Demonstration testing of a system for the high-speed monitoring of the radioactive concentration of wastewater in situ

2017 ◽  
Vol 91 ◽  
pp. 192-197
Author(s):  
Hisatomo Fukui ◽  
Hiroshi Oota ◽  
Hiroyuki Hirano ◽  
Toshihisa Hatano ◽  
Hideyuki Saito
Keyword(s):  
High Speed ◽  
Radioactive Concentration

An atomic-resolution microscope study of Al contracts on GaAs

1986 ◽  
Vol 44 ◽  
pp. 726-727
Author(s):  
Z. Liliental-Weber ◽  
C. Nelson ◽  
R. Ludeke ◽  
R. Gronsky ◽  
J. Washburn
Keyword(s):  
High Speed ◽  
Schottky Contacts ◽  
Detailed Knowledge ◽  
The Past ◽  
Semiconductor Interfaces ◽  
Deposited Metal ◽  
Microwave Applications ◽  
Free Interfaces ◽  
Potential Use

The properties of metal/semiconductor interfaces have received considerable attention over the past few years, and the Al/GaAs system is of special interest because of its potential use in high-speed logic integrated optics, and microwave applications. For such materials a detailed knowledge of the geometric and electronic structure of the interface is fundamental to an understanding of the electrical properties of the contact. It is well known that the properties of Schottky contacts are established within a few atomic layers of the deposited metal. Therefore surface contamination can play a significant role. A method for fabricating contamination-free interfaces is absolutely necessary for reproducible properties, and molecularbeam epitaxy (MBE) offers such advantages for in-situ metal deposition under UHV conditions

scholarly journals Spatially Resolved Experimental Modal Analysis on High-Speed Composite Rotors Using a Non-Contact, Non-Rotating Sensor

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4705
Author(s):  
Julian Lich ◽  
Tino Wollmann ◽  
Angelos Filippatos ◽  
Maik Gude ◽  
Juergen Czarske ◽  
...  
Keyword(s):  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Fiber Reinforced ◽  
Structural Dynamic ◽  
Spatially Resolved ◽  
Glass Fiber Reinforced ◽  
Vibration Responses ◽  
And Performance

Due to their lightweight properties, fiber-reinforced composites are well suited for large and fast rotating structures, such as fan blades in turbomachines. To investigate rotor safety and performance, in situ measurements of the structural dynamic behaviour must be performed during rotating conditions. An approach to measuring spatially resolved vibration responses of a rotating structure with a non-contact, non-rotating sensor is investigated here. The resulting spectra can be assigned to specific locations on the structure and have similar properties to the spectra measured with co-rotating sensors, such as strain gauges. The sampling frequency is increased by performing consecutive measurements with a constant excitation function and varying time delays. The method allows for a paradigm shift to unambiguous identification of natural frequencies and mode shapes with arbitrary rotor shapes and excitation functions without the need for co-rotating sensors. Deflection measurements on a glass fiber-reinforced polymer disk were performed with a diffraction grating-based sensor system at 40 measurement points with an uncertainty below 15 μrad and a commercial triangulation sensor at 200 measurement points at surface speeds up to 300 m/s. A rotation-induced increase of two natural frequencies was measured, and their mode shapes were derived at the corresponding rotational speeds. A strain gauge was used for validation.

Enhanced Grain Refinement of W18Cr4V High‐Speed Steel using in situ TiN‐Nb‐Cr@Graphene/Fe Nanocomposite Inoculant

2021 ◽  
Author(s):  
Lina Bai ◽  
Chunxiang Cui ◽  
Jianjun Zhang ◽  
Lichen Zhao ◽  
Guixing Zheng ◽  
...  
Keyword(s):  
Grain Refinement ◽  
High Speed ◽  
High Speed Steel

scholarly journals Influence of Hydrogeochemistry on Tunnel Drainage in Evaporitic Formations: El Regajal Tunnel Case Study (Aranjuez, Spain)

2021 ◽  
Vol 13 (3) ◽  
pp. 1505
Author(s):  
Ignacio Menéndez Pidal ◽  
Jose Antonio Mancebo Piqueras ◽  
Eugenio Sanz Pérez ◽  
Clemente Sáenz Sanz
Keyword(s):  
High Speed ◽  
Civil Engineering ◽  
Saturation Index ◽  
The Subject ◽  
Under Construction ◽  
Underground Flow ◽  
Very High ◽  
Over Time

Many of the large number of underground works constructed or under construction in recent years are in unfavorable terrains facing unusual situations and construction conditions. This is the case of the subject under study in this paper: a tunnel excavated in evaporitic rocks that experienced significant karstification problems very quickly over time. As a result of this situation, the causes that may underlie this rapid karstification are investigated and a novel methodology is presented in civil engineering where the use of saturation indices for the different mineral specimens present has been crucial. The drainage of the rock massif of El Regajal (Madrid-Toledo, Spain, in the Madrid-Valencia high-speed train line) was studied and permitted the in-situ study of the hydrogeochemical evolution of water flow in the Miocene evaporitic materials of the Tajo Basin as a full-scale testing laboratory, that are conforms as a whole, a single aquifer. The work provides a novel methodology based on the calculation of activities through the hydrogeochemical study of water samples in different piezometers, estimating the saturation index of different saline materials and the dissolution capacity of the brine, which is surprisingly very high despite the high electrical conductivity. The circulating brine appears unsaturated with respect to thenardite, mirabilite, epsomite, glauberite, and halite. The alteration of the underground flow and the consequent renewal of the water of the aquifer by the infiltration water of rain and irrigation is the cause of the hydrogeochemical imbalance and the modification of the characteristics of the massif. These modifications include very important loss of material by dissolution, altering the resistance of the terrain and the increase of the porosity. Simultaneously, different expansive and recrystallization processes that decrease the porosity of the massif were identified in the present work. The hydrogeochemical study allows the evolution of these phenomena to be followed over time, and this, in turn, may facilitate the implementation of preventive works in civil engineering.

