scholarly journals A critical assessment of the JULES land surface model hydrology for humid tropical environments

2013 ◽  
Vol 17 (3) ◽  
pp. 1113-1132 ◽  
Author(s):  
Z. Zulkafli ◽  
W. Buytaert ◽  
C. Onof ◽  
W. Lavado ◽  
J. L. Guyot
Keyword(s):  
Land Surface ◽  
Climate Models ◽  
Surface Fluxes ◽  
Surface Model ◽  
Surface Boundary ◽  
Hydrological Simulation ◽  
Peruvian Andes ◽  
Spatial And Temporal Scales ◽  
Basin Surface ◽  
Mean Square Errors

Abstract. Global land surface models (LSMs) such as the Joint UK Land Environment Simulator (JULES) are originally developed to provide surface boundary conditions for climate models. They are increasingly used for hydrological simulation, for instance to simulate the impacts of land use changes and other perturbations on the water cycle. This study investigates how well such models represent the major hydrological fluxes at the relevant spatial and temporal scales – an important question for reliable model applications in poorly understood, data-scarce environments. The JULES-LSM is implemented in a 360 000 km2 humid tropical mountain basin of the Peruvian Andes–Amazon at 12-km grid resolution, forced with daily satellite and climate reanalysis data. The simulations are evaluated using conventional discharge-based evaluation methods, and by further comparing the magnitude and internal variability of the basin surface fluxes such as evapotranspiration, throughfall, and surface and subsurface runoff of the model with those observed in similar environments elsewhere. We find reasonably positive model efficiencies and high correlations between the simulated and observed streamflows, but high root-mean-square errors affecting the performance in smaller, upper sub-basins. We attribute this to errors in the water balance and JULES-LSM's inability to model baseflow. We also found a tendency to under-represent the high evapotranspiration rates of the region. We conclude that strategies to improve the representation of tropical systems to be (1) addressing errors in the forcing and (2) incorporating local wetland and regional floodplain in the subsurface representation.

scholarly journals A critical assessment of the JULES land surface model hydrology for humid tropical environments

2012 ◽  
Vol 9 (11) ◽  
pp. 12523-12561
Author(s):  
Z. Zulkafli ◽  
W. Buytaert ◽  
C. Onof ◽  
W. Lavado ◽  
J. L. Guyot
Keyword(s):  
Land Surface ◽  
Climate Models ◽  
Surface Fluxes ◽  
Surface Model ◽  
Surface Boundary ◽  
Hydrological Simulation ◽  
Peruvian Andes ◽  
Spatial And Temporal Scales ◽  
Basin Surface ◽  
Mean Square Errors

Abstract. Global land surface models (LSMs) such as the Joint UK Land Environment Simulator (JULES) are originally developed to provide surface boundary conditions for climate models. They are increasingly used for hydrological simulation, for instance to simulate the impacts of land-use changes and other perturbations on the water cycle. This study investigates how well such models represent the major hydrological fluxes at the relevant spatial and temporal scales – an important question for reliable model applications in poorly understood, data-scarce environments. The JULES-LSM is implemented in a 360 000 km2 humid tropical mountain basin of the Peruvian Andes–Amazon at 12 km grid resolution, forced with daily satellite and climate reanalysis data. The simulations are evaluated using conventional discharge-based evaluation methods, and by further comparing the magnitude and internal variability of the basin surface fluxes such as evapotranspiration, throughfall, and surface and subsurface runoff, of the model with those observed in similar environments elsewhere. We find reasonably positive model efficiencies and high correlations between the simulated and observed streamflows, but high root-mean-square errors affecting the performance in smaller, upper sub-basins. We attribute this to errors in the water balance and JULES-LSM's inability to model baseflow. We also found a tendency to underrepresent the high evapotranspiration rates of the region. We conclude that strategies to improve the representation of tropical systems to be (1) addressing errors in the forcing (2) incorporating local wetland and regional floodplain in the subsurface representation.

scholarly journals Development of a Unified Land Model for Prediction of Surface Hydrology and Land–Atmosphere Interactions

2011 ◽  
Vol 12 (6) ◽  
pp. 1299-1320 ◽  
Author(s):  
Ben Livneh ◽  
Pedro J. Restrepo ◽  
Dennis P. Lettenmaier
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Climate Models ◽  
A Priori ◽  
Model Performance ◽  
Surface Flux ◽  
Surface Fluxes ◽  
Frozen Soil ◽  
Surface Model ◽  
Soil Moisture Accounting

