scholarly journals NUMERICAL ANALYSIS OF THE AIR-FUEL MIXTURE IN INDIRECT AND DIRECT INJECTION OF FOUR-STROKE ENGINES

2019 ◽  
Vol 18 (2) ◽  
pp. 89
Author(s):  
G. G. Narcizo ◽  
D. A. Miranda
Keyword(s):  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Direct Injection ◽  
Fuel Mixture ◽  
Combustion Efficiency ◽  
Simulation Software ◽  
Injection System ◽  
Scholarly Work ◽  
Ansys Fluent ◽  
Dynamics Simulations

The quality of the air-fuel mixture in internal combustion engines directly affects the combustion efficiency, therefore a good design of the combustion chamber combined with the correct fuel injection system, can provide a better use of this mixture and increase the efficiency of the engine. Considering these aspects, this scholarly work presents a comparative study of the indirect injection system and direct fuel injection, analyzing the way the mixture behaves in these two conditions. For this, the Ansys Fluent simulation software was used, in which were applied computational fluid dynamics simulations of the air-fuel mixture. The objective of this scholarly work is to contribute to the development of the injection systems, enabling the improvement of new studies and developments of new nozzle models can be performed.

scholarly journals Combustion Thermodynamics of Ethanol, n-Heptane, and n-Butanol in a Rapid Compression Machine with a Dual Direct Injection (DDI) Supply System

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2729
Author(s):  
Ireneusz Pielecha ◽  
Sławomir Wierzbicki ◽  
Maciej Sidorowicz ◽  
Dariusz Pietras
Keyword(s):  
Heat Release ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Direct Injection ◽  
Combustion Process ◽  
Combustion Efficiency ◽  
Injection System ◽  
Rapid Compression Machine ◽  
Process Indicators ◽  
Rapid Compression

The development of internal combustion engines involves various new solutions, one of which is the use of dual-fuel systems. The diversity of technological solutions being developed determines the efficiency of such systems, as well as the possibility of reducing the emission of carbon dioxide and exhaust components into the atmosphere. An innovative double direct injection system was used as a method for forming a mixture in the combustion chamber. The tests were carried out with the use of gasoline, ethanol, n-heptane, and n-butanol during combustion in a model test engine—the rapid compression machine (RCM). The analyzed combustion process indicators included the cylinder pressure, pressure increase rate, heat release rate, and heat release value. Optical tests of the combustion process made it possible to analyze the flame development in the observed area of the combustion chamber. The conducted research and analyses resulted in the observation that it is possible to control the excess air ratio in the direct vicinity of the spark plug just before ignition. Such possibilities occur as a result of the properties of the injected fuels, which include different amounts of air required for their stoichiometric combustion. The studies of the combustion process have shown that the combustible mixtures consisting of gasoline with another fuel are characterized by greater combustion efficiency than the mixtures composed of only a single fuel type, and that the influence of the type of fuel used is significant for the combustion process and its indicator values.

scholarly journals Investigation Into Reactivity Separation Between Direct Injected and Premixed Fuels in RCCI Combustion Mode

2019 ◽  
Author(s):  
Ziming Yan ◽  
Brian Gainey ◽  
Deivanayagam Hariharan ◽  
Benjamin Lawler
Keyword(s):  
Thermal Efficiency ◽  
Fuel Injection ◽  
Direct Injection ◽  
Combustion Efficiency ◽  
High Reactivity ◽  
Injection System ◽  
Injection Timing ◽  
Nox Emissions ◽  
Light Duty ◽  
Primary Reference

