scholarly journals The Pliocene Model Intercomparison Project Phase 2: large-scale climate features and climate sensitivity

2020 ◽  
Vol 16 (6) ◽  
pp. 2095-2123 ◽  
Author(s):  
Alan M. Haywood ◽  
Julia C. Tindall ◽  
Harry J. Dowsett ◽  
Aisling M. Dolan ◽  
Kevin M. Foley ◽  
...  
Keyword(s):  
Climate Sensitivity ◽  
Large Scale ◽  
Climate Models ◽  
Temperature Response ◽  
Surface Air Temperature ◽  
System Response ◽  
Phase 2 ◽  
Model Intercomparison ◽  
Intergovernmental Panel ◽  
Intercomparison Project

Abstract. The Pliocene epoch has great potential to improve our understanding of the long-term climatic and environmental consequences of an atmospheric CO2 concentration near ∼400 parts per million by volume. Here we present the large-scale features of Pliocene climate as simulated by a new ensemble of climate models of varying complexity and spatial resolution based on new reconstructions of boundary conditions (the Pliocene Model Intercomparison Project Phase 2; PlioMIP2). As a global annual average, modelled surface air temperatures increase by between 1.7 and 5.2 ∘C relative to the pre-industrial era with a multi-model mean value of 3.2 ∘C. Annual mean total precipitation rates increase by 7 % (range: 2 %–13 %). On average, surface air temperature (SAT) increases by 4.3 ∘C over land and 2.8 ∘C over the oceans. There is a clear pattern of polar amplification with warming polewards of 60∘ N and 60∘ S exceeding the global mean warming by a factor of 2.3. In the Atlantic and Pacific oceans, meridional temperature gradients are reduced, while tropical zonal gradients remain largely unchanged. There is a statistically significant relationship between a model's climate response associated with a doubling in CO2 (equilibrium climate sensitivity; ECS) and its simulated Pliocene surface temperature response. The mean ensemble Earth system response to a doubling of CO2 (including ice sheet feedbacks) is 67 % greater than ECS; this is larger than the increase of 47 % obtained from the PlioMIP1 ensemble. Proxy-derived estimates of Pliocene sea surface temperatures are used to assess model estimates of ECS and give an ECS range of 2.6–4.8 ∘C. This result is in general accord with the ECS range presented by previous Intergovernmental Panel on Climate Change (IPCC) Assessment Reports.

scholarly journals A return to large-scale features of Pliocene climate: the Pliocene Model Intercomparison Project Phase 2

2020 ◽  
Author(s):  
Alan M. Haywood ◽  
Julia C. Tindall ◽  
Harry J. Dowsett ◽  
Aisling M. Dolan ◽  
Kevin M. Foley ◽  
...  
Keyword(s):  
Large Scale ◽  
Climate Models ◽  
Temperature Response ◽  
Surface Air Temperature ◽  
Co2 Concentration ◽  
Mean Value ◽  
System Response ◽  
Phase 2 ◽  
Model Intercomparison ◽  
Intercomparison Project

Abstract. The Pliocene epoch has great potential to improve our understanding of the long-term climatic and environmental consequences of an atmospheric CO2 concentration near ~ 400 parts per million by volume. Here we present the large-scale features of Pliocene climate as simulated by a new ensemble of climate models of varying complexity and spatial resolution and based on new reconstructions of boundary conditions (the Pliocene Model Intercomparison Project Phase 2; PlioMIP2). As a global annual average, modelled surface air temperatures increase by between 1.4 and 4.7 °C relative to pre-industrial with a multi-model mean value of 2.8 °C. Annual mean total precipitation rates increase by 6 % (range: 2 %–13 %). On average, surface air temperature (SAT) increases are 1.3 °C greater over the land than over the oceans, and there is a clear pattern of polar amplification with warming polewards of 60° N and 60° S exceeding the global mean warming by a factor of 2.4. In the Atlantic and Pacific Oceans, meridional temperature gradients are reduced, while tropical zonal gradients remain largely unchanged. Although there are some modelling constraints, there is a statistically significant relationship between a model's climate response associated with a doubling in CO2 (Equilibrium Climate Sensitivity; ECS) and its simulated Pliocene surface temperature response. The mean ensemble earth system response to doubling of CO2 (including ice sheet feedbacks) is approximately 50 % greater than ECS, consistent with results from the PlioMIP1 ensemble. Proxy-derived estimates of Pliocene sea-surface temperatures are used to assess model estimates of ECS and indicate a range in ECS from 2.5 to 4.3 °C. This result is in general accord with the range in ECS presented by previous IPCC Assessment Reports.

