scholarly journals POINT CLOUD MODELLING BASED ON THE TUNNEL AXIS AND BLOCK ESTIMATION FOR MONITORING THE BADALING TUNNEL, CHINA

2017 ◽  
Vol XLII-2/W7 ◽  
pp. 301-306 ◽  
Author(s):  
J. Wang ◽  
H. B. Zheng ◽  
H. Huang ◽  
G. W. Ma
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Winter Olympics ◽  
Representative Points ◽  
Value Decomposition ◽  
Cloud Modelling ◽  
Svd Method ◽  
Beijing China

Recent years have witnessed a growing investigation of terrestrial laser scanning (TLS) for monitoring the deformation of tunnels. TLS provides the ability to obtain a more accurate and complete description of the tunnel surfaces, allowing the determination of the mechanism and magnitude of tunnel deformation, because the entire surface of the tunnel is more concretely modelled rather than being represented by a number of points. This paper models and analyses the point clouds from TLS to detect the possible deformation of a newly built tunnel. In the application of monitoring the Badaling Tunnel for the Winter Olympics 2020 in Beijing, China, the proposed method includes the following components: the tunnel axis is automatically estimated based on a 3D quadratic form estimation; all of the point clouds are segmented into axis-based blocks; and representative points, solved by a singular value decomposition (SVD) method, are estimated to describe the tunnel surface and establish the correspondence of data between days. The deformations are detected in the form of the distance discrepancies of representative points and verified by the measurements using total station.

scholarly journals TOWARDS DESCRIBING FULL-SECTION DEFORMATIONS USING TERRESTRIAL LASER SCANNING IN THE BADALING TUNNEL (CHINA)

2020 ◽  
Vol XLII-3/W10 ◽  
pp. 235-243
Author(s):  
J. Wang ◽  
H. B. Zheng ◽  
M. Scaioni
Keyword(s):  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Total Station ◽  
Winter Olympics ◽  
Data Errors ◽  
Reference Framework ◽  
Representative Points ◽  
Beijing China

Abstract. This paper focuses on the analysis of point clouds from terrestrial laser scanning to interpret possible deformations of the new Badaling Tunnel that was built for the Winter Olympics 2022 in the nearby of Beijing, China. A reference framework is established to compare data corresponding to various days with blocks of uniform columns and rows from an estimated tunnel axis. Filling holes and detecting outliers are performed for quasi-planar estimation, and refinement transformation is used to adjust the data errors between different days. Finally, the full-section deformations are detected in the form of distance discrepancies of representative points and are verified against total station measurements.

scholarly journals Development of a Low-Cost System for 3D Orchard Mapping Integrating UGV and LiDAR

Plants ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 2804
Author(s):  
Harold F. Murcia ◽  
Sebastian Tilaguy ◽  
Sofiane Ouazaa
Keyword(s):  
Reference Values ◽  
Point Cloud ◽  
Laser Scanning ◽  
Low Cost ◽  
Point Clouds ◽  
Individual Plant ◽  
Individual Tree ◽  
3D Point Clouds ◽  
Mapping System

Growing evaluation in the early stages of crop development can be critical to eventual yield. Point clouds have been used for this purpose in tasks such as detection, characterization, phenotyping, and prediction on different crops with terrestrial mapping platforms based on laser scanning. 3D model generation requires the use of specialized measurement equipment, which limits access to this technology because of their complex and high cost, both hardware elements and data processing software. An unmanned 3D reconstruction mapping system of orchards or small crops has been developed to support the determination of morphological indices, allowing the individual calculation of the height and radius of the canopy of the trees to monitor plant growth. This paper presents the details on each development stage of a low-cost mapping system which integrates an Unmanned Ground Vehicle UGV and a 2D LiDAR to generate 3D point clouds. The sensing system for the data collection was developed from the design in mechanical, electronic, control, and software layers. The validation test was carried out on a citrus crop section by a comparison of distance and canopy height values obtained from our generated point cloud concerning the reference values obtained with a photogrammetry method. A 3D crop map was generated to provide a graphical view of the density of tree canopies in different sections which led to the determination of individual plant characteristics using a Python-assisted tool. Field evaluation results showed plant individual tree height and crown diameter with a root mean square error of around 30.8 and 45.7 cm between point cloud data and reference values.

