scholarly journals The influence of water jet diameter and bone structural properties on the efficiency of pure water jet drilling in porcine bone

2014 ◽  
Vol 5 (2) ◽  
pp. 53-58 ◽  
Author(s):  
S. den Dunnen ◽  
G. J. M. Tuijthof

Abstract. Using water jets in orthopedic surgery to drill holes in bones can be beneficial due to the absence of thermal damage and the always sharp cut. To minimize operating time and the volume of water that is used, the efficiency (volume of removed bone per added volume of water) of the water jet should be maximized. The goal was to study the effect of the open trabecular bone structure on the efficiency for different water jet diameters. 86 holes were drilled in porcine tali and femora submerged in water with nozzles of 0.3, 0.4, 0.5 and 0.6 mm at 70 MPa during 5 s and a standoff distance of 8 mm. MicroCT scans were made to measure the removed bone volume and the bone structural properties Trabecular Spacing (Tb.Sp.), Trabecular Thickness (Tb.Sp.) and Bone Volume Fraction (BV/TV). Pearson's correlation tests (p < 0.05, 95% confidence interval) were performed for each water jet diameter using the bone structural property as an independent factor and the efficiency as a dependent factor. No significant differences were found between the nozzle diameters in the material removal rates per added volume of water. The efficiency decreased for an increase in Tb.Th. and BV/TV for nozzles of 0.3, 0.4 and 0.5 mm. The 0.6 mm nozzle showed less influence of the Tb.Th. and BV/TV. The Tb.Sp. has no influence on the efficiency of a water jet. The total volume of added water combined with the Tb.Th. or BV/TV is a leading measure for the volume of bone material that is removed, which provides freedom in the development of water jet instruments as the nozzle diameter, pressure and jet time can be chosen in accordance to the maximum operating time requirements or dimensional limitations of a design.

2021 ◽  
Author(s):  
Ursula Föger-Samwald ◽  
Maria Papageorgiou ◽  
Katharina Wahl-Figlash ◽  
Katharina Kerschan-Schindl ◽  
Peter Pietschmann

AbstractMuscle force is thought to be one of the main determinants of bone development. Hence, peak muscle growth is expected to precede peak bone growth. In this study, we investigated muscle and bone development in female C57BL/6 J, DBA/2JRj, and C3H/HeOuJ mice. Femoral cortical and trabecular bone structure and the weights of selected muscles were assessed at the ages of 8, 16, and 24 weeks. Muscle mass increased from 8 to 24 weeks in all 3 strains, suggesting peak muscle development at 24 weeks or later. Bone volume fraction, trabecular number, and connectivity density of the femur decreased or remained unchanged, whereas trabecular density and trabecular thickness largely increased. These results suggest a peak in trabecular bone accrual at 8 weeks or earlier followed by further increases in density and structural reorganization of trabeculae. Cortical density, cortical thickness, and cortical cross sectional area increased over time, suggesting a peak in cortical bone accrual at 24 weeks or later. In conclusion, our data provide evidence that growth of muscle lags behind trabecular bone accrual.


2010 ◽  
Vol 2010 ◽  
pp. 1-6
Author(s):  
Zelieann R. Craig ◽  
Samuel L. Marion ◽  
Janet L. Funk ◽  
Mary L. Bouxsein ◽  
Patricia B. Hoyer

Previous work showed that retaining residual ovarian tissue protects young mice from accelerated bone loss following ovarian failure. The present study was designed to determine whether this protection is also present in aged animals. Aged (9–12 months) C57BL/6Hsd female mice were divided into: CON (vehicle), VCD (160 mg/kg; 15d), or OVX (ovariectomized). Lumbar BMD was monitored by DXA andμCT used to assess vertebral microarchitecture. BMD was not different between VCD and CON at any time point but was lower (P<.05) than baseline, starting 1 month after ovarian failure in VCD and OVX mice. FollowingμCT analysis there were no differences between CON and VCD, but OVX mice had lower bone volume fraction, trabecular thickness, and a trend for decreased connectivity density. These findings provide evidence that retention of residual ovarian tissue may protect aged follicle-depleted mice from accelerated bone loss to a lesser extent than that observed in young mice.