In Situ Observation Method for Quantitative Evaluation of Solidification Phenomena and Solidification Cracks during Welding

2014 ◽  
Vol 782 ◽  
pp. 3-7
Author(s):  
Kenji Shinozaki ◽  
Motomichi Yamamoto ◽  
Kohta Kadoi ◽  
Peng Wen
Keyword(s):  
High Speed ◽  
Video Camera ◽  
Solidification Cracking ◽  
In Situ Observation ◽  
High Speed Video Camera ◽  
Varestraint Test ◽  
Solidification Cracks ◽  
Observation Method ◽  
Solidification Crack

Solidification cracking during welding is very serious problem for practical use. Therefore, there are so many reports concerning solidification cracking. Normally, solidification cracking susceptibility of material is quantitatively evaluated using Trans-Varestraint test. On the other hand, local solidification cracking strain was tried to measure precisely using in-situ observation method, called MISO method about 30 years ago. Recently, digital high-speed video camera develops very fast and its image quality is very high. Therefore, we have started to observe solidification crack using in site observation method. In this paper, the local critical strain of a solidification crack was measured and the high temperature ductility curves of weld metals having different dilution ratios and different grain sizes to evaluate quantitatively the effects of dilution ratio and grain size on solidification cracking susceptibility by using an improved in situ observation method.

Microwave On-Line Measurements on Conveyed Products Application to Paper and Wood Industries

1994 ◽  
Vol 347 ◽  
Author(s):  
J.Ch. Bolomey ◽  
G. Cottard ◽  
P. Berthaud ◽  
A. Lemaitre ◽  
J. F. Portala
Keyword(s):  
High Speed ◽  
Transformation Process ◽  
Wood Material ◽  
Quantitative Measurements ◽  
On Line ◽  
Phase Data ◽  
Polynomial Expansions ◽  
Physical Quantities ◽  
Data Calibration

ABSTRACTMicrowave multiport sensors have been shown to provide some unique capabilities to achieve real-time testing of products conveyed at high speed. In many applications, quantitative measurements of physical quantities such as moisture content, density, etc… are required, either to guarantee reliable production or to optimally control a fabrication/transformation process. In this paper, different ways of extracting such physical quantities from microwave measurements performed by multiport sensors are presented. Model approaches are used, based on polynomial expansions of the physical quantities to be measured as a function of the microwave amplitude and phase data. Calibration procedures have been investigated for both paper and wood material samples. Comparisons between in-situ, microwave and conventional, measurements are analysed.

In situ monitoring of electrosprayed water microdroplets using laser and LED light attenuation technique: Comparison with ultra-high-speed camera imaging

2021 ◽  
Vol 129 (18) ◽  
pp. 183305
Author(s):  
Mário Janda ◽  
Mostafa E. Hassan ◽  
Viktor Martišovitš ◽  
Karol Hensel ◽  
Michal Kwiatkowski ◽  
...  
Keyword(s):  
High Speed ◽  
Light Attenuation ◽  
In Situ Monitoring ◽  
High Speed Camera ◽  
Led Light ◽  
Camera Imaging ◽  
Ultra High Speed ◽  
Technique Comparison

Anin situatomic force microscope for normal-incidence nanofocus X-ray experiments

2016 ◽  
Vol 23 (5) ◽  
pp. 1110-1117 ◽  
Author(s):  
M. V. Vitorino ◽  
Y. Fuchs ◽  
T. Dane ◽  
M. S. Rodrigues ◽  
M. Rosenthal ◽  
...  
Keyword(s):  
Thin Film ◽  
Atomic Force Microscope ◽  
High Speed ◽  
Normal Incidence ◽  
Organic Thin Film ◽  
X Ray ◽  
Atomic Force ◽  
Synchrotron Beamlines

A compact high-speed X-ray atomic force microscope has been developed forin situuse in normal-incidence X-ray experiments on synchrotron beamlines, allowing for simultaneous characterization of samples in direct space with nanometric lateral resolution while employing nanofocused X-ray beams. In the present work the instrument is used to observe radiation damage effects produced by an intense X-ray nanobeam on a semiconducting organic thin film. The formation of micrometric holes induced by the beam occurring on a timescale of seconds is characterized.

High-speed CMOS image sensor circuits with in situ frame storage

2004 ◽  
Vol 51 (4) ◽  
pp. 1648-1656 ◽  
Author(s):  
S. Kleinfelder ◽  
Yandong Chen ◽  
K. Kwiatkowski ◽  
A. Shah
Keyword(s):  
High Speed ◽  
Cmos Image Sensor ◽  
Image Sensor

scholarly journals Understanding oxide degradation mechanisms in ultra-thin SiO2 through high-speed, high-resolution in-situ measurements

2005 ◽  
Vol 80 ◽  
pp. 182-185 ◽  
Author(s):  
S. Aresu ◽  
W. De Ceuninck ◽  
R. Degraeve ◽  
B. Kaczer ◽  
G. Knuyt ◽  
...  
Keyword(s):  
High Resolution ◽  
High Speed ◽  
In Situ Measurements ◽  
Degradation Mechanisms ◽  
Oxide Degradation
Sign in / Sign up

Export Citation Format

Share Document