scholarly journals To Evaluate and Compare the Efficacy, Cleaning Ability of Hand and Two Rotary Systems in Root Canal Retreatment

2013 ◽  
Vol 14 (3) ◽  
pp. 440-444 ◽  
Author(s):  
Jyoti Sachdeva ◽  
Chetan R Patil ◽  
Venugopal Thangala ◽  
Pabbati Ravi Kumar ◽  
Akash Krishna

ABSTRACT Aim To evaluate and compare the efficacy, cleaning ability of hand and two rotary systems in root canal retreatment. Methodology Sixty extracted premolars were retreated with following systems: Group 1—ProTaper Universal retreatment files, Group 2—ProFile system, Group 3—H-file. Specimens were split longitudinally and amount of remaining gutta-percha on the canal walls was assessed using direct visual scoring with the aid of stereomicroscope. Results were statistically analyzed using ANOVA test. Results Completely clean root canal walls were not achieved with any of the techniques investigated. However, all three systems proved to be effective for gutta-percha removal. Significant difference was found between ProTaper universal retreatment file and H-file, and also between ProFile and H-file. Conclusion Under the conditions of the present study, ProTaper Universal retreatment files left significantly less guttapercha and sealer than ProFile and H-file. Clinical significance Rotary systems in combination with gutta-percha solvents can perform superiorly as compared to the time tested traditional hand instrumentation in root canal retreatment. How to cite this article Shivanand S, Patil CR, Thangala V, Kumar PR, Sachdeva J, Krishna A. To Evaluate and Compare the Efficacy, Cleaning Ability of Hand and Two Rotary Systems in Root Canal Retreatment. J Contemp Dent Pract 2013;14(3):440-444.

2014 ◽  
Vol 8 (1) ◽  
pp. 184-187 ◽  
Author(s):  
Hamed Homayouni ◽  
Nima Moradi Majd ◽  
Heidar Zohrehei ◽  
Behrad Mosavari ◽  
Mamak Adel ◽  
...  

Objectives: The aim of this study was to evaluate the effect of the precipitate that was formed by combining Sodium Hypochlorite (NaOCl) and Chlorhexidine Gluconate (CHX) on the sealing ability of root canal obturation materials. Materials and Methods: The fluid filtration method was conducted on a total of 100 roots. Samples were randomly divided into two control (n=5) and three experimental groups (n=30). The samples in group 1 were irrigated with 1.5 mL of 2.5% NaOCl, and then the smear layers of the teeth were removed by 17% EDTA, while the specimens of group 2 were irrigated by 1.5 mL of 2.5% NaOCl and 1.5 mL of 2% CHX; after the smear layer removal, a final flush with 1.5 mL of 2.5% NaOCl was performed. The samples of group 3 were irrigated the same as group 1 but after the smear layer removal canals were irrigated again with 1.5 mL of 2.5% NaOCl and then a final flush with 1.5 mL of 2% CHX was performed. Teeth were obturated with gutta-percha and AH26 sealer and after seven days, microleakage was evaluated by the fluid filtration technique. The results were analyzed by the ANOVA and Tukey's test. Results: The samples in group 3 had significantly greater microleakage compared to teeth in group 1, 2 (p<0.05), and the specimens in group 1 showed significantly less amount of microleakage than samples in group 2, 3 (p<0.05). Conclusion: The presence of the precipitate that is formed due to interaction between NaOCl and CHX has negative effect on the sealing ability of gutta-percha and AH26 sealer.