2019 ◽  
Vol 30 (3) ◽  
pp. 232-237
Author(s):  
Mayra Cristina Yamasaki ◽  
Rocharles CavalcanteFontenele ◽  
Yuri Nejaim ◽  
Deborah Queiroz Freitas

Abstract The purpose of this study was to test the radioprotective effect of selenium in the bone microarchitecture of irradiated rats mandibles. Forty rats were separated into 4 groups with 10 animals: control group (CG), irradiated group (IG), sodium selenite group (SSG) and sodium selenite irradiated group (SSIG). A single dose of 0.8 mg/kg sodium selenite was administered intraperitoneally in the SSG and SSIG groups. One hour later, animals of IG and SSIG groups were irradiated with 15 Gy of x-rays. Forty days after radiation a bilateral extraction of the mandibular first molars was performed. After the extraction procedure, five rats were killed after fifteen days and others five after thirty days. Micro- computed tomography was used to evaluate cortical and trabecular bone of each rat. The mean and standard deviation of each bone microarchitecture parameter were analyzed using the statistical test of two-way Analysis of Variance (ANOVA). At 15 days, the bone volume presented higher values in the CG and SSG groups (p=0.001). The same groups presented statistically significant higher values when bone volume fraction (p<0.001) and trabecular thickness (p<0.001) were analyzed. At 30 days, it was observed that in relation to the bone volume fraction, SSG group presented the highest value while SSIG group had the lowest value, with statistically significant difference (p=0.016). Sodium selenite demonstrated a median radioprotective effect in the bone microarchitecture of irradiated mandibles, which indicates the substance may be a potential radioprotective agent against chronic effects of high doses of ionizing radiation.


2012 ◽  
Vol 83 (3) ◽  
pp. 402-409 ◽  
Author(s):  
Nan Ru ◽  
Sean Shih-Yao Liu ◽  
Li Zhuang ◽  
Song Li ◽  
Yuxing Bai

ABSTRACT Objective: To observe the real-time microarchitecture changes of the alveolar bone and root resorption during orthodontic treatment. Materials and Methods: A 10 g force was delivered to move the maxillary left first molars mesially in twenty 10-week-old rats for 14 days. The first molar and adjacent alveolar bone were scanned using in vivo microcomputed tomography at the following time points: days 0, 3, 7, and 14. Microarchitecture parameters, including bone volume fraction, structure model index, trabecular thickness, trabecular number, and trabecular separation of alveolar bone, were measured on the compression and tension side. The total root volume was measured, and the resorption crater volume at each time point was calculated. Univariate repeated measures analysis of variance with Bonferroni corrections were performed to compare the differences in each parameter between time points with significance level at P &lt; .05. Results: From day 3 to day 7, bone volume fraction, structure model index, trabecular thickness, and trabecular separation decreased significantly on the compression side, but the same parameters increased significantly on the tension side from day 7 to day 14. Root resorption volume of the mesial root increased significantly on day 7 of orthodontic loading. Conclusions: Real-time root and bone resorption during orthodontic movement can be observed in 3 dimensions using in vivo micro-CT. Alveolar bone resorption and root resorption were observed mostly in the apical third on day 7 on the compression side; bone formation was observed on day 14 on the tension side during orthodontic tooth movement.


