New results of the Land Atmosphere Feedback Experiment (LAFE)

2021 ◽  
Author(s):  
Volker Wulfmeyer ◽  
David D. Turner
Keyword(s):  
Remote Sensing ◽  
Latent Heat ◽  
Land Surface ◽  
Transport Processes ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Model Verification ◽  
Sensing Systems ◽  
Remote Sensing Systems ◽  
The Impact

<p>The Land-Atmosphere Feedback Experiment (LAFE) deployed several state-of-the-art scanning lidar and remote sensing systems to the Atmospheric Radiation Measurement (ARM) Program Southern Great Plains (SPG) site during August 2017. A novel synergy of remote sensing systems was applied for simultaneous measurements of land-surface fluxes and horizontal and vertical transport processes in the atmospheric boundary layer (ABL). The impact of spatial inhomogeneities of the soil-vegetation continuum on L-A feedback was studied using the scanning capability of the instrumentation as well as soil, vegetation, and surface flux measurements. Thus, both the variability of surface fluxes and ABL dynamics and thermodynamics over the SGP site was studied for the first time. The objectives of LAFE are as follows:</p><p>I. Determine turbulence profiles and investigate new relationships among  gradients, variances, and fluxes<br>II. Map surface momentum, sensible heat, and latent heat fluxes using a synergy of scanning wind, humidity, and temperature lidar systems<br>III. Characterize land-atmosphere feedback and the moisture budget at the SGP site via the new LAFE sensor synergy<br>IV: Verify large-eddy simulation model runs and improve turbulence representations in mesoscale models.</p><p>In this presentation, the status of LAFE research and recent achievements of the science objectives are presented and discussed. Concerning I., long-term profiling capabilities of turbulent properties have been developed and will be presented such as continuous measurements of latent heat flux profiles for a duration of one month. Concerning II., we present a combination of tower and remote sensing measurements to study surface layer profiles of wind, temperature, and humidity. A first evaluation of the results demonstrates significant deviations from Monin-Obukhov similarity theory. Concerning III., Convective Triggering Potential (CTP)-Humidity Index (HIlow) metrics are presented at the SGP site to characterize L-A feedback and a new technique for determination of water-vapor advection, as important part of its budget. Last but not least, concerning IV., we present an advanced ensemble model design with turbulence permitting resolution for case studies and model verification from the convection-permitting to the turbulent scales in a realistic mesoscale environment. Using this framework, we introduce a strategy to apply the observations for the test and development of turbulence parameterizations. These results confirm that LAFE will make significant contributions to process understanding and the parameterization of the next generation of high-resolution weather forecast, climate, and earth system models.</p>

scholarly journals Influence of Land Cover and Soil Moisture on the Horizontal Distribution of Sensible and Latent Heat Fluxes in Southeast Kansas during IHOP_2002 and CASES-97

2007 ◽  
Vol 8 (1) ◽  
pp. 68-87 ◽  
Author(s):  
Margaret A. LeMone ◽  
Fei Chen ◽  
Joseph G. Alfieri ◽  
Mukul Tewari ◽  
Bart Geerts ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Latent Heat ◽  
Land Surface ◽  
Field Experiments ◽  
Time Of Day ◽  
Horizontal Distribution ◽  
Heat Fluxes ◽  
Surface Model ◽  
Green Vegetation ◽  
The Impact

Abstract Analyses of daytime fair-weather aircraft and surface-flux tower data from the May–June 2002 International H2O Project (IHOP_2002) and the April–May 1997 Cooperative Atmosphere Surface Exchange Study (CASES-97) are used to document the role of vegetation, soil moisture, and terrain in determining the horizontal variability of latent heat LE and sensible heat H along a 46-km flight track in southeast Kansas. Combining the two field experiments clearly reveals the strong influence of vegetation cover, with H maxima over sparse/dormant vegetation, and H minima over green vegetation; and, to a lesser extent, LE maxima over green vegetation, and LE minima over sparse/dormant vegetation. If the small number of cases is producing the correct trend, other effects of vegetation and the impact of soil moisture emerge through examining the slope ΔxyLE/ΔxyH for the best-fit straight line for plots of time-averaged LE as a function of time-averaged H over the area. Based on the surface energy balance, H + LE = Rnet − Gsfc, where Rnet is the net radiation and Gsfc is the flux into the soil; Rnet − Gsfc ∼ constant over the area implies an approximately −1 slope. Right after rainfall, H and LE vary too little horizontally to define a slope. After sufficient drying to produce enough horizontal variation to define a slope, a steep (∼−2) slope emerges. The slope becomes shallower and better defined with time as H and LE horizontal variability increases. Similarly, the slope becomes more negative with moister soils. In addition, the slope can change with time of day due to phase differences in H and LE. These trends are based on land surface model (LSM) runs and observations collected under nearly clear skies; the vegetation is unstressed for the days examined. LSM runs suggest terrain may also play a role, but observational support is weak.

