scholarly journals Estudio de la resistencia a compresión del hormigón utilizando el vidrio finamente molido en reemplazo parcial del cemento

2020 ◽  
Vol 4 (2) ◽  
pp. 1
Author(s):  
Sophía Moncerrat Alvarado Mera ◽  
Andy Gabriel Vélez Soledispa ◽  
Wilter Enrique Ruiz Párraga ◽  
Eduardo Humberto Ortiz Hernández ◽  
César Mauricio Jarre Castro
Keyword(s):  
Compressive Strength ◽  
Raw Materials ◽  
Construction Material ◽  
Sustainable Construction ◽  
Ground Glass ◽  
Partial Replacement ◽  
Conventional Concrete ◽  
Renewable Raw Materials ◽  
Test Pieces ◽  
Strength And Durability

  El hormigón obtenido a partir de vidrio finamente molido es una línea de investigación a nuevos materiales, basados en el ahorro del cemento y a su vez en la disminución del dióxido de carbono a la atmósfera para obtener un material constructivo más eficiente y sostenible. Con el propósito de buscar una solución para la fabricación de hormigones, la utilización del vidrio finamente molido como reemplazo parcial del cemento es una de las alternativas para integrarlo al proceso constructivo, cuyo objetivo es disminuir el empleo de materias primas no renovables, utilizando materiales reciclados con excelentes características de resistencia y durabilidad. En la presente investigación se estudió la resistencia a compresión del hormigón, usando vidrio finamente molido, sustituyéndolo en porcentajes del 5%, 10% y 15% en reemplazo parcial del cemento. Se elaboraron probetas de hormigón convencional y probetas de hormigón con adición de vidrio finamente molido, a cada probeta experimentada se le realizó el ensayo de resistencia a compresión del hormigón en un tiempo máximo de curado húmedo de 56 días. Se realizó la comparación entre el hormigón sin adición y el hormigón con porcentajes de vidrio finamente molido, llegando a la conclusión que el vidrio sustituido al 15% como reemplazo parcial del cemento disminuye su resistencia a compresión.   Palabras claves — vidrio finamente molido, resistencia a compresión, hormigón, adición, cemento.   Abstract  The concrete obtained from finely ground glass is a line of investigation to new materials, based on the saving of cement and in turn on the reduction of carbon dioxide to the atmosphere to obtain a more efficient and sustainable construction material. In order to find a solution for the manufacture of concrete, the use of finely ground glass as a partial replacement of cement is one of the alternatives to integrate it into the construction process, whose aim is to reduce the use of non-renewable raw materials, using recycled materials with excellent strength and durability characteristics. In this research, the compressive strength of concrete was studied, using finely ground glass, replacing it in percentages of 5%, 10% and 15% in partial replacement of cement. Conventional concrete test pieces and concrete test pieces with the addition of finely ground glass were produced and each tested test piece was tested for the compressive strength of the concrete within a maximum curing time of 56 days A comparison was made between aggregate concrete and concrete with finely ground glass percentages, concluding that glass replaced at 15% as a partial replacement for cement decreases its compressive strength.   Index Terms — finely ground glass, compressive strength, concrete, addition, cement.

scholarly journals Utilization of Sugarcane Bagasse Ash from Power Co-generation Boilers as a Supplementary Cementitious Material

2021 ◽  
Vol 2 (2) ◽  
Author(s):  
Safiki Ainomugisha ◽  
Bisaso Edwin ◽  
Bazairwe Annet
Keyword(s):  
Compressive Strength ◽  
Portland Cement ◽  
Sugarcane Bagasse ◽  
Low Income ◽  
Ordinary Portland Cement ◽  
Construction Material ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Hardened Concrete ◽  
Sugarcane Bagasse Ash

Concrete has been the world’s most consumed construction material, with over 10 billion tons of concrete annually. This is mainly due to its excellent mechanical and durability properties plus high mouldability. However, one of its major constituents; Ordinary Portland Cement is reported to be expensive and unaffordable by most low-income earners. Its production contributes about 5%–8% of global CO2 greenhouse emissions. This is most likely to increase exponentially with the demand of Ordinary Portland Cement estimated to rise by 200%, reaching 6000 million tons/year by 2050.  Therefore, different countries are aiming at finding alternative sustainable construction materials that are more affordable and offer greener options reducing reliance on non-renewable sources. Therefore, this study aimed at assessing the possibility of utilizing sugarcane bagasse ash from co-generation in sugar factories as supplementary material in concrete. Physical and chemical properties of this sugarcane bagasse ash were obtained plus physical and mechanical properties of fresh and hardened concrete made with partial replacement of Ordinary Portland Cement. Cost-benefit analysis of concrete was also assessed. The study was carried using 63 concrete cubes of size 150cm3 with water absorption studied as per BS 1881-122; slump test to BS 1881-102; and compressive strength and density of concrete according to BS 1881-116. The cement binder was replaced with sugarcane bagasse ash 0%, 5%, 10%, 15%, 20%, 25% and 30% by proportion of weight. Results showed the bulk density of sugarcane bagasse ash at 474.33kg/m3, the specific gravity of 1.81, and 65% of bagasse ash has a particle size of less than 0.28mm. Chemically, sugarcane bagasse ash contained SiO2, Fe2O3, and Al2O3 at 63.59%, 3.39%, and 5.66% respectively. A 10% replacement of cement gave optimum compressive strength of 26.17MPa. This 10% replacement demonstrated a cost saving of 5.65% compared with conventional concrete. 

