scholarly journals Effect of Backstay on Tall Structure with Podium Structure

2021 ◽  
pp. 175-183
Author(s):  
Kishan B. Champaneriya ◽  
Vishal B. Patel ◽  
Atul N. Desai
Keyword(s):  
Sensitivity Analysis ◽  
Shear Force ◽  
Tall Building ◽  
Force Distribution ◽  
Structural Elements ◽  
Lateral Loads ◽  
Diaphragm Thickness ◽  
Lateral Resistance ◽  
Tall Structure ◽  
The Impact

In a multi-functional tall building, generally the building has a more extensive plan area and higher lateral resistance at the lower story level than the above story levels. So, the scope of this study is to understand the realistic behavior of such structures under lateral loads considering the backstay effect as per IS: 16700(2017). A Sensitivity Analysis was performed as per IS: 16700(2017) provisions by considering the stiffness parameters given in code to understand the changes in the shear force distribution among structural elements when the tower and Podium are modeled together. The changes in the force distribution are compared with the structure without the backstay effect. At the podium-tower interface level, the amount of backstay forces developed is also presented in this paper, along with the impact on backstay forces with changes in the lateral resistances by changing floor diaphragm thickness and by changing the podium area.

Influence of the distribution of the shear walls on the seismic response of the buildings

2020 ◽  
Vol 15 (1) ◽  
pp. 37-44
Author(s):  
El Mehdi Echebba ◽  
Hasnae Boubel ◽  
Oumnia Elmrabet ◽  
Mohamed Rougui
Keyword(s):  
Structural Analysis ◽  
Seismic Response ◽  
Natural Frequency ◽  
Structural Design ◽  
Structural Response ◽  
Shear Walls ◽  
Structural Elements ◽  
Analysis Software ◽  
Ansys Apdl ◽  
The Impact

Abstract In this paper, an evaluation was tried for the impact of structural design on structural response. Several situations are foreseen as the possibilities of changing the distribution of the structural elements (sails, columns, etc.), the width of the structure and the number of floors indicates the adapted type of bracing for a given structure by referring only to its Geometric dimensions. This was done by studying the effect of the technical design of the building on the natural frequency of the structure with the study of the influence of the distribution of the structural elements on the seismic response of the building, taking into account of the requirements of the Moroccan earthquake regulations 2000/2011 and using the ANSYS APDL and Robot Structural Analysis software.

What's Left of the Law of Integration?

2018 ◽  
Author(s):  
Julio Baquero Cruz
Keyword(s):  
International Law ◽  
Fundamental Rights ◽  
Structural Elements ◽  
The European Union ◽  
Difficult Situation ◽  
Court Of Justice ◽  
Structural Connections ◽  
The Law ◽  
Constitutional Pluralism ◽  
The Impact

This book discusses the impact of the difficult situation the European Union is currently going through on some structural elements of its legal order, looking for symptoms of decay, exploring examples of resistance, and assessing its overall state of health. The original choices made by the drafters of the Treaties and by the Court of Justice are put in their proper historical perspective, understanding Union law as a tool of civilization, and explaining its current problems, at least in part, as a consequence of the waning of the initial impetus behind integration. The concrete themes to be explored are the following: primacy, the national resistance to it and constitutional pluralism; the preliminary rulings procedure; Union citizenship, equality, and human dignity; the scope of the Charter and the standard of protection of fundamental rights; and the rigidity and fragmentation of the Union system in connection with the recent occasional use of international law as an alternative to Union law. The book looks at the development of the law throughout the decades, inevitably losing much detail, but hopefully also uncovering structural connections and continuities.

scholarly journals Robust Inferences from a Before-and-After Study with Multiple Unaffected Control Groups

2013 ◽  
Vol 1 (2) ◽  
pp. 209-234 ◽  
Author(s):  
Pengyuan Wang ◽  
Mikhail Traskin ◽  
Dylan S. Small
Keyword(s):  
Sensitivity Analysis ◽  
Control Groups ◽  
Two Stage ◽  
Time Effects ◽  
Unaffected Control ◽  
Group Time ◽  
Before And After ◽  
Group Variation ◽  
The Impact ◽  
Before And After Study

