The Cer massif in the internal Dinarides: Exhumation triggered as a far-field effect of the Carpathian slab roll-back

2021 ◽  
Author(s):  
Georg Löwe ◽  
Susanne Schneider ◽  
Blanka Sperner ◽  
Philipp Balling ◽  
Jörg Pfänder ◽  
...  
Keyword(s):  
Shear Zone ◽  
Late Cretaceous ◽  
Pannonian Basin ◽  
Structural Data ◽  
Shear Zones ◽  
White Mica ◽  
Step Heating ◽  
Type Granite ◽  
Single Grain ◽  
Internal Dinarides

<p>Extension across the southern Pannonian Basin and the internal Dinarides is characterized by the occurrence of a chain of Oligo-Miocene metamorphic core complexes (MCCs) exhumed along mylonitic low-angle extensional shear zones which in part represent former suturing thrusts. Cer MCC at the transition between the internal Dinarides and the Pannonian Basin occupies a structural position within the distal-most Adriatic thrust sheet and originates from two different tectonic processes: Late Cretaceous-Paleogene nappe-stacking during continent-continent collision between Adria and fragments of European lithosphere with Adria residing in a lower plate position, followed by Miocene exhumation. Structural data and a balanced cross section through the Cer massif show that the exhuming shear zone links to a breakaway fault, which reactivated the early Late Cretaceous most internal nappe contact between the two distal-most Adriatic thrust sheets. At Cer MCC, Paleozoic greenschist- to amphibolite-grade lithologies surround a polyphase intrusion composed of I- and S-type granites. These lithologies were exhumed along the shear zone by top-N transport. Thermobarometric analyses indicate an intrusion depth of 7-8 km of the Oligocene I-type granite; cooling below ~500°C occurred at 25.4±0.6 Ma (1σ) yielded by <sup>40</sup>Ar/<sup>39</sup>Ar dating of hornblende. Biotite and white mica from this intrusion as well as from the mylonitic shear zone yield <sup>40</sup>Ar/<sup>39</sup>Ar ages of 17-18 Ma independent of the used techniques (in-situ laser ablation, single-grain total fusion, single-grain step heating, and multi-grain step heating). White mica from the S-type granite yield an <sup>40</sup>Ar/<sup>39</sup>Ar age of 16.7±0.1 Ma (1σ). Associated dikes intruding the shear zone were also affected by N-S extension, indicating that deformation was still ongoing at that time. Our data suggests that exhumation of the MCC was related to the opening of the Pannonian back-arc basin in response to the Carpathian slab-rollback and triggered extensional reactivation of thrusts in the internal Dinarides.</p>

scholarly journals In Situ and Step‐Heating 40 Ar/ 39 Ar Dating of White Mica in Low‐Temperature Shear Zones (Tenda Massif, Alpine Corsica, France)

Tectonics ◽  
2020 ◽  
Vol 39 (12) ◽  
Author(s):  
Alexandre Beaudoin ◽  
Stéphane Scaillet ◽  
Nicolas Mora ◽  
Laurent Jolivet ◽  
Romain Augier
Keyword(s):  
Low Temperature ◽  
Shear Zones ◽  
White Mica ◽  
Step Heating ◽  
Temperature Shear

Geochronological evidence for repeated brittle reactivations of a pre-existing plastic shear zone: The Himdalen–Ørje deformation zone, Southern Norway

2021 ◽  
Author(s):  
Espen Torgersen ◽  
Roy Gabrielsen ◽  
Johan Petter Nystuen ◽  
Roelant van der Lelij ◽  
Morgan Ganerød ◽  
...  
Keyword(s):  
Shear Zone ◽  
Deformation Zone ◽  
Shear Zones ◽  
White Mica ◽  
Fault Gouge ◽  
Plastic Shear ◽  
Brittle Deformation ◽  
Sveconorwegian Orogen ◽  
Fault Gouges ◽  
Southern Norway

