scholarly journals ANALYSIS OF SUB-GRID MODELING EFFECTS IN THE SIMULATION OF THE SINGLE-PHASE TURBULENT FLOW IN AN INDUSTRIAL CYCLONE SEPARATOR

2012 ◽  
Vol 11 (1-2) ◽  
pp. 44
Author(s):  
R. V. Salvo ◽  
F. J. Souza ◽  
D. A. M. Martins
Keyword(s):  
Turbulence Modeling ◽  
Swirling Flow ◽  
Experimental Results ◽  
Navier Stokes ◽  
Cyclone Separator ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Volume Cell ◽  
Des Model

In the present work two turbulence modeling approaches, namely Large Eddy Simulation and Detached Eddy Simulation, are employed to predict turbulent, swirling flow within an industrial cyclone separator running at Reynolds number 267,000. The results from three LES models, Smagorinsky, dynamic and Yakhot, and the SST-DES model of Strelets have been compared to experimental results for the average axial and tangential velocities. The Navier-Stokes solver is based on an unstructured, finite volume, cell-centered algorithm such that the details of the geometry can be accurately represented. Based on the comparison with the experimental results, it has been found that the Yakhot model provides the most accurate predictions for the tangential velocities, whereas the dynamic LES and the Smagorinsky models overpredict it and the SST-DES model underpredicts it. However, the conclusions are different regarding the axial velocity. Implications of the turbulence modeling for the particle separation are discussed.

Current Capabilities of DES and LES for Submarines at Straight Course

2010 ◽  
Vol 54 (03) ◽  
pp. 184-196 ◽  
Author(s):  
N. Alin ◽  
R.E. Bensow ◽  
C. Fureby ◽  
T. Huuva ◽  
U. Svennberg
Keyword(s):  
Statistical Moments ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Complex Flow ◽  
First Order ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Actuator Disc ◽  
Rans Models ◽  
Coarse Grids

The flow around an axisymmetric hull, with and without appendages, is investigated using large eddy simulation (LES), detached eddy simulation (DES), and Reynolds averaged Navier Stokes (RANS) models. The main objectives of the study is to investigate the effect of the different simulation methods and to demonstrate the feasibility of using DES and LES on relatively coarse grids for submarine flows, but also to discuss some generic features of submarine hydrodynamics. For this purpose the DARPA Suboff configurations AFF1 (bare hull) and AFF8 (fully appended model) are used. The AFF1 case is interesting because it is highly demanding, in particular for LES and DES, due to the long midship section on which the boundary layer is developed. The AFF8 case represents the complex flow around a fully appended submarine with sail and aft rudders. An actuator disc model is used to emulate some of the effects of the propulsor for one of the AFF8 cases studied. Results for the AFF8 model are thus presented for both "towed" and "self-propelled" conditions, where as for the bare hull, only a "towed" condition is considered. For the AFF1 and the "towed" AFF8 cases experimental data are available for comparison, and the results from both configurations show that all methods give good results for first-order statistical moments although LES gives a better representation of structures and second-order statistical moments in the complex flow in the AFF8 case.

scholarly journals Scale-Adaptive Simulation of Unsteady Cavitation Around a Naca66 Hydrofoil

2019 ◽  
Vol 9 (18) ◽  
pp. 3696 ◽  
Author(s):  
Víctor Hidalgo ◽  
Xavier Escaler ◽  
Esteban Valencia ◽  
Xiaoxing Peng ◽  
José Erazo ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Pressure Coefficient ◽  
Experimental Results ◽  
Navier Stokes ◽  
Naval Academy ◽  
Eddy Simulation ◽  
Hydraulic Machinery ◽  
Adaptive Simulation ◽  
Large Eddy ◽  
Sas Model