Abstract A unified land model (ULM) is described that combines the surface flux parameterizations in the Noah land surface model (used in most of NOAA’s coupled weather and climate models) with the Sacramento Soil Moisture Accounting model (Sac; used for hydrologic prediction within the National Weather Service). The motivation was to develop a model that has a history of strong hydrologic performance while having the ability to be run in the coupled land–atmosphere environment. ULM takes the vegetation, snow model, frozen soil, and evapotranspiration schemes from Noah and merges them with the soil moisture accounting scheme from Sac. ULM surface fluxes, soil moisture, and streamflow simulations were evaluated through comparisons with observations from the Ameriflux (surface flux), Illinois Climate Network (soil moisture), and Model Parameter Estimation Experiment (MOPEX; streamflow) datasets. Initially, a priori parameters from Sac and Noah were used, which resulted in ULM surface flux simulations that were comparable to those produced by Noah (Sac does not predict surface energy fluxes). ULM with the a priori parameters had streamflow simulation skill that was generally similar to Sac’s, although it was slightly better (worse) for wetter (more arid) basins. ULM model performance using a set of parameters identified via a Monte Carlo search procedure lead to substantial improvements relative to the a priori parameters. A scheme for transfer of parameters from streamflow simulations to nearby flux and soil moisture measurement points was also evaluated; this approach did not yield conclusive improvements relative to the a priori parameters.

ECLand: an ECMWF land surface modelling platform

2021 ◽  
Author(s):  
Gianpaolo Balsamo ◽  
Souhail Boussetta
Keyword(s):  
Land Surface ◽  
Urban Areas ◽  
Land Surface Model ◽  
Open Water ◽  
Surface Fluxes ◽  
Surface Model ◽  
New Developments ◽  
Surface Modelling ◽  
Land Surface Modelling ◽  
New Research

<p>The ECMWF operational land surface model, based on the Carbon-Hydrology Tiled ECMWF Scheme for Surface Exchanges over Land (CHTESSEL) is the baseline for global weather, climate and environmental applications at ECMWF. In order to expedite its progress and benefit from international collaboration, an ECLand platform has been designed to host advanced and modular schemes. ECLand is paving the way toward a land model that could support a wider range of modelling applications, facilitating global kilometer scales testing as envisaged in the Copernicus and Destination Earth programmes. This presentation introduces the CHTESSEL and its recent new developments that aims at hosting new research applications.</p><p>These new improvements touch upon different components of the model: (i) vegetation, (ii) snow, (iii) soil hydrology, (iv) open water/lakes (v) rivers and (vi) urban areas. The developments are evaluated separately with either offline simulations or coupled experiments, depending on their level of operational readiness, illustrating the benchmarking criteria for assessing process fidelity with regards to land surface fluxes and reservoirs involved in water-energy-carbon exchange, and within the Earth system prediction framework, as foreseen to enter upcoming ECMWF operational cycles.</p><p>Reference: Souhail Boussetta, Gianpaolo Balsamo*, Anna Agustì-Panareda, Gabriele Arduini, Anton Beljaars, Emanuel Dutra, Glenn Carver, Margarita Choulga, Ioan Hadade, Cinzia Mazzetti, Joaquìn Munõz-Sabater, Joe McNorton, Christel Prudhomme, Patricia De Rosnay, Irina Sandu, Nils Wedi, Dai Yamazaki, Ervin Zsoter, 2021: ECLand: an ECMWF land surface modelling platform, MDPI Atmosphere, (in prep).</p>

scholarly journals Validation of a new SAFRAN-based gridded precipitation product for Spain and comparisons to Spain02 and ERA-Interim

2017 ◽  
Vol 21 (4) ◽  
pp. 2187-2201 ◽  
Author(s):  
Pere Quintana-Seguí ◽  
Marco Turco ◽  
Sixto Herrera ◽  
Gonzalo Miguez-Macho
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Climate Models ◽  
Hydrological Cycle ◽  
Interpolation Method ◽  
Rain Gauge ◽  
Surface Model ◽  
Low Resolution ◽  
Precipitation Events

