Levantamiento y modelización tridimensional de la Torre del Negro o de Arráez, torre post-litoral del siglo XVI en El Algar (Región de Murcia, España)

X ◽  
2020 ◽  
Author(s):  
Josefina García-León ◽  
Pedro Enrique Collado-Espejo ◽  
Filippo Fantini ◽  
Francisco Joaquín Jiménez-González
Keyword(s):  
Sixteenth Century ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Mediterranean Coast ◽  
Digital Photogrammetry ◽  
3D Laser Scanning ◽  
Degree Of Protection ◽  
Current State ◽  
Complementary Techniques ◽  
Truncated Pyramid

Graphic survey and three-dimensional modelling of the Negro Tower or Arráez, post-coastal tower of the sixteenth century in El Algar (Region of Murcia, Spain)Post-coastal towers or rural fortress towers, built in the sixteenth century on the Mediterranean coast, had the mission of protecting the population and enhancing the repopulation of these areas, heavily punished by incursions by berber pirates. The Negro Tower or Arráez Tower, in El Algar-Cartagena (Region of Murcia, Spain), is one of those post-coastal lookout towers and was built in 1585. It is shaped like a truncated pyramid, square plan and a height of about 14,00 m. Originally, it had three floors and a terrace. Despite its degree of protection (it is a monument), its current state of conservation is semi-ruined. It has no cover, the vault of the first floor has collapsed and presents cracks that threaten its stability. Therefore, a research project has been developed that has included, among other aspects, the graphic survey with two complementary techniques: digital photogrammetry and 3D laser scanning. The result is an exhaustive graphic documentation that allows understanding the construction and allows the consolidation and volumetric recomposition of the tower. With this work, it is intended to contribute to the conservation and recovery of the heritage value of the Tower, as well as the integration of the historical monument in its natural and landscape environment.

Measurement of erosion state and refractory lining thickness of blast furnace hearth by using three-dimensional laser scanning method

2020 ◽  
Vol 118 (1) ◽  
pp. 106
Author(s):  
Lei Zhang ◽  
Jianliang Zhang ◽  
Kexin Jiao ◽  
Guoli Jia ◽  
Jian Gong ◽  
...  
Keyword(s):  
Blast Furnace ◽  
Laser Scanning ◽  
Refractory Lining ◽  
Three Dimensional ◽  
3D Laser Scanning ◽  
Scanning Method ◽  
Blast Furnace Production ◽  
Severe Erosion ◽  
Residual Thickness ◽  
Minimum Depth

The three-dimensional (3D) model of erosion state of blast furnace (BF) hearth was obtained by using 3D laser scanning method. The thickness of refractory lining can be measured anywhere and the erosion curves were extracted both in the circumferential and height directions to analyze the erosion characteristics. The results show that the most eroded positions located below 20# tuyere with an elevation of 7700 mm and below 24#–25# tuyere with an elevation of 8100 mm, the residual thickness here is only 295 mm. In the circumferential directions, the serious eroded areas located between every two tapholes while the taphole areas were protected well by the bonding material. In the height directions, the severe erosion areas located between the elevation of 7600 mm to 8200 mm. According to the calculation, the minimum depth to ensure the deadman floats in the hearth is 2581 mm, corresponding to the elevation of 7619 mm. It can be considered that during the blast furnace production process, the deadman has been sinking to the bottom of BF hearth and the erosion areas gradually formed at the root of deadman.

scholarly journals 3D laser scanning and digital restoration of an archaeological find

2018 ◽  
Vol 178 ◽  
pp. 03013 ◽  
Author(s):  
Stergios Fragkos ◽  
Emanuel Tzimtzimis ◽  
Dimitrios Tzetzis ◽  
Oana Dodun ◽  
Panagiotis Kyratsis
Keyword(s):  
3D Printing ◽  
Laser Scanning ◽  
Three Dimensional ◽  
3D Laser Scanning ◽  
Analytical Methodology ◽  
3D Cad ◽  
Digital Restoration ◽  
Computer Based ◽  
Ancient Ceramic ◽  
Digital Archaeology