The present paper focuses on the numerical simulation of unsteady cavitation around a NACA66 hydrofoil to improve the understanding of the cavitation effects on hydraulic machinery. For this aim, the Zwart–Gerber–Belamri cavitation model was updated and uploaded as a library file for OpenFOAM’s solvers using C++ language. Furthermore, the hybrid Reynold average Navier–Stokes (RANS)–large eddy simulation (LES) model k - ω SST scale adaptive simulation (SAS) was implemented as a turbulence model for the present study of scale adaptive simulation. For validation, numerical results were compared with experimental results obtained by Leroux at the Naval Academy Research Institute in France. In order to highlight the benefits in terms of computational consumption and reproduction of the phenomenon the k - ω SST SAS model was compared against implicit large eddy simulation (ILES). Results show that the cavitation evolution including the maximum vapor length, the detachment and the oscillation frequency were reproduced satisfactorily using k - ω SST SAS. Moreover, k - ω SST SAS results predicted a lower total vapor volume on time than ILES, which is related to observed pulses of pressure coefficient, C p , and those match fairly well with the experimental results. To summarize, the k - ω SST SAS model predicts with good accuracy unsteady cavitation behavior around hydrofoils and shows improved versatility over the ILES approach.

Numerical study of transonic cavity flows using large-eddy and detached-eddy simulation

2007 ◽  
Vol 111 (1117) ◽  
pp. 153-164 ◽  
Author(s):  
P. Nayyar ◽  
G. N. Barakos ◽  
K. J. Badcock
Keyword(s):  
Energy Content ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Complex Flow ◽  
Promising Alternative ◽  
Eddy Simulation ◽  
Massively Separated Flows ◽  
Large Eddy

Numerical analysis of the flow in weapon bays modelled as open rectangular cavities of length-to-depth (L/D) ratio of 5 and width-to-depth (W/D) ratio of 1 with doors-on and doors-off is presented. Flow conditions correspond to Mach and Reynolds numbers (based on cavity length) of 0·85 and 6·783m respectively. Results from unsteady Reynolds-averaged Navier-Stokes (URANS), large-eddy simulation (LES) and detached-eddy simulation (DES) are compared with the simulation methods demonstrating the best prediction of this complex flow. It was found that URANS was not able to predict the change of flow characteristics between the doors-on and doors-off configurations. In addition, the energy content of the cavity flow modes was much better resolved with DES and LES. Further, the DES was found to be quite capable for this problem giving accurate results (within 3dB of) experiments and appears to be a promising alternative to LES for modelling massively separated flows.

On the Investigation of Flow around the Square Cylinder Based on Different LES Models

2012 ◽  
Vol 594-597 ◽  
pp. 2676-2679
Author(s):  
Zhe Liu
Keyword(s):  
Flow Characteristics ◽  
Turbulence Models ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Square Cylinder ◽  
Rans Model ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Reynolds Averaged Navier Stokes ◽  
Les Model

Although the conventional Reynolds-averaged Navier–Stokes (RANS) model has been widely applied in the industrial and engineering field, it is worthwhile to study whether these models are suitable to investigate the flow filed varying with the time. With the development of turbulence models, the unsteady Reynolds-averaged Navier–Stokes (URANS) model, detached eddy simulation (DES) and large eddy simulation (LES) compensate the disadvantage of RANS model. This paper mainly presents the theory of standard LES model, LES dynamic model and wall-adapting local eddy-viscosity (WALE) LES model. And the square cylinder is selected as the research target to study the flow characteristics around it at Reynolds number 13,000. The influence of different LES models on the flow field around the square cylinder is compared.

Flow in a Mechanical Bileaflet Heart Valve at Laminar and Near-Peak Systole Flow Rates: CFD Simulations and Experiments

2005 ◽  
Vol 127 (5) ◽  
pp. 782-797 ◽  
Author(s):  
Liang Ge ◽  
Hwa-Liang Leo ◽  
Fotis Sotiropoulos ◽  
Ajit P. Yoganathan
Keyword(s):  
Heart Valve ◽  
Turbulence Modeling ◽  
Mechanical Heart Valve ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Cfd Simulations ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Flow Through

