scholarly journals The Performance of Carbon Fibre Composites as ICCP Anodes for Reinforced Concrete Structures

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Chinh Van Nguyen ◽  
Paul Lambert ◽  
Pal Mangat ◽  
Fin O’Flaherty ◽  
Graeme Jones
Keyword(s):  
Reinforced Concrete ◽  
Carbon Fibre ◽  
Cathodic Protection ◽  
Concrete Structures ◽  
Steel Corrosion ◽  
Concrete Surface ◽  
Reinforced Concrete Structures ◽  
Reinforcing Steel ◽  
Fibre Composites ◽  
Carbon Fibre Composites

Cathodic protection has been proven to be one of the most widely applicable and cost-effective solutions for tackling steel corrosion in reinforced concrete. In this study, the possible use of carbon fibre composites, which are primarily used to strengthen concrete members, has been investigated as impressed current cathodic protection anodes. Carbon fibre anodes have been assessed in both concrete and calcium hydroxide solution. Two bonding mediums incorporating epoxy and geopolymer have also been investigated. The results demonstrate that epoxy resin can be used for bonding carbon fibre fabric anodes to reinforced concrete structures while geopolymer is more effective for bonding carbon fibre reinforced polymer (CFRP) rod into preformed grooves in the concrete surface. The dissolution of carbon fibre anode appears to stablise after a period of time, dependent upon the size and shape of the anode and applied voltage and current. Based on the present results, a maximum current density of 128 mA/m2 of reinforcing steel area is recommended for the operation of CFRP fabric anode and 64 mA/m2 of reinforcing steel area for that of CFRP rod anode.

scholarly journals Corrosion protection of reinforcing steel reinforced concrete structures of transport structures

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Alexander Bulkov ◽  
Michail Baev ◽  
Igor Ovchinnikov
Keyword(s):  
Reinforced Concrete ◽  
Corrosion Protection ◽  
Concrete Structures ◽  
Steel Corrosion ◽  
High Strength ◽  
Curing Temperature ◽  
Reinforced Concrete Structures ◽  
Reinforcing Steel ◽  
Steel Reinforced Concrete ◽  
Advantages And Disadvantages

The influence of reinforcing steel corrosion on the durability of reinforced concrete structures of transport structures and the degree of knowledge of this problem is considered. It is specified that the protection of reinforcing steel from corrosion is not able to completely replace the correct design and use of high-strength concrete. But it is able to extend the life of reinforced concrete structures. It is noted that corrosion of the reinforcement leads to a decrease in the structural strength due to wear and tear and by a third of the period of operation of reinforced concrete structures, as a result of which transport structures collapse. As an example of the detrimental effect of corrosion of reinforcing steel on the durability of transport structures, examples of accidents of bridges and overpasses caused by this type of corrosion are given. As a result, a conclusion is drawn on the advisability of ensuring a sufficient level of corrosion protection of reinforcing steel to achieve the required durability of reinforced concrete structures of transport structures. The types and causes of corrosion processes in reinforcing steel reinforced concrete structures are described. The compositions and technologies of anticorrosive protection are examined and analyzed. Comparison of the compositions of anticorrosive protection of reinforced concrete structures is carried out according to the following criteria: consumption, density, viability, curing temperature and the number of components of the composition. A comparison of anti-corrosion protection technologies is carried out on the basis of the following indicators: line dimensions, productivity and consumption of energy resources. A comparison is also made of the cost of using various anti-corrosion protection technologies. Based on the data obtained, the advantages and disadvantages of the considered compositions and technologies of corrosion protection are determined. As a result, the most effective and technologically advanced method of corrosion protection of steel reinforcement of reinforced concrete structures of transport structures is selected.

Passive corrosion control and active corrosion prevention of the reinforced concrete structures by electrochemical chloride removal and inhibitors

2013 ◽  
Vol 61 (1) ◽  
pp. 32-37 ◽  
Author(s):  
Guofu Qiao ◽  
Yi Hong ◽  
Tiejun Liu ◽  
Jinping Ou
Keyword(s):  
Reinforced Concrete ◽  
Concrete Structures ◽  
Concrete Cover ◽  
Reinforced Concrete Structures ◽  
Reinforcing Steel ◽  
Corrosion Control ◽  
Cell Potential ◽  
Content Type ◽  
Chloride Removal ◽  
Active Corrosion

Purpose – The aim of this paper was to investigate the passive corrosion control and active corrosion protective effect of the reinforced concrete structures by electrochemical chloride removal (ECR) method and inhibitors approach, respectively. Design/methodology/approach – The concentration of aggressive chloride ion distributed from the reinforcing steel to the surface of the concrete cover was analyzed during the ECR processes. Besides, the half-cell potential, the concrete resistance R c , the polarization resistance R p and the capacitance of double layer C dl of the steel/concrete system were used to characterize the electrochemical performance of the concrete prisms. Findings – The effectiveness of ECR could be enhanced by increasing the amplitude of potential or prolonging the time. Inhibitor SBT-ZX(I) could successfully prevent the corrosion development of the reinforcing steel in concrete. Originality/value – The research provides the scientific basis for the practical application of ECR and inhibitors in the field.

Damage of Reinforced Concrete Structures due to Steel Corrosion

2015 ◽  
Vol 1111 ◽  
pp. 187-192
Author(s):  
Corina Sosdean ◽  
Liviu Marsavina ◽  
Geert de Schutter
Keyword(s):  
Reinforced Concrete ◽  
Building Materials ◽  
Structural Integrity ◽  
Colorimetric Method ◽  
Concrete Structures ◽  
Steel Corrosion ◽  
Degradation Process ◽  
Reinforced Concrete Structures ◽  
Chloride Ingress ◽  
Rc Structures

Reinforced concrete (RC) became one of the most widely used modern building materials. In the last decades a great interest has been shown in studying reinforcement corrosion as it became one of the main factors of degradation and loss of structural integrity of RC structures. The degradation process is accelerated in the case of RC structures situated in aggressive environments like marine environments or subjected to de-icing salts. In this paper it is shown how steel corrosion of the embedded rebars occurs and how this affects the service life of reinforced concrete structures. Also, an experimental study regarding the combined effect of carbonation and chloride ingress was realized. Samples with and without rebars were drilled from a RC slab which was stored in the laboratory for two years. Non-steady state migration tests were realized in order to determine the chloride profile, while the carbonation depth was measured using the colorimetric method based on phenolphthalein spraying. It was concluded that carbonation has a significant effect on chloride ingress, increasing it.

Sign in / Sign up

Export Citation Format

Share Document