scholarly journals EVALUATING VOXEL ENABLED SCALABLE INTERSECTION OF LARGE POINT CLOUDS

2015 ◽  
Vol II-3/W5 ◽  
pp. 25-31 ◽  
Author(s):  
J. Wang ◽  
R. Lindenbergh ◽  
M. Menenti
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Spatial Information ◽  
Computation Time ◽  
Point Clouds ◽  
The Other ◽  
Data Set

Laser scanning has become a well established surveying solution for obtaining 3D geo-spatial information on objects and environment. Nowadays scanners acquire up to millions of points per second which makes point cloud huge. Laser scanning is widely applied from airborne, carborne and stable platforms, resulting in point clouds obtained at different attitudes and with different extents. Working with such different large point clouds makes the determination of their overlapping area necessary but often time consuming. In this paper, a scalable point cloud intersection determination method is presented based on voxels. The method takes two overlapping point clouds as input. It consecutively resamples the input point clouds according to a preset voxel cell size. For all non-empty cells the center of gravity of the points in contains is computed. Consecutively for those centers it is checked if they are in a voxel cell of the other point cloud. The same process is repeated after interchanging the role of the two point clouds. The quality of the results is evaluated by the distance to the pints from the other data set. Also computation time and quality of the results are compared for different voxel cell sizes. The results are demonstrated on determining he intersection between an airborne and carborne laser point clouds and show that the proposed method takes 0.10%, 0.15%, 1.26% and 14.35% of computation time compared the the classic method when using cell sizes of of 10, 8, 5 and 3 meters respectively.

scholarly journals Linear-Based Incremental Co-Registration of MLS and Photogrammetric Point Clouds

2021 ◽  
Vol 13 (11) ◽  
pp. 2195
Author(s):  
Shiming Li ◽  
Xuming Ge ◽  
Shengfu Li ◽  
Bo Xu ◽  
Zhendong Wang
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Registration Method ◽  
Cloud Data ◽  
Linear Feature ◽  
Data Registration ◽  
Source Point ◽  
Urban Remote Sensing ◽  
Single Data

Today, mobile laser scanning and oblique photogrammetry are two standard urban remote sensing acquisition methods, and the cross-source point-cloud data obtained using these methods have significant differences and complementarity. Accurate co-registration can make up for the limitations of a single data source, but many existing registration methods face critical challenges. Therefore, in this paper, we propose a systematic incremental registration method that can successfully register MLS and photogrammetric point clouds in the presence of a large number of missing data, large variations in point density, and scale differences. The robustness of this method is due to its elimination of noise in the extracted linear features and its 2D incremental registration strategy. There are three main contributions of our work: (1) the development of an end-to-end automatic cross-source point-cloud registration method; (2) a way to effectively extract the linear feature and restore the scale; and (3) an incremental registration strategy that simplifies the complex registration process. The experimental results show that this method can successfully achieve cross-source data registration, while other methods have difficulty obtaining satisfactory registration results efficiently. Moreover, this method can be extended to more point-cloud sources.

scholarly journals Revealing Changes in the Stem Form and Volume Allocation in Diverse Boreal Forests Using Two-Date Terrestrial Laser Scanning

Forests ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 835
Author(s):  
Ville Luoma ◽  
Tuomas Yrttimaa ◽  
Ville Kankare ◽  
Ninni Saarinen ◽  
Jiri Pyörälä ◽  
...  
Keyword(s):  
Tree Growth ◽  
Point Cloud ◽  
Laser Scanning ◽  
Terrestrial Laser Scanning ◽  
Point Clouds ◽  
Stem Volume ◽  
Accurate Information ◽  
Stem Form ◽  
Monitoring Period ◽  
Significant Difference

