sierras and the mountainous regions of southern and eastern Nevada, the MM5 simulations indicate greater values for wind power density. The results of this study suggest that the synthesis of the data from a network of tower observations and high-resolution mesoscale modeling is a crucial tool for assessing the wind power density in Nevada and, more generally, other topographically developed areas.

Assessment of wind energy potential and characteristics in Qatar for clean electricity generation

2021 ◽  
pp. 0309524X2110438
Author(s):  
Carlos Méndez ◽  
Yusuf Bicer
Keyword(s):  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Rose ◽  
Energy Potential ◽  
Wind Power Density ◽  
Wind Speeds ◽  
Wind Energy Potential

The present study analyzes the wind energy potential of Qatar, by generating a wind atlas and a Wind Power Density map for the entire country based on ERA-5 data with over 41 years of measurements. Moreover, the wind speeds’ frequency and direction are analyzed using wind recurrence, Weibull, and wind rose plots. Furthermore, the best location to install a wind farm is selected. The results indicate that, at 100 m height, the mean wind speed fluctuates between 5.6054 and 6.5257 m/s. Similarly, the Wind Power Density results reflect values between 149.46 and 335.06 W/m2. Furthermore, a wind farm located in the selected location can generate about 59.7437, 90.4414, and 113.5075 GWh/y electricity by employing Gamesa G97/2000, GE Energy 2.75-120, and Senvion 3.4M140 wind turbines, respectively. Also, these wind farms can save approximately 22,110.80, 17,617.63, and 11,637.84 tons of CO2 emissions annually.

scholarly journals Assessment of wind energy potential across varying topographical features of Tamil Nadu, India

2019 ◽  
Vol 38 (1) ◽  
pp. 175-200 ◽  
Author(s):  
Shafiqur Rehman ◽  
Narayanan Natarajan ◽  
Mangottiri Vasudevan ◽  
Luai M Alhems
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Tamil Nadu ◽  
High Energy ◽  
Energy Potential ◽  
Annual Average ◽  
Wind Power Density ◽  
Wind Energy Potential

Wind energy is one of the abundant, cheap and fast-growing renewable energy sources whose intensive extraction potential is still in immature stage in India. This study aims at the determination and evaluation of wind energy potential of three cities located at different elevations in the state of Tamil Nadu, India. The historical records of wind speed, direction, temperature and pressure were collected for three South Indian cities, namely Chennai, Erode and Coimbatore over a period of 38 years (1980-2017). The mean wind power density was observed to be highest at Chennai (129 W/m2) and lowest at Erode (76 W/m2) and the corresponding mean energy content was highest for Chennai (1129 kWh/m2/year) and lowest at Erode (666 kWh/m2/year). Considering the events of high energy-carrying winds at Chennai, Erode and Coimbatore, maximum wind power density were estimated to be 185 W/m2, 190 W/m2 and 234 W/m2, respectively. The annual average net energy yield and annual average net capacity factor were selected as the representative parameters for expressing strategic wind energy potential at geographically distinct locations having significant variation in wind speed distribution. Based on the analysis, Chennai is found to be the most suitable site for wind energy production followed by Coimbatore and Erode.

scholarly journals An Assessment of Wind Energy Potential for the Three Topographic Regions of Eritrea

Energies ◽  
2020 ◽  
Vol 13 (7) ◽  
pp. 1846 ◽  
Author(s):  
Teklebrhan Negash ◽  
Erik Möllerström ◽  
Fredric Ottermo
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Power ◽  
Power Density ◽  
Coastal Region ◽  
Energy Potential ◽  
Wind Power Density ◽  
Prevailing Wind Direction ◽  
Central Highland ◽  
Wind Energy Potential

This paper presents the wind energy potential and wind characteristics for 25 wind sites in Eritrea, based on wind data from the years 2000–2005. The studied sites are distributed all over Eritrea, but can roughly be divided into three regions: coastal region, western lowlands, and central highlands. The coastal region sites have the highest potential for wind power. An uncertainty, due to extrapolating the wind speed from the 10-m measurements, should be noted. The year to year variations are typically small and, for the sites deemed as suitable for wind power, the seasonal variations are most prominent in the coastal region with a peak during the period November–March. Moreover, Weibull parameters, prevailing wind direction, and wind power density recalculated for 100 m above ground are presented for all 25 sites. Comparing the results to values from the web-based, large-scale dataset, the Global Wind Atlas (GWA), both mean wind speed and wind power density are typically higher for the measurements. The difference is especially large for the more complex-terrain central highland sites where GWA results are also likely to be more uncertain. The result of this study can be used to make preliminary assessments on possible power production potential at the given sites.

scholarly journals Evaluation of Wind Potential for the Generation of Electricity in Aliero, Kebbi State

2020 ◽  
pp. 1-7
Author(s):  
A. A. Yahaya ◽  
I. M. Bello ◽  
N. Mudassir ◽  
I. Mohammed ◽  
M. I. Mukhtar
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Density ◽  
Horizontal Wind ◽  
Average Wind Speed ◽  
Wind Power Density ◽  
North East ◽  
Average Wind ◽  
Wind Potential

One of the major developments in the technology today is the wind turbine that generates electricity and feed it directly to the grid which is used in many part of the world. The main purpose of this work is to determine the wind potential for electricity generation in Aliero, Kebbi state. Five years Data (2014-2018) was collected from the metrological weather station (Campell Scientific Model), the equipment installed at Kebbi State University of Science And Technology Aliero The data was converted to monthly and annual averages, and compared with the threshold average wind speed values that can only generate electricity in both vertical and horizontal wind turbines. The highest average wind speed 2.81 m/s was obtained in the month of January and the minimum average wind speed of 1.20 m/s in the month of October. Mean annual wind speed measured in the study area shows that there has been an increase in the wind speed from 2014 which peaked in 2015 and followed by sudden decrease to a minimum seasonal value in the year 2016. The highest wind direction is obtained from the North North-East (NNE) direction. From the results of wind power density it shows that we have highest wind power density in month of January and December with  0.8635 w/ m2 and 0.8295 w/ m2 respectively, while lowest wind power density in the month of October and September with 0.6780 w/ m2 and 0.6575 w/ m2  respectively. Result of the type Wind Turbine to be selected in the study area shows that the site is not viable for power generation using a horizontal wind turbine but the vertical wind turbine will be suitable for the generation of electricity.

Sign in / Sign up

Export Citation Format

Share Document