scholarly journals Reduced complexity model intercomparison project phase 1: Protocol, results and initial observations

2020 ◽  
Author(s):  
Zebedee R. J. Nicholls ◽  
Malte Meinshausen ◽  
Jared Lewis ◽  
Robert Gieseke ◽  
Dietmar Dommenget ◽  
...  
Keyword(s):  
Radiative Forcing ◽  
Climate Models ◽  
Phase 1 ◽  
Coupled Model ◽  
Surface Air Temperature ◽  
Internal Variability ◽  
Second Phase ◽  
Model Intercomparison ◽  
Intercomparison Project ◽  
Reduced Complexity

Abstract. Here we present results from the first phase of the Reduced Complexity Model Intercomparison Project (RCMIP). RCMIP is a systematic examination of reduced complexity climate models (RCMs), which are used to complement and extend the insights from more complex Earth System Models (ESMs), in particular those participating in the Sixth Coupled Model Intercomparison Project (CMIP6). In Phase 1 of RCMIP, with 14 participating models namely ACC2, AR5IR (2 and 3 box versions), CICERO-SCM, ESCIMO, FaIR, GIR, GREB, Hector, Held et al. two layer model, MAGICC, MCE, OSCAR and WASP, we highlight the structural differences across various RCMs and show that RCMs are capable of reproducing global-mean surface air temperature (GSAT) changes of ESMs and historical observations. We find that some RCMs are capable of emulating the GSAT response of CMIP6 models to within a root-mean square error of 0.2 °C (of the same order of magnitude as ESM internal variability) over a range of scenarios. Running the same model configurations for both RCP and SSP scenarios, we see that the SSPs exhibit higher effective radiative forcing throughout the second half of the 21st Century. Comparing our results to the difference between CMIP5 and CMIP6 output, we find that the change in scenario explains approximately 46 % of the increase in higher end projected warming between CMIP5 and CMIP6. This suggests that changes in ESMs from CMIP5 to CMIP6 explain the rest of the increase, hence the higher climate sensitivities of available CMIP6 models may not be having as large an impact on GSAT projections as first anticipated. A second phase of RCMIP will complement RCMIP Phase 1 by exploring probabilistic results and emulation in more depth to provide results available for the IPCC's Sixth Assessment Report author teams.

scholarly journals Effective radiative forcing and adjustments in CMIP6 models

2020 ◽  
Vol 20 (16) ◽  
pp. 9591-9618 ◽  
Author(s):  
Christopher J. Smith ◽  
Ryan J. Kramer ◽  
Gunnar Myhre ◽  
Kari Alterskjær ◽  
William Collins ◽  
...  
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Models ◽  
Coupled Model ◽  
Internal Variability ◽  
Cmip5 Models ◽  
Model Intercomparison ◽  
Aerosol Forcing ◽  
Intercomparison Project ◽  
Effective Radiative Forcing

