scholarly journals GEOFENCING-BASED LOCALIZATION FOR 3D DATA ACQUISITION NAVIGATION

2016 ◽  
Vol XLI-B4 ◽  
pp. 319-324
Author(s):  
M. Nakagawa ◽  
T. Kamio ◽  
H. Yasojima ◽  
T. Kobayashi
Keyword(s):  
Data Acquisition ◽  
Indoor Positioning ◽  
Outdoor Environment ◽  
Indoor Environments ◽  
Positioning Systems ◽  
3D Data ◽  
Localization And Mapping ◽  
Sensor Position ◽  
Position Data ◽  
Infrastructure Inspection

Users require navigation for many location-based applications using moving sensors, such as autonomous robot control, mapping route navigation and mobile infrastructure inspection. In indoor environments, indoor positioning systems using GNSSs can provide seamless indoor-outdoor positioning and navigation services. However, instabilities in sensor position data acquisition remain, because the indoor environment is more complex than the outdoor environment. On the other hand, simultaneous localization and mapping processing is better than indoor positioning for measurement accuracy and sensor cost. However, it is not easy to estimate position data from a single viewpoint directly. Based on these technical issues, we focus on geofencing techniques to improve position data acquisition. In this research, we propose a methodology to estimate more stable position or location data using unstable position data based on geofencing in indoor environments. We verify our methodology through experiments in indoor environments.

scholarly journals GEOFENCING-BASED LOCALIZATION FOR 3D DATA ACQUISITION NAVIGATION

2016 ◽  
Vol XLI-B4 ◽  
pp. 319-324
Author(s):  
M. Nakagawa ◽  
T. Kamio ◽  
H. Yasojima ◽  
T. Kobayashi
Keyword(s):  
Data Acquisition ◽  
Indoor Positioning ◽  
Outdoor Environment ◽  
Indoor Environments ◽  
Positioning Systems ◽  
3D Data ◽  
Localization And Mapping ◽  
Sensor Position ◽  
Position Data ◽  
Infrastructure Inspection

Users require navigation for many location-based applications using moving sensors, such as autonomous robot control, mapping route navigation and mobile infrastructure inspection. In indoor environments, indoor positioning systems using GNSSs can provide seamless indoor-outdoor positioning and navigation services. However, instabilities in sensor position data acquisition remain, because the indoor environment is more complex than the outdoor environment. On the other hand, simultaneous localization and mapping processing is better than indoor positioning for measurement accuracy and sensor cost. However, it is not easy to estimate position data from a single viewpoint directly. Based on these technical issues, we focus on geofencing techniques to improve position data acquisition. In this research, we propose a methodology to estimate more stable position or location data using unstable position data based on geofencing in indoor environments. We verify our methodology through experiments in indoor environments.

Robustness in Fingerprinting-Based Indoor Positioning Systems

2018 ◽  
pp. 88-141 ◽  
Author(s):  
Shih-Hau Fang
Keyword(s):  
Principal Component Analysis ◽  
Principal Component ◽  
Signal Strength ◽  
Histogram Equalization ◽  
Indoor Positioning ◽  
Received Signal Strength ◽  
Location Estimation ◽  
Location Based Services ◽  
Indoor Environments ◽  
Positioning Systems

Indoor positioning systems have received increasing attention for supporting location-based services in indoor environments. Received signal strength (RSS), mostly utilized in Wi-Fi fingerprinting systems, is known to be unreliable due to two reasons: orientation mismatch and variations in hardware. This chapter introduces an approach based on histogram equalization to compensate for orientation mismatch in robust Wi-Fi localization. The proposed method involves converting the temporal-spatial radio signal strength into a reference function (i.e., equalizing the histogram). This chapter also introduces an enhanced positioning feature, which is called delta-fused principal strength, to enhance the robustness of Wi-Fi localization against the problem of heterogeneous hardware. This algorithm computes the pairwise delta RSS and then integrates with RSS using principal component analysis. The proposed methods effectively and efficiently improve the robustness of location estimation in the presence of mismatch orientation and hardware variations, respectively.

scholarly journals Indoor Positioning on Disparate Commercial Smartphones Using Wi-Fi Access Points Coverage Area

Sensors ◽  
2019 ◽  
Vol 19 (19) ◽  
pp. 4351 ◽  
Author(s):  
Ashraf ◽  
Hur ◽  
Park
Keyword(s):  
Human Mobility ◽  
Indoor Positioning ◽  
Location Based Services ◽  
Indoor Environments ◽  
Coverage Area ◽  
Positioning Accuracy ◽  
Positioning Systems ◽  
Access Points ◽  
Intersection Area ◽  
The Impact