Abstract This experimental study focuses on the effects of the reactivity separation between the port injected fuel and the direct injection fuel, the amount of external-cooled exhaust gas recirculation (EGR), and the direct injection timing of the high reactivity fuel on Reactivity Controlled Compression Ignition (RCCI) combustion. The experiments were conducted on a light-duty, single-cylinder diesel engine with a production GM/Isuzu engine head and piston and a retrofitted port fuel injection system. The global charge-mass equivalence ratio, ϕ′, was fixed at 0.32 throughout all of the experiments. To investigate the effects of the fuel reactivity separation, different Primary Reference Fuels (PRF) were port injected, with the PRF number varying from 50 to 90. To investigate the effects of EGR, an EGR range of 0 to 55% was used. To investigate the effects of the injection timing, an injection timing window of −65 to −45 degrees ATDC was chosen. The results indicate that there are several tradeoffs. First, decreasing the port injected fuel reactivity (increasing the PRF number) delays combustion phasing, decreases the combustion efficiency by up to 9%, increases the gross indicated thermal efficiency up to 22%, enhances the combustion sensitivity to the direct injection timing, and slightly increases the UHC, CO, and NOx emissions. Second, increasing the EGR percentage delays combustion phasing, lowers the peak heat release rate, and lowers the NOx emissions. The combustion efficiency first increases and then decreases with EGR percentage for high reactivity fuels (low PRF number), but only decreases for low reactivity fuels. Finally, delaying the injection timing advances combustion phasing and increases the combustion efficiency, but decreases the gross indicated thermal efficiency and increases the NOx emissions. Across all of the experiments, delays in CA50 increase the gross indicated thermal efficiency and decrease the combustion efficiency, which represents an inherent tradeoff for RCCI combustion on a light-duty engine.

scholarly journals Parametric investigation of a large two-stroke marine high-pressure direct injection engine by using computational fluid dynamics method

2020 ◽  
Vol 234 (3) ◽  
pp. 699-711
Author(s):  
Renyou Yang ◽  
Gerasimos Theotokatos ◽  
Dracos Vassalos
Keyword(s):  
Direct Injection ◽  
Gas Injection ◽  
Injection System ◽  
Injection Timing ◽  
Ansys Fluent ◽  
Engine Operation ◽  
Lateral Angle ◽  
Parametric Investigation ◽  
Injection Duration ◽  
Engine Power

This study aims at the parametric investigation of the gas injection system settings of a large marine two-stroke dual fuel engine by using a developed and customized CFD method in the ANSYS Fluent software. The investigated engine injection system parameters include the gas injection timing, the gas injection duration, the gas injector lateral angle, and the gas injector holes number. Based on the comparison of the predicted performance parameters for the closed-cycle processes, the results indicate that the gas injector lateral angle is the most significant parameter that affects the engine power as well as the NO and CO2 emissions. For satisfying the contradictory objectives of retaining the engine power and reducing the NO and CO2 emissions, appropriate design settings for the gas injection are recommended for the investigated engine operation in the gas mode at 75% load.

scholarly journals An Experimental and Modeling Study of HCCI Combustion Using n-Heptane

2009 ◽  
Vol 132 (2) ◽  
Author(s):  
Hongsheng Guo ◽  
W. Stuart Neill ◽  
Wally Chippior ◽  
Hailin Li ◽  
Joshua D. Taylor
Keyword(s):  
Low Temperature ◽  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Combustion Process ◽  
Injection System ◽  
Intake Manifold ◽  
Strong Impact ◽  
Oxides Of Nitrogen ◽  
Hcci Combustion ◽  
Modeling Study

Homogeneous charge compression ignition (HCCI) is an advanced low-temperature combustion technology being considered for internal combustion engines due to its potential for high fuel conversion efficiency and extremely low emissions of particulate matter and oxides of nitrogen (NOx). In its simplest form, HCCI combustion involves the auto-ignition of a homogeneous mixture of fuel, air, and diluents at low to moderate temperatures and high pressure. Previous research has indicated that fuel chemistry has a strong impact on HCCI combustion. This paper reports the preliminary results of an experimental and modeling study of HCCI combustion using n-heptane, a volatile hydrocarbon with well known fuel chemistry. A Co-operative Fuel Research (CFR) engine was modified by the addition of a port fuel injection system to produce a homogeneous fuel-air mixture in the intake manifold, which contributed to a stable and repeatable HCCI combustion process. Detailed experiments were performed to explore the effects of critical engine parameters such as intake temperature, compression ratio, air/fuel ratio, engine speed, turbocharging, and intake mixture throttling on HCCI combustion. The influence of these parameters on the phasing of the low-temperature reaction, main combustion stage, and negative temperature coefficient delay period are presented and discussed. A single-zone numerical simulation with detailed fuel chemistry was developed and validated. The simulations show good agreement with the experimental data and capture important combustion phase trends as engine parameters are varied.