AbstractThe before-and-after study with multiple unaffected control groups is widely applied to study treatment effects. The current methods usually assume that the control groups’ differences between the before and after periods, i.e. the group time effects, follow a normal distribution. However, there is usually no strong a priori evidence for the normality assumption, and there are not enough control groups to check the assumption. We propose to use a flexible skew-t distribution family to model group time effects, and consider a range of plausible skew-t distributions. Based on the skew-t distribution assumption, we propose a robust-t method to guarantee nominal significance level under a wide range of skew-t distributions, and hence make the inference robust to misspecification of the distribution of group time effects. We also propose a two-stage approach, which has lower power compared to the robust-t method, but provides an opportunity to conduct sensitivity analysis. Hence, the overall method of analysis is to use the robust-t method to test for the overall hypothesized range of shapes of group variation; if the test fails to reject, use the two-stage method to conduct a sensitivity analysis to see if there is a subset of group variation parameters for which we can be confident that there is a treatment effect. We apply the proposed methods to two datasets. One dataset is from the Current Population Survey (CPS) to study the impact of the Mariel Boatlift on Miami unemployment rates between 1979 and 1982.The other dataset contains the student enrollment and grade repeating data in West Germany in the 1960s with which we study the impact of the short school year in 1966–1967 on grade repeating rates.

scholarly journals A Model for the Thermal Behaviour of an Offshore Cable Installed in a J-Tube

Proceedings ◽  
2020 ◽  
Vol 58 (1) ◽  
pp. 31
Author(s):  
Jeremy Arancio ◽  
Ahmed Ould El Moctar ◽  
Minh Nguyen Tuan ◽  
Faradj Tayat ◽  
Jean-Philippe Roques
Keyword(s):  
Sensitivity Analysis ◽  
Numerical Model ◽  
Thermal Behaviour ◽  
Energy Production ◽  
Power Transmission ◽  
Temperature Fields ◽  
Sobol Indices ◽  
Lumped Element ◽  
Thermal Phenomena ◽  
The Impact

In the race for energy production, supplier companies are concerned by the thermal rating of offshore cables installed in a J-tube, not covered by IEC 60287 standards, and are now looking for solutions to optimize this type of system. This paper presents a numerical model capable of calculating temperature fields of a power transmission cable installed in a J-tube, based on the lumped element method. This model is validated against the existing literature. A sensitivity analysis performed using Sobol indices is then presented in order to understand the impact of the different parameters involved in the heating of the cable. This analysis provides an understanding of the thermal phenomena in the J-tube and paves the way for potential technical and economic solutions to increase the ampacity of offshore cables installed in a J-tube.

scholarly journals Addition of Flucytosine to Fluconazole for the Treatment of Cryptococcal Meningitis in Africa: A Multicountry Cost-effectiveness Analysis

2019 ◽  
Vol 70 (1) ◽  
pp. 26-29 ◽  
Author(s):  
Tinevimbo Shiri ◽  
Angela Loyse ◽  
Lawrence Mwenge ◽  
Tao Chen ◽  
Shabir Lakhi ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Cost Effectiveness ◽  
Cryptococcal Meningitis ◽  
Cost Effective ◽  
Immunodeficiency Virus ◽  
The Mean ◽  
The Cost ◽  
The Impact ◽  
Costing Analysis ◽  
Very High