<p>It is well known that faults, once formed, become permanent weaknesses in the crust, localizing subsequent brittle strain increments. The case of repeated brittle reactivations localized along pre-existing plastic shear zones is less recognized, although this situation is frequently observed in many geologically old terranes.</p><p>We have studied the prolonged deformation history of the Himdalen–Ørje Deformation Zone (HØDZ) in SE Norway by combining K–Ar and <sup>40</sup>Ar–<sup>39</sup>Ar geochronology with structural analysis. The HØDZ consists of a large variation of deformation products from mylonites and cataclasites to pseudotachylites and fault gouge. Several generations of mylonites make up the ductile part of HØDZ, called the Ørje shear zone, a km-think SW-dipping shear zone within the late Mesoproterozoic Sveconorwegian orogen. <sup>40</sup>Ar–<sup>39</sup>Ar dating of white mica from one of these mylonites give a plateau age of c. 908 Ma, interpreted to constrain the timing of late-Sveconorwegian extensionial reactivation of the Ørje shear zone.</p><p>This mylonitic fabric is extensively reworked in a brittle fashion along the SW-dipping Himdalen fault, a 10–25 m thick fault zone of cataclasite, breccia, fault gouge and, in places, abundant pseduotachylite veins. <sup>40</sup>Ar–<sup>39</sup>Ar dating of pseduotachylite material gives several small plateaus between c. 375 and 300 Ma, whereas K-feldspar clasts from the cataclasitically deformed host rock carry a Caledonian signal (plateau at c. 435 Ma). K–Ar dating of three fault gouges constrain the timing of gouge development at c. 270 and 200 Ma. Two of the fault gouges also contain protolithic K-bearing mineral phases that overlap in age with the c. 375 Ma pseudotachylite <sup>40</sup>Ar–<sup>39</sup>Ar plateau age, consistent with field observations of the former reworking the latter.</p><p>In sum, the HØDZ records multiple Paleozoic and Mesozoic brittle reactivations of the early Neoproterozoic (and older) mylonitic Ørje shear zone. Most of the brittle deformation is interpreted to have accumulated during development of the Permian Oslo rift and its subsequent latest Triassic evolution. The suggested late Devonian (c. 375 Ma) initiation of brittle deformation does not have a clear tectonic association, but we speculate that it relates to strike-slip displacements caused by the Variscan orogen, as also suggested for the sub-parallel Tornquist zone to the south.</p>

Complex kinematics in a major ductile shear zone, NW Shetland: Evidence of ductile extrusion during Caledonian transpression

2021 ◽  
Author(s):  
Timothy Armitage ◽  
Robert Holdsworth ◽  
Robin Strachan ◽  
Thomas Zach ◽  
Diana Alvarez-Ruiz ◽  
...  
Keyword(s):  
Shear Zone ◽  
Hanging Wall ◽  
Regional Scale ◽  
Shear Zones ◽  
White Mica ◽  
Strike Slip ◽  
Amphibolite Facies ◽  
Lateral Extrusion ◽  
Shear Sense ◽  
Ductile Shear

<p>Ductile shear zones are heterogeneous areas of strain localisation which often display variation in strain geometry and combinations of coaxial and non-coaxial deformation. One such heterogeneous shear zone is the c. 2 km thick Uyea Shear Zone (USZ) in northwest Mainland Shetland (UK), which separates variably deformed Neoarchaean orthogneisses in its footwall from Neoproterozoic metasediments in its hanging wall (Fig. a). The USZ is characterised by decimetre-scale layers of dip-slip thrusting and extension, strike-slip sinistral and dextral shear senses and interleaved ultramylonitic coaxially deformed horizons. Within the zones of transition between shear sense layers, mineral lineations swing from foliation down-dip to foliation-parallel in kinematically compatible, anticlockwise/clockwise-rotations on a local and regional scale (Fig. b). Rb-Sr dating of white mica grains via laser ablation indicates a c. 440-425 Ma Caledonian age for dip-slip and strike-slip layers and an 800 Ma Neoproterozoic age for coaxial layers. Quartz opening angles and microstructures suggest an upper-greenschist to lower-amphibolite facies temperature for deformation. We propose that a Neoproterozoic, coaxial event is overprinted by Caledonian sinistral transpression under upper greenschist/lower amphibolite facies conditions. Interleaved kinematics and mineral lineation swings are attributed to result from differential flow rates resulting in vertical and lateral extrusion and indicate regional-scale sinistral transpression during the Caledonian orogeny in NW Shetland. This study highlights the importance of linking geochronology to microstructures in a poly-deformed terrane and is a rare example of a highly heterogeneous shear zone in which both vertical and lateral extrusion occurred during transpression.</p><p><img src="https://contentmanager.copernicus.org/fileStorageProxy.php?f=gepj.0cf6ef44e5ff57820599061/sdaolpUECMynit/12UGE&app=m&a=0&c=d96bb6db75eed0739f2a6ee90c9ad8fd&ct=x&pn=gepj.elif&d=1" alt=""></p>