The applications of location-based services require precise location information of a user both indoors and outdoors. Global positioning system’s reduced accuracy for indoor environments necessitated the initiation of Indoor Positioning Systems (IPSs). However, the development of an IPS which can determine the user’s position with heterogeneous smartphones in the same fashion is a challenging problem. The performance of Wi-Fi fingerprinting-based IPSs is degraded by many factors including shadowing, absorption, and interference caused by obstacles, human mobility, and body loss. Moreover, the use of various smartphones and different orientations of the very same smartphone can limit its positioning accuracy as well. As Wi-Fi fingerprinting is based on Received Signal Strength (RSS) vector, it is prone to dynamic intrinsic limitations of radio propagation, including changes over time, and far away locations having similar RSS vector. This article presents a Wi-Fi fingerprinting approach that exploits Wi-Fi Access Points (APs) coverage area and does not utilize the RSS vector. Using the concepts of APs coverage area uniqueness and coverage area overlap, the proposed approach calculates the user’s current position with the help of APs’ intersection area. The experimental results demonstrate that the device dependency can be mitigated by making the fingerprinting database with the proposed approach. The experiments performed at a public place proves that positioning accuracy can also be increased because the proposed approach performs well in dynamic environments with human mobility. The impact of human body loss is studied as well.

scholarly journals Pencitraan 3D Data Geolistrik Resistivitas dengan Rockworks Berdasarkan Hasil Inversi Res2DInv untuk Mengetahui Persebaran Batuan Konglomerat di Desa Surodadi, Kecamatan Gringsing, Kabupaten Batang

2017 ◽  
Vol 7 (2) ◽  
pp. 111 ◽  
Author(s):  
Taufik Nur Fitrianto ◽  
Supriyadi Supriyadi ◽  
Teguh Maulana Mukromin
Keyword(s):  
Data Acquisition ◽  
3D Imaging ◽  
Research Area ◽  
Electrode Spacing ◽  
Microsoft Excel ◽  
Parallel Lines ◽  
3D Data ◽  
Position Data ◽  
2D Imaging ◽  
Schlumberger Array

<p>Research was conducted to determine distribution of Conglomerate in Surodadi Village, Gringsing, Batang. The data acquisition used Schlumberger array. The length of line is 165 m and 15 m electrode spacing. The data processing used Microsoft Excel and 2D imaging used Res2Dinv. Then 3D imaging used Rockworks from result of Res2DInv inversion. The position data was used on UTM coordinate from position data each of electrode. The data acquisition was done at two parallel lines. In this area was found two types of rocks; tuffaceous sandstone and conglomerate. The conglomerate with resistivity values higher than 180 Wm is distribution on southeast research area at the depth 5 m – 25 m. While the tuffaceous sandstone layers is distribution on northwest research area.</p>

scholarly journals Evolution of Indoor Positioning Technologies: A Survey

2017 ◽  
Vol 2017 ◽  
pp. 1-21 ◽  
Author(s):  
Ramon F. Brena ◽  
Juan Pablo García-Vázquez ◽  
Carlos E. Galván-Tejada ◽  
David Muñoz-Rodriguez ◽  
Cesar Vargas-Rosales ◽  
...  
Keyword(s):  
Classification Scheme ◽  
Communication Technologies ◽  
Indoor Positioning ◽  
Wide Field ◽  
Market Opportunity ◽  
Indoor Environments ◽  
Positioning Systems ◽  
Limited Perspective ◽  
Wide Range ◽  
Key Technologies

Indoor positioning systems (IPS) use sensors and communication technologies to locate objects in indoor environments. IPS are attracting scientific and enterprise interest because there is a big market opportunity for applying these technologies. There are many previous surveys on indoor positioning systems; however, most of them lack a solid classification scheme that would structurally map a wide field such as IPS, or omit several key technologies or have a limited perspective; finally, surveys rapidly become obsolete in an area as dynamic as IPS. The goal of this paper is to provide a technological perspective of indoor positioning systems, comprising a wide range of technologies and approaches. Further, we classify the existing approaches in a structure in order to guide the review and discussion of the different approaches. Finally, we present a comparison of indoor positioning approaches and present the evolution and trends that we foresee.

scholarly journals Indoor Positioning Algorithm Based on Maximum Correntropy Unscented Information Filter

2021 ◽  
Vol 10 (7) ◽  
pp. 441
Author(s):  
Li Ma ◽  
Ning Cao ◽  
Xiaoliang Feng ◽  
Minghe Mao
Keyword(s):  
Information Entropy ◽  
Gaussian Noise ◽  
Indoor Positioning ◽  
Indoor Environments ◽  
State Matrix ◽  
Positioning Systems ◽  
Information Filter ◽  
Non Gaussian ◽  
Positioning Algorithm ◽  
Information Vector