Abstract. The effective radiative forcing, which includes the instantaneous forcing plus adjustments from the atmosphere and surface, has emerged as the key metric of evaluating human and natural influence on the climate. We evaluate effective radiative forcing and adjustments in 17 contemporary climate models that are participating in the Coupled Model Intercomparison Project (CMIP6) and have contributed to the Radiative Forcing Model Intercomparison Project (RFMIP). Present-day (2014) global-mean anthropogenic forcing relative to pre-industrial (1850) levels from climate models stands at 2.00 (±0.23) W m−2, comprised of 1.81 (±0.09) W m−2 from CO2, 1.08 (± 0.21) W m−2 from other well-mixed greenhouse gases, −1.01 (± 0.23) W m−2 from aerosols and −0.09 (±0.13) W m−2 from land use change. Quoted uncertainties are 1 standard deviation across model best estimates, and 90 % confidence in the reported forcings, due to internal variability, is typically within 0.1 W m−2. The majority of the remaining 0.21 W m−2 is likely to be from ozone. In most cases, the largest contributors to the spread in effective radiative forcing (ERF) is from the instantaneous radiative forcing (IRF) and from cloud responses, particularly aerosol–cloud interactions to aerosol forcing. As determined in previous studies, cancellation of tropospheric and surface adjustments means that the stratospherically adjusted radiative forcing is approximately equal to ERF for greenhouse gas forcing but not for aerosols, and consequentially, not for the anthropogenic total. The spread of aerosol forcing ranges from −0.63 to −1.37 W m−2, exhibiting a less negative mean and narrower range compared to 10 CMIP5 models. The spread in 4×CO2 forcing has also narrowed in CMIP6 compared to 13 CMIP5 models. Aerosol forcing is uncorrelated with climate sensitivity. Therefore, there is no evidence to suggest that the increasing spread in climate sensitivity in CMIP6 models, particularly related to high-sensitivity models, is a consequence of a stronger negative present-day aerosol forcing and little evidence that modelling groups are systematically tuning climate sensitivity or aerosol forcing to recreate observed historical warming.

Probabilistic climate projections with Minimal CMIP Emulator (MCE)

2021 ◽  
Author(s):  
Junichi Tsutsui
Keyword(s):  
Climate Sensitivity ◽  
Radiative Forcing ◽  
Climate Models ◽  
Model Parameters ◽  
Climate Projections ◽  
Second Phase ◽  
Impulse Response Functions ◽  
Model Intercomparison ◽  
Probabilistic Climate Projections ◽  
Intercomparison Project

<p>One of the key applications of simple climate models is probabilistic climate projections to assess a variety of emission scenarios in terms of their compatibility with global warming mitigation goals. The second phase of the Reduced Complexity Model Intercomparison Project (RCMIP) compares nine participating models for their probabilistic projection methods through scenario experiments, focusing on consistency with given constraints for climate indicators including radiative forcing, carbon budget, warming trends, and climate sensitivity. The MCE is one of the nine models, recently developed by the author, and has produced results that well match the ranges of the constraints. The model is based on impulse response functions and parameterized physics of effective radiative forcing and carbon uptake over ocean and land. Perturbed model parameters are generated from statistical models and constrained with a Metropolis-Hastings independence sampler. A parameter subset associated with CO<sub>2</sub>-induced warming is assured to have a covariance structure as diagnosed from complex climate models of the Coupled Model Intercomparison Project (CMIP). The model's simplicity and the successful results imply that a method with less complicated structures and fewer control parameters has an advantage when building reasonable perturbed ensembles in a transparent way despite less capacity to emulate detailed Earth system components. Experimental results for future scenarios show that the climate sensitivity of CMIP models is overestimated overall, suggesting that probabilistic climate projections need to be constrained with observed warming trends.</p>

scholarly journals Stratocumulus Clouds in Southeastern Pacific Simulated by Eight CMIP5–CFMIP Global Climate Models

2014 ◽  
Vol 27 (8) ◽  
pp. 3000-3022 ◽  
Author(s):  
Jia-Lin Lin ◽  
Taotao Qian ◽  
Toshiaki Shinoda
Keyword(s):  
Cloud Cover ◽  
Large Scale ◽  
Climate Models ◽  
Global Climate ◽  
Cloud Feedback ◽  
Global Climate Models ◽  
Temperature Structure ◽  
Model Intercomparison ◽  
Stratocumulus Clouds ◽  
Intercomparison Project