40Ar–39Ar ages for detrital white mica in Meguma terrane, Nova Scotia, Canada: implications for provenance of the Goldenville and Halifax groups

2012 ◽  
Vol 49 (7) ◽  
pp. 781-795 ◽  
Author(s):  
P.H. Reynolds ◽  
C.E. White ◽  
S.M. Barr ◽  
C.M. Muir
Keyword(s):  
Nova Scotia ◽  
Source Region ◽  
White Mica ◽  
Source Rocks ◽  
Low Grade ◽  
Rock Formation ◽  
Step Heating ◽  
Single Grain ◽  
Meguma Terrane ◽  
Late Neoproterozoic

Single-grain 40Ar/39Ar ages are reported for detrital white mica, along with conventional step-heating data for whole rocks, from low-grade metasandstone samples from the Goldenville, Halifax, and Rockville Notch groups in the Meguma terrane of southern Nova Scotia. The majority (166) of single grains from 11 samples yielded ages between ca. 615 and 350 Ma, and the remaining 12 grains yielded ages between ca. 1900 and 870 Ma. The late Neoproterozoic–Paleozoic age distributions are consistent with derivation of sediments from the rapidly uplifted flanks of an active rift, where partial to complete resetting of white mica ages occurred at ca. 520–500 Ma, preceding sediment deposition. The ca. 615 Ma ages may be relics of the original detrital white mica that existed in the source rocks prior to the rifting event. Ages from the Upper Silurian White Rock Formation appear to reflect this same ca. 520–500 Ma event, suggesting that sediments in the White Rock Formation were recycled from the Goldenville and Halifax groups. The older Precambrian ages are inferred to represent white mica in the source region, likely Amazonia. The whole-rock age spectra are discordant, with pronounced age gradients and no well-defined age plateaus. Initial gas released from five of the samples at low laboratory extraction temperatures (ca. 450–500 °C) yielded ages of ca. 260–300 Ma, not seen in the single-grain data, whereas gas released at the highest extraction temperatures yielded ages in the range ca. 510–530 Ma, possibly reflecting the principal result obtained from the single-grain data.

scholarly journals Origin of sediments during Cretaceous continent—continent collision in the Romanian Southern Carpathians: preliminary constraints from 40Ar/39Ar single-grain dating of detrital white mica

2013 ◽  
Vol 64 (5) ◽  
pp. 375-382 ◽  
Author(s):  
Franz Neubauer ◽  
Ana-Voica Bojar
Keyword(s):  
Late Jurassic ◽  
Upper Cretaceous ◽  
Shear Zones ◽  
White Mica ◽  
Low Grade ◽  
Late Permian ◽  
Ductile Shear Zones ◽  
Single Grain ◽  
Ductile Shear ◽  
Southern Carpathians

Abstract Single grains of detrital white mica from the lowermost Upper Cretaceous Sinaia Flysch have been dated using the 40Ar/39Ar technique. The Sinaia Flysch was deposited in a trench between the Danubian and Getic microcontinental pieces after the closure of the Severin oceanic tract. The Danubian basement is largely composed of a Panafrican/Cadomian basement in contrast to the Getic/Supragetic units with a Variscan-aged basement, allowing the distinction between these two blocks. Dating of detrital mica from the Sinaia Flysch resulted in predominantly Variscan ages (329 ± 3 and 288 ± 4 Ma), which prove the Getic/Supragetic source of the infill of the Sinaia Trench. Subordinate Late Permian (263 ± 8 and 255 ±10 Ma), Early Jurassic (185 ± 4 and 183 ± 3 Ma) and Late Jurassic/Early Cretaceous (149 ± 3 and 140 ± 3 Ma) ages as well as a single Cretaceous age (98 ± 4 Ma) are interpreted as representing the exposure of likely retrogressive low-grade metamorphic ductile shear zones of various ages. Ductile shear zones with similar 40Ar/39Ar white mica ages are known in the Getic/Supragetic units. The Cretaceous ages also show that Cretaceous metamorphic units were already subject to erosion during the deposition of the Sinaia Flysch.