In view of the fact that indoor positioning systems are usually affected by non-Gaussian noise in complex indoor environments, this paper tests the data in the actual scene and analyzes the distribution characteristics of noise, and proposes a new indoor positioning algorithm based on maximum correntropy unscented information filter (MCUIF). The proposed indoor positioning algorithm includes three steps: First, the estimation of the state matrix and the corresponding covariance matrix are predicted through the unscented transformation (UT). Second, the observed information is reconstructed by using a nonlinear regression method on the basis of the maximum correntropy criterion (MCC). Third, the contribution of information vector is gained by non-Gaussian measurement and the predicted information vector is corrected by the contribution of information vector. Finally, the gain of information filtering is got by the information entropy state matrix and the information entropy measurement matrix to calculate the position coordinates of the unknown nodes. This algorithm enhances the robustness of the MCUIF to non-Gaussian noise in complex indoor environments. The results from the indoor positioning experiments show that MCUIF is better than the traditional methods in state estimation and position location of the unknown nodes.

scholarly journals Unsupervised Indoor Positioning System Based on Environmental Signatures

Entropy ◽  
2019 ◽  
Vol 21 (3) ◽  
pp. 327
Author(s):  
Pan Feng ◽  
Danyang Qin ◽  
Min Zhao ◽  
Ruolin Guo ◽  
Teklu Berhane
Keyword(s):  
Dead Reckoning ◽  
Indoor Positioning ◽  
Convergence Time ◽  
Positioning System ◽  
Indoor Environments ◽  
Test Results ◽  
Positioning Errors ◽  
Localization And Mapping ◽  
Indoor Positioning System ◽  
Unconventional Method

Mobile sensors are widely used in indoor positioning in recent years, but most methods require cumbersome calibration for precise positioning results, thus the paper proposes a new unsupervised indoor positioning (UIP) without cumbersome calibration. UIP takes advantage of environment features in indoor environments, as some indoor locations have their signatures. UIP considers these signatures as the landmarks, and combines dead reckoning with them in a simultaneous localization and mapping (SLAM) frame to reduce positioning errors and convergence time. The test results prove that the system can achieve accurate indoor positioning, which highlights its prospect as an unconventional method of indoor positioning.

scholarly journals ISPRS BENCHMARK ON MULTISENSORY INDOOR MAPPING AND POSITIONING

2020 ◽  
Vol V-5-2020 ◽  
pp. 117-123
Author(s):  
C. Wang ◽  
Y. Dai ◽  
N. Elsheimy ◽  
C. Wen ◽  
G. Retscher ◽  
...  
Keyword(s):  
Feature Extraction ◽  
Laser Scanning ◽  
Point Clouds ◽  
Indoor Positioning ◽  
Benchmark Dataset ◽  
Scanning System ◽  
Indoor Environments ◽  
Process Data ◽  
Localization And Mapping ◽  
Common Framework

Abstract. In this paper, we present a publicly available benchmark dataset on multisensorial indoor mapping and positioning (MiMAP), which is sponsored by ISPRS scientific initiatives. The benchmark dataset includes point clouds captured by an indoor mobile laser scanning system in indoor environments of various complexity. The benchmark aims to stimulate and promote research in the following three fields: (1) LiDAR-based Simultaneous Localization and Mapping (SLAM); (2) automated Building Information Model (BIM) feature extraction; and (3) multisensory indoor positioning. The MiMAP project provides a common framework for the evaluation and comparison of LiDAR-based SLAM, BIM feature extraction, and smartphone-based indoor positioning methods. This paper describes the multisensory setup, data acquisition process, data description, challenges, and evaluation metrics included in the MiMAP project.

scholarly journals A Review on Indoor Positioning Technologies and its Principles

2021 ◽  
Vol 9 (VII) ◽  
pp. 494-501
Author(s):  
Pradyumna C
Keyword(s):  
Indoor Localization ◽  
Indoor Positioning ◽  
Line Of Sight ◽  
Indoor Environments ◽  
Daily Lives ◽  
Positioning Systems ◽  
Wide Range ◽  
Outdoor Environments ◽  
Location Detection ◽  
Pass Through

This paper aims to provide the reader with a review of the main technologies present in the literature to solve the indoor localization problem that is indoor positioning without GPS. Location detection has been implemented very successfully in outdoor environments using GPS technology. GPS has had a great impact on our daily lives by supporting a large number of applications. However, in indoor environments, the availability of GPS or equivalent satellite-based positioning systems is limited due to the lack of line of sight and attenuation of the GPS signal when they pass through walls. The goal of this paper is to provide a technical perspective on indoor positioning systems, including a wide range of technologies and methods.

Sign in / Sign up

Export Citation Format

Share Document