Joint assimilation of GRACE satellite and in-situ discharge observations into a global hydrological model

2021 ◽  
Author(s):  
Kerstin Schulze ◽  
Olga Engels ◽  
Jürgen Kusche ◽  
Helena Gerdener ◽  
Hannes Müller Schmied ◽  
...  
Keyword(s):  
Mississippi River ◽  
Water Cycle ◽  
Climate Forcing ◽  
Model Parameters ◽  
Multiple Observations ◽  
Grace Data ◽  
Freshwater System ◽  
Grace Satellite ◽  
Ocean Topography

<p>Global hydrological models simulate water storages and fluxes of the water cycle which is important for e.g. water management decisions and drought/flood predictions. However, the models include many uncertainties due to the model inputs (e.g. climate forcing data), model parameters, and model structure resulting in disagreements with observations. To reduce these uncertainties, the models are typically calibrated against in-situ discharge observations or GRACE-derived total water storage anomalies (TWSA) are integrated into the model by data assimilation.</p><p>In this study, we introduce a framework for jointly assimilating multiple observations into the WaterGAP 2.2d model over the Mississippi River Basin for 2003-2018. We do not only assimilate GRACE-derived TWSA but also in-situ discharge observations from gauge stations. In addition, we vary the number as well as the location of the considered discharge stations to derive information about e.g. the influence of assimilating down- or upstream stations.</p><p>Our results show a strong influence of the GRACE data and that the assimilation of multiple discharge stations resembles the results of a traditional calibration approach. We expect the most downstream stations to have a larger impact on the assimilation results than the more upstream stations (as the downstream stations already include the information of the upstream stations). The gained insights of this study show a great potential to better assess and understand the global freshwater system and become even more relevant in view of the Surface Water and Ocean Topography (SWOT) satellite. SWOT will be launched in 2022 and is expected to allow the derivation of discharge observations globally for rivers wider than 50-100m.</p>

scholarly journals The Review of GRACE Data Applications in Terrestrial Hydrology Monitoring

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Dong Jiang ◽  
Jianhua Wang ◽  
Yaohuan Huang ◽  
Kang Zhou ◽  
Xiangyi Ding ◽  
...  
Keyword(s):  
Large Scale ◽  
Water Cycle ◽  
Grace Data ◽  
Monitoring Result ◽  
Terrestrial Water ◽  
Terrestrial Hydrology ◽  
Grace Satellite ◽  
Gravity Recovery ◽  
Storage Change ◽  
Hydrological Monitoring

The Gravity Recovery and Climate Experiment (GRACE) satellite provides a new method for terrestrial hydrology research, which can be used for improving the monitoring result of the spatial and temporal changes of water cycle at large scale quickly. The paper presents a review of recent applications of GRACE data in terrestrial hydrology monitoring. Firstly, the scientific GRACE dataset is briefly introduced. Recently main applications of GRACE data in terrestrial hydrological monitoring at large scale, including terrestrial water storage change evaluation, hydrological components of groundwater and evapotranspiration (ET) retrieving, droughts analysis, and glacier response of global change, are described. Both advantages and limitations of GRACE data applications are then discussed. Recommendations for further research of the terrestrial water monitoring based on GRACE data are also proposed.

Effect of joint assimilation of GRACE and discharge observations on simulated water storages and fluxes

2020 ◽  
Author(s):  
Kerstin Schulze ◽  
Jürgen Kusche ◽  
Olga Engels ◽  
Petra Döll ◽  
Somayeh Shadkam ◽  
...  
Keyword(s):  
Data Assimilation ◽  
Mississippi River ◽  
Water Resource Management ◽  
Water Cycle ◽  
Time Frame ◽  
Model Parameters ◽  
Hydrological Models ◽  
Realistic Representation ◽  
Single Data ◽  
Gravity Recovery