Tree growth is a multidimensional process that is affected by several factors. There is a continuous demand for improved information on tree growth and the ecological traits controlling it. This study aims at providing new approaches to improve ecological understanding of tree growth by the means of terrestrial laser scanning (TLS). Changes in tree stem form and stem volume allocation were investigated during a five-year monitoring period. In total, a selection of attributes from 736 trees from 37 sample plots representing different forest structures were extracted from taper curves derived from two-date TLS point clouds. The results of this study showed the capability of point cloud-based methods in detecting changes in the stem form and volume allocation. In addition, the results showed a significant difference between different forest structures in how relative stem volume and logwood volume increased during the monitoring period. Along with contributing to providing more accurate information for monitoring purposes in general, the findings of this study showed the ability and many possibilities of point cloud-based method to characterize changes in living organisms in particular, which further promote the feasibility of using point clouds as an observation method also in ecological studies.

scholarly journals Comparing High Accuracy t-LiDAR and UAV-SfM Derived Point Clouds for Geomorphological Change Detection

2021 ◽  
Vol 10 (6) ◽  
pp. 367
Author(s):  
Simoni Alexiou ◽  
Georgios Deligiannakis ◽  
Aggelos Pallikarakis ◽  
Ioannis Papanikolaou ◽  
Emmanouil Psomiadis ◽  
...  
Keyword(s):  
Soil Erosion ◽  
Change Detection ◽  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Mean Value ◽  
Detection Methods ◽  
Mountainous Catchments ◽  
Aerial Vehicle ◽  
Soil Erosion Assessment

Analysis of two small semi-mountainous catchments in central Evia island, Greece, highlights the advantages of Unmanned Aerial Vehicle (UAV) and Terrestrial Laser Scanning (TLS) based change detection methods. We use point clouds derived by both methods in two sites (S1 & S2), to analyse the effects of a recent wildfire on soil erosion. Results indicate that topsoil’s movements in the order of a few centimetres, occurring within a few months, can be estimated. Erosion at S2 is precisely delineated by both methods, yielding a mean value of 1.5 cm within four months. At S1, UAV-derived point clouds’ comparison quantifies annual soil erosion more accurately, showing a maximum annual erosion rate of 48 cm. UAV-derived point clouds appear to be more accurate for channel erosion display and measurement, while the slope wash is more precisely estimated using TLS. Analysis of Point Cloud time series is a reliable and fast process for soil erosion assessment, especially in rapidly changing environments with difficult access for direct measurement methods. This study will contribute to proper georesource management by defining the best-suited methodology for soil erosion assessment after a wildfire in Mediterranean environments.

scholarly journals Regional Modeling of Forest Fuels and Structural Attributes Using Airborne Laser Scanning Data in Oregon

2021 ◽  
Vol 13 (2) ◽  
pp. 261
Author(s):  
Francisco Mauro ◽  
Andrew T. Hudak ◽  
Patrick A. Fekety ◽  
Bryce Frank ◽  
Hailemariam Temesgen ◽  
...  
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Field Measurements ◽  
Point Clouds ◽  
Semiparametric Models ◽  
Airborne Laser Scanning ◽  
Parametric Models ◽  
Fuel Load ◽  
Forest Fuels ◽  
Airborne Laser

Airborne laser scanning (ALS) acquisitions provide piecemeal coverage across the western US, as collections are organized by local managers of individual project areas. In this study, we analyze different factors that can contribute to developing a regional strategy to use information from completed ALS data acquisitions and develop maps of multiple forest attributes in new ALS project areas in a rapid manner. This study is located in Oregon, USA, and analyzes six forest structural attributes for differences between: (1) synthetic (i.e., not-calibrated), and calibrated predictions, (2) parametric linear and semiparametric models, and (3) models developed with predictors computed for point clouds enclosed in the areas where field measurements were taken, i.e., “point-cloud predictors”, and models developed using predictors extracted from pre-rasterized layers, i.e., “rasterized predictors”. Forest structural attributes under consideration are aboveground biomass, downed woody biomass, canopy bulk density, canopy height, canopy base height, and canopy fuel load. Results from our study indicate that semiparametric models perform better than parametric models if no calibration is performed. However, the effect of the calibration is substantial in reducing the bias of parametric models but minimal for the semiparametric models and, once calibrations are performed, differences between parametric and semiparametric models become negligible for all responses. In addition, minimal differences between models using point-cloud predictors and models using rasterized predictors were found. We conclude that the approach that applies semiparametric models and rasterized predictors, which represents the easiest workflow and leads to the most rapid results, is justified with little loss in accuracy or precision even if no calibration is performed.