2011 ◽  
Vol 2011 ◽  
pp. 1-5 ◽  
Author(s):  
Jaya Siotia ◽  
Shashi Rashmi Acharya ◽  
Sunil Kumar Gupta

Objective. To compare the efficacy of ProTaper retreatment files in removing three different obturating materials.Study Design. Forty-five human, single-rooted premolars were divided into three experimental groups. Group 1 was obturated with gutta-percha and AH Plus sealer, Group 2 was obturated with gutta-percha and zinc oxide eugenol sealer, and Group 3 was obturated with GuttaFlow. Retreatment was done using the ProTaper universal rotary retreatment files. Root halves were visualized using magnifying loops at 3X magnification and optical stereomicroscope at 10X magnification. Images were analyzed using AutoCAD 2004 software to calculate area of the remaining debris in the canal. For statistical analysis were used variance test and ANOVA.Results. Total debris/canal area ratio between the three groups showed a statistically significant difference (P<0.001).Conclusion. ProTaper retreatment system did not produce completely clean canals in any of the groups. However, it had the best efficacy towards removing silicon based obturating material GuttaFlow.


2012 ◽  
Vol 3 (2) ◽  
pp. 166-170
Author(s):  
Carla Zogheib ◽  
Etienne Medioni

ABSTRACT Forty-eight extracted maxillary anterior teeth instrumented with ProTaper system to apical preparations 0.25, 0.40 and 0.60 mm (n = 16 each) were divided into six groups for filling as following: Group 1: Apical preparation 25/100 + gutta-percha/AH Plus sealer, group 2: Apical preparation 25/100 + Resilon/Real Seal, group 3: Apical preparation 40/100 + gutta-percha/AH plus sealer, group 4: Apical preparation 40/100 + Resilon/Real Seal, group 5: Apical preparation 60/100 + gutta-percha/AH plus, group 6: Apical preparation 60/100 + Resilon/Real Seal. All teeth were filled using the warm vertical technique. Horizontal sections at 1, 2 and 3 mm from the apex were observed by SEM under 200 × magnification. Sections were digitally photographed under a stereomicroscope and the images were transferred to a compatible PC for image analysis. The surface area of voids were calculated and compared at all levels; using the Kruskal-Wallis test with Sidak correction and Mann-Whitney U test (p > 0.05). Comparisons within each group (gutta-percha/AH plus and Resilon/Real Seal) showed the presence of voids but there was no significant difference between any level of sectioning for apical preparations of 25 and 40 (p > 0.05). The only difference was in the groups prepared to size 60 and filled with Resilon/ Real Seal which showed significantly more voids than the group filled with gutta-percha/AH plus and especially at the 3 mm level. Conclusion The system Resilon/Real Seal did not achieve better results in terms of sealing ability in the apical third when compared to the conventional gutta-percha/AH plus sealing system. How to cite this article Zogheib C, Naaman A, Medioni E. Evaluation of Apical Filling after Warm Vertical Compaction using Two Different Endodontic Materials: Resilon® and Gutta-Percha. World J Dent 2012;3(2):166-170.


2014 ◽  
Vol 4 (2) ◽  
pp. 56-60 ◽  
Author(s):  
JS Dhillon ◽  
A Bhagat ◽  
G Chhabra

Aim - Evaluate the efficacy of Pro Taper and Pro Taper Retreatment instruments in the removal of gutta-percha during retreatment of straight root canals in comparison with Hedstrom files. Methodology -The root canals of 30 Maxillary central incisors were instrumented by step back procedure and obturated with lateral condensation before the teeth were randomly divided into three groups of 10 specimens each i.e. Group I-using Hfiles, Group 2- using Pro Taper and Group 3- using Pro Taper retreatment. Radiographs were taken after the filling removal and the canal wall cleanliness was evaluated. Roots were divided into apical, middle and coronal parts and scored on a scale of 0 (no debris), 1(25-50% of walls covered with debris and 3 (>50% of walls covered with debris).Number of fractured instruments were also evaluated in each group. Results-There was no significant difference (p>0.05) between the three groups in terms of the debris seen radio graphically after retreatment. Conclusion - All systems evaluated ex vivo were equally effective in removing gutta percha during retreatment. DOI: http://dx.doi.org/10.3329/bjdre.v4i2.20250 Bangladesh Journal of Dental Research and Education Vol.4(2) 2014: 56-60


2021 ◽  
Vol 20 (1) ◽  
Author(s):  
Mustaffa M ◽  
Nordin N ◽  
Embong SNH ◽  
Mohd Ibrahim MS