<p>Several applications, from water resource management to the prediction of extreme events, require a realistic representation of the global water cycle. Global hydrological models simulate continental water fluxes and individual storages. However, they poorly reproduce observations of discharge and total water storage anomalies (TWSA). To improve the realism of the simulations, TWSA derived from the Gravity Recovery and Climate Experiment (GRACE) mission are usually assimilated into hydrological models.<br>However, while assimilating GRACE-TWSA yields more realistic TWSA simulations, it is not clear how it affects the simulation of individual storages and fluxes. Therefore, assimilating discharge, in-situ or derived from satellite-altimetry, has been suggested to improve simulated discharge which is especially important for ungauged parts of basins.</p><p>In this study, we jointly assimilate GRACE-TWSA and discharge observations and, for the first time, simultaneously calibrate the model parameters in order to improve the simulation skills of the model beyond the observational time frame. For this, we couple the WaterGAP 2.2d model with the Parallel Data Assimilation Framework and apply an Ensemble Kalman Filter for the Mississippi River Basin from 2003 to 2016. Furthermore, we compare our results to single-data assimilation and validate them against discharge observations that were not used for calibration/assimilation. Additionally, we analyze the effect of the calibrated parameters on the model’s realism.</p>

scholarly journals Potential and Limitations of Satellite Altimetry Constellations for Monitoring Surface Water Storage Changes—A Case Study in the Mississippi Basin

2020 ◽  
Vol 12 (20) ◽  
pp. 3320
Author(s):  
Denise Dettmering ◽  
Laura Ellenbeck ◽  
Daniel Scherer ◽  
Christian Schwatke ◽  
Christoph Niemann
Keyword(s):  
Surface Water ◽  
Mississippi River ◽  
Satellite Altimetry ◽  
Remote Sensing Data ◽  
Water Area ◽  
Water Levels ◽  
In Situ Data ◽  
Ocean Topography

Remote sensing data are essential for monitoring the Earth’s surface waters, especially since the amount of publicly available in-situ data is declining. Satellite altimetry provides valuable information on the water levels and variations of lakes, reservoirs and rivers. In combination with satellite imagery, the derived time series allow the monitoring of lake storage changes and river discharge. However, satellite altimetry is limited in terms of its spatial resolution due to its measurement geometry, only providing information in the nadir direction beneath the satellite’s orbit. In a case study in the Mississippi River Basin (MRB), this study investigates the potential and limitations of past and current satellite missions for the monitoring of basin-wide storage changes. For that purpose, an automated target detection is developed and the extracted lake surfaces are merged with the satellites’ tracks. This reveals that the current altimeter configuration misses about 80% of all lakes larger than 0.1 km2 in the MRB and 20% of lakes larger than 10 km2, corresponding to 30% and 7% of the total water area, respectively. Past altimetry configurations perform even more poorly. From the larger water bodies represented by a global hydrology model, at least 91% of targets and 98% of storage changes are captured by the current altimeter configuration. This will improve significantly with the launch of the planned Surface Water and Ocean Topography (SWOT) mission.

scholarly journals Spatio-Temporal Patterns of Mass Changes in Himalayan Glaciated Region from EOF Analyses of GRACE Data

2021 ◽  
Vol 13 (2) ◽  
pp. 265
Author(s):  
Harika Munagapati ◽  
Virendra M. Tiwari
Keyword(s):  
Temperature Anomaly ◽  
Mass Gain ◽  
Snow Accumulation ◽  
Empirical Orthogonal Functions ◽  
Total Water ◽  
Orthogonal Functions ◽  
Grace Data ◽  
Grace Satellite ◽  
Spatio Temporal ◽  
Gravity Recovery

The nature of hydrological seasonality over the Himalayan Glaciated Region (HGR) is complex due to varied precipitation patterns. The present study attempts to exemplify the spatio-temporal variation of hydrological mass over the HGR using time-variable gravity from the Gravity Recovery and Climate Experiment (GRACE) satellite for the period of 2002–2016 on seasonal and interannual timescales. The mass signal derived from GRACE data is decomposed using empirical orthogonal functions (EOFs), allowing us to identify the three broad divisions of HGR, i.e., western, central, and eastern, based on the seasonal mass gain or loss that corresponds to prevailing climatic changes. Further, causative relationships between climatic variables and the EOF decomposed signals are explored using the Granger causality algorithm. It appears that a causal relationship exists between total precipitation and total water storage from GRACE. EOF modes also indicate certain regional anomalies such as the Karakoram mass gain, which represents ongoing snow accumulation. Our causality result suggests that the excessive snowfall in 2005–2008 has initiated this mass gain. However, as our results indicate, despite the dampening of snowfall rates after 2008, mass has been steadily increasing in the Karakorum, which is attributed to the flattening of the temperature anomaly curve and subsequent lower melting after 2008.

scholarly journals Magnetometer data from the GRACE satellite duo

2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Nils Olsen
Keyword(s):  
Mean Squared Error ◽  
Incident Angle ◽  
Magnetic Data ◽  
Grace Data ◽  
Magnetometer Data ◽  
Geophysical Investigations ◽  
Grace Satellites ◽  
Grace Satellite ◽  
The Difference ◽  
Grace Mission