Abstract This study examines the stratocumulus clouds and associated cloud feedback in the southeast Pacific (SEP) simulated by eight global climate models participating in phase 5 of the Coupled Model Intercomparison Project (CMIP5) and Cloud Feedback Model Intercomparison Project (CFMIP) using long-term observations of clouds, radiative fluxes, cloud radiative forcing (CRF), sea surface temperature (SST), and large-scale atmosphere environment. The results show that the state-of-the-art global climate models still have significant difficulty in simulating the SEP stratocumulus clouds and associated cloud feedback. Comparing with observations, the models tend to simulate significantly less cloud cover, higher cloud top, and a variety of unrealistic cloud albedo. The insufficient cloud cover leads to overly weak shortwave CRF and net CRF. Only two of the eight models capture the observed positive cloud feedback at subannual to decadal time scales. The cloud and radiation biases in the models are associated with 1) model biases in large-scale temperature structure including the lack of temperature inversion, insufficient lower troposphere stability (LTS), and insufficient reduction of LTS with local SST warming, and 2) improper model physics, especially insufficient increase of low cloud cover associated with larger LTS. The two models that arguably do best at simulating the stratocumulus clouds and associated cloud feedback are the only ones using cloud-top radiative cooling to drive boundary layer turbulence.

scholarly journals On the Correspondence between Mean Forecast Errors and Climate Errors in CMIP5 Models

2014 ◽  
Vol 27 (4) ◽  
pp. 1781-1798 ◽  
Author(s):  
H.-Y. Ma ◽  
S. Xie ◽  
S. A. Klein ◽  
K. D. Williams ◽  
J. S. Boyle ◽  
...  
Keyword(s):  
Large Scale ◽  
Climate Models ◽  
Systematic Errors ◽  
Cmip5 Models ◽  
Model Intercomparison ◽  
Short Term ◽  
Climate Simulations ◽  
Intercomparison Project ◽  
Short And Long Term

Abstract The present study examines the correspondence between short- and long-term systematic errors in five atmospheric models by comparing the 16 five-day hindcast ensembles from the Transpose Atmospheric Model Intercomparison Project II (Transpose-AMIP II) for July–August 2009 (short term) to the climate simulations from phase 5 of the Coupled Model Intercomparison Project (CMIP5) and AMIP for the June–August mean conditions of the years of 1979–2008 (long term). Because the short-term hindcasts were conducted with identical climate models used in the CMIP5/AMIP simulations, one can diagnose over what time scale systematic errors in these climate simulations develop, thus yielding insights into their origin through a seamless modeling approach. The analysis suggests that most systematic errors of precipitation, clouds, and radiation processes in the long-term climate runs are present by day 5 in ensemble average hindcasts in all models. Errors typically saturate after few days of hindcasts with amplitudes comparable to the climate errors, and the impacts of initial conditions on the simulated ensemble mean errors are relatively small. This robust bias correspondence suggests that these systematic errors across different models likely are initiated by model parameterizations since the atmospheric large-scale states remain close to observations in the first 2–3 days. However, biases associated with model physics can have impacts on the large-scale states by day 5, such as zonal winds, 2-m temperature, and sea level pressure, and the analysis further indicates a good correspondence between short- and long-term biases for these large-scale states. Therefore, improving individual model parameterizations in the hindcast mode could lead to the improvement of most climate models in simulating their climate mean state and potentially their future projections.

scholarly journals Eddy-resolving Simulation of CAS-LICOM3 for Phase 2 of the Ocean Model Intercomparison Project