INTRODUCTION: This study compared the obturated surface area, the extrusion of root filling material beyond the apical foramen and the duration of obturation procedure in single-rooted mandibular premolar using monocone obturation technique. MATERIALS AND METHODS: The root canal of twenty single-rooted mandibular premolars were prepared, and then divided into two groups; Group 1 (GuttaFlow Bioseal (GFB) and a gutta-percha (GP) cone) and Group 2 (RoekoSeal Automix root canal sealer and a GP cone). The obturation procedure was timed and the obturation radiograph was taken after the procedure. The roots were sectioned perpendicularly and the surfaces were observed under scanning electron microscope. The images were transferred to the SketchAndCalc Area Calculator software for evaluation of the obturated surface area. RESULTS: The median score of obturated surface area in Group 1 and 2 at the apical was 86.51 and 83.00, at the middle was 90.48 and 87.35 and at the coronal was 93.00 and 83.39, respectively. The extrusion of root filling material between two groups did not show statistically significant difference. The mean duration of obturation in Group 1 and 2 was 149.50 and 137.60, respectively. CONCLUSIONS: The obturated surface area at the apical and middle root regions in Group 1 and 2 was comparable but at the coronal region, Group 1 showed 11.5% better coverage. The extrusion of root filling material in Group 1 and 2 was equivalent. Obturation procedure in Group 1 took 8.6% longer than in the Group 2.


2007 ◽  
Vol 18 (1) ◽  
pp. 16-19 ◽  
Author(s):  
Lilia E. Leonardi ◽  
Diana M. Atlas ◽  
Guillermo Raiden

The aim of the present study was to assess the presence of apically extruded debris and evaluate the influence of canal curvature on the amount of debris produced by manual and mechanical techniques. Forty single-rooted mature teeth with 15 to 30 degree of root canal curvature were selected. The presence of only one foramen was confirmed using a magnifying lens. A size 15 K-file was placed up to the apical foramen to determine the patency. Working length was determined with the same instrument, 1 mm short of the foramen. According to the employed technique, the groups were labeled as follows: Group 1 - Manual instrumentation with Mor-flex files; Group 2 - Mechanical instrumentation with Cursor and Mor-flex files; Group 3 - Manual instrumentation with Flexi-cut files; Group 4 - Mechanical instrumentation with Cursor and Flexi-cut files. During instrumentation, the root canals were irrigated with 20 mL. Debris extruded through the apical foramen was collected using the Myers and Montgomery technique. The values (in mg) were: Group 1: 0.422 ± 0.683; Group 2: 0.688 ± 0.795; Group 3: 0.409 ± 0.323; Group 4: 0.810 ± 0.708. Data were analyzed statistically by ANOVA at 5% significance level. There was no statistically significant difference among the groups (p<0.05). No statistically significant differences were found between slight and moderate curvatures in terms of the amount of extruded debris (p>0.05).


VASA ◽  
2020 ◽  
Vol 49 (4) ◽  
pp. 281-284
Author(s):  
Atıf Yolgosteren ◽  
Gencehan Kumtepe ◽  
Melda Payaslioglu ◽  
Cuneyt Ozakin

Summary. Background: Prosthetic vascular graft infection (PVGI) is a complication with high mortality. Cyanoacrylate (CA) is an adhesive which has been used in a number of surgical procedures. In this in-vivo study, we aimed to evaluate the relationship between PVGI and CA. Materials and methods: Thirty-two rats were equally divided into four groups. Pouch was formed on back of rats until deep fascia. In group 1, vascular graft with polyethyleneterephthalate (PET) was placed into pouch. In group 2, MRSA strain with a density of 1 ml 0.5 MacFarland was injected into pouch. In group 3, 1 cm 2 vascular graft with PET piece was placed into pouch and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. In group 4, 1 cm 2 vascular graft with PET piece impregnated with N-butyl cyanoacrylate-based adhesive was placed and MRSA strain with a density of 1 ml 0.5 MacFarland was injected. All rats were scarified in 96th hour, culture samples were taken where intervention was performed and were evaluated microbiologically. Bacteria reproducing in each group were numerically evaluated based on colony-forming unit (CFU/ml) and compared by taking their average. Results: MRSA reproduction of 0 CFU/ml in group 1, of 1410 CFU/ml in group 2, of 180 200 CFU/ml in group 3 and of 625 300 CFU/ml in group 4 was present. A statistically significant difference was present between group 1 and group 4 (p < 0.01), between group 2 and group 4 (p < 0.01), between group 3 and group 4 (p < 0.05). In terms of reproduction, no statistically significant difference was found in group 1, group 2, group 3 in themselves. Conclusions: We observed that the rate of infection increased in the cyanoacyrylate group where cyanoacrylate was used. We think that surgeon should be more careful in using CA in vascular surgery.


