FORMULATION AND EVALUATION OF RUTIN TRIHYDRATE EMULGEL

INDIAN DRUGS ◽  
2021 ◽  
Vol 57 (11) ◽  
pp. 87-92
Author(s):  
C Sushmitha ◽  
◽  
M.P. Kusuma ◽  
J Archana
Keyword(s):  
Drug Release ◽  
Water Solubility ◽  
Guar Gum ◽  
Ex Vivo ◽  
Normal Skin ◽  
Inflammatory Activity ◽  
In Vitro Drug Release ◽  
Anti Inflammatory ◽  
Semi Solid

Emulgels (emulsion gels) are a class of biphasic semi-solid formulations, having aqueous and non-aqueous phases, delivering both hydrophilic and lipophilic agents. The main advantage of an emulgel is that lipophilic drugs can be easily formulated as emulgels. Rutin trihydrate is an herbal drug used for topical treatment of inflammation. However, its poor water solubility (0.125 mg/ml) presents a hindrance for its local bioavailability and limits effective anti-inflammatory activity. The aim of the current study was to formulate and optimize rutin trihydrate emulgel to enhance its efficacy and stability. 28 formulations were developed with various types of gelling agents like Carbapol 934 (0.8 and 1% w/v), Xanthum gum (1.5 and 2% w/v), HPMCk15 (2, 2.5 and 3% w/v),HPMC K100 (2, 2.5% w/v), guar gum (1, 1.5 and 2% w/v), badam gum (1% w/v) and using various permeation enhancers like clove oil, eucalyptus oil and oil of orange (10 and12.5% v/v). The optimised formulation (f8) was yellow in colour, homogeneous with good consistency, possessed pH of 6.51±0.04 that is very close to that of normal skin (6-7), drug content of 98.7%, viscosity of 14,680cps at 30rpm, spreadability 13.5gm.cm/sec and extrudability 36.2% and in vitro drug release of 79.3% for 7 hrs, ex vivo drug release of 70.08% was stable for 3 months and was having comparable anti inflammatory activity with that of marketed formulation.

scholarly journals Solid Lipid Nanoparticles of Guggul Lipid as Drug Carrier for Transdermal Drug Delivery

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Praveen Kumar Gaur ◽  
Shikha Mishra ◽  
Suresh Purohit
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Lipid Nanoparticles ◽  
Inflammatory Activity ◽  
Physical Parameters ◽  
In Vitro Drug Release ◽  
Solid Lipid ◽  
Lipid Component ◽  
Anti Inflammatory

Diclofenac sodium loaded solid lipid nanoparticles (SLNs) were formulated using guggul lipid as major lipid component and analyzed for physical parameters, permeation profile, and anti-inflammatory activity. The SLNs were prepared using melt-emulsion sonication/low temperature-solidification method and characterized for physical parameters, in vitro drug release, and accelerated stability studies, and formulated into gel. Respective gels were compared with a commercial emulgel (CEG) and plain carbopol gel containing drug (CG) for ex vivo and in vivo drug permeation and anti-inflammatory activity. The SLNs were stable with optimum physical parameters. GMS nanoparticle 1 (GMN-1) and stearic acid nanoparticle 1 (SAN-1) gave the highest in vitro drug release. Guggul lipid nanoparticle gel 3 (GLNG-3) showed 104.68 times higher drug content than CEG in receptor fluid. The enhancement ratio of GLNG-3 was 39.43 with respect to CG. GLNG-3 showed almost 8.12 times higherCmaxthan CEG at 4 hours. The AUC value of GLNG-3 was 15.28 times higher than the AUC of CEG. GLNG-3 showed edema inhibition up to 69.47% in the first hour. Physicochemical properties of major lipid component govern the properties of SLN. SLN made up of guggul lipid showed good physical properties with acceptable stability. Furthermore, it showed a controlled drug release profile along with a promising permeation profile.

Evaluation of Anti-inflammatory Activity and In Vitro Drug Release of Ibuprofen-Loaded Nanoparticles Based on Sodium Alginate and Chitosan

2020 ◽  
Vol 45 (9) ◽  
pp. 7599-7609
Author(s):  
Sarra Bensouiki ◽  
Fouzia Belaib ◽  
Michèle Sindt ◽  
Pierre Magri ◽  
Sandrine Rup-Jacques ◽  
...  
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Inflammatory Activity ◽  
In Vitro Drug Release ◽  
Anti Inflammatory

scholarly journals Formulation and Evaluation of Sustained Release Matrix Tablets of Aceclofenac