Abstract. Offline land surface model (LSM) simulations are useful for studying the continental hydrological cycle. Because of the nonlinearities in the models, the results are very sensitive to the quality of the meteorological forcing; thus, high-quality gridded datasets of screen-level meteorological variables are needed. Precipitation datasets are particularly difficult to produce due to the inherent spatial and temporal heterogeneity of that variable. They do, however, have a large impact on the simulations, and it is thus necessary to carefully evaluate their quality in great detail. This paper reports the quality of two high-resolution precipitation datasets for Spain at the daily time scale: the new SAFRAN-based dataset and Spain02. SAFRAN is a meteorological analysis system that was designed to force LSMs and has recently been extended to the entirety of Spain for a long period of time (1979/1980–2013/2014). Spain02 is a daily precipitation dataset for Spain and was created mainly to validate regional climate models. In addition, ERA-Interim is included in the comparison to show the differences between local high-resolution and global low-resolution products. The study compares the different precipitation analyses with rain gauge data and assesses their temporal and spatial similarities to the observations. The validation of SAFRAN with independent data shows that this is a robust product. SAFRAN and Spain02 have very similar scores, although the latter slightly surpasses the former. The scores are robust with altitude and throughout the year, save perhaps in summer when a diminished skill is observed. As expected, SAFRAN and Spain02 perform better than ERA-Interim, which has difficulty capturing the effects of the relief on precipitation due to its low resolution. However, ERA-Interim reproduces spells remarkably well in contrast to the low skill shown by the high-resolution products. The high-resolution gridded products overestimate the number of precipitation days, which is a problem that affects SAFRAN more than Spain02 and is likely caused by the interpolation method. Both SAFRAN and Spain02 underestimate high precipitation events, but SAFRAN does so more than Spain02. The overestimation of low precipitation events and the underestimation of intense episodes will probably have hydrological consequences once the data are used to force a land surface or hydrological model.

scholarly journals Exploring how groundwater buffers the influence of heatwaves on vegetation function during multi-year droughts

2021 ◽  
Vol 12 (3) ◽  
pp. 919-938
Author(s):  
Mengyuan Mu ◽  
Martin G. De Kauwe ◽  
Anna M. Ukkola ◽  
Andy J. Pitman ◽  
Weidong Guo ◽  
...  
Keyword(s):  
Land Surface ◽  
Forest Canopy ◽  
Climate Models ◽  
Root Zone ◽  
Stomatal Closure ◽  
Capillary Rise ◽  
Vapour Pressure Deficit ◽  
Global Climate Models ◽  
Surface Model ◽  
The Impact

Abstract. The co-occurrence of droughts and heatwaves can have significant impacts on many socioeconomic and environmental systems. Groundwater has the potential to moderate the impact of droughts and heatwaves by moistening the soil and enabling vegetation to maintain higher evaporation, thereby cooling the canopy. We use the Community Atmosphere Biosphere Land Exchange (CABLE) land surface model, coupled to a groundwater scheme, to examine how groundwater influences ecosystems under conditions of co-occurring droughts and heatwaves. We focus specifically on south-east Australia for the period 2000–2019, when two significant droughts and multiple extreme heatwave events occurred. We found groundwater plays an important role in helping vegetation maintain transpiration, particularly in the first 1–2 years of a multi-year drought. Groundwater impedes gravity-driven drainage and moistens the root zone via capillary rise. These mechanisms reduced forest canopy temperatures by up to 5 ∘C during individual heatwaves, particularly where the water table depth is shallow. The role of groundwater diminishes as the drought lengthens beyond 2 years and soil water reserves are depleted. Further, the lack of deep roots or stomatal closure caused by high vapour pressure deficit or high temperatures can reduce the additional transpiration induced by groundwater. The capacity of groundwater to moderate both water and heat stress on ecosystems during simultaneous droughts and heatwaves is not represented in most global climate models, suggesting that model projections may overestimate the risk of these events in the future.

scholarly journals Evaluation of the snow regime in dynamic vegetation land surface models using field measurements

2013 ◽  
Vol 7 (3) ◽  
pp. 2333-2372
Author(s):  
E. Kantzas ◽  
M. Lomas ◽  
S. Quegan ◽  
E. Zakharova
Keyword(s):  
Land Surface ◽  
Field Data ◽  
Climate Models ◽  
Optimization Techniques ◽  
The Arctic ◽  
Surface Model ◽  
Land Surface Models ◽  
Snow Density ◽  
Data Set ◽  
Surface Models

