scholarly journals Experimental Investigation on Making of Plastic Brick

2022 ◽  
pp. 1-7
Author(s):  
P. Subathra ◽  
Binil Varghese ◽  
Muhammed Jamsheed K. P ◽  
Muzammil T. H
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Strength Properties ◽  
Prosopis Juliflora ◽  
Sustainable Construction ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Potential Threat ◽  
Split Tensile Strength ◽  
The Family

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

scholarly journals Experimental Project on Concrete - Partial Replacement of Cement by Prosopis Juliflora

2022 ◽  
pp. 8-12
Author(s):  
P. A. Prabakaran ◽  
Satheesh Kumar KRP ◽  
Janani G
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Strength Properties ◽  
Prosopis Juliflora ◽  
Sustainable Construction ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Potential Threat ◽  
Split Tensile Strength ◽  
Experimental Project

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

scholarly journals Effect of Utilizing Prosopis Juliflora Ash as Cementitious Material

2018 ◽  
Vol 7 (3.12) ◽  
pp. 281
Author(s):  
George Amal Anik S ◽  
Parthiban Kathirvel ◽  
Murali G
Keyword(s):  
Construction Material ◽  
Strength Properties ◽  
Prosopis Juliflora ◽  
Cementitious Material ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Huge Amount ◽  
Small Tree ◽  
Potential Threat ◽  
The Family

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using prosopis juliflora ash (PJA) as cementitious material by partially (10, 20, 30 and 40 %) replacing cement by prosopis juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix

scholarly journals Experimental Investigation of Concrete by Partial Replacement of Cement Using Mesquite

2021 ◽  
pp. 377-381
Author(s):  
L. S. Kalaiselvan ◽  
B. Manibalu
Keyword(s):  
South India ◽  
Construction Material ◽  
Strength Properties ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Cement Concrete ◽  
Huge Amount ◽  
Small Tree ◽  
Potential Threat ◽  
The Family

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using prosopisjuliflora ash(PJA) as cementitious material by partially (10, 20, 30 and 40%) replacing cement by prosopisjuliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix.

scholarly journals Utilization of Sugarcane Bagasse Ash from Power Co-generation Boilers as a Supplementary Cementitious Material

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Safiki Ainomugisha ◽  
Bisaso Edwin ◽  
Bazairwe Annet
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Sugarcane Bagasse ◽  
Low Income ◽  
Ordinary Portland Cement ◽  
Construction Material ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Sugarcane Bagasse Ash

Concrete has been the world’s most consumed construction material, with over 10 billion tons of concrete annually. This is mainly due to its excellent mechanical and durability properties plus high mouldability. However, one of its major constituents; Ordinary Portland Cement is reported to be expensive and unaffordable by most low-income earners. Its production contributes about 5%–8% of global CO2 greenhouse emissions. This is most likely to increase exponentially with the demand of Ordinary Portland Cement estimated to rise by 200%, reaching 6000 million tons/year by 2050.  Therefore, different countries are aiming at finding alternative sustainable construction materials that are more affordable and offer greener options reducing reliance on non-renewable sources. Therefore, this study aimed at assessing the possibility of utilizing sugarcane bagasse ash from co-generation in sugar factories as supplementary material in concrete. Physical and chemical properties of this sugarcane bagasse ash were obtained plus physical and mechanical properties of fresh and hardened concrete made with partial replacement of Ordinary Portland Cement. Cost-benefit analysis of concrete was also assessed. The study was carried using 63 concrete cubes of size 150cm3 with water absorption studied as per BS 1881-122; slump test to BS 1881-102; and compressive strength and density of concrete according to BS 1881-116. The cement binder was replaced with sugarcane bagasse ash 0%, 5%, 10%, 15%, 20%, 25% and 30% by proportion of weight. Results showed the bulk density of sugarcane bagasse ash at 474.33kg/m3, the specific gravity of 1.81, and 65% of bagasse ash has a particle size of less than 0.28mm. Chemically, sugarcane bagasse ash contained SiO2, Fe2O3, and Al2O3 at 63.59%, 3.39%, and 5.66% respectively. A 10% replacement of cement gave optimum compressive strength of 26.17MPa. This 10% replacement demonstrated a cost saving of 5.65% compared with conventional concrete. 

scholarly journals Estudio de la resistencia a compresión del hormigón utilizando el vidrio finamente molido en reemplazo parcial del cemento

2020 ◽  
Vol 4 (2) ◽  
pp. 1
Author(s):  
Sophía Moncerrat Alvarado Mera ◽  
Andy Gabriel Vélez Soledispa ◽  
Wilter Enrique Ruiz Párraga ◽  
Eduardo Humberto Ortiz Hernández ◽  
César Mauricio Jarre Castro
Keyword(s):  
Compressive Strength ◽  
Raw Materials ◽  
Construction Material ◽  
Sustainable Construction ◽  
Ground Glass ◽  
Partial Replacement ◽  
Conventional Concrete ◽  
Renewable Raw Materials ◽  
Test Pieces ◽  
Strength And Durability