Time-accurate, fully 3D numerical simulations and particle image velocity laboratory experiments are carried out for flow through a fully open bileaflet mechanical heart valve under steady (nonpulsatile) inflow conditions. Flows at two different Reynolds numbers, one in the laminar regime and the other turbulent (near-peak systole flow rate), are investigated. A direct numerical simulation is carried out for the laminar flow case while the turbulent flow is investigated with two different unsteady statistical turbulence modeling approaches, unsteady Reynolds-averaged Navier-Stokes (URANS) and detached-eddy simulation (DES) approach. For both the laminar and turbulent cases the computed mean velocity profiles are in good overall agreement with the measurements. For the turbulent simulations, however, the comparisons with the measurements demonstrate clearly the superiority of the DES approach and underscore its potential as a powerful modeling tool of cardiovascular flows at physiological conditions. The study reveals numerous previously unknown features of the flow.

scholarly journals Turbulence Modeling a Review for Different Used Methods

2021 ◽  
Vol 39 (1) ◽  
pp. 227-234
Author(s):  
Khelifa Hami
Keyword(s):  
Turbulence Modeling ◽  
Stokes Equations ◽  
Turbulence Models ◽  
Simulation Models ◽  
Navier Stokes ◽  
Future Research ◽  
Detached Eddy Simulation ◽  
Navier Stokes Equations ◽  
Eddy Simulation ◽  
Complicated Geometries

This contribution represents a critical view of the advantages and limits of the set of mathematical models of the physical phenomena of turbulence. Turbulence models can be grouped into two categories, depending on how turbulent quantities are calculated: direct numerical simulations (DNS) and RANS (Reynolds Averaged Navier-Stokes Equations) models. The disadvantage of these models is that they require enormous computing power, inaccessible, especially for large and complicated geometries. For this reason, hybrid models (combinations between DNS and RANS methods) have been developed, for example, the LES (“Large Eddy Simulation”) or DES (“Detached Eddy Simulation”) models. They represent a compromise - are less precise than DNS, but more precise than RANS models. The results presented in this contribution will allow and facilitate future research in the field the choice of the model approach necessary for the case studies whatever their difficulty factor.

Some Observations on the Computational Sensitivity of Rotating Cavity Flows

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Tom Hickling ◽  
Li He
Keyword(s):  
Heat Transfer ◽  
Eddy Viscosity ◽  
Systematic Investigation ◽  
Navier Stokes ◽  
Cavity Flows ◽  
Detached Eddy Simulation ◽  
Bulk Fluid ◽  
Eddy Simulation ◽  
Rotating Cavity ◽  
Large Eddy

Abstract Across the open literature, there is no clear consensus on what the most suitable modeling fidelity is for rotating cavity flows. Although it is a widely held opinion that unsteady Reynolds-averaged-Navier–Stokes (URANS) approaches are unsuitable, many authors have succeeded in getting reasonable heat transfer results with them. There is also a lack of research into the validity of hybrid URANS/large eddy simulation (LES) type approaches such as detached eddy simulation (DES). This paper addresses these research challenges with a systematic investigation of a rotating cavity with axial throughflow at Grashof numbers of 3.03×109 and 3.03×1011. The disk near-wall layers remained laminar at both conditions, meaning that a turbulence model should not be active in these regions. The disk heat transfer was observed to affect the near-disk aerodynamics, which in turn affect the disk heat transfer: this feedback loop implies that conjugate heat transfer computations of rotating cavities may be worth investigating. On the shroud, additional eddy viscosity in URANS and DES was found to interfere with the formation of heat transfer enhancing streaks, whilst these were always captured by LES. DES exhibited a concerning behavior at the higher Grashof number. Locally generated eddy viscosity from the shroud was injected into the bulk fluid by the radial inflow. This contaminated the entire cavity with nonphysical modeled turbulence. As the radial inflow is a characteristic feature of rotating cavity flows, these results show that caution is necessary when applying hybrid URANS/LES approaches to this type of flow.