2021 ◽  
Vol 28 (3) ◽  
pp. 328-338
Author(s):  
Ogbutor Udoji Godsday ◽  
Nwangwa Eze Kingsley ◽  
Nwogueze Bartholomew Chukwuebuka ◽  
Chukwuemeka Ephraim ◽  
Ezunu Emmanuel ◽  
...  

Decline in normal physiological pulmonary function has been attributed to premorbid conditions such as prehypertension. Research evidence suggests that physical activity reduces age-related decline in pulmonary function and improves the efficiency of the lungs in prehypertensive patients. However, there is a scarcity of data evidence relating to isometric exercise and pulmonary function. Furthermore, the interrelationship between the intensity and duration of isometric exercise and pulmonary function in these patients is still uncertain. Therefore, this study was undertaken to investigate the effect of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. To determine the effectiveness of isometric handgrip exercise on pulmonary function capacity in adults with prehypertension. A quasi experiment using a pre- and post-exercise method was carried out in two out-patients hospital settings. The sample comprised 192 sedentary pre-hypertensive subjects, aged between 30–50 years, that were randomly distributed into three groups of 64 participants each. The subjects performed, for 24 consecutive days, an isometric handgrip exercise at 30% Maximum Voluntary Contraction (M.V.C.). At the end of the 24 days, group one (GP1) discontinued, while group two (GP2) continued the exercise protocol for another 24 consecutive days and group three (GP3) continued with the exercise protocol for another 24 consecutive days but at 50% M.V.C. Determinants of lung function (outcomes) were Forced Expiratory Volume in 1 s (FEV1), Forced Vital Capacity (FVC), FEV1/FVC Ratio and Peak Expiratory Flow Rate (PEFR). The study shows that there was no statistically significant difference in the pre- and post-exercise outcomes for FEV1, FVC, FEV1/FVC Ratio and PEFR after 24 days for group 1. In group 2, there was a statistically significant difference in the FVC [(mean = 0.12 ± 0.12), (p = 0.002)], FEV1 [(mean = 0.15 ± 0.17), (p = 0.003)] and PEF [(mean = 0.85 ± 0.35), (p = 0.001)] after 48 days. In group 3, there was a statistically significant difference (p = 0.001) in all the outcomes assessed after 48 days. There was a between groups difference in favour of group 2 compared with group 1 for outcomes of FEV1 [(mean = 0.142 ± 0.68), (p = 0.005)] and PEF [(mean = 0.83 ± 0.19), (p = 0.0031)]. There was statistically significant difference in favour of group 3 compared to group 2, by increasing the exercise intensity from 30% to 50% M.V.C., for outcomes of FVC [mean change = 0.10 ± 0.052), (p = 0.005)], FEV1/FVC [mean change = 3.18 ± 0.75), (p = 0.017)] and PEF [(mean change = 0.86 ± 0.35), (p = 0.001)] after 48 days. Isometric handgrip exercise (after 48 days at 30% to 50% M.V.C.) improves outcomes of pulmonary function capacity in adults with prehypertension. Meanwhile, duration and/or increase in intensity of the isometric effort significantly contributed to the affects attained.