Application of close range photogrammetry in structural health monitoring by processing generated point cloud datasets

2021 ◽  
Author(s):  
Ali Mirzazade ◽  
Cosmin Popescu ◽  
Thomas Blanksvärd ◽  
Björn Täljsten
Keyword(s):  
Health Monitoring ◽  
Point Cloud ◽  
Laser Scanning ◽  
Point Clouds ◽  
Optical Data ◽  
Small Scale ◽  
Relevant Parameter ◽  
Bridge Inspection ◽  
Close Range Photogrammetry ◽  
Close Range

<p>In bridge inspection, vertical displacement is a relevant parameter for both short and long-term health monitoring. Assessing change in deflections could also simplify the assessment work for inspectors. Recent developments in digital camera technology and photogrammetry software enables point cloud with colour information (RGB values) to be generated. Thus, close range photogrammetry offers the potential of monitoring big and small-scale damages by point clouds. The current paper aims to monitor geometrical deviations in Pahtajokk Bridge, Northern Sweden, using an optical data acquisition technique. The bridge in this study is scanned two times by almost one year a part. After point cloud generation the datasets were compared to detect geometrical deviations. First scanning was carried out by both close range photogrammetry (CRP) and terrestrial laser scanning (TLS), while second scanning was performed by CRP only. Analyzing the results has shown the potential of CRP in bridge inspection.</p>

scholarly journals ON A KNOWLEDGE-BASED APPROACH TO THE CLASSIFICATION OF MOBILE LASER SCANNING POINT CLOUDS

2018 ◽  
Vol XLII-4 ◽  
pp. 343-349 ◽  
Author(s):  
M. Lemmens
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Decision Rules ◽  
Point Clouds ◽  
Bench Mark ◽  
Automated Classification ◽  
Initial Experiment ◽  
Data Set ◽  
Knowledge Based

<p><strong>Abstract.</strong> A knowledge-based system exploits the knowledge, which a human expert uses for completing a complex task, through a database containing decision rules, and an inference engine. Already in the early nineties knowledge-based systems have been proposed for automated image classification. Lack of success faded out initial interest and enthusiasm, the same fate neural networks struck at that time. Today the latter enjoy a steady revival. This paper aims at demonstrating that a knowledge-based approach to automated classification of mobile laser scanning point clouds has promising prospects. An initial experiment exploiting only two features, height and reflectance value, resulted in an overall accuracy of 79<span class="thinspace"></span>% for the Paris-rue-Madame point cloud bench mark data set.</p>

scholarly journals EXPLORING ALS AND DIM DATA FOR SEMANTIC SEGMENTATION USING CNNS

2018 ◽  
Vol XLII-1 ◽  
pp. 347-354 ◽  
Author(s):  
F. Politz ◽  
M. Sester
Keyword(s):  
Point Cloud ◽  
Laser Scanning ◽  
Semantic Segmentation ◽  
Point Clouds ◽  
Good Alternative ◽  
Aerial Images ◽  
Learning Approaches ◽  
Advantages And Disadvantages ◽  
Sensing Applications ◽  
High Level

<p><strong>Abstract.</strong> Over the past years, the algorithms for dense image matching (DIM) to obtain point clouds from aerial images improved significantly. Consequently, DIM point clouds are now a good alternative to the established Airborne Laser Scanning (ALS) point clouds for remote sensing applications. In order to derive high-level applications such as digital terrain models or city models, each point within a point cloud must be assigned a class label. Usually, ALS and DIM are labelled with different classifiers due to their varying characteristics. In this work, we explore both point cloud types in a fully convolutional encoder-decoder network, which learns to classify ALS as well as DIM point clouds. As input, we project the point clouds onto a 2D image raster plane and calculate the minimal, average and maximal height values for each raster cell. The network then differentiates between the classes ground, non-ground, building and no data. We test our network in six training setups using only one point cloud type, both point clouds as well as several transfer-learning approaches. We quantitatively and qualitatively compare all results and discuss the advantages and disadvantages of all setups. The best network achieves an overall accuracy of 96<span class="thinspace"></span>% in an ALS and 83<span class="thinspace"></span>% in a DIM test set.</p>

Sign in / Sign up

Export Citation Format

Share Document