scholarly journals High resolution land surface fluxes from satellite data (HOLAPS v1.0): evaluation and uncertainty assessment

2015 ◽  
Vol 8 (12) ◽  
pp. 10783-10841
Author(s):  
A. Loew ◽  
J. Peng ◽  
M. Borsche
Keyword(s):  
Surface Energy ◽  
Latent Heat ◽  
Satellite Data ◽  
Land Surface ◽  
Global Solar Radiation ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Radiation ◽  
Water Fluxes ◽  
Essential Components

Abstract. Surface water and energy fluxes are essential components of the Earth system. Surface latent heat fluxes provide major energy input to the atmosphere. Despite the importance of these fluxes, state-of-the-art datasets of surface energy and water fluxes largely differ. The present paper introduces a new framework for the estimation of surface energy and water fluxes at the land surface, which allows for temporally and spatially high resolved flux estimates at the global scale (HOLAPS). The framework maximizes the usage of existing long-term satellite data records and ensures internally consistent estimates of the surface radiation and water fluxes. The manuscript introduces the technical details of the developed framework and provides results of a comprehensive sensitivity and evaluation study. Overall the results indicate very good agreement with in situ observations when compared against 49 FLUXNET stations worldwide. Largest uncertainties of latent heat flux and net radiation were found to result from uncertainties in the global solar radiation flux obtained from satellite data products.

scholarly journals Image data paradox – on the impact of the development of image-based remote sensing on the maps’ content in the Eastern Bloc. The case of Poland

2018 ◽  
Vol 50 (4) ◽  
pp. 211-222
Author(s):  
Beata Konopska ◽  
Mirosław Krukowski
Keyword(s):  
Remote Sensing ◽  
Cold War ◽  
Image Data ◽  
Eastern Bloc ◽  
Geographical Information ◽  
Sensing Systems ◽  
The Earth ◽  
Remote Sensing Systems ◽  
The Cold War ◽  
The Impact

Abstract The authors examine the impact of the development of image-based remote sensing systems on the activities of state administrations in the cartographic production and making of geographical information publicly available in the Eastern Bloc countries. A convergence of cartography, secrecy, and power occurred during the Cold War. Through investigation of facts relevant to the acquisition image data of the Earth surface performed by the USA and the USSR, it aims to examine the key questions of why the logic behind the development of cartography in the Eastern Bloc countries after World War II was distorted. The lack of logic was reflected in the fact that the amount of information actually presented on maps decreased with an increase in the information about the surface of the Earth acquired by the means of remote sensing systems. It was suggested that image data in the member states of the Eastern Bloc, in spite of their restricted use and a drop in the informational value of maps, was the main factor behind the creation, detail, and geometric accuracy of civilian maps. Proving this thesis involved analyzing the correlations between the achievements in the field of remote sensing and the quality of maps developed during the Cold War in the Eastern Bloc states.

How Much Do Different Land Models Matter for Climate Simulation? Part I: Climatology and Variability

2010 ◽  
Vol 23 (11) ◽  
pp. 3120-3134 ◽  
Author(s):  
Jiangfeng Wei ◽  
Paul A. Dirmeyer ◽  
Zhichang Guo ◽  
Li Zhang ◽  
Vasubandhu Misra
Keyword(s):  
Heat Flux ◽  
Surface Temperature ◽  
Latent Heat ◽  
General Circulation ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Maximum Temperature ◽  
Daily Maximum Temperature ◽  
Time Step ◽  
The Impact

Abstract An atmospheric general circulation model (AGCM) is coupled to three different land surface schemes (LSSs), both individually and in combination (i.e., the LSSs receive the same AGCM forcing each time step and the averaged upward surface fluxes are passed back to the AGCM), to study the uncertainty of simulated climatologies and variabilities caused by different LSSs. This tiling of the LSSs is done to study the uncertainty of simulated mean climate and climate variability caused by variations between LSSs. The three LSSs produce significantly different surface fluxes over most of the land, no matter whether they are coupled individually or in combination. Although the three LSSs receive the same atmospheric forcing in the combined experiment, the inter-LSS spread of latent heat flux can be larger or smaller than the individually coupled experiment, depending mostly on the evaporation regime of the schemes in different regions. Differences in precipitation are the main reason for the different latent heat fluxes over semiarid regions, but for sensible heat flux, the atmospheric differences and LSS differences have comparable contributions. The influence of LSS uncertainties on the simulation of surface temperature is strongest in dry seasons, and its influence on daily maximum temperature is stronger than on minimum temperature. Land–atmosphere interaction can dampen the impact of LSS uncertainties on surface temperature in the tropics, but can strengthen their impact in middle to high latitudes. Variations in the persistence of surface heat fluxes exist among the LSSs, which, however, have little impact on the global pattern of precipitation persistence. The results provide guidance to future diagnosis of model uncertainties related to LSSs.