Effect of Fuel Injection Pressure and Engine Speed on Performance, Emissions, Combustion, and Particulate Investigations of Gasohols Fuelled Gasoline Direct Injection Engine

2019 ◽  
Vol 142 (4) ◽  
Author(s):  
Nikhil Sharma ◽  
Avinash Kumar Agarwal
Keyword(s):  
Internal Combustion Engines ◽  
Fuel Injection ◽  
Driving Forces ◽  
Direct Injection ◽  
Engine Performance ◽  
Injection Pressure ◽  
Operating Conditions ◽  
Gasoline Direct Injection ◽  
Primary Alcohols ◽  
Renewable Fuel

Abstract Fuel availability, global warming, and energy security are the three main driving forces, which determine suitability and long-term implementation potential of a renewable fuel for internal combustion engines for a variety of applications. Comprehensive engine experiments were conducted in a single-cylinder gasoline direct injection (GDI) engine prototype having a compression ratio of 10.5, for gaining insights into application of mixtures of gasoline and primary alcohols. Performance, emissions, combustion, and particulate characteristics were determined at different engine speeds (1500, 2000, 2500, 3000 rpm), different fuel injection pressures (FIP: 40, 80, 120, 160 bars) and different test fuel blends namely 15% (v/v) butanol, ethanol, and methanol blended with gasoline, respectively (Bu15, E15, and M15) and baseline gasoline at a fixed (optimum) spark timing of 24 deg before top dead center (bTDC). For a majority of operating conditions, gasohols exhibited superior characteristics except minor engine performance penalty. Gasohols therefore emerged as serious candidate as a transitional renewable fuel for utilization in the existing GDI engines, without requirement of any major hardware changes.

Microscopic Spray Characteristics of Biodiesels Derived From Karanja, Jatropha, and Waste Cooking Oils

2020 ◽  
Vol 142 (12) ◽  
Author(s):  
Chetankumar Patel ◽  
Joonsik Hwang ◽  
Choongsik Bae ◽  
Rashmi A. Agarwal ◽  
Avinash Kumar Agarwal
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Injection Pressure ◽  
Axial Direction ◽  
Waste Cooking Oil ◽  
Injection System ◽  
Ambient Atmosphere ◽  
Ambient Conditions ◽  
Spray Characteristics ◽  
Spray Droplets

Abstract This study aims to assess the microscopic characteristics of Jatropha, Karanja, and Waste cooking oil-based biodiesels vis-a-vis conventional diesel under different ambient conditions in order to understand the in-cylinder processes, while using biodiesels produced from different feedstocks in the compression ignition engines. All test-fuels were injected in ambient atmosphere using a common-rail direct injection (CRDI) fuel injection system at a fuel injection pressure (FIP) of 40 MPa. Microscopic spray characteristics were measured using phase Doppler interferometer (PDI) in the axial direction of the spray at a distance of 60–90 mm downstream of the nozzle and at 0 to 3-mm distance from the central axis in the radial direction. All biodiesels exhibited relatively larger Sauter mean diameter (SMD) of the spray droplets and higher droplet velocities compared to baseline mineral diesel, possibly due to relatively higher fuel viscosity and surface tension of biodiesels. It was also observed that SMD of the spray droplets decreased with increasing distance in the radial and axial directions and the same trend was observed for all test-fuels.

