scholarly journals Influence of tectonic folding on rockfall susceptibility, American Fork Canyon, Utah, USA

2007 ◽  
Vol 7 (1) ◽  
pp. 1-14 ◽  
Author(s):  
J. A. Coe ◽  
E. L. Harp
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Production Data ◽  
Thrust Belt ◽  
Geologic Mapping ◽  
North Central ◽  
Rock Mass Quality ◽  
Fold Hinge ◽  
Quality Measurements

Abstract. We examine rockfall susceptibility of folded strata in the Sevier fold-thrust belt exposed in American Fork Canyon in north-central Utah. Large-scale geologic mapping, talus production data, rock-mass-quality measurements, and historical rockfall data indicate that rockfall susceptibility is correlated with limb dip and curvature of the folded, cliff-forming Mississippian limestones. On fold limbs, rockfall susceptibility increases as dip increases. This relation is controlled by several factors, including an increase in adverse dip conditions and apertures of discontinuities, and shearing by flexural slip during folding that has reduced the friction angles of discontinuities by smoothing surface asperities. Susceptibility is greater in fold hinge zones than on adjacent limbs primarily because there are greater numbers of discontinuities in hinge zones. We speculate that susceptibility increases in hinge zones as fold curvature becomes tighter.

ethodical principles of designing the formation of rock mass quality for lump sorting scheelite-containing ores at the stage of mining

2019 ◽  
Vol 8 (29) ◽  
pp. 3-17
Author(s):  
V.A. Khakulov ◽  
◽  
V.A. Shapovalov ◽  
V.N. Ignatov ◽  
Zh.V. Karpova ◽  
...  
Keyword(s):  
Rock Mass ◽  
Rock Mass Quality

In Situ Tests on Creep Behavior of Rock Mass with Joint or Shearing Zone in Foundation of Large-Scale Hydroelectric Projects

2004 ◽  
Vol 261-263 ◽  
pp. 1097-1102 ◽  
Author(s):  
Jian Liu ◽  
Xia Ting Feng ◽  
Xiu Li Ding ◽  
Huo Ming Zhou
Keyword(s):  
Rock Mass ◽  
Creep Behavior ◽  
Large Scale ◽  
Time Dependent ◽  
Three Gorges Project ◽  
Three Gorges ◽  
The Three Gorges ◽  
The Three Gorges Project

The time-dependent behavior of rock mass, which is generally governed by joints and shearing zones, is of great significance for engineering design and prediction of long-term deformation and stability. In situ creep test is a more effective method than laboratory test in characterizing the creep behavior of rock mass with joint or shearing zone due to the complexity of field conditions. A series of in situ creep tests on granite with joint at the shiplock area of the Three-Gorges Project and basalt with shearing zone at the right abutment of the Xiluodu Project were performed in this study. Based on the test results, the stress-displacement-time responses of the joints and basalt are analyzed, and their time-dependent constitutive model and model coefficients are given, which is crucial for the design to prevent the creep deformations of rock masses from causing the failure of the operation of the shiplock gate at the Three-Gorges Project and long-term stability of the Xiluodu arc dam.

scholarly journals Weightage Effect during Back-Calculation of Rock-Mass Quality from the Installed Tunnel Support in Rock-Mass Rating and Tunneling Quality Index System

2019 ◽  
Vol 9 (10) ◽  
pp. 2065 ◽  
Author(s):  
Jonguk Kim ◽  
Hafeezur Rehman ◽  
Wahid Ali ◽  
Abdul Muntaqim Naji ◽  
Hankyu Yoo
Keyword(s):  
Rock Mass ◽  
Quality Index ◽  
Rock Bolt ◽  
Rock Mass Rating ◽  
Rock Mass Quality ◽  
Back Calculation ◽  
The Difference ◽  
Bolt Spacing ◽  
Q System ◽  
Selection Of

In extensively used empirical rock-mass classification systems, the rock-mass rating (RMR) and tunneling quality index (Q) system, rock-mass quality, and tunnel span are used for the selection of rock bolt length and spacing and shotcrete thickness. In both systems, the rock bolt spacing and shotcrete thickness selection are based on the same principle, which is used for the back-calculation of the rock-mass quality. For back-calculation, there is no criterion for the selection of rock-bolt-spacing-based rock-mass quality weightage and shotcrete thickness along with tunnel-span-based rock-mass quality weightage. To determine this weightage effect during the back-calculation, five weightage cases are selected, explained through example, and applied using published data. In the RMR system, the weightage effect is expressed in terms of the difference between the calculated and back-calculated rock-mass quality in the two versions of RMR. In the Q system, the weightage effect is presented in plots of stress reduction factor versus relative block size. The results show that the weightage effect during back-calculation not only depends on the difference in rock-bolt-spacing-based rock-mass quality and shotcrete along with tunnel-span-based rock-mass quality, but also on their corresponding values.