scholarly journals Experimental Investigation on Making of Plastic Brick

2022 ◽  
pp. 1-7
Author(s):  
P. Subathra ◽  
Binil Varghese ◽  
Muhammed Jamsheed K. P ◽  
Muzammil T. H
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Strength Properties ◽  
Prosopis Juliflora ◽  
Sustainable Construction ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Potential Threat ◽  
Split Tensile Strength ◽  
The Family

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

scholarly journals Saving Raw Materials for Cement Manufacture and Reusing an Untreated Waste from the Petrochemical Industry

Resources ◽  
2018 ◽  
Vol 7 (3) ◽  
pp. 56 ◽  
Author(s):  
Bruno Sena da Fonseca ◽  
António Castela ◽  
Rui Neves ◽  
Raquel Duarte ◽  
Carlos Galhano ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Petrochemical Industry ◽  
Raw Materials ◽  
Salt Water ◽  
Chloride Penetration ◽  
Partial Replacement ◽  
Cement Manufacture ◽  
Strength And Durability ◽  
Performance Enhancing

This research addresses the replacement of cement by an untreated waste from the petrochemical industry. The effects of partial replacement of cement by spent fluid cracking catalyst (SFCC) on properties of mortar were determined. In this study, a series of mortar mixes was prepared with replacement ratios of 0%, 3%, 6%, and 12%. Furthermore, performance enhancing factors such as SFCC treatment or use of plasticizers were avoided. Workability, compressive strength, and durability related properties were assessed. An improvement regarding resistance to chloride penetration was observed, as well as that, when curing in salt water, the use of SFCC may be advantageous regarding compressive strength.

scholarly journals Influence of Calcined Clay on the Strength Characteristics and Microstructure of Recycled Aggregate Concrete for Sustainable Construction

2021 ◽  
Vol 54 ◽  
pp. 56-70
Author(s):  
Oluwarotimi Michael Olofinnade ◽  
Isaac T. Oyawoye
Keyword(s):  
Compressive Strength ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Sustainable Construction ◽  
Partial Replacement ◽  
Concrete Aggregate ◽  
Hardened Concrete ◽  
Conventional Concrete ◽  
Calcined Clay

Utilization of concrete wastes as aggregate in conventional concrete is regarded as a promising way of achieving sustainability within the built-up environment. This study investigated the performance of high strength concrete produced using recycled aggregate (RCA) with the addition of calcined clay in the concrete mixes. The recycled aggregate was sourced from concrete rubbles and treated by soaking in water, while calcined clay was sourced from the pilot pozzolana plant of the Nigerian Building and Road Research Institute (NBRRI). The recycled concrete aggregates were used as a replacement for coarse aggregate at levels of 0, 20, 40, 60, 80 and 100%, using a mix ratio of 1:1:2 at a constant water-binder ratio of 0.25. Superplasticizer was added to ensure the workability of the mixes. The calcined clay was added at 15 and 20% partial replacement for cement in the mixes. Physical and chemical properties of the materials used were determined, while the workability of the concrete mixes was examined using the slump. The compressive strength of the hardened concrete was determined after 7, 28 and 56 days of curing using 100 mm cube samples. Scanning Electron Microscope (SEM) was used to evaluate the morphology of selected concrete. Results showed that soaking of the recycled aggregate in water limit the water absorption rate of the RCA aggregates in the mixes, while the addition of calcined clay was observed to slightly reduce the workability of the concrete mixes. A reduction trend in compressive strength was noticed as the percentage of recycled aggregate increases, however, a significant increase in compressive strength was observed with the addition of calcined clay at 15% cement replacement. An optimum concrete mix containing 20% recycled aggregate and 15% calcined clay showed improve performance compare to the other mixes. The implication of these results suggests that recycled concrete aggregate can be used for the production of sustainable structural concrete.

scholarly journals Experimental Project on Concrete - Partial Replacement of Cement by Prosopis Juliflora