The Ailao Shan–Red River shear zone revisited: Timing and tectonic implications

2019 ◽  
Vol 132 (5-6) ◽  
pp. 1165-1182 ◽  
Author(s):  
Junlai Liu ◽  
Xiaoyu Chen ◽  
Yuan Tang ◽  
Zhijie Song ◽  
Wei Wang
Keyword(s):  
Shear Zone ◽  
Structural Data ◽  
Shear Zones ◽  
Red River ◽  
Plate Convergence ◽  
Ductile Shearing ◽  
Magma Sources ◽  
T Values ◽  
Tectonic Extrusion ◽  
Lower Crustal

Abstract Continental strike-slip shear zones that may bear important information about the evolution of convergent tectonics often occur to accommodate plate convergence. When and how shearing along the shear zones responds to plate interactions, however, are often debated. In this study, we investigated the Oligocene–Miocene leucocratic dikes from the Ailao Shan–Red River shear zone, which was active during India-Eurasia plate convergence, to constrain the timing and mechanism of ductile shearing along the shear zone. The dikes are structurally grouped into pre-, syn-, and postkinematic types with respect to ductile shearing. Prekinematic dikes from ca. 41 to 30 Ma have low whole-rock 87Sr/86Sr(i) values (0.707–0.710), generally high εNd(t) values (–3.31∼–7.98), and variable εHf(t) values (–7.9∼+5.7). Their magma sources involved high thermal perturbation inducing partial melting of the lower crust, and contributions from the mantle that were possibly related to extensional collapse of the orogenic belt prior to tectonic extrusion of the Sundaland block. Syn- and postkinematic dikes from ca. 28 to 20 Ma dominantly have high whole-rock 87Sr/86Sr(i) (0.707–0.725) and low εNd(t) (–5.83 to –9.76) values, and either negative or positive zircon εHf(t) values (broadly in the range of –12 to + 7.6) for coeval but separate crustal magma sources. The results imply that major shearing accompanying retrograde metamorphism along the Ailao Shan–Red River shear zone was localized to crustal level. A synthesis of regional structural data suggests that Oligocene–Miocene shearing along the Ailao Shan–Red River shear zone and lateral tectonic extrusion of the Sundaland block proceeded in response to progressive India-Eurasia plate convergence. Distributed and inhomogeneous middle- to lower-crustal flow along the boundaries of and within the Sundaland block occurred during the tectonic extrusion.

On the causes of brittle nucleation of shear zones: the example of Cap de Creus, Eastern Pyrenees (Spain)

2020 ◽  
Author(s):  
Claudio Rosenberg ◽  
Loïc Labrousse ◽  
Nicolas Landry ◽  
Elena Druguet ◽  
Jordi Carreras
Keyword(s):  
Grain Boundaries ◽  
Shear Zone ◽  
Deformation Temperature ◽  
Shear Zones ◽  
Nucleation And Growth ◽  
White Mica ◽  
Fracture Plane ◽  
Fracture Planes ◽  
Ductile Shear Zones ◽  
Ductile Shear