Emission and Performance of a Lean-Premixed Gas Fuel Injection System for Aeroderivative Gas Turbine Engines

1994 ◽  
Author(s):  
Timothy S. Snyder ◽  
Thomas J. Rosfjord ◽  
John B. McVey ◽  
Aaron S. Hu ◽  
Barry C. Schlein
Keyword(s):  
Gas Turbine ◽  
Fuel Injection ◽  
Pressure Ratio ◽  
Combustion Efficiency ◽  
Injection System ◽  
Test Facility ◽  
Fuel Injection System ◽  
Moderate Pressure ◽  
Single Digit ◽  
Lean Premixed

A dry-low-NOx, high-airflow-capacity fuel injection system for a lean-premixed combustor has been developed for a moderate pressure ratio (20:1) aeroderivative gas turbine engine. Engine requirements for combustor pressure drop, emissions, and operability have been met. Combustion performance was evaluated at high power conditions in a high-pressure, single-nozzle test facility which operates at full baseload conditions. Single digit NOx levels and high combustion efficiency were achieved A wide operability range with no signs of flashback, autoignition, or thermal problems was demonsuated. NOx sensitivities 10 pressure and residence time were found to be small at flame temperatures below 1850 K (2870 F). Above 1850 K some NOx sensitivity to pressure and residence Lime was observed and was associated with the increased role of the thermal NOx production mechanism at elevated flame temperatures.

Conjugate Heat Transfer Analysis of a Small Annular Combustor With Centrifugal Fuel Injection System

2019 ◽  
Author(s):  
Rampada Rana ◽  
Alosri Prajwal ◽  
Gullapalli Sivaramakrishna ◽  
Raju Dharappa Navindgi ◽  
Nagalingam Muthuveerappan
Keyword(s):  
Structural Integrity ◽  
Fuel Injection ◽  
Operating Conditions ◽  
Heat Transfer Analysis ◽  
Injection System ◽  
Maximum Temperature ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Ansys Fluent ◽  
Annular Combustor

Abstract Over the years, the requirements of higher specific thrust and lower specific fuel consumption have been necessitating a continual increase in the maximum temperature and pressure in gas turbine engines. However, such an increase has a direct impact on the structural integrity of various modules of the engine; combustor being one of the severely affected modules. This makes the combustor designer’s task of achieving the targeted life of liner, the hottest component of combustor, a challenging one. Estimation of liner metal temperature, thereby arriving at the combustor life, is an essential part of the design process. In the present study, CHT analysis of a radial annular combustor has been carried out. RANS based analysis of a sector combustor with periodicity in flow and geometry has been performed at realistic engine operating conditions using ANSYS Fluent. Predicted liner metal temperatures have been compared with the measured data and a close agreement has been noted between them, the maximum variation being ± 10%.

scholarly journals Research on combustion process of gasoline homogenous charge compression ignition engine

2018 ◽  
Vol 184 ◽  
pp. 01013
Author(s):  
Corneliu Cofaru ◽  
Mihaela Virginia Popescu
Keyword(s):  
Experimental Research ◽  
Fuel Injection ◽  
Combustion Process ◽  
Fuel Mixture ◽  
Spark Ignition Engine ◽  
Injection System ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Homogenous Charge Compression Ignition

The paper presents the research designed to develop a HCCI (Homogenous Charge Compression Ignition) engine starting from a spark ignition engine platform. The chosen test engine was a single cylinder, four strokes provided with a carburettor. The results of experimental research data obtained on this version were used as a baseline for the next phase of the research. In order to obtain the HCCI configuration, the engine was modified, as follows: the compression ratio was increased from 9.7 to 11.5 to ensure that the air – fuel mixture auto-ignite and to improve the engine efficiency; the carburettor was replaced by a direct fuel injection system in order to control precisely the fuel mass per cycle taking into account the measured intake air-mass; the valves shape were modified to provide a safety engine operation by ensuring the provision of sufficient clearance beetween the valve and the piston; the exchange gas system was changed from fixed timing to variable valve timing to have the possibilities of modification of quantities of trapped burnt gases. The cylinder processes were simulated on virtual model. The experimental research works were focused on determining the parameters which control the combustion timing of HCCI engine to obtain the best energetic and ecologic parameters.

Sign in / Sign up

Export Citation Format

Share Document