2022 ◽  
pp. 8-12
Author(s):  
P. A. Prabakaran ◽  
Satheesh Kumar KRP ◽  
Janani G
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Strength Properties ◽  
Prosopis Juliflora ◽  
Sustainable Construction ◽  
Partial Substitution ◽  
Partial Replacement ◽  
Potential Threat ◽  
Split Tensile Strength ◽  
Experimental Project

Since the building made of cement concrete consumes almost half of the total energy generated and accordingly accountable for huge amount of CO2 emission, it is necessary to replace the Portland cement (PC) with sustainable construction material. Similarly, Prosopis Juliflora is a shrub or small tree in the family Fabaceae, a kind of mesquite which is considered to be a potential threat for ground water in South India. Hence, this has to eradicate so as to maintain the groundwater and also to effectively utilize its ash thereby reducing environmental pollution, this can be used as a partial replacement for cement. In this regard, this paper investigates the technical feasibility of using Prosopis Juliflora ash (PJA) as cementitious material by partially (5%, 10% and 15%) replacing cement by Prosopis Juliflora ash. The mixes were evaluated for their fresh, physical and strength properties such as workability, density and compressive strength and the results were compared with the conventional mix. In order to save the environment and to save the resources we have come up with using the Prosopis Juliflora (Semai-Karuvelam in Tamil) ash as the partial replacement of cement. Cement will produce equal amount of greenhouse gas (co2) which increase the global warming. As the amount of cement is reduced greenhouse gases also reduced. Utilization of Juliflora ash as a partial substitution for cement is one of the promising methods to increase the strength and thermal insulation for cement blocks. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended Prosopis Juliflora cement are evaluated.

scholarly journals An Investigation on Compressive Strength of Concrete Blended With Groundnut Shell Ash

Neutron ◽  
2021 ◽  
Vol 20 (2) ◽  
Author(s):  
Abdul Wahab Abro ◽  
Aneel Kumar ◽  
Manthar Ali Keerio ◽  
Zubair Hussain Shaikh ◽  
Naraindas Bheel ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Compressive Strength ◽  
Construction Material ◽  
Partial Replacement ◽  
Cement Replacement ◽  
Compressive Strength Of Concrete ◽  
Groundnut Shell ◽  
Carbon Dioxide Co2 ◽  
Strength And Durability ◽  
Groundnut Shell Ash

Concrete is frequently utilized infra-structural construction material all over the world. Cement is the main part of the concrete, during its manufacturing emission of gases such as carbon dioxide (CO2) from cement factories create greenhouse effect. In these days various natural pozzolanic materials are used as partial replacement of cement to enhance strength and durability and to reduction in consumption of cement consequently reduction in carbon dioxide (CO2) emission. The aim of this research is to investigate the effect of groundnut shell ash as a cement replacement material on workability and compressive strength of concrete. One mix of ordinary concrete and five mixes of modified concrete were prepared, where cement is replaced by groundnut shell ash from 3% to 15% by weight of cement, with 3% increment with 1:2:4 binding ratio mixed with 0.5 water/cement ratio. The workability and compressive strength of concrete was investigated. The obtained outcomes demonstrated that, groundnut shell ash as a cement replacement material have significant effect on compressive strength of concrete.

scholarly journals Studies on Mechanical properties of High Calcium Fly ash based sustainable Geopolymer concrete

2021 ◽  
Vol 2070 (1) ◽  
pp. 012184
Author(s):  
B Vijaya Prasad ◽  
N Anand ◽  
P D Arumairaj ◽  
M Sanath Kumar ◽  
T Dhilip ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Fly Ash ◽  
Construction Material ◽  
Sustainable Construction ◽  
Geopolymer Concrete ◽  
Conventional Concrete ◽  
High Calcium ◽  
Major Interest ◽  
High Calcium Fly Ash

Abstract Geopolymer concrete (GPC) is a Sustainable construction material, in which cement is completely replaced by Fly ash as binder. To control emission of CO2 during the production of cement, it is advisable to use alternate sustainable Cementitious material. The development of GPC become a major interest to use for in-situ and precast applications. The present study aims to develop High calcium fly ash based GPC with aid of alkaline liquids such as sodium Hydroxide (NaOH) and Sodium silicate (Na2SiO3). Different molarities i.e 4M, 6M, 8M and 10M are used to develop the GPC under ambient and oven curing process. In the present investigation the Fresh properties of GPC and Mechanical properties such as compressive strength, Tensile strength, Flexural strength and Elastic modulus of GPC are investigated. An increase of alkaline activator in in the mix decreased the workability of GPC. The developed GPC mix of 8M is found to be the optimum for gain in compressive strength. A polynomial relationship is obtained for the mechanical properties of GPC developed under ambient and oven curing. The development cost of GPC can be reduced up to 11.25 to 16.5% as compared with conventional concrete grade of M25.