  El hormigón obtenido a partir de vidrio finamente molido es una línea de investigación a nuevos materiales, basados en el ahorro del cemento y a su vez en la disminución del dióxido de carbono a la atmósfera para obtener un material constructivo más eficiente y sostenible. Con el propósito de buscar una solución para la fabricación de hormigones, la utilización del vidrio finamente molido como reemplazo parcial del cemento es una de las alternativas para integrarlo al proceso constructivo, cuyo objetivo es disminuir el empleo de materias primas no renovables, utilizando materiales reciclados con excelentes características de resistencia y durabilidad. En la presente investigación se estudió la resistencia a compresión del hormigón, usando vidrio finamente molido, sustituyéndolo en porcentajes del 5%, 10% y 15% en reemplazo parcial del cemento. Se elaboraron probetas de hormigón convencional y probetas de hormigón con adición de vidrio finamente molido, a cada probeta experimentada se le realizó el ensayo de resistencia a compresión del hormigón en un tiempo máximo de curado húmedo de 56 días. Se realizó la comparación entre el hormigón sin adición y el hormigón con porcentajes de vidrio finamente molido, llegando a la conclusión que el vidrio sustituido al 15% como reemplazo parcial del cemento disminuye su resistencia a compresión.   Palabras claves — vidrio finamente molido, resistencia a compresión, hormigón, adición, cemento.   Abstract  The concrete obtained from finely ground glass is a line of investigation to new materials, based on the saving of cement and in turn on the reduction of carbon dioxide to the atmosphere to obtain a more efficient and sustainable construction material. In order to find a solution for the manufacture of concrete, the use of finely ground glass as a partial replacement of cement is one of the alternatives to integrate it into the construction process, whose aim is to reduce the use of non-renewable raw materials, using recycled materials with excellent strength and durability characteristics. In this research, the compressive strength of concrete was studied, using finely ground glass, replacing it in percentages of 5%, 10% and 15% in partial replacement of cement. Conventional concrete test pieces and concrete test pieces with the addition of finely ground glass were produced and each tested test piece was tested for the compressive strength of the concrete within a maximum curing time of 56 days A comparison was made between aggregate concrete and concrete with finely ground glass percentages, concluding that glass replaced at 15% as a partial replacement for cement decreases its compressive strength.   Index Terms — finely ground glass, compressive strength, concrete, addition, cement.

scholarly journals Mechanical Behaviour of Self Compacting Concrete by using M-sand & Rice Husk ash

2019 ◽  
Vol 8 (10) ◽  
pp. 3320-3323
Keyword(s):  
Mechanical Properties ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Construction Material ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Agricultural Product ◽  
River Sand ◽  
Split Tensile Strength ◽  
Manufactured Sand

Rice husk ash (RHA) is an agricultural based pozzolanic material, which contains high amount of silica content. This experimental research was conducted on Self Compaction Concrete (SCC), to generate an economical concrete by using Manufactured Sand (M-sand) and Rice Husk Ash. Natural River sand usage is damaging the river beds, causing the drastic changes in ground water table and cost of river sand increasing day by day. To overcome this problems manufactured sand is used in SCC production. Rice husk Ash is very cheaper when compared to the Cement. It is extracted from Rice Husk which is a waste of Agricultural product. This material can be useful to generate a sustainable construction material. This paper presents the experimental results on development of mechanical properties of SCC with M-sand and Rice Husk Ash. Experiment conducted on 6 different mixes. i.e Partial Replacement with RHA (0%, 5%, 10%, 15%, 20%, 25%). For each mix Fresh properties (Slump flow & L-Box Test) & mechanical properties (Compressive strength, Split Tensile strength and Flexural strength) for 7days, 28days and 60days along with Density comparisons are compared.

scholarly journals Experimental Studies on Strength Properties of M60 Concrete with Partial Replacement of Cement by GGBS and Fly Ash

2021 ◽  
Vol 9 (12) ◽  
pp. 891-894
Author(s):  
Mantu Kumar
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Flexural Strength ◽  
Experimental Studies ◽  
Construction Materials ◽  
Strength Properties ◽  
Partial Replacement ◽  
Split Tensile Strength ◽  
Concrete Production

Abstract: Among all the current construction materials, concrete occupies a unique position. Concrete is the most often utilised building material. Cement production emits CO2, which is harmful to the environment. One of the most crucial ingredients in concrete production is cement. Experiments were carried out to see how different percentages of Fly Ash and GGBS affected the mechanical qualities of M60 grade concrete. After 7, 14, and 28 days of curing, the compressive strength of concrete cubes with suggested replacement was determined. Compressive strength, split tensile strength, and flexural strength are all evaluated on the cubes, cylinders, and prisms. The primary goal of this study is to compare the fresh and hardened characteristics of M-60 grade control concrete with concrete prepared with varied ratios of fly ash and GGBS Keywords: GGBS, Fly Ash, Durability, Compressive Strength, Tensile Strength, Flexural Strength, Slum cone Test

scholarly journals A Review on Compressive Strength of Concrete Containing Waste Cathode Ray Tube Glass as Aggregates