AbstractThis paper describes and discusses the preprocessing and calibration of the magnetic data taken by the navigational magnetometers onboard the two GRACE satellites, with focus on the almost 10 years period from January 2008 to the end of the GRACE mission in October 2017 for which 1-Hz magnetic data are available. A calibration of the magnetic data is performed by comparing the raw magnetometer sensor readings with model magnetic vector values as provided by the CHAOS-7 geomagnetic field model for the time and position of the GRACE data. The presented approach also accounts for magnetic disturbances produced by the satellite’s magnetorquer and for temperature effects, which are parametrized by the Sun incident angle. The root-mean-squared error of the difference between the calibrated data and CHAOS-7 model values is about 10 nT, which makes the GRACE magnetometer data relevant for geophysical investigations.

scholarly journals In-Situ Measurement of Power Loss for Crystalline Silicon Modules Undergoing Thermal Cycling and Mechanical Loading Stress Testing

Energies ◽  
2020 ◽  
Vol 14 (1) ◽  
pp. 72
Author(s):  
Sergiu Spataru ◽  
Peter Hacke ◽  
Dezso Sera
Keyword(s):  
Thermal Cycling ◽  
Power Loss ◽  
Stress Testing ◽  
Series Resistance ◽  
Short Circuit ◽  
In Situ Measurement ◽  
Mechanical Degradation ◽  
Model Parameters ◽  
The Impact

An in-situ method is proposed for monitoring and estimating the power degradation of mc-Si photovoltaic (PV) modules undergoing thermo-mechanical degradation tests that primarily manifest through cell cracking, such as mechanical load tests, thermal cycling and humidity freeze tests. The method is based on in-situ measurement of the module’s dark current-voltage (I-V) characteristic curve during the stress test, as well as initial and final module flash testing on a Sun simulator. The method uses superposition of the dark I-V curve with final flash test module short-circuit current to account for shunt and junction recombination losses, as well as series resistance estimation from the in-situ measured dark I-Vs and final flash test measurements. The method is developed based on mc-Si standard modules undergoing several stages of thermo-mechanical stress testing and degradation, for which we investigate the impact of the degradation on the modules light I-V curve parameters, and equivalent solar cell model parameters. Experimental validation of the method on the modules tested shows good agreement between the in-situ estimated power degradation and the flash test measured power loss of the modules, of up to 4.31 % error (RMSE), as the modules experience primarily junction defect recombination and increased series resistance losses. However, the application of the method will be limited for modules experiencing extensive photo-current degradation or delamination, which are not well reflected in the dark I-V characteristic of the PV module.

scholarly journals Industrial Plume Properties Retrieved by Optimal Estimation Using Combined Hyperspectral and Sentinel-2 Data

2021 ◽  
Vol 13 (10) ◽  
pp. 1865
Author(s):  
Gabriel Calassou ◽  
Pierre-Yves Foucher ◽  
Jean-François Léon
Keyword(s):  
Matched Filter ◽  
Estimation Method ◽  
Optimal Estimation ◽  
Model Parameters ◽  
Surface Reflectance ◽  
Sequential Method ◽  
Modal Radius ◽  
Sentinel 2

Stack emissions from the industrial sector are a subject of concern for air quality. However, the characterization of the stack emission plume properties from in situ observations remains a challenging task. This paper focuses on the characterization of the aerosol properties of a steel plant stack plume through the use of hyperspectral (HS) airborne remote sensing imagery. We propose a new method, based on the combination of HS airborne acquisition and surface reflectance imagery derived from the Sentinel-2 Multi-Spectral Instrument (MSI). The proposed method detects the plume footprint and estimates the surface reflectance under the plume, the aerosol optical thickness (AOT), and the modal radius of the plume. Hyperspectral surface reflectances are estimated using the coupled non-negative matrix factorization (CNMF) method combining HS and MSI data. The CNMF reduces the error associated with estimating the surface reflectance below the plume, particularly for heterogeneous classes. The AOT and modal radius are retrieved using an optimal estimation method (OEM), based on the forward model and allowing for uncertainties in the observations and in the model parameters. The a priori state vector is provided by a sequential method using the root mean square error (RMSE) metric, which outperforms the previously used cluster tuned matched filter (CTMF). The OEM degrees of freedom are then analysed, in order to refine the mask plume and to enhance the quality of the retrieval. The retrieved mean radii of aerosol particles in the plume is 0.125 μμm, with an uncertainty of 0.05 μμm. These results are close to the ultra-fine mode (modal radius around 0.1 μμm) observed from in situ measurements within metallurgical plant plumes from previous studies. The retrieved AOT values vary between 0.07 (near the source point) and 0.01, with uncertainties of 0.005 for the darkest surfaces and above 0.010 for the brightest surfaces.