Prediction of Profile Losses by Means of Large-Eddy Simulation Including Turbulence Modeling Assessment

2017 ◽  
Author(s):  
Karsten Hasselmann ◽  
Stefan aus der Wiesche
Keyword(s):  
Large Eddy Simulation ◽  
Turbulence Modeling ◽  
Flow Behavior ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Eddy Simulation ◽  
Unsteady Separation ◽  
Power Spectral ◽  
Large Eddy ◽  
Experimental Values

In this contribution, a Large-Eddy Simulation (LES) analysis was carried out, to get detailed information about the unsteady flow behavior and loss generation in a turbine cascade at moderate Reynolds numbers. A comprehensive comparison study with experimental data was conducted to validate the LES results. Compared to Reynolds averaged Navier-Stokes (RANS) results, the LES shows a much better agreement with the measured values of the profile loss coefficient, downstream velocity profile, and blade pressure distribution. The unsteady separation and reattachment process was covered well by the LES approach. The power spectral density (PSD) profiles at several positions of the downstream wake were compared and analyzed. Although the results of the LES show mainly a good agreement with the experimental values, there are still some deviations at high frequency. In summery the present case study indicates the high potential of LES especially in case of moderate Reynolds numbers with flow separation.

scholarly journals CFD Investigation on Hydrodynamic Resistance of a Novel Subsea Shuttle Tanker

2021 ◽  
Vol 9 (12) ◽  
pp. 1411
Author(s):  
Yihan Xing ◽  
Marek Jan Janocha ◽  
Guang Yin ◽  
Muk Chen Ong
Keyword(s):  
High Efficiency ◽  
Navier Stokes ◽  
Hydrodynamic Resistance ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Large Eddy ◽  
Computational Fluid Dynamics Cfd ◽  
Carbon Dioxide Co2 ◽  
Subsea Pipelines

The Subsea Shuttle Tanker (SST) was proposed by Equinor as an alternative to subsea pipelines and surface tankers for the transportation of liquid carbon dioxide (CO2) from existing offshore/land facilities to marginal subsea fields. In contrast to highly weather-dependent surface tanker operations, the SST can operate in any condition underwater. Low resistance is paramount to achieving maximum range. In this paper, the resistance of the SST at an operating forward speed of 6 knots (3.09 m/s) and subject to an incoming current velocity of 1 m/s is computed using Computational Fluid Dynamics (CFD). The Delayed Detached Eddy Simulation (DDES) method is used. This method combines features of Reynolds-Averaged Navier–Stokes Simulation (RANS) in the attached boundary layer parts at the near-wall regions, and Large Eddy Simulation (LES) at the unsteady, separated regions near to the propeller. The force required to overcome forward resistance is calculated to be 222 kN and agrees well with experimental measurements available in the open literature. The corresponding power consumption is calculated to be 927 kW, highlighting the high efficiency of the SST. The method presented in this paper is general and can be used for resistance optimization studies of any underwater vessel.

Assessment of improved delayed detached eddy simulation in predicting unsteady flows and sound around a circular cylinder

2021 ◽  
pp. 2150384
Author(s):  
Bo Luo ◽  
Wuli Chu ◽  
Song Yan ◽  
Zhengjing Shen ◽  
Haoguang Zhang
Keyword(s):  
Circular Cylinder ◽  
Unsteady Flows ◽  
Navier Stokes ◽  
Detached Eddy Simulation ◽  
Numerical Resolution ◽  
Eddy Simulation ◽  
Delayed Detached Eddy Simulation ◽  
Unsteady Wake ◽  
Large Eddy ◽  
Computational Resources

Unsteady flows in the field of engineering are usually calculated by the Unsteady Reynolds-Averaged Navier–Stokes (URANS) owing to the low requirements for computational efforts. However, the numerical resolution of URANS, especially in predicting the unsteady wake flows and sound, is still questionable. In this work, unsteady flow and sound calculations of a circular cylinder are carried out using Improved Delayed Detached Eddy Simulation (IDDES) and the Ffowcs Williams–Hawkings (FW-H) analogy. The predicted results of this calculation are compared with those from the previous studies in the literature in terms of the mean and RMS of the velocity components as well as the sound pressure. The results show that IDDES retains much of the numerical accuracy of the Large Eddy Simulation (LES) approach in predicting unsteady flows and noise while requiring a reduced computational resources in comparison to LES. It is believed that the IDDES can be applied to calculate the complex unsteady flows and flow generated sound with reasonable accuracy in engineering field, which can be used as a promising method for scale-resolving simulations to avoid the expensive computational requirements of LES.

Sign in / Sign up

Export Citation Format

Share Document