Prediction of weathering behaviour of bauxite residue and speciation and mobility of its trace elements through geochemical modelling

Author(s):  
Prithviraj Gupta
Author(s):  
Prithviraj Gupta ◽  
Sara J. Couperthwaite ◽  
Talitha C. Santini ◽  
Rachel A. Pepper ◽  
Graeme J. Millar

2010 ◽  
Vol 40 (12) ◽  
pp. 1639-1649 ◽  
Author(s):  
Christian J. Engelsen ◽  
Hans A. van der Sloot ◽  
Grethe Wibetoe ◽  
Harald Justnes ◽  
Walter Lund ◽  
...  

Soil Research ◽  
2019 ◽  
Vol 57 (5) ◽  
pp. 419 ◽  
Author(s):  
E. Di Carlo ◽  
C. R. Chen ◽  
R. J. Haynes ◽  
I. R. Phillips ◽  
R. Courtney

The generation of bauxite residue, the by-product of alumina manufacture from bauxite ore, has increased to a global stockpile of some 3 billion tonnes. In the absence of significant reuse options, the bulk of this residue is contained within bauxite residue disposal areas (BRDAs), which can occupy a significant footprint and pose potential environmental risk. Rehabilitation (amendment and vegetation establishment) is viewed as a significant strategy for eventual closure of the BRDAs. Major limitations to plant growth in residue include high pH, salinity, and sodicity, as well as deficiencies of macro- and micronutrients and potentially elevated levels of trace elements. The physical properties are also problematic as residue mud consolidates to form a solid mass that waterlogs easily or dries to form a massive structure, whereas sand has a very low water- and nutrient-holding capacity. A variety of techniques have been trialled at the pot level and at the field scale to bring about reductions in residue alkalinity and sodicity to promote plant establishment, with gypsum amendment viewed as the most promising. Other amendment strategies include use of organic additions or fertiliser applications, and a combined approach can lead to improved residue properties and successful plant establishment. Few reports have focused on longer term plant growth, self-propagation, and residue interactions under field conditions. There is some evidence that rehabilitated residue can support vegetation growth and soil development in the short to medium term (~15 years), but key issues such as nutrient availability and plant uptake require further study. Although rehabilitated residue can support diverse microbial communities and demonstrate trajectory analogous to soil, the ability of rehabilitated residue to support soil biota and key ecosystem processes warrants further study. The bioavailability of trace elements within rehabilitated sites and potential food chain transfer are relatively unexplored. These areas need careful study before definitive statements can be made regarding the sustainability of residue rehabilitation strategies.


Metals ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1281
Author(s):  
Jin-Seok Kim ◽  
Nag-Choul Choi ◽  
Ho Young Jo

Bauxite residue (red mud), which is an industrial byproduct, contains valuable trace elements. Solid NH4Cl was used as a chlorinating agent during the microwave heating of red mud to convert trace elements into soluble metal chloride. Red mud was heated using microwave ovens under various conditions (i.e., with the addition of solid NH4Cl and with a range of microwave output powers and microwave heating times). Leaching tests were then conducted using deionized (DI) water on the microwave-heated red mud to leach trace elements from red mud. V, Cr, and As were selectively leached from the microwave heated red mud slurry (30% water content), whereas Mn, Cu, Co, Ni, Zn, and Pb were selectively leached from the microwave-heated red mud with the addition of solid NH4Cl. The oxides of V, Cr, and As in red mud could be transformed into metal chlorides by chlorination, which are insoluble in water, or could be easily volatilized when red mud was microwave-heated in the presence of solid NH4Cl. On the other hand, the oxides of Mn, Cu, Co, Zn, Ni, and Pb in red mud could be heated rapidly by microwave irradiating, resulting in metal chlorides in the presence of solid NH4Cl. Those metal chlorides are relatively soluble in water, leading to higher leaching efficiency for microwave-heated red mud with the addition of solid NH4Cl. Experimental results suggest that trace elements from red mud can be selectively leached by microwave heating of red mud without or with the addition of solid NH4Cl.