Arthroplasty ◽  
2021 ◽  
Vol 3 (1) ◽  
Author(s):  
Zhijie Chen ◽  
Kaizhe Chen ◽  
Yufei Yan ◽  
Jianmin Feng ◽  
Yi Wang ◽  
...  

Abstract Objective To evaluate the effect of medial posterior tibial slope (PTS) on mid-term postoperative range of motion (ROM) and functional improvement of the knee after medial unicompartmental knee arthroplasty (UKA). Methods Medical records of 113 patients who had undergone 124 medial UKAs between April 2009 through April 2014 were reviewed retrospectively. The mean follow-up lasted 7.6 years (range, 6.2–11.2 years). Collected were demographic data, including gender, age, height, weight of the patients. Anteroposterior (AP) and lateral knee radiographs of the operated knees were available in all patients. The knee function was evaluated during office follow-up or hospital stay. Meanwhile, postoperative PTS, ROM, maximal knee flexion and Hospital for Special Surgery (HSS) knee score (pre−/postoperative) of the operated side were measured and assessed. According to the size of the PTS, patients were divided into 3 groups: group 1 (<4°), group 2 (4° ~ 7°) and group 3 (>7°). The association between PTS and the knee function was investigated. Results In our cohort, the average PTS was 2.7° ± 0.6° in group 1, 5.6° ± 0.9° in group 2 and 8.7° ± 1.2° in group 3. Pairwise comparisons showed significant differences among them (p < 0.01). The average maximal flexion range of postoperative knees in each group was 112.4° ± 5.6°, 116.4° ± 7.2°, and 117.5° ± 6.1°, respectively, with significant difference found between group 1 and group 2 (p < 0.05), and between group 1 and group 3 (p < 0.05). However, the gender, age, and body mass index (BMI) did not differ between three groups and there was no significant difference between groups in terms of pre−/postoperative HSS scores or postoperative knee ROM. Conclusion A mid-term follow-up showed that an appropriate PTS (4° ~ 7°) can help improve the postoperative flexion of knee. On the other hand, too small a PTS could lead to limited postoperative knee flexion. Therefore, the PTS less than 4° should be avoided during medial UKA.


2021 ◽  
pp. 1-7
Author(s):  
Emre Erdem ◽  
Ahmet Karatas ◽  
Tevfik Ecder

<b><i>Introduction:</i></b> The effect of high serum ferritin levels on long-term mortality in hemodialysis patients is unknown. The relationship between serum ferritin levels and 5-year all-cause mortality in hemodialysis patients was investigated in this study. <b><i>Methods:</i></b> A total of 173 prevalent hemodialysis patients were included in this study. The patients were followed for up to 5 years and divided into 3 groups according to time-averaged serum ferritin levels (group 1: serum ferritin &#x3c;800 ng/mL, group 2: serum ferritin 800–1,500 ng/mL, and group 3: serum ferritin &#x3e;1,500 ng/mL). Along with the serum ferritin levels, other clinical and laboratory variables that may affect mortality were also included in the Cox proportional-hazards regression analysis. <b><i>Results:</i></b> Eighty-one (47%) patients died during the 5-year follow-up period. The median follow-up time was 38 (17.5–60) months. The 5-year survival rates of groups 1, 2, and 3 were 44, 64, and 27%, respectively. In group 3, the survival was lower than in groups 1 and 2 (log-rank test, <i>p</i> = 0.002). In group 1, the mortality was significantly lower than in group 3 (HR [95% CI]: 0.16 [0.05–0.49]; <i>p</i> = 0.001). In group 2, the mortality was also lower than in group 3 (HR [95% CI]: 0.32 [0.12–0.88]; <i>p</i> = 0.026). No significant difference in mortality between groups 1 and 2 was found (HR [95% CI]: 0.49 [0.23–1.04]; <i>p</i> = 0.063). <b><i>Conclusion:</i></b> Time-averaged serum ferritin levels &#x3e;1,500 ng/mL in hemodialysis patients are associated with an increased 5-year all-cause mortality risk.


Sign in / Sign up

Export Citation Format

Share Document