The current paper demonstrates the digital recreation and 3D printing of a missing fragment of an ancient ceramic pottery following digitization using a three dimensional laser scanning. The resulting pointcloud of the laser scans was treated with a series of advanced software for the creation of surfaces and ultimately for a digital model. An analytical methodology is presented revealing the step by step approach, which is an innovative way of recreating a missing fragment. Such approach aims to demonstrate the level of contribution that the ever evolving computer based technologies and 3D printing could bring to cultural heritage. The reverse engineering method presented for the reconstruction of a ceramic pottery, which is a part of the larger field of digital archaeology, is believed to benefit a variety of interested parties including 3D CAD users and designers, archaeologists and museum curators.

scholarly journals RESEARCH ON COORDINATE TRANSFORMATION METHOD OF GB-SAR IMAGE SUPPORTED BY 3D LASER SCANNING TECHNOLOGY

2018 ◽  
Vol XLII-3 ◽  
pp. 1757-1763 ◽  
Author(s):  
P. Wang ◽  
C. Xing
Keyword(s):  
Coordinate System ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Estimation Method ◽  
Image Plane ◽  
Point Clouds ◽  
Transformation Method ◽  
Deformation Monitoring ◽  
Sar Image ◽  
3D Laser Scanning

In the image plane of GB-SAR, identification of deformation distribution is usually carried out by artificial interpretation. This method requires analysts to have adequate experience of radar imaging and target recognition, otherwise it can easily cause false recognition of deformation target or region. Therefore, it is very meaningful to connect two-dimensional (2D) plane coordinate system with the common three-dimensional (3D) terrain coordinate system. To improve the global accuracy and reliability of the transformation from 2D coordinates of GB-SAR images to local 3D coordinates, and overcome the limitation of traditional similarity transformation parameter estimation method, 3D laser scanning data is used to assist the transformation of GB-SAR image coordinates. A straight line fitting method for calculating horizontal angle was proposed in this paper. After projection into a consistent imaging plane, we can calculate horizontal rotation angle by using the linear characteristics of the structure in radar image and the 3D coordinate system. Aided by external elevation information by 3D laser scanning technology, we completed the matching of point clouds and pixels on the projection plane according to the geometric projection principle of GB-SAR imaging realizing the transformation calculation of GB-SAR image coordinates to local 3D coordinates. Finally, the effectiveness of the method is verified by the GB-SAR deformation monitoring experiment on the high slope of Geheyan dam.

The Application of 3D Laser Scanning Technology in Ginkgo Landslide Monitoring

2014 ◽  
Vol 898 ◽  
pp. 759-762
Author(s):  
Yi Heng Pan ◽  
Zhi Gang Li ◽  
Zhan Shi Liu ◽  
Bo Li
Keyword(s):  
Data Analysis ◽  
Data Processing ◽  
Data Acquisition ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Landslide Monitoring ◽  
Deformation Characteristics ◽  
3D Laser Scanning ◽  
Design Data ◽  
Mapping Technology

Three-dimensional laser scanning technology, short for 3D laser scanning technology, is another innovation in surveying and mapping technology after GPS space positioning technology. This paper introduces the 3D laser scanning technology applied in the Ginkgo landslide monitoring. In this paper, the monitoring schematic design, data acquisition, data processing and data analysis are systematically introduced. It follows that Ginkgo landslide overall deformation characteristics, 3D laser scanning technologys strengths and weaknesses in the landslide monitoring. It is promising for the application of 3D laser scanning technology in landslide monitoring.

scholarly journals Building 3D Realistic Modeling Based on Air-ground Multi-source Data Fusion

2020 ◽  
Vol 213 ◽  
pp. 03025
Author(s):  
Yan Wang ◽  
Tingting Zhang ◽  
Jingyi Wang
Keyword(s):  
Data Fusion ◽  
Point Cloud ◽  
Laser Scanning ◽  
Spatial Information ◽  
Complex Structure ◽  
Three Dimensional ◽  
Point Cloud Data ◽  
3D Laser Scanning ◽  
Cloud Data ◽  
Source Data