Coupled Thermo-Hydro-Geochemical Models of Engineered Barrier Systems: The Febex Project

2000 ◽  
Vol 663 ◽  
Author(s):  
J. Samper ◽  
R. Juncosa ◽  
V. Navarro ◽  
J. Delgado ◽  
L. Montenegro ◽  
...  
Keyword(s):  
Large Scale ◽  
Reference Model ◽  
Numerical Models ◽  
Full Scale ◽  
Small Scale ◽  
Model Parameters ◽  
In Situ Test ◽  
Wide Range ◽  
Engineered Barrier

ABSTRACTFEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project dealing with the bentonite engineered barrier designed for sealing and containment of waste in a high level radioactive waste repository (HLWR). It includes two main experiments: an situ full-scale test performed at Grimsel (GTS) and a mock-up test operating since February 1997 at CIEMAT facilities in Madrid (Spain) [1,2,3]. One of the objectives of FEBEX is the development and testing of conceptual and numerical models for the thermal, hydrodynamic, and geochemical (THG) processes expected to take place in engineered clay barriers. A significant improvement in coupled THG modeling of the clay barrier has been achieved both in terms of a better understanding of THG processes and more sophisticated THG computer codes. The ability of these models to reproduce the observed THG patterns in a wide range of THG conditions enhances the confidence in their prediction capabilities. Numerical THG models of heating and hydration experiments performed on small-scale lab cells provide excellent results for temperatures, water inflow and final water content in the cells [3]. Calculated concentrations at the end of the experiments reproduce most of the patterns of measured data. In general, the fit of concentrations of dissolved species is better than that of exchanged cations. These models were later used to simulate the evolution of the large-scale experiments (in situ and mock-up). Some thermo-hydrodynamic hypotheses and bentonite parameters were slightly revised during TH calibration of the mock-up test. The results of the reference model reproduce simultaneously the observed water inflows and bentonite temperatures and relative humidities. Although the model is highly sensitive to one-at-a-time variations in model parameters, the possibility of parameter combinations leading to similar fits cannot be precluded. The TH model of the “in situ” test is based on the same bentonite TH parameters and assumptions as for the “mock-up” test. Granite parameters were slightly modified during the calibration process in order to reproduce the observed thermal and hydrodynamic evolution. The reference model captures properly relative humidities and temperatures in the bentonite [3]. It also reproduces the observed spatial distribution of water pressures and temperatures in the granite. Once calibrated the TH aspects of the model, predictions of the THG evolution of both tests were performed. Data from the dismantling of the in situ test, which is planned for the summer of 2001, will provide a unique opportunity to test and validate current THG models of the EBS.

Strong equatorial plasma bubble associated with prominent TEC enhancement observed at mid-latitude ionosphere under the quiescent condition

2021 ◽  
Author(s):  
Fuqing Huang ◽  
Jiuhou Lei ◽  
Chao Xiong
Keyword(s):  
Electron Density ◽  
Electron Content ◽  
Radio Waves ◽  
Plasma Bubble ◽  
Total Electron ◽  
Middle Latitudes ◽  
Multiple Observations ◽  
Equatorial Plasma Bubbles ◽  
Low Latitudes

<p>Equatorial plasma bubbles (EPBs) are typically ionospheric irregularities that frequently occur at the low latitudes and equatorial regions, which can significantly affect the propagation of radio waves. In this study, we reported a unique strong EPB that happened at middle latitudes over the Asian sector during the quiescent period. The multiple observations including total electron content (TEC) from Beidou geostationary satellites and GPS, ionosondes, in-situ electron density from SWARM and meteor radar are used to explore the characteristic and mechanism of the observed EPB. The unique strong EPB was associated with great nighttime TEC/electron density enhancement at the middle latitudes, which moves toward eastward. The potential physical processes of the observed EPB are also discussed.</p>

Sign in / Sign up

Export Citation Format

Share Document