<p>The area of Cap de Creus, at the eastern termination of the Axial Zone of the Pyrenean Belt, exposes some of the most famous outcrops of ductile shear zones and shear zone networks (Carreras, 2001). Recent studies proposed that the nucleation and growth of such shear zones may have taken place by brittle processes (Fusseis et al., 2006; Fusseis and Handy, 2008).</p><p>The present study investigates the geometrical relationships between fracture systems and some shear zones, the deformation temperature of these shear zones, and the processes leading to the nucleation and growth of shear zones along fracture planes. We selected two areas of the Cap de Creus, the Cala d’Agulles, and the Punta de Cap de Creus, because they are most intensely dissected by subparallel sets of shear zones and fractures. The orientation of the average shear zone planes is sub-parallel to the orientation of the major set of fractures, and the great extent and close spacing of some shear zones that we characterized by aerial photos from a drone, is similar to the distribution and extent of the fracture planes. These observations, in addition to those of Fusseis et al. (2006) suggest that the shear zones nucleated on previous fracture planes. </p><p>These fractures are surrounded by haloes of nearly 1 cm thickness affecting the fabric of the country rock, an amphibolite-facies, biotite-andalusite bearing schist. Microscopic observations show that the haloes correspond to the wide-spread presence of thin (less than 2µm thickness) phosphate seams coating the grain boundaries, preferentially those oriented at low angle to the fracture plane, and to the alteration of plagioclase to white mica and sericite, and to the growth of tourmaline, also related to grain boundaries and micro-fractures.</p><p>Deformation temperature in the shear zones is assessed by white mica thermometry and pseudosections. The calculated T of at least 350-400° C is consistent with qualitative observations showing the presence of stable biotite within very fine-grained (<< 10 µm) shear bands and the recrystallization of quartz by rotation of sub-grain boundaries.</p><p>In summary, fractures formed at high temperature, possibly associated with the intrusion of tourmaline-bearing pegmatites and fluids, which predate the ductile mylonitic event (Druguet, 2001; Van Lichtervelde et al., 2017). Fluids altered and weakened a volume of approximately 2 cm thickness all along the fracture planes, whose extent may reach > 100 m. The inferred, relatively high T of ca.  400° C indicates that fracturing is not due to the proximity of the brittle-ductile transition. In addition, no significant micro-fracturing of the mylonites is observed in thin sections. Therefore, fracturing precedes the ductile shear zones, which nucleate on some of the “inherited” sets of thin, planar, weakened structures, the large majority of which remains undeformed. These observations raise the question on whether nucleation and propagation of ductile shear zones is mechanically unrelated to brittle fracturing. Their weakening of planar structures would originate from fluid migration along fracture planes, but fracturing would no longer be active during ductile deformation.</p>

Dating extensional deformation to unravel exhumation patterns in the Internal Dinarides

2020 ◽  
Author(s):  
Georg Löwe ◽  
Susanne Schneider ◽  
Jörg A. Pfänder ◽  
Kamil Ustaszewski
Keyword(s):  
Structural Integrity ◽  
Pannonian Basin ◽  
Noble Gas ◽  
White Mica ◽  
Passive Margin ◽  
Time Interval ◽  
Accretionary Wedge ◽  
Extensional Deformation ◽  
Age Variations ◽  
Internal Dinarides

<p>Ar/Ar-in-situ geochronology by laser ablation NGMS (noble gas mass spectrometry) provides a powerful tool to determine inter- and intra-granular age variations of potassium-bearing minerals while maintaining the structural integrity of a sample. This makes it an excellent method in targeting the understanding of the post-collisional evolution of an orogen by dating different mica generations. In order to investigate the timing of exhumation related to extensional deformation in the Internal Dinarides, we sampled paragneisses from the upper greenschist- to amphibolite-grade mylonitic detachment zones of two metamorphic core complexes (MCC’s). The MCC’s are located at the distal Adriatic passive margin (Cer MCC, central western Serbia) and within the Late Cretaceous suturing accretionary wedge complex (Motajica MCC, northern Bosnia and Herzegovina) that separates Adria-derived units from blocks of European affinity.</p><p>Mica grains were assigned to either pre-kinematic or syn-kinematic growth, according to their structural context, texture and grainsize. Pre-kinematic growth is characterized by large, deformed minerals of up to 3.5 mm in size, while rather fine-grained, recrystallized mineral aggregates that usually formed in the strain shadow of larger clasts represent syn-kinematic growth.</p><p>The ages of pre-kinematic white mica from paragneisses of the Motajica detachment range from approx. 80 to 25 Ma. They partly show a large intra-granular age spread characterized by significantly older core ages becoming progressively younger towards the rim. This pattern likely suggests diffusive loss of radiogenic Ar. Ages between 80-55 Ma in the central parts of the grains, associated with a top-W transport direction, are interpreted as the time interval of mineral growth and subsequent deformation in an accretionary wedge during E-ward subduction of the Adriatic passive margin underneath European units.</p><p>Syn-kinematic white mica from Motajica yielded ages between 22 and 16 Ma, which are interpreted as the time of peak activity of extension. This also corresponds with the time of crustal extension in the Pannonian Basin to the north. At Cer MCC, located roughly 150 km ENE of Motajica MCC and structurally below the accretionary wedge complex, ages of deformed white mica indicate exhumation between 19 and 15 Ma with a top-N directed transport.  </p><p>Our results suggest that the opening of the Pannonian Basin in response to slab-retreat underneath the Carpathian orogen resulted in the extensional reactivation of suturing thrusts that separated Adriatic from European units, leading to exhumation of parts of the accretionary wedge (Motajica MCC). This event was followed by the progressive exhumation of the passive Adriatic margin (Cer MCC) that occupied a structural position below the suturing accretionary wedge.</p>