scholarly journals Mechanical and Durability Characteristics of Eco-Friendly Fly Ash Bricks

2021 ◽  
Vol 9 (11) ◽  
pp. 1381-1385
Author(s):  
Chidananda G
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Water Absorption ◽  
Raw Materials ◽  
Construction Material ◽  
Hydraulic Press ◽  
Homogeneous Mixture ◽  
Sustainable Construction ◽  
Stone Dust ◽  
Codal Provisions

Abstract: This paper presents an experimental investigation carried out on eco-friendly fly ash bricks having various percentage of fly ash, lime, gypsum, stone dust, coarse aggregate and boiler slag. Raw materials are added to the pan mixer with different mix proportions and are mixed thoroughly with water until a homogeneous mixture is formed. Prepared homogeneous mixture is fed into the press and moulded to a brick of size 200 x 200 x 300 mm using vibro-hydraulic press. Moulded bricks are air dried for 24 hours, arranged in stacks and are cured for a period of 28 days by sprinkling the water to achieve the optimum strength. Compressive strength, water absorption, efflorescence, dimension tolerance and density tests are conducted as per BIS codal provisions. Eco friendly fly ash bricks having varying proportions of industrial by-products with less content of stone dust satisfy compressive, water absorption, efflorescence, dimensional tolerance and density requirements as per BIS codal provisions and can be used in structures as a sustainable construction material. Keywords: Eco-friendly fly ash bricks, Compressive strength, Water absorption, Efflorescence, Dimension tolerance and Density

scholarly journals A Review on Compressive Strength of Concrete Containing Waste Cathode Ray Tube Glass as Aggregates

2021 ◽  
Vol 1 (1) ◽  
pp. 1-14
Author(s):  
Nurul Noraziemah Mohd Pauzi
Keyword(s):  
Compressive Strength ◽  
Construction Material ◽  
Concrete Strength ◽  
Strength Properties ◽  
Partial Replacement ◽  
Natural Sand ◽  
Conventional Concrete ◽  
Fine Aggregates ◽  
Cathode Ray Tube ◽  
Recycling Techniques

The issue of the cathode ray tube (CRT) technology facing its end-of-time and increasing quantities across the globe has acquired the responsiveness of many researchers. The use of waste CRT glass as a construction material has fascinated them due to its significant advantage in recycling the hazardous and non-biodegradable waste CRT glass. However, lack of knowledge about the effects and features of CRT glass as a construction material could be a hindrance to the excessive utilization of waste CRT glass. Therefore, in order to establish the idea of using CRT waste glass as a more common construction material, this paper reviews several recycling techniques of CRT glass and further detail on the workability, density, and compressive strength properties of concrete and mortar using CRT glass (treated or untreated) as fine aggregates. The review showed that, generally, the use of CRT glass as a complete or partial replacement of natural sand shows a slight increase in density, workability, and concrete strength compared to conventional concrete. However, there are no clear trends that can be concluded as this review also showed that various factors influenced its performance, such as percentage replacement, particle size, lead (Pb) content, and types of admixtures.

scholarly journals Effect of Recycled Coarse Aggregate and Bagasse Ash on Two-Stage Concrete

Crystals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 556
Author(s):  
Muhammad Faisal Javed ◽  
Afaq Ahmad Durrani ◽  
Sardar Kashif Ur Rehman ◽  
Fahid Aslam ◽  
Hisham Alabduljabbar ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Coarse Aggregate ◽  
Construction Material ◽  
Strength Reduction ◽  
Recycled Aggregate ◽  
Two Stage ◽  
Conventional Concrete ◽  
Recycled Coarse Aggregate ◽  
Coarse Aggregates

Numerous research studies have been conducted to improve the weak properties of recycled aggregate as a construction material over the last few decades. In two-stage concrete (TSC), coarse aggregates are placed in formwork, and then grout is injected with high pressure to fill up the voids between the coarse aggregates. In this experimental research, TSC was made with 100% recycled coarse aggregate (RCA). Ten percent and twenty percent bagasse ash was used as a fractional substitution of cement along with the RCA. Conventional concrete with 100% natural coarse aggregate (NCA) and 100% RCA was made to determine compressive strength only. Compressive strength reduction in the TSC was 14.36% when 100% RCA was used. Tensile strength in the TSC decreased when 100% RCA was used. The increase in compressive strength was 8.47% when 20% bagasse ash was used compared to the TSC mix that had 100% RCA. The compressive strength of the TSC at 250 °C was also determined to find the reduction in strength at high temperature. Moreover, the compressive and tensile strength of the TSC that had RCA was improved by the addition of bagasse ash.

Sign in / Sign up

Export Citation Format

Share Document