Abstract Background Mortality from cryptococcal meningitis remains very high in Africa. In the Advancing Cryptococcal Meningitis Treatment for Africa (ACTA) trial, 2 weeks of fluconazole (FLU) plus flucytosine (5FC) was as effective and less costly than 2 weeks of amphotericin-based regimens. However, many African settings treat with FLU monotherapy, and the cost-effectiveness of adding 5FC to FLU is uncertain. Methods The effectiveness and costs of FLU+5FC were taken from ACTA, which included a costing analysis at the Zambian site. The effectiveness of FLU was derived from cohorts of consecutively enrolled patients, managed in respects other than drug therapy, as were participants in ACTA. FLU costs were derived from costs of FLU+5FC in ACTA, by subtracting 5FC drug and monitoring costs. The cost-effectiveness of FLU+5FC vs FLU alone was measured as the incremental cost-effectiveness ratio (ICER). A probabilistic sensitivity analysis assessed uncertainties and a bivariate deterministic sensitivity analysis examined the impact of varying mortality and 5FC drug costs on the ICER. Results The mean costs per patient were US $847 (95% confidence interval [CI] $776–927) for FLU+5FC, and US $628 (95% CI $557–709) for FLU. The 10-week mortality rate was 35.1% (95% CI 28.9–41.7%) with FLU+5FC and 53.8% (95% CI 43.1–64.1%) with FLU. At the current 5FC price of US $1.30 per 500 mg tablet, the ICER of 5FC+FLU versus FLU alone was US $65 (95% CI $28–208) per life-year saved. Reducing the 5FC cost to between US $0.80 and US $0.40 per 500 mg resulted in an ICER between US $44 and US $28 per life-year saved. Conclusions The addition of 5FC to FLU is cost-effective for cryptococcal meningitis treatment in Africa and, if made available widely, could substantially reduce mortality rates among human immunodeficiency virus–infected persons in Africa.

Optimal Capacitors Placement of Distribution Systems Using 2nd Order Power Loss Sensitivity Analysis and Hierarchical Clustering

2014 ◽  
Vol 986-987 ◽  
pp. 377-382 ◽  
Author(s):  
Hui Min Gao ◽  
Jian Min Zhang ◽  
Chen Xi Wu
Keyword(s):  
Sensitivity Analysis ◽  
Hierarchical Clustering ◽  
Distribution System ◽  
Power Flow ◽  
Distribution Systems ◽  
Reactive Power ◽  
Digital Simulation ◽  
Second Order ◽  
First Order ◽  
The Impact

Heuristic methods by first order sensitivity analysis are often used to determine location of capacitors of distribution power system. The selected nodes by first order sensitivity analysis often have virtual high by first order sensitivities, which could not obtain the optimal results. This paper presents an effective method to optimally determine the location and capacities of capacitors of distribution systems, based on an innovative approach by the second order sensitivity analysis and hierarchical clustering. The approach determines the location by the second order sensitivity analysis. Comparing with the traditional method, the new method considers the nonlinear factor of power flow equation and the impact of the latter selected compensation nodes on the previously selected compensation location. This method is tested on a 28-bus distribution system. Digital simulation results show that the reactive power optimization plan with the proposed method is more economic while maintaining the same level of effectiveness.

Theoretical Tire Model Considering Two-Dimensional Contact Patch for Force and Moment

2021 ◽  
Author(s):  
Y. Nakajima ◽  
S. Hidano
Keyword(s):  
Finite Element Method ◽  
Shear Force ◽  
The Self ◽  
Slip Angle ◽  
Force Distribution ◽  
Two Dimensional ◽  
Tire Model ◽  
Side Force ◽  
Contact Patch ◽  
Proposed Model

ABSTRACT The new theoretical tire model for force and moment has been developed by considering a two-dimensional contact patch of a tire with rib pattern. The force and moment are compared with the calculation by finite element method (FEM). The side force predicted by the theoretical tire model is somewhat undervalued as compared with the FEM calculation, while the self-aligning torque predicted by the theoretical tire model agrees well with the FEM calculation. The shear force distribution in a two-dimensional contact patch under slip angle predicted by the proposed model qualitatively agrees with the FEM calculation. Furthermore, the distribution of the adhesion region and sliding region in a two-dimensional contact patch predicted by the theoretical tire model qualitatively agrees with the FEM calculation.