2020 ◽  
Vol 37 (10) ◽  
pp. 1067-1080
Author(s):  
Yiwen Li ◽  
Hailong Liu ◽  
Mengrong Ding ◽  
Pengfei Lin ◽  
Zipeng Yu ◽  
...  
Keyword(s):  
Large Scale ◽  
Ocean Model ◽  
Meridional Overturning Circulation ◽  
Western Boundary ◽  
Preliminary Evaluation ◽  
Phase 2 ◽  
Model Intercomparison ◽  
Sst Variability ◽  
Intercomparison Project ◽  
Resolution Simulation

Abstract A 61-year (1958–2018) global eddy-resolving dataset for phase 2 of the Ocean Model Intercomparison Project has been produced by the version 3 of Chinese Academy of Science, the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics/Institute of Atmospheric Physics (LASG/IAP) Climate system Ocean Model (CAS-LICOM3). The monthly and a part of the surface daily data in this study can be accessed on the Earth System Grid Federation (ESGF) node. Besides the details of the model and experiments, the evolutions and spatial patterns of large-scale and mesoscale features are also presented. The mesoscale features are reproduced well in the high-resolution simulation, as the mesoscale activities can contribute up to 50% of the total SST variability in eddy-rich regions. Also, the large-scale circulations are remarkably improved compared with the low-resolution simulation, such as the climatological annual mean SST (the RMSE is reduced from 0.59°C to 0.47°C, globally) and the evolution of Atlantic Meridional Overturning Circulation. The preliminary evaluation also indicates that there are systematic biases in the salinity, the separation location of the western boundary currents, and the magnitude of eddy kinetic energy. All these biases are worthy of further investigation.

scholarly journals Could the Pliocene constrain the equilibrium climate sensitivity?

2016 ◽  
Vol 12 (8) ◽  
pp. 1591-1599 ◽  
Author(s):  
J. C. Hargreaves ◽  
J. D. Annan
Keyword(s):  
Climate Sensitivity ◽  
Atmospheric Carbon Dioxide ◽  
Climate Models ◽  
Climate Model ◽  
Temperature Anomaly ◽  
Model Intercomparison ◽  
Equilibrium Climate Sensitivity ◽  
Intercomparison Project ◽  
First Time ◽  
Industrial State

Abstract. The mid-Pliocene Warm Period (mPWP) is the most recent interval in which atmospheric carbon dioxide was substantially higher than in modern pre-industrial times. It is, therefore, a potentially valuable target for testing the ability of climate models to simulate climates warmer than the pre-industrial state. The recent Pliocene Model Intercomparison Project (PlioMIP) presented boundary conditions for the mPWP and a protocol for climate model experiments. Here we analyse results from the PlioMIP and, for the first time, discuss the potential for this interval to usefully constrain the equilibrium climate sensitivity. We observe a correlation in the ensemble between their tropical temperature anomalies at the mPWP and their equilibrium sensitivities. If the real world is assumed to also obey this relationship, then the reconstructed tropical temperature anomaly at the mPWP can in principle generate a constraint on the true sensitivity. Directly applying this methodology using available data yields a range for the equilibrium sensitivity of 1.9–3.7 °C, but there are considerable additional uncertainties surrounding the analysis which are not included in this estimate. We consider the extent to which these uncertainties may be better quantified and perhaps lessened in the next few years.

scholarly journals Large-scale features and evaluation of the PMIP4-CMIP6 <i>midHolocene</i> simulations

2020 ◽  
Vol 16 (5) ◽  
pp. 1847-1872 ◽  
Author(s):  
Chris M. Brierley ◽  
Anni Zhao ◽  
Sandy P. Harrison ◽  
Pascale Braconnot ◽  
Charles J. R. Williams ◽  
...  
Keyword(s):  
Large Scale ◽  
Climate Models ◽  
Hydrological Cycle ◽  
Global Climate ◽  
Coupled Model ◽  
Global Climate Models ◽  
Current Phase ◽  
Model Intercomparison ◽  
Global Mean Temperature ◽  
Intercomparison Project