Abstract. An increasing number of studies have demonstrated the significant climatic and ecological changes occurring in the northern latitudes over the past decades. As coupled, earth-system models attempt to describe and simulate the dynamics and complex feedbacks of the Arctic environment, it is important to reduce their uncertainties in short-term predictions by improving the description of both the systems processes and its initial state. This study focuses on snow-related variables and extensively utilizes a historical data set (1966–1996) of field snow measurements acquired across the extend of the Former Soviet Union (FSU) to evaluate a range of simulated snow metrics produced by a variety of land surface models, most of them embedded in IPCC-standard climate models. We reveal model-specific issues in simulating snow dynamics such as magnitude and timings of SWE as well as evolution of snow density. We further employ the field snow measurements alongside novel and model-independent methodologies to extract for the first time (i) a fresh snow density value (57–117 kg m–3) for the region and (ii) mean monthly snowpack sublimation estimates across a grassland-dominated western (November–February) [9.2, 6.1, 9.15, 15.25] mm and forested eastern sub-sector (November–March) [1.53, 1.52, 3.05, 3.80, 12.20] mm; we subsequently use the retrieved values to assess relevant model outputs. The discussion session consists of two parts. The first describes a sensitivity study where field data of snow depth and snow density are forced directly into the surface heat exchange formulation of a land surface model to evaluate how inaccuracies in simulating snow metrics affect important modeled variables and carbon fluxes such as soil temperature, thaw depth and soil carbon decomposition. The second part showcases how the field data can be assimilated with ready-available optimization techniques to pinpoint model issues and improve their performance.

scholarly journals Land–atmosphere interactions in the tropics

2019 ◽  
Author(s):  
Pierre Gentine ◽  
Adam Massmann ◽  
Benjamin R. Lintner ◽  
Sayed Hamed Alemohammad ◽  
Rong Fu ◽  
...  
Keyword(s):  
Land Surface ◽  
Deep Convection ◽  
Lower Troposphere ◽  
Surface Fluxes ◽  
Surface Radiation ◽  
Spatial And Temporal Scales ◽  
Wide Range ◽  
Shallow Clouds ◽  
The Tropics ◽  
The Impact

Abstract. The continental tropics play a leading role in the terrestrial water and carbon cycles. Land–atmosphere interactions are integral in the regulation of surface energy, water and carbon fluxes across multiple spatial and temporal scales over tropical continents. We review here some of the important characteristics of tropical continental climates and how land–atmosphere interactions regulate them. Along with a wide range of climates, the tropics manifest a diverse array of land–atmosphere interactions. Broadly speaking, in tropical rainforests, light and energy are typically more limiting than precipitation and water supply for photosynthesis and evapotranspiration; whereas in savanna and semi-arid regions water is the critical regulator of surface fluxes and land–atmosphere interactions. We discuss the impact of the land surface, how it affects shallow clouds and how these clouds can feedback to the surface by modulating surface radiation. Some results from recent research suggest that shallow clouds may be especially critical to land–atmosphere interactions as these regulate the energy budget and moisture transport to the lower troposphere, which in turn affects deep convection. On the other hand, the impact of land surface conditions on deep convection appear to occur over larger, non-local, scales and might be critically affected by transitional regions between the climatologically dry and wet tropics.

scholarly journals Simulating carbon exchange using a regional atmospheric model coupled to an advanced land-surface model

2008 ◽  
Vol 5 (5) ◽  
pp. 4161-4207 ◽  
Author(s):  
H. W. Ter Maat ◽  
R. W. A. Hutjes
Keyword(s):  
Carbon Dioxide ◽  
Land Surface ◽  
Large Scale ◽  
Regional Scale ◽  
Atmospheric Model ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Surface Model ◽  
Carbon Exchange ◽  
Regional Atmospheric Modelling System

Abstract. A large scale mismatch exists between our understanding and quantification of ecosystem atmosphere exchange of carbon dioxide at local scale and continental scales. This paper will focus on the carbon exchange on the regional scale to address the following question: What are the main controlling factors determining atmospheric carbon dioxide content at a regional scale? We use the Regional Atmospheric Modelling System (RAMS), coupled with a land surface scheme simulating carbon, heat and momentum fluxes (SWAPS-C), and including also sub models for urban and marine fluxes, which in principle include the main controlling mechanisms and capture the relevant dynamics of the system. To validate the model, observations are used which were taken during an intensive observational campaign in the central Netherlands in summer 2002. These included flux-site observations, vertical profiles at tall towers and spatial fluxes of various variables taken by aircraft. The coupled regional model (RAMS-SWAPS-C) generally does a good job in simulating results close to reality. The validation of the model demonstrates that surface fluxes of heat, water and CO2 are reasonably well simulated. The comparison against aircraft data shows that the regional meteorology is captured by the model. Comparing spatially explicit simulated and observed fluxes we conclude that in general simulated latent heat fluxes are underestimated by the model to the observations which exhibit large standard deviation for all flights. Sensitivity experiments demonstrated the relevance of the urban emissions of carbon dioxide for the carbon balance in this particular region. The same test also show the relation between uncertainties in surface fluxes and those in atmospheric concentrations.