2021 ◽  
Vol 1 (1) ◽  
pp. 1-14
Author(s):  
Nurul Noraziemah Mohd Pauzi
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Concrete Strength ◽  
Strength Properties ◽  
Partial Replacement ◽  
Natural Sand ◽  
Conventional Concrete ◽  
Fine Aggregates ◽  
Cathode Ray Tube ◽  
Recycling Techniques

The issue of the cathode ray tube (CRT) technology facing its end-of-time and increasing quantities across the globe has acquired the responsiveness of many researchers. The use of waste CRT glass as a construction material has fascinated them due to its significant advantage in recycling the hazardous and non-biodegradable waste CRT glass. However, lack of knowledge about the effects and features of CRT glass as a construction material could be a hindrance to the excessive utilization of waste CRT glass. Therefore, in order to establish the idea of using CRT waste glass as a more common construction material, this paper reviews several recycling techniques of CRT glass and further detail on the workability, density, and compressive strength properties of concrete and mortar using CRT glass (treated or untreated) as fine aggregates. The review showed that, generally, the use of CRT glass as a complete or partial replacement of natural sand shows a slight increase in density, workability, and concrete strength compared to conventional concrete. However, there are no clear trends that can be concluded as this review also showed that various factors influenced its performance, such as percentage replacement, particle size, lead (Pb) content, and types of admixtures.

scholarly journals Experimental Researchon Flow and Strength Properties of Blended Fibre Reinforced Self Compacting Concrete

2019 ◽  
Vol 8 (6S4) ◽  
pp. 151-155
Keyword(s):  
Compressive Strength ◽  
Aspect Ratio ◽  
Considerable Increase ◽  
Mechanical Vibration ◽  
Strength Properties ◽  
Single Fiber ◽  
Moderate Increase ◽  
Fiber Reinforced ◽  
Self Compacting Concrete ◽  
Split Tensile Strength

Self compacting concrete achieves compaction by itself without using mechanical vibration techniques. Addition of fibers to SCC results in increased performance mainly in flexure, and also in compressive strength. In this study both the flow and strength properties of single Fiber and blended fiber reinforced self compacting concrete are examined in comparison with control self compacting concrete. crimpled steel fibers having size of 0.45mm diameter x 12.5mm length (aspect ratio 27.7) and 0.45mm diameter x 20 mm length (aspect ratio 44.44) are used in the SCC mix at various percentages by weight of cement i.e. 0%, 2%, 4% and 6%. From the obtained results it can be seen that there is aadverse affect on flow properties. There is a moderate increase in the compressive strength, split tensile strength and considerable increase in the flexural strength of the self compacting concrete using the blended fibers at different percentages i.e. at 2% and 4%, when compared to the single fiber reinforced self compacting concrete.

Incorporation of glass powder and metakaolin as cement partial replacement to improve concrete mechanical properties and increase service life

2020 ◽  
Vol 54 (21) ◽  
pp. 2965-2983
Author(s):  
Guilherme Cunha Guignone ◽  
Geilma Lima Vieira ◽  
Robson Zulcão ◽  
Maxwell Klein Degen ◽  
Sérgio Hémerson de Moraes Mittri ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Service Life ◽  
Glass Powder ◽  
Colorimetric Method ◽  
Point Of View ◽  
Ternary Mixtures ◽  
Chloride Diffusion ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Chloride Permeability

The search for the application of alternative materials, that can partially replace cement and increase the service life of concrete structures, is necessary from the environmental and technological point of view. In this context, the partial substitution of cement in concretes by pozzolanic additions can be performed as ternary mixtures, such as the combined incorporation of glass powder and metakaolin, enabling the reduction of cement consumption and the minimisation of the CO2 emissions and the natural resources consumption. Therefore, this research evaluated the incorporation of glass powder and metakaolin in an isolated and combined way, as partial substitutes for cement in concretes. The compressive strength and the chloride penetration resistance were evaluated by means of electrical resistivity, chloride permeability, steady-state chloride migration test and chloride diffusion test, obtaining the diffusivity and chloride contaminated depth by the colorimetric method. The alkali–silica reactivity test was also conducted, because of the alkali content of the waste glass being higher than the standard requirements. It was concluded that the combined use of ground glass powder and metakaolin in concrete allowed the replacement of up to 20% of the cement, promoting microstructural improvements and increasing properties related to durability and compressive strength already available at 28 days. Furthermore, it increased the estimated service life up to five times, working as an alternative for the reduction of cement use and concrete properties' improvement.

Sign in / Sign up

Export Citation Format

Share Document