2021 ◽  
Vol 4 (2) ◽  
pp. 99-109
Author(s):  
Priyanka Singh ◽  
Amit Kumar Shrivastava ◽  
Sachin Kumar ◽  
Manish Dhar Dwivedi
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Polymer Concentration ◽  
Matrix Tablets ◽  
Hydrophilic Polymers ◽  
Wet Granulation ◽  
Drug Release Profile ◽  
In Vitro Drug Release ◽  
Study Results

This study aimed to improve the dissolution rate of aceclofenac and release the drug in a controlled manner over a period of 24 hours. Matrix tablets were prepared by direct compression method, using hydrophilic polymers (HPMC/guar gum). Matrix tablets were prepared by wet granulation method using different hydrophilic polymers (HPMC/guar gum). Tablets were evaluated for in vitro drug release profile in phosphate buffer with pH 6.8 (without enzymes). The thickness and hardness of prepared tablets were 3.23 ± 0.035 to 3.28 ± 0.008 mm and 3.26 ± 0.115 to 3.60 ± 0.200 kg/cm2, respectively. The friability was within the acceptable limits of pharmacopoeial specifications (0.31 to 0.71%), which indicates the good mechanical strength of the tablets. Drug release was retarded with an increase in polymer concentration due to the gelling property of polymers. The in vitro drug release from the proposed system was best explained by Higuchi’s model, indicating that drug release from tablets displayed a diffusion-controlled mechanism. The results clearly indicate that guar gum could be a potential hydrophilic carrier in developing oral controlled drug delivery systems. Based on the study results, formulations F8 was selected as the best formulation.

scholarly journals In Vitro and Ex Vivo Evaluation of Nepafenac-Based Cyclodextrin Microparticles for Treatment of Eye Inflammation

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 709 ◽  
Author(s):  
Blanca Lorenzo-Veiga ◽  
Patricia Diaz-Rodriguez ◽  
Carmen Alvarez-Lorenzo ◽  
Thorsteinn Loftsson ◽  
Hakon Hrafn Sigurdsson
Keyword(s):  
Zeta Potential ◽  
Physicochemical Properties ◽  
Inflammatory Mediators ◽  
Ex Vivo ◽  
Posterior Segment ◽  
Inflammatory Activity ◽  
Commercial Formulation ◽  
Anti Inflammatory ◽  
Negative Zeta Potential

The aim of this study was to design and evaluate novel cyclodextrin (CD)-based aggregate formulations to efficiently deliver nepafenac topically to the eye structure, to treat inflammation and increase nepafenac levels in the posterior segment, thus attenuating the response of inflammatory mediators. The physicochemical properties of nine aggregate formulations containing nepafenac/γ-CD/hydroxypropyl-β (HPβ)-CD complexes as well as their rheological properties, mucoadhesion, ocular irritancy, corneal and scleral permeability, and anti-inflammatory activity were investigated in detail. The results were compared with a commercially available nepafenac suspension, Nevanac® 3 mg/mL. All formulations showed microparticles, neutral pH, and negative zeta potential (–6 to –27 mV). They were non-irritating and nontoxic and showed high permeation through bovine sclera. Formulations containing carboxymethyl cellulose (CMC) showed greater anti-inflammatory activity, even higher than the commercial formulation, Nevanac® 0.3%. The optimized formulations represent an opportunity for topical instillation of drugs to the posterior segment of the eye.

scholarly journals DEVELOPMENT AND EVALUATION OF TRANSDERMAL FILM CONTAINING SOLID LIPID NANOPARTICLES OF RIVASTIGMINE TARTRATE

2017 ◽  
Vol 9 (6) ◽  
pp. 85
Author(s):  
G. Ravi ◽  
N. Vishal Gupta
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Ex Vivo ◽  
Skin Permeation ◽  
Cost Effective ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Study Results ◽  
Transdermal Film

Objective: The objective of present investigation was to develop rivastigmine tartrate transdermal film employing factorial design.Methods: The formulations were designed by Design-Expert software-version10. A series of films were prepared by solvent casting method using polymers, plasticizer, permeation enhancer and other solvents. Transdermal films were evaluated for flatness, drug content, tensile strength, in vitro drug release and ex vivo skin permeation study.Results: The flatness was found 100% (percentage) for all film formulations. The drug content of transdermal film was found in the range of 96.51±0.2 to 98.81±0.3%. The tensile strength of transdermal film was found in the range of 6.28±0.06 to 11.56±0.03 N/mm2 (newton/millimeter2) and in vitro drug release at 24th h (hour) was found in the range of 86.24±0.25 to 96.1±0.48%% for various formulations and ex vivo skin permeation study results at 24th h was found in the range of 85.83±0.74 to 97.36±0.93%.Conclusion: These results support the feasibility of developing transdermal film of rivastigmine tartrate for human applications. Thus, transdermal delivery of rivastigmine tartrate film is a safe, painless and cost effective drug delivery system for Alzheimer’s patients.