scholarly journals Consistency between hydrological model, large aperture scintillometer and remote sensing based evapotranspiration estimates for a heterogeneous catchment

2012 ◽  
Vol 16 (7) ◽  
pp. 2095-2107 ◽  
Author(s):  
B. Samain ◽  
G. W. H. Simons ◽  
M. P. Voogt ◽  
W. Defloor ◽  
N.-J. Bink ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Energy Balance ◽  
Latent Heat ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Surface Model ◽  
Sensible Heat ◽  
Catchment Scale ◽  
Large Aperture

Abstract. The catchment averaged actual evapotranspiration rate is a hydrologic model variable that is difficult to quantify. Evapotranspiration rates – up till present – cannot be continuously observed at the catchment scale. The objective of this paper is to estimate the evapotranspiration rates (or its energy equivalent, the latent heat fluxes LE) for a heterogeneous catchment of 102.3 km2 in Belgium using three fundamentally different algorithms. One possible manner to observe this variable could be the continuous measurement of sensible heat fluxes (H) across large distances (in the order of kilometers) using a large aperture scintillometer (LAS), and converting these observations into evapotranspiration rates. Latent heat fluxes are obtained through the energy balance equation using a series of sensible heat fluxes measured with a LAS over a distance of 9.5 km in the catchment, and point measurements of net radiation (Rn) and ground heat flux (G) upscaled to catchment average through the use of TOPLATS, a physically based land surface model. The resulting LE-values are then compared to results from the remote sensing based surface energy balance algorithm ETLook and the land surface model. Firstly, the performance of ETLook for the energy balance terms has been assessed at the point scale and at the catchment scale. Secondly, consistency between daily evapotranspiration rates from ETLook, TOPLATS and LAS is shown.

scholarly journals Evaluation of Surface Flux Parameterizations with Long-Term ARM Observations

2013 ◽  
Vol 141 (2) ◽  
pp. 773-797 ◽  
Author(s):  
Gang Liu ◽  
Yangang Liu ◽  
Satoshi Endo
Keyword(s):  
Latent Heat ◽  
Land Surface ◽  
Bowen Ratio ◽  
Surface Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Parameterization Schemes ◽  
Surface Models ◽  
Flux Parameterization

Abstract Surface momentum, sensible heat, and latent heat fluxes are critical for atmospheric processes such as clouds and precipitation, and are parameterized in a variety of models ranging from cloud-resolving models to large-scale weather and climate models. However, direct evaluation of the parameterization schemes for these surface fluxes is rare due to limited observations. This study takes advantage of the long-term observations of surface fluxes collected at the Southern Great Plains site by the Department of Energy Atmospheric Radiation Measurement program to evaluate the six surface flux parameterization schemes commonly used in the Weather Research and Forecasting (WRF) model and three U.S. general circulation models (GCMs). The unprecedented 7-yr-long measurements by the eddy correlation (EC) and energy balance Bowen ratio (EBBR) methods permit statistical evaluation of all six parameterizations under a variety of stability conditions, diurnal cycles, and seasonal variations. The statistical analyses show that the momentum flux parameterization agrees best with the EC observations, followed by latent heat flux, sensible heat flux, and evaporation ratio/Bowen ratio. The overall performance of the parameterizations depends on atmospheric stability, being best under neutral stratification and deteriorating toward both more stable and more unstable conditions. Further diagnostic analysis reveals that in addition to the parameterization schemes themselves, the discrepancies between observed and parameterized sensible and latent heat fluxes may stem from inadequate use of input variables such as surface temperature, moisture availability, and roughness length. The results demonstrate the need for improving the land surface models and measurements of surface properties, which would permit the evaluation of full land surface models.