2016 ◽  
Vol 56 (12) ◽  
pp. 2074 ◽  
Author(s):  
M. Laurence ◽  
N. Stephens ◽  
G. Megirian

Bauxite residue (Alkaloam®) applied to pasture has been shown significantly to improve pasture production on sub-fertile soil, such as those found in south-west Western Australia, because it increases soil pH. There are concerns that animals grazing Alkaloam-amended pasture may suffer ill health through heavy metal accumulation in tissues, and that this effect could be amplified over generations. There are additional concerns that eating exposed animals, or direct exposure to Alkaloam, may be detrimental to human health. Although some literature exists there are no studies that address these issues when the application of Alkaloam occurred several years (20) before grazing. This investigation examined the heavy metal and trace element accumulation in the tissues of Dorper lambs (1 year old) and their dams, Dorper ewes (4–5 years old) grazing Alkaloam-amended pasture. The experiment was conducted on two sites grazed in the Peel region of Western Australia: one site in Coolup, the Control site (Site C), that had had no application of Alkaloam and one site in Wagerup, the Treatment site (Site T), that had had 20 tonnes per hectare of Alkaloam applied in 1993. Both sites had uniform soil and pasture type during the growing season. Samples of soil and pasture were collected at each site. Differences in trace element concentrations, pH and conductivity between sites were determined. Ten ewes and 10 lambs were randomly selected at each site, removed and killed on the same day for gross examination of the kidney, liver and lung tissue. Samples of the tissues were collected for histopathological examination and chemical analysis to determine concentrations of trace elements. Depending on the concentration of trace elements in each sample, a logistical regression with binomial regression or an ANOVA was performed to determine differences in concentrations between ages, sites and any interactions between age and site. Sheep from Site T had significantly higher concentrations of copper, manganese and molybdenum, whereas sheep from Site C had significantly higher concentrations of cobalt, iron, lead, nickel, selenium, strontium and zinc in tissues. Ewes had significantly higher concentrations of barium, cadmium, cobalt, iron and strontium whereas lambs had significantly higher concentrations of copper, manganese and molybdenum in tissues. Ewes had higher concentrations of cadmium in the kidney compared with lambs, and ewes from Site C had significantly higher concentrations than ewes from Site T. Ewes and lambs from Site C had significantly higher concentrations of selenium in the liver compared with ewes and lambs from Site T. Concentrations of heavy metals (As, Hg, Pb, Th and U) were low in tissues of all sheep. The results show that whereas there were different elemental tissue concentrations between sites and between ages of sheep, there were no detrimental trace element imbalances or accumulation of heavy metals that would cause ill health in any of the sheep that could be associated with the application of Alkaloam to pasture. It is unlikely that humans will suffer any ill effects as a consequence of eating exposed animals. This result supports the premise that bauxite residue can be safely applied to pasture to significantly improve pasture and animal production where animals graze pasture growing on sub-fertile soil.


Author(s):  
O.T. Woo ◽  
G.J.C. Carpenter

To study the influence of trace elements on the corrosion and hydrogen ingress in Zr-2.5 Nb pressure tube material, buttons of this alloy containing up to 0.83 at% Fe were made by arc-melting. The buttons were then annealed at 973 K for three days, furnace cooled, followed by ≈80% cold-rolling. The microstructure of cold-worked Zr-2.5 at% Nb-0.83 at% Fe (Fig. 1) contained both β-Zr and intermetallic precipitates in the α-Zr grains. The particles were 0.1 to 0.7 μm in size, with shapes ranging from spherical to ellipsoidal and often contained faults. β-Zr appeared either roughly spherical or as irregular elongated patches, often extending to several micrometres.The composition of the intermetallic particles seen in Fig. 1 was determined using Van Cappellen’s extrapolation technique for energy dispersive X-ray analysis of thin metal foils. The method was employed to avoid corrections for absorption and fluorescence via the Cliff-Lorimer equation: CA/CB = kAB · IA/IB, where CA and CB are the concentrations by weight of the elements A and B, and IA and IB are the X-ray intensities; kAB is a proportionality factor.


Author(s):  
D. A. Carpenter ◽  
Ning Gao ◽  
G. J. Havrilla

A monolithic, polycapillary, x-ray optic was adapted to a laboratory-based x-ray microprobe to evaluate the potential of the optic for x-ray micro fluorescence analysis. The polycapillary was capable of collecting x-rays over a 6 degree angle from a point source and focusing them to a spot approximately 40 µm diameter. The high intensities expected from this capillary should be useful for determining and mapping minor to trace elements in materials. Fig. 1 shows a sketch of the capillary with important dimensions.The microprobe had previously been used with straight and with tapered monocapillaries. Alignment of the monocapillaries with the focal spot was accomplished by electromagnetically scanning the focal spot over the beveled anode. With the polycapillary it was also necessary to manually adjust the distance between the focal spot and the polycapillary.The focal distance and focal spot diameter of the polycapillary were determined from a series of edge scans.


1979 ◽  
Vol 7 (6) ◽  
pp. 1330-1331
Author(s):  
E. D. WILLS

Sign in / Sign up

Export Citation Format

Share Document