scholarly journals Characterization of bilayered matrix-type mucoadhesive buccal films containing tizanidine hydrochloride and piroxicam

2021 ◽  
Vol 20 (11) ◽  
pp. 2241-2248
Author(s):  
M. Yasmin Begum ◽  
Ali Alqahtani
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Residence Time ◽  
Ex Vivo ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Folding Endurance ◽  
Buccal Films

Purpose: To formulate and characterize tizanidine hydrochloride (TZN) and piroxicam (PRX)-loaded bilayer mucoadhesive buccal films with an intention to improve the bioavailability and patient compliance in pain management.Methods: Bilayer buccal films were prepared by solvent evaporation technique using hydroxypropyl methylcellulose (HPMC) 15cps and polyvinylpyrrolidone (PVP K30 as immediate release (IR) layer forming polymers and HPMC K15 M, PVP K 90 along with various muco adhesive polymers (Carbopol P934, sodium alginate, etc), as sustained release (SR) layer forming polymers. The prepared films werecharacterized for thickness, weight variation, folding endurance, surface pH, swelling index,mucoadhesive strength, in vitro residence time, in vitro drug release, ex vivo permeation and drug release kinetics.Results: The prepared films were of largely uniform thickness, weight and drug content. Moisture loss (%) and folding endurance were satisfactory. Surface pH was compatible with salivary fluid. Disintegration time was 85 s for F1 and 115 s for F2 of IR films. In vitro dissolution studies showed 99.12 ± 1.2 % (F1) and 90.36 ± 1.8 % (F2) were released in 45 min. Based on the above results, F1 was chosen as the optimum formulation to be combined with SR layer of TZN. Amongst the SR layers of TZN in vitro drug release. The findings show that of F2 was 98.38 ± 0.82 % and correlated with ex vivo release. Drug release followed zero order release kinetics and mechanism of drug release was non-Fickian type diffusion. In vitro residence time was greater than 5 h.Conclusion: The findings show that the bilayer buccal films demonstrate the dual impact of deliveringPRX instantly from the IR layer, with good controlled release and permeation of TZN from the SR layer, thus providing enhanced therapeutic efficacy, drug bioavailability and patient compliance.

scholarly journals Formulation and Evaluation of Tacrolimus Transdermal Gel

2019 ◽  
Vol 9 (6-s) ◽  
pp. 110-118
Author(s):  
CH. Suryakumari ◽  
M. Narender ◽  
K. Umasankar ◽  
Siva Prasad Panda ◽  
S.N. Koteswara Rao ◽  
...  
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Release Kinetics ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Abdominal Skin ◽  
Ex Vivo Permeation ◽  
Ex Vivo Permeation Study ◽  
Carbopol 934P

The present investigation is concerned with formulation and evaluation of Transdermal gels of Tacrolimus, anti-psoriasis drug, to circumvent the first pass effect and to improve its bioavailability with reduction in dosing frequency and dose related side effects. Twelve formulations were developed with varying concentrations of polymers like Carbopol 934P, HPMCK4M and Sodium CMC. The gels were tested for clarity, Homogeneity, Spreadability, Extrudability, Viscosity, surface pH, drug Content uniformity, in-vitro drug diffusion study and ex-vivo permeation study using rat abdominal skin. FTIR studies showed no evidence on interactions between drug, polymers and excipients. The best in-vitro drug release profile was achieved with the formulation F4 containing 0.5 mg of exhibited 6 hr drug release i.e. 98.68 % with desired therapeutic concentration which contains the drug and Carbopol 934p in the ratio of 1:2. The surface pH, drug content and viscosity of the formulation F4 was found to be 6.27, 101.3% and 3, 10,000cps respectively. The drug permeation from formulation F4 was slow and steady and 0.89gm of tacrolimus could permeate through the rat abdominal skin membrane with a flux of 0.071 gm hr-1 cm-2. The in-vitro release kinetics studies reveal that all formulations fit well with zero order kinetics followed by non-Fickian diffusion mechanism. Keywords: Transdermal gel, Viscosity, In-vitro drug release, In-vitro drug release kinetics study, Ex-vivo permeation study

Sign in / Sign up

Export Citation Format

Share Document