Modeling and Scaling Coupled Energy, Water, and Carbon Fluxes Based on Remote Sensing: An Application to Canada’s Landmass

2007 ◽  
Vol 8 (2) ◽  
pp. 123-143 ◽  
Author(s):  
Baozhang Chen ◽  
Jing M. Chen ◽  
Gang Mo ◽  
Chiu-Wai Yuen ◽  
Hank Margolis ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Land Surface ◽  
General Circulation ◽  
Carbon Fluxes ◽  
General Circulation Models ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Area Index ◽  
Up Scaling

Abstract Land surface models (LSMs) need to be coupled with atmospheric general circulation models (GCMs) to adequately simulate the exchanges of energy, water, and carbon between the atmosphere and terrestrial surfaces. The heterogeneity of the land surface and its interaction with temporally and spatially varying meteorological conditions result in nonlinear effects on fluxes of energy, water, and carbon, making it challenging to scale these fluxes accurately. The issue of up-scaling remains one of the critical unsolved problems in the parameterization of subgrid-scale fluxes in coupled LSM and GCM models. A new distributed LSM, the Ecosystem–Atmosphere Simulation Scheme (EASS) was developed and coupled with the atmospheric Global Environmental Multiscale model (GEM) to simulate energy, water, and carbon fluxes over Canada’s landmass through the use of remote sensing and ancillary data. Two approaches (lumped case and distributed case) for handling subgrid heterogeneity were used to evaluate the effect of land-cover heterogeneity on regional flux simulations based on remote sensing. Online runs for a week in August 2003 provided an opportunity to investigate model performance and spatial scaling issues. Comparisons of simulated results with available tower observations (five sites) across an east–west transect over Canada’s southern forest regions indicate that the model is reasonably successful in capturing both the spatial and temporal variations in carbon and energy fluxes, although there were still some biases in estimates of latent and sensible heat fluxes between the simulations and the tower observations. Moreover, the latent and sensible heat fluxes were found to be better modeled in the coupled EASS–GEM system than in the uncoupled GEM. There are marked spatial variations in simulated fluxes over Canada’s landmass. These patterns of spatial variation closely follow vegetation-cover types as well as leaf area index, both of which are highly correlated with the underlying soil types, soil moisture conditions, and soil carbon pools. The surface fluxes modeled by the two up-scaling approaches (lumped and distributed cases) differ by 5%–15% on average and by up to 15%–25% in highly heterogeneous regions. This suggests that different ways of treating subgrid land surface heterogeneities could lead to noticeable biases in model output.

scholarly journals Consistency between hydrological model, large aperture scintillometer and remote sensing based evapotranspiration estimates for a heterogeneous catchment

2011 ◽  
Vol 8 (6) ◽  
pp. 10863-10894 ◽  
Author(s):  
B. Samain ◽  
G. W. H. Simons ◽  
M. P. Voogt ◽  
W. Defloor ◽  
N.-J. Bink ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Energy Balance ◽  
Latent Heat ◽  
Land Surface ◽  
Land Surface Model ◽  
Heat Fluxes ◽  
Surface Model ◽  
Sensible Heat ◽  
Catchment Scale ◽  
Daily Time

Abstract. The catchment averaged actual evapotranspiration rate is a hydrologic model variable that is difficult to quantify. Evapotranspiration rates can – up till present – not be continuously observed at the catchment scale. The objective of this paper is to estimate the evapotranspiration rates (or its energy equivalent, the latent heat fluxes LE) for a heterogeneous catchment of 102.3 km2 in Belgium using three fundamentally different algorithms. One possible manner to observe this variable could be the continuous measurement of sensible heat fluxes (H) across large distances (in the order of kilometers) using a Large Aperture Scintillometer (LAS), and inverting these observations into evapotranspiration rates. Latent heat fluxes are obtained through the energy balance equation using a series of sensible heat fluxes (H) measured with a LAS over a distance of 9.5 km in the catchment, and point measurements of net radiation (Rn) and ground heat flux (G) upscaled to catchment average through the use of TOPLATS, a physically based land surface model. The resulting LE-values are then validated by comparing them to results from the remote sensing based surface energy balance algorithm ETLook and the land surface model. Firstly, it is demonstrated that ETLook is able to estimate the energy balance terms for daily time steps at the point scale and at the catchment scale. Secondly, consistency between daily evapotranspiration rates from ETLook, TOPLATS and LAS is shown. As such, ETLook provides the opportunity to estimate continuous series of the energy balance terms of a large area for daily time steps and can thus e.g. be used as a validation tool for LAS-measurements, whereas LAS is able to estimate the latent heat fluxes (evapotranspiration rates) for a large and heterogeneous catchment at an hourly time step which can be used for the forcing or validation of hydrologic models.

Sign in / Sign up

Export Citation Format

Share Document