Study on Deformation and Damage of Rock Mass Subject to High In Situ Stress by Using a Elastoplastic Damage Model and Considering the Impact of Weak Planes

2013 ◽  
Vol 838-841 ◽  
pp. 705-709
Author(s):  
Yun Hao Yang ◽  
Ren Kun Wang
Keyword(s):  
Rock Mass ◽  
Large Scale ◽  
Damage Model ◽  
Back Analysis ◽  
In Situ Stress ◽  
Surrounding Rock ◽  
High In Situ Stress ◽  
Underground Caverns ◽  
The Impact

Large scale underground caverns are under construction in high in-situ stress field at Houziyan hydropower station. To investigate deformation and damage of surrounding rock mass, a elastoplastic orthotropic damage model capable of describing induced orthotropic damage and post-peak behavior of hard rock is used, together with a effective approach accounting for the presence of weak planes. Then a displacement based back analysis was conducted by using the measured deformation data from extensometers. The computed displacements are in good agreement with the measured ones at most of measurement points, which confirm the validities of constitutive model and numerical simulation model. The result of simulation shows that damage of surrounding rock mass is mainly dominated by the high in-situ stress rather than the weak planes and heavy damage occur at the cavern shoulders and side walls.

scholarly journals Joint Investigation and 3D Visual Evaluation of Rock Mass Quality

2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Haiping Yuan ◽  
Chenghao Chen ◽  
Yixian Wang ◽  
Hanbing Bian ◽  
Yan Liu
Keyword(s):  
Rock Mass ◽  
Quality Evaluation ◽  
Evaluation Method ◽  
Three Dimensional ◽  
Rock Mass Classification ◽  
National Standard ◽  
Ratio Method ◽  
Rock Mass Quality ◽  
Close Range ◽  
Mass Classification

In order to realize the high efficiency quality classification and three-dimensional visualization of engineering rock mass and to solve the technical difficulties of the traditional rock mass quality evaluation method such as high labor intensity, long process time consumption, many intervention processes such as scale measurement and manual calculation, and nonintuitive classification results, this paper puts forward a 3D visual rock mass quality evaluation method and system based on close-range photography, which optimizes the traditional rock mass quality evaluation method, makes the rock mass classification three-dimensional and visible, and realizes the estimation of unrevealed rock mass quality evaluation index. The research results show the following: (1) The method of storing joint information by close-range photography and extracting joint information by human-computer interaction improves the working efficiency and the process is safe and controllable compared with the traditional method of collecting fracture parameters. (2) Based on the statistical analysis of 97 groups of roadway survey data, the comprehensive statistical regression formula between BQ value of Chinese national standard and RMR value is given, and there is a good correlation between BQ value and RMR value of rock mass quality index. (3) Based on the power-inverse ratio method, the three-dimensional model of rock mass classification of the mine was established, and the cutting model obtained the current distribution diagram of rock mass quality grade, providing scientific reference for drilling, blasting, support, and other production design optimizations.

scholarly journals FoodSQRBlock: Digitizing food production & supply chain with blockchain & QR code in the cloud

2021 ◽  
Author(s):  
Somdip Dey ◽  
Suman Saha ◽  
Amit Singh ◽  
Klaus D. Mcdonald-Maier
Keyword(s):  
Supply Chain ◽  
Food Safety ◽  
Production System ◽  
Food Production ◽  
Large Scale ◽  
Production Data ◽  
Blockchain Technology ◽  
Large Scale Integration ◽  
Scale Integration ◽  
Food Production System

<div><div><div><p>Food safety is an important issue in today’s world. Traditional agri-food production system doesn’t offer easy traceability of the produce at any point of the supply chain, and hence, during a food-borne outbreak, it is very difficult to sift through food production data to track produce and origin of the outbreak. In recent years, blockchain based food production system has resolved this challenge, however, none of the proposed methodologies makes the food production data easily accessible, traceable and verifiable by consumers or producers using mobile/edge devices. In this paper, we propose FoodSQRBlock (Food Safety Quick Response Block), a blockchain technology based framework, which digitizes the food production information, and makes it easily accessible, traceable and verifiable by the consumers and producers by using QR codes. We also propose a large scale integration of FoodSQRBlock in the cloud to show the feasibility and scalability of the framework, and experimental evaluation to prove that.</p></div></div></div>

Sign in / Sign up

Export Citation Format

Share Document