Abstract. The mid-Holocene (6000 years ago) is a standard time period for the evaluation of the simulated response of global climate models using palaeoclimate reconstructions. The latest mid-Holocene simulations are a palaeoclimate entry card for the Palaeoclimate Model Intercomparison Project (PMIP4) component of the current phase of the Coupled Model Intercomparison Project (CMIP6) – hereafter referred to as PMIP4-CMIP6. Here we provide an initial analysis and evaluation of the results of the experiment for the mid-Holocene. We show that state-of-the-art models produce climate changes that are broadly consistent with theory and observations, including increased summer warming of the Northern Hemisphere and associated shifts in tropical rainfall. Many features of the PMIP4-CMIP6 simulations were present in the previous generation (PMIP3-CMIP5) of simulations. The PMIP4-CMIP6 ensemble for the mid-Holocene has a global mean temperature change of −0.3 K, which is −0.2 K cooler than the PMIP3-CMIP5 simulations predominantly as a result of the prescription of realistic greenhouse gas concentrations in PMIP4-CMIP6. Biases in the magnitude and the sign of regional responses identified in PMIP3-CMIP5, such as the amplification of the northern African monsoon, precipitation changes over Europe, and simulated aridity in mid-Eurasia, are still present in the PMIP4-CMIP6 simulations. Despite these issues, PMIP4-CMIP6 and the mid-Holocene provide an opportunity both for quantitative evaluation and derivation of emergent constraints on the hydrological cycle, feedback strength, and potentially climate sensitivity.

scholarly journals Evaluating the large-scale hydrological cycle response within the Pliocene Model Intercomparison Project Phase 2 (PlioMIP2) ensemble

2021 ◽  
Vol 17 (6) ◽  
pp. 2537-2558
Author(s):  
Zixuan Han ◽  
Qiong Zhang ◽  
Qiang Li ◽  
Ran Feng ◽  
Alan M. Haywood ◽  
...  
Keyword(s):  
Indian Ocean ◽  
Large Scale ◽  
Hydrological Cycle ◽  
Hadley Circulation ◽  
Dynamic Effect ◽  
Phase 2 ◽  
Model Intercomparison ◽  
Northern Indian Ocean ◽  
Thermodynamic Effect ◽  
Intercomparison Project

Abstract. The mid-Pliocene (∼3 Ma) is one of the most recent warm periods with high CO2 concentrations in the atmosphere and resulting high temperatures, and it is often cited as an analog for near-term future climate change. Here, we apply a moisture budget analysis to investigate the response of the large-scale hydrological cycle at low latitudes within a 13-model ensemble from the Pliocene Model Intercomparison Project Phase 2 (PlioMIP2). The results show that increased atmospheric moisture content within the mid-Pliocene ensemble (due to the thermodynamic effect) results in wetter conditions over the deep tropics, i.e., the Pacific intertropical convergence zone (ITCZ) and the Maritime Continent, and drier conditions over the subtropics. Note that the dynamic effect plays a more important role than the thermodynamic effect in regional precipitation minus evaporation (PmE) changes (i.e., northward ITCZ shift and wetter northern Indian Ocean). The thermodynamic effect is offset to some extent by a dynamic effect involving a northward shift of the Hadley circulation that dries the deep tropics and moistens the subtropics in the Northern Hemisphere (i.e., the subtropical Pacific). From the perspective of Earth's energy budget, the enhanced southward cross-equatorial atmospheric transport (0.22 PW), induced by the hemispheric asymmetries of the atmospheric energy, favors an approximately 1∘ northward shift of the ITCZ. The shift of the ITCZ reorganizes atmospheric circulation, favoring a northward shift of the Hadley circulation. In addition, the Walker circulation consistently shifts westward within PlioMIP2 models, leading to wetter conditions over the northern Indian Ocean. The PlioMIP2 ensemble highlights that an imbalance of interhemispheric atmospheric energy during the mid-Pliocene could have led to changes in the dynamic effect, offsetting the thermodynamic effect and, hence, altering mid-Pliocene hydroclimate.

Sign in / Sign up

Export Citation Format

Share Document