The Role of the Conclusions of the Council of Judges of the Russian Federation in the Prevention of the Emergence and Development of Conflicts of Legal Interests in the Judicial System of Russia

2020 ◽  
Vol 12 ◽  
pp. 56-66
Author(s):  
E. V. Ryabtseva ◽  
Keyword(s):  
Russian Federation ◽  
Judicial System ◽  
Structural Elements ◽  
Consistent System ◽  
Optimal Behavior ◽  
Regulatory Impact ◽  
The Russian Federation ◽  
The Impact ◽  
Individual Regulation

The growing role of the judicial community in reforming the judicial system actualizes the scientific problems of law enforcement associated with understanding the essence of the regulatory impact of the Councils of Judges of the Russian Federation as a body of the judicial community to prevent the emergence of conflicts of legal interests in judicial activity. The purpose of the research is to theoretically substantiate the essence of individual regulation of conflicts of legal interests by the Council of Judges of the Russian Federation, aimed at optimizing its activities to combat corruption. The worldview and methodological basis were the works of theoretical scholars and their methods of integrative understanding of law to substantiate the impact of the Council of Judges of the Russian Federation on judicial activity through individual regulation. The conclusion is substantiated that the activities of the Commission of the Council of Judges of the Russian Federation on Ethics, related to the drawing up of opinions on the assessment of conflicts of legal interests and other corruption risks for both acting judges and retired judges, is an individual regulation of legal relations through: interpretation of law; overcoming gaps and conflicts in the law; individuali zation of rights, etc. The content of the interpretation of law by the Commission of the Council of Judges of the Russian Federation on Ethics is: the application of certain norms of both international and national law in a specific legal relationship when assessing conflicts of legal interests among judges through a systematic interpretation of the norms of law as a system of elements, defining its role in law, identifying other norms, as well as the principles of law; interpretation of the principles and norms of law, through the legal-logical interpretation of a normative act as logically interconnected structural elements of a single, internally agreed and consistent system of principles and norms of law, when deciding on the presence of conflicts of legal interests in the activities of judges, etc. The paper substantiates that in relation to conflicts of legal interests, individualization should be aimed at determining by the Council of Judges of the Russian Federation typical situations of such conflicts for their correct assessment and development of recommendations related to the optimal behavior of judges, when circumstances arise that lead to conflicts of legal interests.

scholarly journals Quantitative Microbial Risk Assessment for Workers Exposed to Bioaerosol in Wastewater Treatment Plants Aimed at the Choice and Setup of Safety Measures

2018 ◽  
Vol 15 (7) ◽  
pp. 1490 ◽  
Author(s):  
Annalaura Carducci ◽  
Gabriele Donzelli ◽  
Lorenzo Cioni ◽  
Ileana Federigi ◽  
Roberto Lombardi ◽  
...  
Keyword(s):  
Risk Assessment ◽  
Sensitivity Analysis ◽  
Wastewater Treatment ◽  
Health Risk ◽  
Average Risk ◽  
Quantitative Microbial Risk Assessment ◽  
Exposure Limits ◽  
Microbial Risk Assessment ◽  
Microbial Risk ◽  
The Impact

Biological risk assessment in occupational settings currently is based on either qualitative or semiquantitative analysis. In this study, a quantitative microbial risk assessment (QMRA) has been applied to estimate the human adenovirus (HAdV) health risk due to bioaerosol exposure in a wastewater treatment plant (WWTP). A stochastic QMRA model was developed considering HAdV as the index pathogen, using its concentrations in different areas and published dose–response relationship for inhalation. A sensitivity analysis was employed to examine the impact of input parameters on health risk. The QMRA estimated a higher average risk in sewage influent and biological oxidation tanks (15.64% and 12.73% for an exposure of 3 min). Sensitivity analysis indicated HAdV concentration as a predominant factor in the estimated risk. QMRA results were used to calculate the exposure limits considering four different risk levels (one illness case per 100, 1.000, 10.000, and 100.000 workers): for 3 min exposures, we obtained 565, 170, 54, and 6 GC/m3 of HAdV. We also calculated the maximum time of exposure for each level for different areas. Our findings can be useful to better define the effectiveness of control measures, which would thus reduce the virus concentration or the exposure time.

Sign in / Sign up

Export Citation Format

Share Document