Three-dimensional point cloud data is a new form of three-dimensional collection, which not only contains the geometric topology information of the object, but also has high simplicity and flexibility. In this paper, the air-ground multi-source data fusion technology is used to study the fine reconstruction of the 3D scene: based on the 3D laser scanning laser point cloud, the 3D spatial information of the ground visible objects is obtained, and the orthophoto obtained by the drone aerial photography is assisted, Obtain the three-dimensional space information of the top of the ground feature, and the ground three-dimensional laser scanner can quickly obtain the three-dimensional surface information of the building facade, ground, and trees. Due to the complex structure of the building and the occlusion of spatial objects, sub-station scanning is required when acquiring point cloud data. This article uses the Sino-German Energy Conservation Center Building of Shenyang Jianzhu University as the research area, using drone tilt photography technology and ground lidar technology to integrate. During the experiment, the field industry adopted the UAV image acquisition strategy of “automatic shooting of regular routes, supplemented by manual shooting of areas of interest”; in the field industry, the method of “manual coarse registration and ICP algorithm fine registration” The example results show that the ground 3D laser point cloud air-ground image fusion 3D modeling effect proposed in this paper is better and the quality is greatly improved, which makes up for the ground 3D laser scanning. In point cloud modeling, a large number of holes are insufficient due to occlusion and missing top information.

3D Laser Scanning at Church Hole, Creswell Crags

2007 ◽  
Author(s):  
Alistair Carty
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Point Of View ◽  
3D Laser Scanning ◽  
Natural Processes ◽  
Planar Surfaces ◽  
3D Surface ◽  
Third Dimension ◽  
Visualization Techniques

The process of recording in situ archaeological art can be a time-consuming and complex task, especially on inaccessible and non-planar surfaces such as those found in Church Hole, Creswell Crags. There are considerable challenges to the recorder, including the accurate positioning and fixing of survey frames, the physical discomfort of sitting, crouching, or even lying down for long periods of time in cramped surroundings, and, ultimately, the difficulty in interpreting the panels to enable accurate recording. Furthermore, the more accurate forms of traditional recording include the taking of rubbings of the carvings, a process known to increase the potential of damage to already fragile artworks. 3D laser scanning offers solutions to most of these problems by quickly producing a highly dense fully three-dimensional surface map of the art which can be studied in more conducive circumstances by researchers at a later date. Furthermore, powerful visualization techniques can be applied to the 3D surface map to extract and enhance detail that might be virtually invisible to the naked eye. Over-arching the visualization and interpretational aspects of 3D laser scanning is the potential to use the acquired 3D surface map to monitor any change in the surface through repeated scanning over a period of time. This technique is suitable for detecting minute differences in the surface over time, including both erosion due to natural processes or vandalism and accretion through build-up of deposits on the surface of the art. The most complex aspect of three-dimensional recording, no matter what the subject matter, is that of the third dimension. People have an almost schizophrenic way of looking at the world. For example, if you were to place two identical objects a distance apart, it is simple to state that one object is further away than the other due to our perception of depth and the ability to walk around the two objects. However, if you were to take a photograph or make a drawing of the scene from one point of view, it becomes difficult to tell whether two identical objects are placed some distance apart, or if two differently sized objects sit beside one another. The three-dimensionality of the scene is now lost and is available by inference only.

scholarly journals Surveying and Digital Restoration of Towering Architectural Heritage in Harsh Environments: a Case Study of the Millennium Ancient Watchtower in Tibet

2018 ◽  
Vol 10 (9) ◽  
pp. 3138 ◽  
Author(s):  
Siliang Chen ◽  
Haozhong Yang ◽  
Shusheng Wang ◽  
Qingwu Hu
Keyword(s):  
Unmanned Aerial Vehicle ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Harsh Environments ◽  
3D Laser Scanning ◽  
Repair Work ◽  
The Status ◽  
Digital Restoration ◽  
Aerial Vehicle ◽  
Restoration Model