2014 ◽  
Vol 6;17 (6;12) ◽  
pp. E737-E745
Author(s):  
Kyung-Hoon Kim

Background: Polymethyl methacrylate (PMMA) bone cement is widely used for osteoplasty. However, previous studies have demonstrated the adverse effects of PMMA due to its excessive stiffness and heat production. Recently, calcium phosphate cement (CPC) that overcomes those negative effects has been successfully applied in osteoplasty. The potential problem of CPC is markedly less initial stiffness. It leads to progressive, repeated collapse in the treated vertebra before CPC has been replaced by new bone that would provide substantial improvement in compressive strength and stiffness. The activated platelets in platelet-rich plasma (PRP) release a high concentration of growth factors which play an important role in bone healing. Objective: To investigate whether PRP could accelerate the osteoconduction of CPC and enhance the bone strength of the treated vertebra in an animal model. Study Design: Controlled animal study. Setting: Laboratory animal study, Methods: Thirty-two female Sprague-Dawley rats were ovariectomized at 8 weeks of age. After 3 months, they were randomly divided into 4 groups and received cement augmentation in the fifth caudal spine with different filler materials; sham-operated rats (S), PMMA (P), CPC (C), and CPC + PRP (CP). Bone mineral density (BMD) and trabecular type-associated morphological parameters, including trabecular bone volume fraction and trabecular thickness in the augmented caudal spine, were evaluated by micro-computed tomography (mirco-CT) 2 weeks after the cementoplasty. Histological analysis was also performed to compare the bone regeneration. Results: The trabecular bone volume fraction in the CP group was significantly greater than those of all the other groups. Trabecular thickness was higher in the CP group than the S and P groups. This augmented trabecular structure in the CP group accordingly showed higher BMD. Histological evaluations showed significantly more bone regeneration in the CP group. Limitations: There has been a concern that the effect of PRP would be dependent on the species, and might show different results in humans. Baseline values of micro-CT analysis were not measured, which could have provided exact evidence of the changes in trabecular microarchitecture parameters and cement resorption profiles. Finally, caudal vertebrae with filler materials used in biological study should have been compared by their mechanical properties using biomechanical evaluations for a more coherent study, which was not possible due to technical problems. Conclusions: Incorporating PRP into CPC could accelerate osteoconduction in the augmented vertebra leading to improvement of trabecular bone microarchitecture and BMD in rats. Key words: Bone mineral density, calcium phosphates, cementoplasty, histology, osteoconduction, osteoporosis, platelet-rich plasma, polymethyl methacrylate, vertebra


1999 ◽  
Vol 121 (3) ◽  
pp. 348-355 ◽  
Author(s):  
M. Richards ◽  
N. A. Waanders ◽  
J. A. Weiss ◽  
V. Bhatia ◽  
L. E. Senunas ◽  
...  

A bilateral New Zealand white rabbit model of distraction osteogenesis (DO) was used to investigate the relationship between strain environment and bone regeneration during limb lengthening. In seven (n = 7) rabbits, a stiffener was applied to the fixator on one side to reduce strains within the gap tissue after lengthening was completed. Animals were euthanized six days later and their distraction zones were harvested and analyzed for changes in new bone volume and architecture. Nonlinear finite element analyses (FEA) were performed to predict changes in the gap strain environment. FEA results predicted a nearly uniform sevenfold decrease in average strain measures within the distraction zone. No change in total average new bone volume and significant decreases in both bone volume fraction (BV/TV) and trabecular thickness (Tb.Th) were observed in tibiae in which gap strains were reduced experimentally, compared to contralateral controls. These results suggest that fixator stiffening influenced the architecture but not the amount of newly formed bone. This animal model of distraction might be used to study the mechanisms by which strain fields affect events in bone repair and regeneration, such as cell proliferation, precursor tissue differentiation, and altered growth factor and nutrient delivery to tissues.


2019 ◽  
Vol 53 (4) ◽  
pp. 264-271
Author(s):  
Theerasak Nakornnoi ◽  
Chidchanok Leethanakul ◽  
Bancha Samruajbenjakun

Objective: To investigate the effects of leukocyte-platelet-rich plasma (L-PRP) on the alveolar bone changes at the compression and tension sides during orthodontic tooth movement. Materials and Methods: Around 20 New Zealand white rabbits were used in a split-mouth design. The maxillary first premolar was moved mesially with a nickel-titanium closed-coil spring. One side of the maxilla was randomly injected with L-PRP, while the contralateral side served as the control which received normal saline. The alveolar bone adjacent to the maxillary first premolar was scanned using microcomputed tomography at days 0, 7, 14, and 28. Microstructural parameters including bone volume fraction, trabecular thickness, and trabecular separation of alveolar bone were assessed on the compression and tension sides of the maxillary first premolar. Results: Compared between the groups, the L-PPR group showed a significantly decreased bone volume fraction on the compression side on days 7 and 14 but significantly increased bone volume fraction on the tension side on day 14. However, there were no statistically significant differences in the parameters of trabecular thickness and trabecular separation. Conclusion: Local administration of L-PRP may promote bone resorption on the compression side and bone formation on the tension side at the initial stage of orthodontic tooth movement.


Sign in / Sign up

Export Citation Format

Share Document