Superposition of nappe stacking and extensional exhumation in the Sierra de los Filabres (Southeast Spain)

2020 ◽  
Author(s):  
Kristóf Porkoláb ◽  
Jasper Hupkes ◽  
Liviu Matenco ◽  
Ernst Willingshofer ◽  
Jan Wijbrans
Keyword(s):  
Shear Zones ◽  
White Mica ◽  
Amphibolite Facies ◽  
Mountain Range ◽  
Lower Grade ◽  
Tectonic Plate ◽  
Ductile Shearing ◽  
Single Grain ◽  
Tectonic Reconstructions ◽  
Natural Laboratory

<p>The Sierra de los Filabres mountain range in the Betics system of SE Spain is one of the best natural laboratory to investigate processes associated with nappe stacking and subsequent exhumation of metamorphic rocks during the orogenic evolution. Existing research separates the Iberia-derived high-pressure, amphibolite facies Nevado-Fillabrides complex in a lower tectonic plate position from the lower grade ALCAPECA microcontinent-derived Alpujárride complex in an upper tectonic plate position. Their nappe-stack contact is also defined as an extensional detachment that controls the exhumation of the higher grade Nevado-Fillabrides complex. We have tested this model with a detailed (micro-)structural and lithological analysis complemented by <sup>40</sup>Ar/<sup>39</sup>Ar white mica dating of key shear zones. We aim to define key shear zones that separate different tectonic units, to determine the kinematics and timing of main deformation phases, and to understand the interplay between burial and exhumation structures. The results show that shearing related to the subduction burial up to the amphibolite facies is ~ top-NW in present-day coordinates. Three amphibolite facies nappe units are distinguished, which may correspond to proximal and more distal parts of the former hyper-extended Iberian margin. The bottom and top nappes consist of continental material, while the middle nappe is largely made of mafic and ultramafic rocks. Top-NW shearing was coeval with the isoclinal and tight asymmetric folding of the formations. These structures were overprinted by upright folds and greenschist facies shear zones that still developed under compression. These contractional structures are cross-cut by ~ top-W shear zones associated with exhumation that show evidences of gradually decreasing P-T conditions during extension from ductile shearing to normal faulting. We show that the same protolith can be followed in amphibolite grade below and in low greenschists grade above the main extensional detachment. This demonstrates that the extensional detachment did not follow and reactivate exactly the former nappe contact between the Nevado-Fillabrides and Alpujárride complexes. Our single grain fusion <sup>40</sup>Ar/<sup>39</sup>Ar ages on white micas show a range of 10 to 20 Ma in case of nappe contacts or extensional shear zones, while yield a significantly older, 25-40 Ma age cluster in case of a sample far away from the main shear zones in the core of the Nevado-Fillabrides dome. This age cluster could either represent excess Ar in the sample, or resetting due to a distinct tectono-metamorphic event that occurred prior to the Early Miocene subduction of the Nevado-Fillabrides complex. The latter case would require the reconsideration of recent tectonic reconstructions of the region.</p>

Sign in / Sign up

Export Citation Format

Share Document