scholarly journals Integration of nitrogen dynamics into the Noah-MP land model v1.1 for climate and environmental predictions

2015 ◽  
Vol 8 (5) ◽  
pp. 4113-4153 ◽  
Author(s):  
X. Cai ◽  
Z.-L. Yang ◽  
J. B. Fisher ◽  
X. Zhang ◽  
M. Barlage ◽  
...  
Keyword(s):  
Land Surface ◽  
Climate Models ◽  
Net Primary Productivity ◽  
Assessment Tool ◽  
Land Surface Model ◽  
Coupled Model ◽  
Nitrogen Dynamics ◽  
Surface Model ◽  
Meteorological Model ◽  
Environmental Models

Abstract. Climate and terrestrial biosphere models consider nitrogen an important factor in limiting plant carbon uptake, while operational environmental models view nitrogen as the leading pollutant causing eutrophication in water bodies. The community Noah land surface model with multi-parameterization options (Noah-MP) is unique in that it is the next generation land surface model for the Weather Research and Forecasting meteorological model and for the operational weather/climate models in the National Centers for Environmental Prediction. In this study, we add capability to Noah-MP to simulate nitrogen dynamics by coupling the Fixation and Uptake of Nitrogen (FUN) plant model and the Soil and Water Assessment Tool (SWAT) soil nitrogen dynamics. This incorporates FUN's state-of-the-art concept of carbon cost theory and SWAT's strength in representing the impacts of agricultural management on the nitrogen cycle. Parameterizations for direct root and mycorrhizal-associated nitrogen uptake, leaf retranslocation, and symbiotic biological nitrogen fixation are employed from FUN, while parameterizations for nitrogen mineralization, nitrification, immobilization, volatilization, atmospheric deposition, and leaching are based on SWAT. The coupled model is then evaluated at the Kellogg Biological Station – a Long-term Ecological Research site within the U.S. Corn Belt. Results show that the model performs well in capturing the major nitrogen state/flux variables (e.g., soil nitrate and nitrate leaching). Furthermore, the addition of nitrogen dynamics improves the modeling of the carbon and water cycles (e.g., net primary productivity and evapotranspiration). The model improvement is expected to advance the capability of Noah-MP to simultaneously predict weather and water quality in fully coupled Earth system models.

scholarly journals Calculating the turbulent fluxes in the atmospheric surface layer with neural networks

2018 ◽  
Author(s):  
Lukas Hubert Leufen ◽  
Gerd Schädler
Keyword(s):  
Land Surface ◽  
Field Experiments ◽  
Climate Models ◽  
Similarity Theory ◽  
Turbulent Fluxes ◽  
Global Climate Models ◽  
Surface Model ◽  
Time Step ◽  
One Dimensional ◽  
Stability Functions

Abstract. The turbulent fluxes of momentum, heat and water vapour link the Earth's surface with the atmosphere. The correct modelling of the flux interactions between these two systems with very different time scales is therefore vital for climate (resp. Earth system) models. Conventionally, these fluxes are modelled using Monin–Obukhov similarity theory (MOST) with stability functions derived from a small number of field experiments; this results in a range of formulations of these functions and thus also in the flux calculations; furthermore, the underlying equations are non-linear and have to be solved iteratively at each time step of the model. For these reasons, we tried here a different approach, namely using an artificial neural network (ANN) to calculate the fluxes resp. the scaling quantities u* and θ*, thus avoiding explicit formulas for the stability functions. The network was trained and validated with multi-year datasets from seven grassland, forest and wetland sites worldwide using the Broyden–Fletcher–Goldfarb–Shanno (BFGS) quasi-Newton backpropagation algorithm and six-fold cross validation. Extensive sensitivity tests showed that an ANN with six input variables and one hidden layer gave results comparable to (and in some cases even slightly better than) the standard method. Similar satisfying results were obtained when the ANN routine was implemented in a one-dimensional stand alone land surface model (LSM), opening the way to implementation in three-dimensional climate models. In case of the one-dimensional LSM, no CPU time was saved when using the ANN version, since the small time step of the standard version required only one iteration in most cases. This could be different in models with longer time steps, e.g. global climate models.

Sign in / Sign up

Export Citation Format

Share Document