Aiming at the problem of difficult data collection and modeling in high-rise ancient buildings with narrow interiors, a method is proposed in this paper for modeling and supporting digital restoration based on unmanned aerial vehicle oblique photogrammetry combined with three-dimensional (3D) laser scanning technology. The ancient watchtower complex in the Tibetan region of China is taken as an example. Firstly, the data is collected using an unmanned aerial vehicle and 3D laser scanner. Secondly, the two types of data are merged to generate a three-dimensional status model. Finally, by analyzing the status model and combining the similar remaining conditions, a virtual restoration scheme is proposed, and a 3D restoration model is established. The results show that virtual restoration based on 3D measurement technology can be used as a new method for the research and protection of towering ancient buildings, asrecorded by adopting targeted technology for digital documentation. It is necessary and effective to adopt a method combining unmanned aerial vehicle oblique photogrammetry and the ground 3D laser scanning technology in harsh environments. The digital model can promote the sustainable utilization of cultural heritage. It is necessary to analyze and make full use of the status model of such ancient buildings based on accurately measured data for the virtual restoration of the damaged ancient buildings. The status model of the ancient buildings can be used for display browsing and disaster recording. The restoration model can be dismantled and used to guide the repair work.

scholarly journals Harbour Infrastructure Inventory Development with 3D Laser Scanning Method

2015 ◽  
Vol 22 (1) ◽  
pp. 99-108
Author(s):  
Sławomir Świerczyński ◽  
Piotr Zwolan
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Great Accuracy ◽  
Modern Technology ◽  
3D Laser Scanning ◽  
Scanning Method ◽  
Inventory Development ◽  
Three Dimensional Models ◽  
Polish Law ◽  
Port Infrastructure

Abstract In the Polish law harbour infrastructure is one of key elements to determine the various cargo types, available means of transport and, ultimately, the significance of any sea port. The structures, devices and installations situated within a port’s boundaries, dedicated to the swift operation of the port, are all designed for tasks that involve the best use of this infrastructure. The proper development and modernization of this infrastructure may well result in improved cooperation with road networks and transportation on land. Owing to modern technology, it is possible to scan the surrounding buildings or location with great accuracy and render three-dimensional models of the scanned objects. These models can be used to generate harbour maps with a detailed 3D picture of the entire port and navigational infrastructure. The authors of this article present the possible applications of modern laser scanning technology in port infrastructure surveying, and in particular in the survey of a complicated wharf line on the Motława River along Długie Pobrzeże Street in Gdańsk.

scholarly journals A COMBINED APPROACH FOR SURVEYING COMPLEX COASTAL SITES

2019 ◽  
Vol XLII-2/W9 ◽  
pp. 425-432
Author(s):  
M. Liuzzo ◽  
R. Feo ◽  
S. Giuliano ◽  
V. Pampalone
Keyword(s):  
Laser Scanning ◽  
Methodological Approach ◽  
Three Dimensional ◽  
Integrated Approach ◽  
Eastern Coast ◽  
3D Laser Scanning ◽  
Three Dimensional Model ◽  
Mobile Mapping ◽  
3D Data ◽  
Interpretation Model

<p><strong>Abstract.</strong> This study presents an integrated approach for reading coastal sites. A process aimed at protecting and enhancing these sites must be developed alongside a targeted interdisciplinary strategy, closely linked to the fields of archaeology, survey, landscape reading, morphology of the territory and geology. These must no longer be managed as individual cognitive elements, but within a single comprehensive analytical interpretation model.</p><p>The experiment activity carried out along the rocky area of Aci Castello, on the eastern coast of Sicily, was developed using a methodological approach based on the integration of 3D data coming from various survey technologies &amp;ndash; 3D laser scanning, mobile mapping and echo sounder systems. The aim of the experiment was to create a complete three-dimensional model of the studied area, focused on obtaining a dynamic understanding, that is punctual and comprehensive, of the site’s value and fragility.</p>

Sign in / Sign up

Export Citation Format

Share Document